Oval iron boiler with lid and handle, capacity four gallons (15 litres). Made by T. & C. Clark & Co., Wolverhampton, England. T. & C. Clark & Company Limited was founded in 1795 by Thomas and Charles Clark. Based at Shakespeare Foundry, Wolverhampton, it became one of the largest foundries in the area.These cooking pots were used by the local pioneers to cook their meals over an open fire. The flames from the fire turned the pots black.Oval iron boilers with lid and handle of various capacity : 2½ gallon, 3 gallon, 5 gallon and 6 gallon. Made by T. & C. Clark & Co., Wolverhampton, England. T. & C. Clark & Company Limited was founded in 1795 by Thomas and Charles Clark. Based at Shakespeare Foundry, Wolverhampton, it became one of the largest foundries in the area.T. and C. Clark with their makers markcooking, iron pots, moorabbin pioneers, cast iron, t & c clark & company

Roger Mitchell reports on a night at the 3UZ studio and the story behind the psychologist behind the microphone. Referred to as "the launching pad for a new Uniting Church presence on the radio." The Rev. Dr Paul Moore is an ordained minister of the Uniting Church and a psychologist.Paul Moore sitting opposite Sjaak Kusters being interviewed on radio 3UZ 927.Identification of the persons and the C&N edition 20/2/85 pp. 20-23.moore, paul, 3uz, sunday evening program

Print out of Matron Moore's opening address at the official opening of the north annexe of Tatura Museum. Invited guest speaker, former Matron Beatrice Moore gave a concise and interesting insight into the establishment and history of Camp 1 hospital.2 clear plastic sleeves with 4 pages of printed material. "Tatura POW - Internment camps- camp 1 hospital by Matron Beatrice Moore (Ex AANS)". camp 1 hospital, matron moore, tatura museum

This pair of brass altar vases is from the St. Nicholas Seamen’s Church, 139 Nelson Place, Williamstown, Victoria, during religious services there. The Church was operated by the Mission to Seamen organisation. Each vase is inscribed with the donors' names and the year of presentation - Margaret R. Pearson 1944, Mrs B Raybould 1944, - and the maker's name T. Gaunt & Co. The two donors presented the vases to St Nicholas Seamen's Church in Williamstown as part of the furniture and furnishings for the new church that officially opened in 1944. T. Gaunt & Co. engraved on both vases. T. Gaunt & Co. of Melbourne, is a manufacturer, importer and retailer of a wide variety of goods including jewellery, clocks and watches, navigational and measuring instruments, dinnerware, glassware and ornaments. Thomas Gaunt's photograph was included in an album of security identity portraits of members of the Victorian Court, Centennial International Exhibition, Melbourne, 1888. THE MISSIONS TO SEAMEN (Brief History: for more, see our Reg. No. 611, Set of Pews) The Missions to Seamen, an Anglican charity, has served seafarers of the world since 1856 in Great Britain. It symbol is a Flying Angel, inspired by a Bible verse. Today there are centr4es in over 200 ports world-wide where seamen of all backgrounds are offered a warm welcome and provided with a wide range of facilities. In Victoria the orgainsation began in Williamstown in 1857. It was as a Sailors’ Church, also known as ‘Bethel’ or the ‘Floating Church’. Its location was an old hulk floating in Hobson’s Bay, Port of Melbourne. It soon became part of the Missions to Seamen, Victoria. In the year 2000 the organisation, now named Mission to Seafarers, still operated locally in Melbourne, Portland, Geelong and Hastings. The Ladies’ Harbour Lights Guild was formed in 1906 to support the Missions to Seamen in Melbourne and other centres such as Williamstown. Two of the most significant ladies of the Guild were founder Ethel Augusta Godfrey and foundation member Alice Sibthorpe Tracy (who established a branch of the Guild in Warrnambool in 1920). The Guild continued its work until the 1960s. In 1943 a former Williamstown bank was purchased for the Missions to Seaman Club. The chapel was named St Nicholas’ Seamen’s Church and was supported by the Ladies’ Harbour Lights Guild, the Williamstown Lightkeepers’ Auxiliary and the League of Soldiers’ and Sailors’ Friends. It ceased operation in 1966. A Missions to Seamen Chapel and Recreation Room was a significant feature of ports during the late 1800s and into the 1900s. It seemed appropriate for Flagstaff Hill to include such a representation within the new Maritime Village, so the Melbourne Board of Management of Missions to Seamen Victoria gave its permission on 21st May 1979 for the entire furnishings of the Williamstown chapel to be transferred to Flagstaff Hill. The St Nicholas Seamen’s Church was officially opened on October 11, 1981 and closely resembles the Williamstown chapel. This par of vases is significant historically for its origin in the St Nicholas Mission to Seamen's Church in Williamstown, established in 1857 to cater for the physical, social, and spiritual needs of seafarers. It originated in Bristol, England when a Seamen's Mission was formed in 1837. The connection of pair of vases to the original donation to the Mission to Seamen highlights the strong community awareness of the life of people at sea, their dangers and hardships, and their need for physical, financial, spiritual and moral support. Vase: pair of two polished brass altar vases, round, pear-shaped, bulbous body on a round pedestal, two neck rings and flared lips. Inscriptions on both vases in script around the base. Made by T. Gaunt & Co. One was presented to the church by Margaret R Pearson and the other presented by Mrs B. Raybould in 1944 The vases are part of the St Nicholas Seamen's Church Engraved on the 625.1 "Presented By Margaret R. Pearson 1944." Engraved on 625.2 "Presented By Mrs B. Raybould. 1944." Both engraved "T GAUNT & Co"flagstaff hill maritime museum and village, flagstaff hill, warrnambool, maritime museum, maritime village, shipwreck coast, great ocean road, religion, religious service, st nicholas seamen’s church, williamstown, missions to seamen victoria, brass vases, metal craft, brassware, altar vase, church vase, mrs r raybould, margaret r pearson, t gaunt & co, church furnishing

List attached to one photograph reads, "Back row, A. Dwight, T. Wilkins, A. Paris, Mrs. G. Clark, N. Hargraves, B. Covell, E. Lane. Centre, ? Morris, V. Cooper, M. Clark, Miss Calahan, P. Bamford, Rose Whiter, J. Paine, D. Dare, E. Blood. Front, W. Dwight, C. Paris, L. Lane, R. Skerrett, ??"

The Universal Acoustic Coupler was made and would have been used to connect a telephone to dial a computer remotely. The control panel is under the wooden flap. There is a power switch, full duplex switch, 500 Ma Fuse, CCITT Port. When not in use it can be folded up into a small timber carry case with handle.Wooden box with two sections that open. Top section hinged and folds back. inside are controls and cables for connecting to a computer. Instructions for use are on the lid. Front section has clips and folds down to a phone to placed in "speakers". English maker's plate and Melbourne supplier's plate with A.P.O. Permit No. C74/8/903 Serial No. 775326 moore reed, universal acoustic coupler, telephone, remote connection, computer connection

This item is part of the Federation University Art Collection. The Art Collection features over 2000 works and was listed as a 'Ballarat Treasure' in 2007. See '3rd Year Exhibition 1992' Program (005803)Wheel thrown stoneware lidded jar, decorated with incised and glazed poppies. Signed on base. art, artwork, ceramic, craig moore, ceramics

Plaster marquette, mounted on small pedestal, of James Moore, second Catholic Bishop of Ballarat by sculptor Commons of Ballarat. Commons work is mainly evidenced in headstone work at cemeteries but this demonstrates his ability in modelling and sculpture.Dr Moore titled to front of base of bust and Commons to back.commons, james moore, bishop, ballarat, sculptor.

F & T Industries Limited financial and corporate details to be given to Stegbar Limited in accordance with Companies Act, 1961.Typewritten, foolscap, 6 pages.

Letter from Ian Sharp to Justice Moore informing him of the appointment of Mary Gaudron as a Deputy President. Press release from Minister for Labour, Clyde Cameron in connection of the appointment.Letter from Ian Sharp to Justice Moore informing him of the appointment of Mary Gaudron as a Deputy President. Press release from Minister for Labour, Clyde Cameron in connection of the appointment.justice moore, mary gaudron, clyde cameron

T. Browns Furniture Warehouse photo taken around c 1870's. Four people standing outside the front of the furniture warehouse. The two story building has two display windows divided into three panes. The entrance door is glass with five arch windows on the second story. The address is 113 Main Street Stawell, later the site of the Coles store.Photograph appears to be taken from an original sepia photo of T. Brown's Furniture Warehouse. The two story building has two display windows on the ground floor with four people standing on the footpath outside the building.T. Brown's Furniture Warehouse Ironmongers T. Brown's Timber Merchant stawell t. browns furniture warehouse business

64 pages, illustrated.

Pattison Collection This item is from the ‘Pattison Collection’, a collection of books and records that was originally owned by the Warrnambool Mechanics’ Institute, which was founded in Warrnambool in 1853. By 1886 the Warrnambool Mechanics’ Institute (WMI) had grown to have a Library, Museum and Fine Arts Gallery, with a collection of “… choice productions of art and valuable specimens in almost every branch and many wonderful national curiosities are now to be seen there, including historic relics of the town and district.” It later included a School of Design. Although it was very well patronised, the lack of financial support led the WMI in 1911 to ask the City Council to take it over. In 1935 Ralph Pattison was appointed as City Librarian to establish and organise the Warrnambool Library as it was then called. When the WMI building was pulled down in 1963 a new civic building was erected on the site and the new Warrnambool Library, on behalf of the City Council, took over all the holdings of the WMI. At this time some of the items were separated and identified as the ‘Pattison Collection’, named after Ralph Pattison. Eventually, the components of the WMI were distributed from the Warrnambool Library to various places, including the Art Gallery, Historical Society and Flagstaff Hill. Later some were even distributed to other regional branches of Corangamite Regional Library and passed to and fro. It is difficult now to trace just where all of the items have ended up. The books at Flagstaff Hill Maritime Village generally display stamps and markings from Pattison as well as a variety of other institutions including the Mechanics’ Institute itself. RALPH ERIC PATTISON Ralph Eric Pattison was born in Rockhampton, Queensland, in 1891. He married Maude Swan from Warrnambool in 1920 and they set up home in Warrnambool. In 1935 Pattison accepted a position as City Librarian for the Warrnambool City Council. His huge challenge was to make a functional library within two rooms of the Mechanics’ Institute. He tirelessly cleaned, cleared and sorted a disarrayed collection of old books, jars of preserved specimens and other items reserved for exhibition in the city’s museum. He developed and updated the library with a wide variety of books for all tastes, including reference books for students; a difficult task to fulfil during the years following the Depression. He converted all of the lower areas of the building into a library, reference room and reading room for members and the public. The books were sorted and stored using a cataloguing and card index system that he had developed himself. He also prepared the upper floor of the building and established the Art Gallery and later the Museum, a place to exhibit the many old relics that had been stored for years for this purpose. One of the treasures he found was a beautiful ancient clock, which he repaired, restored and enjoyed using in his office during the years of his service there. Ralph Pattison was described as “a meticulous gentleman whose punctuality, floorless courtesy and distinctive neat dress were hallmarks of his character, and ‘his’ clock controlled his daily routine and his opening and closing of the library’s large heavy doors to the minute.” Pattison took leave from 1942 to 1945 to serve in the Royal Australian Navy, Volunteer Reserve as Lieutenant. A few years later he converted one of the Museum’s rooms into a Children’s Library, stocking it with suitable books for the younger generation. This was an instant success. In the 1950’s he had the honour of being appointed to the Victorian Library Board and received more inspiration from the monthly conferences in Melbourne. He was sadly retired in 1959 after over 23 years of service, due to the fact that he had gone over the working age of council officers. However, he continued to take a very keen interest in the continual development of the Library until his death in 1969. The Pattison Collection, along with other items at Flagstaff Hill Maritime Village, was originally part of the Warrnambool Mechanics' Institute’s collection. The Warrnambool Mechanics’ Institute Collection is primarily significant in its totality, rather than for the individual objects it contains. Its contents are highly representative of the development of Mechanics' Institute libraries across Australia, particularly Victoria. A diversity of publications and themes has been amassed, and these provide clues to our understanding of the nature of and changes in the reading habits of Victorians from the 1850s to the middle of the 20th century. The collection also highlights the Warrnambool community’s commitment to the Mechanics’ Institute, reading, literacy and learning in the regions, and proves that access to knowledge was not impeded by distance. These items help to provide a more complete picture of our community’s ideals and aspirations. The Warrnambool Mechanics Institute book collection has historical and social significance for its strong association with the Mechanics Institute movement and the important role it played in the intellectual, cultural and social development of people throughout the latter part of the nineteenth century and the early twentieth century. The collection of books is a rare example of an early lending library and its significance is enhanced by the survival of an original collection of many volumes. The Warrnambool Mechanics' Institute’s publication collection is of both local and state significance. The Poetical Works of Thomas Moore Author: Thomas Moore Publisher: Gall & InglisThe label on spine cover with typed text 82? MOO Pastedown front endpaper has a sticker from Warrnambool Mechanics Institute and Free Library Front loose endpaper has a sticker from Corangamite Regional Library Service Flyleaf has a stamp from Warrnambool Mechanics Institute warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, shipwrecked-artefact, book, the poetical works of thomas moore, thomas moore, warrnambool mechanics’ institute, pattison collection, warrnambool library, ralph eric pattison, corangamite regional library service, warrnambool city librarian, mechanics’ institute library, victorian library board, warrnambool books and records, warrnambool children’s library

Photograph of Private Rupert James Cavanagh MOORE 6852 22nd Battalion and 3rd Australian Machine Gun Company - Enlisted on 6/2/1917 at Wangaratta and killed in action on 13/7/1918 in France aged 25 yearsUnframed copy of sepia photograph of group of men in uniform and a bulldog mascot in front of corrugated tin building.Attached to photograph - Pte RJC Moore kneeling front row first left (no information as to where photo taken)private rupert james cavanagh moore 6852, wangaratta, kia, ww1

Original Owner: William 'Bill' George Campbell, No 36263 RAN served on the Bataan from 27.6.1950 - 6.6.1951. HMS Bataan was commissioned in 1945, to late to see service in WW2, it later served in the Korean War.Piece of the Ship, BATAAN. Small piece of wood with blue, white & grey painting of a ship on 1 side. Name plaque attached HMAS BATAAN D191. Name plaque on rear, K Moore (possible maker).“HMAS BATAAN D191” “K Moore”military history - souvenirs - navy, illustrations, bataan

Copy of Studio portrait of 6852 Private Rupert James Cavanagh Moore, 22nd Battalion, of Wangaratta, Vic., (seated), and two other unidentified soldiers of 22nd Battalion. Pte Moore, a printer prior to enlisting on 6 February 1917, embarked from Melbourne on HMAT Ascanius on 11 May 1917 with the 19th Reinforcements. He was killed in action in France on 13 July 1918, at the age of 25. Reproduction copy of black and white portrait of three uniformed men two standing and one seated in front.Attached to photograph - Private Rupert James Cavanagh Moore (seated) Enlisted in Wangaratta 6/2/1917 Killed in action in France 13/7/1918rupert james cavanagh moore, wangaratta, 22nd battalion, ww1, kia, 3rd machine gun battalion

Established in 1906, Frank Moore soon became well known amongst discerning tradespeople for the quality & accuracy of his tools. The Company was acquired by John Shaw & Son in 1945 & James Neill & Co in 1970. Currently part of the Bower Meteorology UK Group, they still produce superb tools & measuring instruments in Sheffield. The subject item is made from high-grade carbon silver tool steel with the patented 'Firm Lock' joint, that identifies the maker as Moore & Wright.A tool used for external measurement of items made by a maker who patented the "firm lock" jointing system now used on many different types of tools in many different industries. These items are now collectible and quite rare as a result are sought by tool collectors in the USA and UK.‘Firm Joint’ external measuring calipers believed made by Moore & Wright. Impressed into the metal "L A J S" (Probably the owner and company that used the item nothing to do with manufacturing) flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, calipers, callipers, external calipers, outer caliper, pottery tools, masonry tools, glass making tools, external measurement

Report - four pages - stapled in top left hand corner, titled "PCC - by F R Thompson", describing the control systems in a PCC tramcar, eg No. 980. Refers to drawings that are not included. Describes the control circuits, car drive, equipment, electric brakes, emergency dynamic braking, and service braking.trams, tramways, tramcars, controllers, electrical engineering, electrical equipment, motors, electric traction, pcc

This set of calipers was used for measuring and marking in the planning and making of components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This calliper is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This calliper was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Calipers, metal, two arms joined by hexagonal bolt. Made by Moore & Wright, Sheffield, England. Maker’s name pressed into metal on arm. Use to measure thickness of materials. This set of calipers is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”. “MOORE & WRIGHT / SHEFFIELD ENGLAND”flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ship model sovereign of the seas, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, technical drawing instrument, calipers for drawing and measuring, moore & wright of sheffield england, sovereign of the sea, ship model, hobby, ship model tool, english war ship, measuring instrument

This Ski Tow component came from one of the first T-Bars at Falls Creek, Victoria. Summit and Village T-Bars were built in 1961 followed by the Link Lift and Sun Valley in 1967.This item is significant because it is part of one of the earliest T-Bars at Falls Creek and illustrates the changes in their construction over time.T-Bar Ski Tow from one of the first T-Bars at Falls Creek, it is made of wood and metal.t-bars falls creek, falls creek, summit t-bar, village t-bar

Portrait of Right Rev. D. Mooreright rev. d. moore, bishop, ballarat diocese

Building T Mount Mount Helen CampusBuilding T Mount Helen Campus / Brutalist style architecture / middle section of T building adjacent to Building A brutalism, federation university mount helen campus, buildings, mount helen campus, building t

T. & C. Clark & Company Limited was based at Shakespeare Foundry in Wolverhampton England and was founded in 1795 by Thomas and Charles Clark. The company grew to be one of the largest iron foundries in Wolverhampton and were pioneering in the manufacture of enamelled cast iron cookware and sanitary wares. The company's product range included thousands of items, both domestic and industrial. T. & C. Clark were pioneers in the use of enamelled cast ironware, after taking out a patent in 1839 guaranteeing their products to be free of lead or arsenic. The company became the largest employer in Wolverhampton employing between 600 to 700 people.The item is significant as it was used as a domestic kitchen item to boil water safely without the concern that the metal may contain lead or arsenic as earlier cooking utensils had. Cast Iron Kettle no lid Kettle made by T & C Clarke England. T and C Clark and Co, London. No. 2, 5 pints capacityflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, flagstaff hill maritime village, great ocean road, kettle, cook ware, kitchen ware, cast iron kettle, t c clark ltd