Typical scabbard for the Pattern 1907 Sword Bayonet as used on the Short, Magazine Lee Enfield Rifle during World War 1. This Pattern was introduced in 1915. Leather Sword-Bayonet Scabbard with steel top-mount and chape for Hooked Quillion Bayonet (Item 0131). Teardrop stud for attachment to either a leather or webbing bayonet frog. Lithgow 'Star' trademark.

Swords were a common item of equipment of Japanese officers and soldiers in WWII. Representative of souvenirs brought back following the end of WWII.Japanese Samuari Sword with 70mm hand guard with wooden handle wrapped with red and white and brown tape - blade length 700mm. Common souvenir brought back by returning servicemen from the Southwest Pacific area following the Japanese surrender.japan, samurai, sword, wwii, world war two

WW2 Sword Donated by Mr Peter CottonWWII Sword metal with metal handle and hilt with clip that scures it in Scabbard when sheathed. Metal handle has xxx pattern. D shaped hilt. Refer 0063-02 (Scabbard)) Hilt extends out 3mm from the rear of the blade to protect the users hand and fingers.Number 74428 recorded on blade near handle.

Noted with Sword. This Japanese sword was received by 2/8th Australian Field Regiment at the surrender at Miri, Borneo in 1945. The Regiment served in the Middle East (1940-43) as part of the 9th Australian Division. It's final action was in Boreo, once again with 9th Division. A Japanese Officer's sword. Hasornate inlay of shell covered with flat braided cord. Flat braided strap with tassles -brown and blue- Top end of hilt is leather with gold guilt scrolling. Brass very ornate with lotus. Scabbard is steel with ornate decorations. Steel blade.

Ref See "FLEMING". 1. THIS COAT OF ARMS WAS ONE OF THE KINGDOM OF PRUSSIA'S. The sword and the mace pattern was used between about 1803 - 1898. (It was superseded by a sword and orb with a cross surmounted on the ord). This second pattern lasted til 1918 with the fall of the House of Hohenzouern). 2. CHR REISSER was a well known instrument maker in those days. 3. ULM is a town in Wurtemberg, Germany.This is a brass bugle. On top is a crest, it is set in a raised circle. It features an eagle wearing a crown - wings spread. One talon has a sword, the other talon has what appears to be a mace. The mouthpiece is secured with a short brass chain.Stamped at opening of the outside is "CHR REISSER" "ULM"ww1, bueles, germanic, bugle

Swords were issued to Australian Light Horse in 1918. They were part of the equipment of Light Horse ln period 1920 -1940. Carried by 8/13 VMR Heritage Troop during 1980s.Display potential and occasional ceremonial use.British Model 1908 cavalry sword steel blade 890mm long, composition handle with steel hand-guard painted khaki green. Steel scabbard with 2 fixed rings painted khaki green.On handguard 2 RMA MBY 340sword, sabre, cavalry, light horse, military, weapon

This altar and rear reredos were part of the original furnishings of the St Nicholas' Mission to Seamen's Church at 139 Nelson Place, Williamstown, Victoria. The Church was operated by the Mission to Seamen organisation. The reredos was donated to the Williamstown chapel by Miss. M. Breaks, in memoriam Miss. L.A. Breaks, who served a very active part in the Seamen's Mission, and the altar was donated by Mr and Miss J R Schutt. THE MISSIONS TO SEAMEN (Brief History: for more, see our Reg. No. 611, Set of Pews) The Missions to Seamen was an Anglican charity that served seafarers of the world since 1856 in Great Britain. It symbol is a Flying Angel, inspired by a Bible verse. Today there are centres in over 200 ports worldwide where seamen of all backgrounds are offered a warm welcome and provided with a wide range of facilities. In Victoria, the organisation began in Williamstown in 1857 as a Sailors’ Church, also known as ‘Bethel’ or the ‘Floating Church’ in an old hulk floating in Hobson’s Bay, Port of Melbourne. It soon became part of the Missions to Seamen, Victoria. In the year 2000 the organisation, now named Mission to Seafarers, still operated locally in Melbourne, Portland, Geelong and Hastings. The Ladies’ Harbour Lights Guild was formed in 1906 to support the Missions to Seamen in Melbourne and other centres such as Williamstown. Two of the most significant ladies of the Guild were founder Ethel Augusta Godfrey and foundation member Alice Sibthorpe Tracy (who established a branch of the Guild in Warrnambool in 1920). The Guild continued its work until the 1960s. In 1943 a former Williamstown bank was purchased for the Missions to Seaman Club. The chapel was named St Nicholas’ Seamen’s Church and was supported by the Ladies’ Harbour Lights Guild, the Williamstown Lightkeepers’ Auxiliary and the League of Soldiers’ and Sailors’ Friends. It ceased operation in 1966. A Missions to Seamen Chapel and Recreation Room was a significant feature of ports during the late 1800s and into the 1900s. It seemed appropriate for Flagstaff Hill to include such a representation within the new Maritime Village, so the Melbourne Board of Management of Missions to Seamen Victoria gave its permission on 21st May 1979 for the entire furnishings of the Williamstown chapel to be transferred to Flagstaff Hill. The St Nicholas Seamen’s Church was officially opened on October 11, 1981, and closely resembles the Williamstown chapel. This altar and reredos are significant historically for its origin in the St Nicholas Mission to Seamen's Church in Williamstown, established in 1857 to cater for the physical, social, and spiritual needs of seafarers. It originated in Bristol, England when a Seamen's Mission was formed in 1837. They are historically significant for their connection to the Ladies Lightkeepers’ Auxiliary, an organisation of women, formed to support seafarers. The connection of this furniture to the Mission to Seamen and to the Ladies Lightkeepers’ Auxiliary highlights the strong community awareness of the life of people at sea, their dangers and hardships, and their need for physical, financial, spiritual and moral support. Altar and reredos or altar panel, wooden. The timber is panelled, stained and has a varnished finish. The base has a detachable vertical panel with the decoration of a sword and two anchors, the reredos has a cross on a panel. It was made by Hadwen and Houghton, Malvern, Victoria. A plaque at the bottom right edge is marked with the maker's name. The altar is part of the St Nicholas Seamen's Church collection.On removable panel; logo of [sword and two anchors] On bottom right of base: "Hadwen and Houghton, Malvern"flagstaff hill maritime museum and village, flagstaff hill, warrnambool, maritime museum, maritime village, shipwreck coast, great ocean road, religion, religious service, st nicholas seamen’s church, williamstown, missions to seamen victoria, altar, reredos, church furniture, religious furniture, miss m breaks, miss l a breaks, mr and miss j r schutt., worship service

Farquhar McCrae (1807-50) was born at Westbrook near Edinburgh, into a distinguished Scottish family. He was educated at the University of Edinburgh and graduated MD in 1827. After a sojourn in Paris he joined the staff of the general hospital at Chatham. Here he suffered an injury during a dissection, which impaired his health for the rest of his life. He was appointed curator of the museum at Chatham, and put together a notable collection of pathological specimens. In 1838 he sought to resign on the grounds of ill health, and was then offered a posting with the 6th (Inniskilling) Dragoons. But with his health still poor, he decided to emigrate to a kinder climate, and arrived in Melbourne aboard the barque Midlothian. McCrae set up practice in Bourke Street with his brother-in-law, David Thomas. Both were pioneers in the use of anæsthetics. McCrae was the first to introduce chloroform, Thomas ether. Sometime after 1841 McCrae moved to Sydney, where he was one of the first medical practitioners appointed to the staff of the Sydney Infirmary and Dispensary. He died in Sydney at the age of 43 years. The sword is a dress sword of the 6th Dragoons. Made by Henry Wilkinson of Pall Mall, it is 38 inches (96.5cm) long and has an elaborately engraved and highly polished steel blade. Being a ceremonial weapon, the blade is quite blunt, and the gilt guard bears the crown and monogram of Queen Victoria, which dates the sword to late 1837 or 1838. The grip is bound in snakeskin and the sword is carried in a leather scabbard with brass mounts. It remains as one of the important links to the pioneering days of Melbourne, and early medical practice in Australasia.Sword, ceremonial, steel with brass decoration and a steel handle, highly decorated, in a scabbard of patterned black leather covered metal, brass tipped, 100 cm long. It belonged to Farquhar McCrae.

This type of bayonet was reputed to have used by British troops during the ill fated Zulu War.Long lived extensively used during its llfe.Bayonet Sword 1860 Martini Henry Rifle. The pattern 1853/ 72 was called a brushed model as they were modified from 20mm diameter to 18.1 mm diameter by a process then called brushed to fit the new martini henry rifle. The 2nd battalion 24th foot had been in south Africa longer and still had the older pattern bayonet instead of the newer 1876 pattern socket bayonet which had been issued to 1st battalion at Isandlawana The M1853/72 Martini - henry bayonet comes complete with a brass mounted leather scabbard.(No scabbard included with this example) 1860 Martin Henry Bayonet Sword.(No scabbard included with this example)martine henry bayonet, circ 1860

Japanese Model 1899 Cavalry SwordJapanese Model 1899 Cavalry Sword This Japanese Model 1899 Cavalry Sword has a interesting hilt in that the grip is of wood with a metal backstrap. The wood is probably is very hard, and has been nicely checkered. The checkering continues right through on to the metal backstrap, giving a very interesting effect. The pommel is smooth and round, with a spanner type flush mounted nut which most likely acts to retain the tang. There is also a screw and spanner that is retaining the grip. The pommel is smooth and round, with a spanner type flush mounted nut which most likely acts to retain the tang. This Japanese Model 1899 Cavalry Sword has a interesting hilt in that the grip is of wood with a metal backstrap. The wood is probably is very hard, and has been nicely checkered. The pommel is smooth and round, with a spanner type flush mounted nut which most likely acts to retain the tang. The scabbard is a heavy duty steel example which exactly matches the steel used to construct the hilt. The scabbard is perfectly straight throughout, with a single carrying band and ring.A number is stamped near the hilt on the shoulder of the blade " 96982"japanese model 1899 cavalry sword, metal scabbard

WWII Historical significance with some information of the Dandenong area.Black and white framed photo of 408537 Sgt R.R.E. Swords 23 Sep 1912 - 21 Jan 1943. This photograph is a tribute to the late Robert Richard Falkiner Swords. 'Bob' as he was known to his friends and most townsfolk of Dandenong and it's people. His older brother James, served in the First World War and later was a founding member of the Dandenong RSL Sub-Branch, formed in 1919, was its second President and also served a term as Honorary Secretary and Treasurer. James was the Editor of Dandenong's first newspaper, the Dandenong Advertiser. 'Bob' Swords was also a member of the Dandenong Advertiser newspaper and was a driving force in Dandenong getting it's own Hospital. For many years his photo hung over the entrance to the old building, which was demolished some years back. Regrettably this photo was lost. Bob enlisted into the Royal Australian Air Force to train as a pilot on 26 April 1941 and after initial training embarked to Southern Rhodesia. After completion of initial flight training he then moved to England for advanced training, prior to postings onto an OTU. He was tragically killed during this phase of training on 21 January 1943. The gentleman with in this photo is believed to be his South African Flying Instructor 'Panda' Watkins. His grave in England has a lovely headstone and the inscription: 'Service Above Self'. (As advised by Robert Richard Kudyba OAM).Brass plaque stating 4085537 Sgt R.R.F. Swords 23 Sept 1912 - 21 Jan 1943.

Straight razor in case. (00955/1). Blade of razor made by Cadman & Sons, Sheffield. Blade folds away into plastic handle. Case carries Crown & Sword branding [note: this is a different company altogeher] (00955/2).[on case] Crown & Sword Razor / Guaranteed [on blade] Made in England expressly foir G Peart / Tobacconist / Mildura [on blade handle] Cadman & Sons, Sheffield, England / logo BENGALL. crown & sword - g peart, mildura, cadman & sons, sheffield

Vehicle identification plate used by Australian Army HQ post WWIIAuatralian Army vehicle identification plate used post WWIISmall square shaped painted steel vehicicle identification plate. Painted khaki on the rear and front edges. Red, blue and red horizontal painted stripes on front face decal. Crossed swords, khaki painted kangaroo and Queens crown painted on front face decal.Red, blue and red horizontal painted stripes on front face. Crossed swords, khaki painted kangaroo and Queens crown painted on front face decal.vehicle, identification, plate, australian army, army headquarters

The medal was designed by Andor Meszaros and made by K. G. Luke(Medal Makers) of Melbourne, Victoria. This medal was presented to the Shire of Ballarat in 1951 and is now house in the Old Ballarat SHire Building at Learmonth, Victoria.This medal represents the 100 years of "Government in Victoria", also the "Discovery of Gold".A large round bronze medal with a horse bounding left, broken shackles on foreleg, carrying woman holding sword (Justice) and man holding torch (Equality).The front features a man holding a torch and a woman on a horse holding a sword. The horse has a shackle on its front left leg, surrounded by the words "EQUALITY AND JUSTICE THROUGH FREEDOM". On the back at the bottom is flowers and leaves with the words "CENTENARY OF THE GOVERNMENT OF VICTORIA 1851 - 1951.shire ballarat government victoria gold discovery 100 years

Costume designed for the NSC Rock Eisteddfod 1994. Character was Black Knight in the production of "The Sword in the Stone", based on the legend of King Arthur. Costume worn by Year 11 student Rowan Klingberg. Rowan Klingberg went on to be a teacher of PE and Mathematics at Newcomb Secondary College.Black satin tabard sewn by machine, overlocked at edges, biased binding at neckline in black. 'Sword pocket' zigzag stitched to front of item. Side ties half way down, front and back, overlocked along all edges. White eagle logo on front.Name tag - Rowannewcomb secondary college, costume, knight costume, rock eisteddfod

WW1 era shaving cut-throat razorWW1 eraFolding cut-throat steel razor and cardboard protective case (case missing the top section). The blade folds into a dark brown coloured two sided bakelite plastic handle, riveted at each end. The cardboard case is dark coloured, with a light green coloured insert. The steel blade has a curved section at one end, and the shaving blade at the other.THE CROWN AND (crown and sword picture trademark) SWORD RAZOR EXTRA HOLLOW GROUND CROWN (crown and sword picture trademark) & SWORD TRADE-MARK MADE IN GERMANY ERN 1166 The Crown and Sword picture trademark is embossed on one side of the Bakelite holder.razor, cut-throat, steel, germany, crown and sword, bakelite, shaving

Set of two identical swords, rapier style sword with straight, patterned blade "Made - Spain/ Toledo"

Set of two identical swords, rapier style sword with straight, patterned blade "Made - Spain/ Toledo"

The Victorian Mounted Rifles was raised in 1885 as the mounted arm of Victoria’s colonial defence forces. Companies were recruited in rural centres across the State, members of country rifle clubs forming a significant component. They were semi-professional: only a small allowance was paid to members. Members were required to provide their own mount. Mounted riflemen were not cavalry, not being equipped with lance or sword. They were trained to fight with rifle and bayonet after dismounting. Horses enabled rapid and far reaching manoeuvrability. Upon Federation, the VMR companies became Australian Light Horse regiments.Rare photograph of mounted Victorian colonial soldier.Black and white photograph of Victorian Mounted Rifles trooper mounted on his horse. His side arm is a Yataghan sword bayonet indicating he would be armed with a Martini-Henry rifle.victorian mounted rifles, vmr, uniform, bayonet, horse, military, colonial

Japanese Samurai swordweapon, ww2, army

Used by Leonard George Pollard. He served in H.M.A.S. ANZAC in Vietnam and retired as LCDR Engineer Ceremonial Naval Officers Sword Fine etching on both sides of the bladeh.m.a.s. anzac, hmas sydney & the vietnam logistics support veterans association

Metal Sword and Leather scabard, On blade written-By Warrant-Henry Wilkinson Pall Mall London. Scabard is Leather stitched over wood with a Brass neck at the entry. A.C.Fisken. Artillary Gun.Opposite side highly patterned with the words Royal Artillery

Japanese Samurai sword and scabard.ww2, army

Japanese Officers Sword (no Tsube)weapon

Japanese Samurai Sword and Scabbardweapon, ww1

Replica of Captain Cooks Swordmiscellaneous

Souvenir sword made of coins

Pattern 1855 sword bayonetG732 on brass cross handle