Glassling pin with cork at one end. Paper pictures have been pasted inside rolling pin and it contains a white powder which is probably flour.domestic items, food preparation

Belonged to Elizabeth Downard after she was married (circa early 1940's). Was used by her until the 1990's. Donated to Southern Sherbrooke Historical Society by Susan Heywood-Downard.Wooden cylindrical central part with wooden handles on either side joined to a metal rod in which extends the length of the rolling pin. Used to flatten dough.cooking

Steel upright cooker with flat bi-fold hinged lid, handles. Comprising cabinet, cooking utensils (egg slide, ladle, rolling pin), petrol operated burner belowRange 4range cooker, cooker

Biscuit dough was put into the forcer/case/cylinder and the wooden pin pressed down to force dough out as a shaped biscuit. This would have been used in use in an Orbost home in the mid 20th century.This item is representative of kitchen utensils in common use in working class kitchens in 20th century prior to the common availability of packaged biscuits.Biscuit paste forcer made up of a metal barrel with a ring for hanging at top and a wooden plunger with a knob handle on top. This is shaped like a rolling pin. Biscuit mix is forced through the end of the tube to create fancy-looking biscuits.domestic kitchen food-technology biscuit- forcer baking appliances

Rolling pins have been found to have existed in several early civilizations and glass pins were especially popular in the first half of the 20th century. They were mostly filled with very cold water or ice when pastry dough was being rolled but sometimes they were filled with hot water, depending on the food preparation being rolled. They could still be found in some kitchens today. This item is retained as a reminder of a household item that was used in the past but may still be of use today.This is a clear glass cylindrical object with two glass handles at each end. One end is enclosed and the other is open and this end would have originally had a stopper of some kind, probably a cork. The letter ‘M’ is embedded into the enclosed end. ‘M’household items, history of warrnambool

The butter stamp rolling pin was used in The Orbost Butter factory.It was rolled across the butter in a wooden box, lined with a wax paper.Bicarbonate of soda was added to the butter to stop it from going rank.The first shipment in about 1893 to England went rank and was only good for axle grease on wagons and carts.The milk was brought to the factory by horse and dray.Most people would take the whey home for their pigs,which were abundant on the farms in the Orbost district. The Orbost Butter and Produce Co. Ltd was registered on June 1st 1893 and was an important source of income to the Orbost district. Large, hand carved, round wooden roller with handle at each end. There is a central carved word, with a pattern of raised squares either side of the carved word and an uncarved area at either end of the roller. The stamp rests on a wooden plinth. "AUSTRALIA" carved in reverse around the width.orbost-butter-factory dairy butter

Before factory production became commonplace in medicine, dispensing was considered an art and pill machines such as these were a vital component of any chemist’s collection. This machine dates back to the days when your local chemist or apothecary bought, sold, and manufactured all his own drugs and medicines to everybody who lived within the local community. In Victorian times, there was no such thing as off-the-shelf medicine. Every tablet, pill, suppository, ointment, potion, lotion, tincture and syrup to treat anything from a sore throat to fever, headaches or constipation, was made laboriously by hand, by the chemist. Pill machines such as these first appeared in the mid-1700s and quickly became a staple of the Victorian chemist’s shop. A ‘pill mass’ of medicinal powders mixed with a binding agent would be hand-rolled into a pipe on the tile at the back of the machine. This would then be placed across the grooved brass plate and cut into equal-sized pills using the corresponding side of the roller. Once all the necessary ingredients for the pills had been measured and ground with a pestle and mortar a final ingredient was poured in, syrup – this acted as a binding-agent. You could then roll it into a sausage shape. The largest part of the machine is the board. This is set at an angle and is comprised of the rolling surface, the cutting grooves, and the collection-tray. The large flat surface is for rolling out the pill-paste into the sausage shape. This is then rolled towards the brass cutting-grooves. The paddle (the second piece) is flipped over so that the grooves there line up with the grooves on the board. Rollers on the ends of the paddle roll against the brass edges of the board, and they guide the paddle straight across the grooves, taking the pill-mass with it. The grooves on the paddle and the board slice up the pill-mass and, after rolling the thing back and forth a couple of times like a rolling-pin, the circular pills roll off the grooves and into the tray at the bottom. https://galwaycitymuseum.ie/blog/collections-spotlight-victorian-pill-making-machine/?locale=en The collection of medical instruments and other equipment in the Port Medical Office is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Pill making device including a grooved base board and grooved sliding board with two pill moulds.None.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, pills, pill maker, medicine, health

Used as tBefore factory production became commonplace in medicine, dispensing was considered an art and pill machines such as these were a vital component of any chemist’s collection. This machine dates back to the days when your local chemist or apothecary bought, sold, and manufactured all his own drugs and medicines to everybody who lived within the local community. In Victorian times, there was no such thing as off-the-shelf medicine. Every tablet, pill, suppository, ointment, potion, lotion, tincture and syrup to treat anything from a sore throat to fever, headaches or constipation, was made laboriously by hand, by the chemist. Pill machines such as these first appeared in the mid-1700s and quickly became a staple of the Victorian chemist’s shop. A ‘pill mass’ of medicinal powders mixed with a binding agent would be hand-rolled into a pipe on the tile at the back of the machine. This would then be placed across the grooved brass plate and cut into equal-sized pills using the corresponding side of the roller. Once all the necessary ingredients for the pills had been measured and ground with a pestle and mortar a final ingredient was poured in, syrup – this acted as a binding-agent. You could then roll it into a sausage shape. The largest part of the machine is the board. This is set at an angle and is comprised of the rolling surface, the cutting grooves, and the collection-tray. The large flat surface is for rolling out the pill-paste into the sausage shape. This is then rolled towards the brass cutting-grooves. The paddle (the second piece) is flipped over so that the grooves there line up with the grooves on the board. Rollers on the ends of the paddle roll against the brass edges of the board, and they guide the paddle straight across the grooves, taking the pill-mass with it. The grooves on the paddle and the board slice up the pill-mass and, after rolling the thing back and forth a couple of times like a rolling-pin, the circular pills roll off the grooves and into the tray at the bottom. https://galwaycitymuseum.ie/blog/collections-spotlight-victorian-pill-making-machine/?locale=enhe companion item to pill-maker base, item 488.2The collection of medical instruments and other equipment in the Port Medical Office is culturally significant, being an historical example of medicine from late 19th to mid-20th century.Pill making device including a grooved base board and grooved sliding board with two pill mouldsNone.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, pill making, pill mould, medicine, health

Chains are available in a variety of link shapes and sizes. They have many uses on sailing vessels, such as part of anchoring systems or loading cargo onboard the ships. A link called a shackle is used as a quick and flexible way to join two pieces of chain. Sometimes the shackle needs a tool to remove it. A shackle punch like this one will do the job. A modern term for a similar tool, that also has a handle, is a ‘breakdown’ tool. It is designed for aligning and driving pins in and for removing bolts, rivets and pins. This shackle punch has a handle with six flat sides that prevent it from rolling around when stored. It has a fine shank that tapers down to the end. The tool is placed on the join of the shackle, and then the end of that handle is hit with a hammer until the join breaks apart. The shipwright’s tools on display in the Great Circle Gallery are connected to the maritime history of Victoria through their past owner, user and donor, Laurie Dilks. Laurie began his career as a shipwright in the mid-1900s, following in the wake of the skilled carpenters who have over many centuries used their craft to build and maintain marine vessels and their fittings. You can see Laurie’s inscription on the tool called a ‘bevel’. Laurie worked for Ports and Harbours, Melbourne, for over 50 years, beginning in the early 1960s. He and a fellow shipwright inscribed their names on a wheelhouse they built in 1965; the inscription was discovered many decades later during a repair of the plumbing. Many decades later Laurie worked on the Yarra moving barges up and down the river and was fondly given the title ‘Riverboat Man’ His interest in maritime history led him to volunteer with the Maritime Trust of Australia’s project to restore and preserve the historic WWII 1942 Corvette, the minesweeper HMAS Castlemaine, which is a sister ship to the HMAS Warrnambool J202. Laurie Dilks donated two handmade displays of some of his tools in the late 1970s to early-1980s. The varnished timber boards displayed the tools below together with brass plaques. During the upgrade of the Great Circle Gallery Laurie’s tools were transferred to the new display you see there today. He also donated tools to Queenscliffe Maritime Museum and Clunes Museum.The shipwright’s tools on display in the Great Circle Gallery are connected to the maritime history of Victoria through their past owner, user and donor, Laurie Dilks. Laurie began his career as a shipwright at Ports and Harbours in Melbourne in the mid-1900s, following in the wake of the skilled carpenters who have over many centuries used their craft to build and maintain marine vessels and their fittings.A shackle punch; a metal tool with six flat sides on the handle and the shank tapers inwards to a rouded point. It once belonged to shipwright Laurie Dinks.flagstaff hill, warrnambool, great ocean road, shipwreck coast, maritime museum, maritime village, shipwright, carpenter, shipbuilding, ship repairs, hand tool, equipment, ship maintenance, cooper, tool, marine technology, shackle punch, breakdown tool, chains, links, laurie dilks, l dilks, port and harbours melbourne

Essential item for kitchen of 1950'sRound, smooth, wooden central section with wooden handles each end. Painted greendomestic items, cooking

Glass rolling with open ends , possibly used with iced water for rolling out pastry.domestic items, food preparation

Yields information about Sydney tramcars and that some trams were transferred to Ballarat in about 1907, but does not give detail.Letter to W. Jack dated 4/7/1939 from J. Ross, Secretary to the Department of Road Transport and Tramways NSW and attached handwritten list of tram classes, number and horsepower of motors red pencil and ink. Letter typed. Pages held together by brass pin clip folded out. Advises that some tramcars were sold to Ballarat about 1907. Record updated and images added 19/8/2013trams, tramways, sydney tramcars, rolling stock, ballarat

Produced to celebrate a person being a member of the Transport Health Fund for 50 years. The fund started as the Tramways Benefit Society (a Friendly Society) in 1888 and was renamed during 1980s first as the Transport Friendly Society and then Transport Health. It was absorbed by HCF on 1/11/2021. Badge provided to Fred Turner, Inspecting Foreman (Rolling Stock) of the MMTB during the 1970s and 1980s.Tells part of the story of the Transport Industry health benefits funds.Badge - Metal - die stamped with Transport Health logo - enamel paint - green, gold and white with a lapel pin clip on the rear.tramways, tfs, friendly society, transport health, badges, benefit society, medical