Showing 56 items
matching testing machine
-
Australian Gliding Museum
Machine - Glider, 1974
The “Northrop” is an American copy of the “Zogling” which was designed in Germany in the 1920s as a training glider. Apparently, the Northrop primary glider takes its name from a Marvin Northrop of Minneapolis who imported a Zogling from Germany and from that glider had plans drawn and published in a magazine called Modern Mechanics in 1930. The Australia Gliding Museum’s Northrop was built over the period of 1970 to 1974. The project was conceived by a pioneer of Australian gliding, Ken Davies, about 1969, as a hobby project and to experience afresh gliding flight of the early years. By that time, few primary gliders, which performed a fundamental role for gliding clubs in the 1930s and 1940s, remained in Australia. Ken began construction and was helped to finish the project by two old time Gliding Club of Victoria members, Dave Darbyshire and Rudi Feil. The glider was test flown on 8 March 1975 at Benalla. The glider was stored at the Gliding Club of Victoria and flown on special occasions in the 1980s. Later it was damaged at the 1996 vintage glider rally at Ararat as a result of a heavy landing. Storage was then provided for the glider by the Victorian Motorless Flight Group at Bacchus Marsh until it was returned to Dave Darbyshire for restoration in 1998. Fully restored, the glider was donated by Iris Davies and Dave Darbyshire to the Australian Gliding Museum in April 2001. This exhibit is the type of machine that formed the basis of the sport of gliding from 1929 to about 1945. The glider consists of an open (uncovered) wooden framed fuselage (painted blue) with a brown vinyl covered seat, fabric covered wooden framed wings of constant chord (painted silver) with provision for attachment of semi-circular cane wing skids, and fabric covered wooden framed tailplane, elevators and rudder (painted silver). When assembled the airframe is wire braced.australian gliding, glider, northrop, zogling, davies, darbyshire, feil, gliding club of victoria, victorian motorless flight group -
Australian Gliding Museum
Equipment - Glider – Hang Glider Type, 2013 - 2014
Otto Lilienthal (1848-1896) from Berlin, Germany, is widely credited as being the first person to make repeated successful gliding flights. He was known for adopting a thorough scientific approach founded on observations of the flight of birds in relation to the problem of inventing a man carrying heavier than air machine that would fly. He developed and tested bird-like gliders controlled by weight shift by the pilot (a similar method to modern hang gliders). The pilot held on to the glider with his forearms resting in hoops mounted on the main structural beam connecting the wings. The weight shift was achieved by the pilot swinging his trunk and legs. In contrast, the pilot of a modern hang glider is suspended below the glider and, with the use of an A-frame, allows the whole body to be moved around to achieve control. The Lilienthal design apparently had a tendency to pitch down and a tailplane was added to mitigate this problem. Lilienthal flew from hills in the Rhinow region and from a conical hill he built near Berlin. He made over 2000 flights. Importantly, for others seeking to progress manned flight at the time and also for the historical record, reports of Lilienthal’s flights (some with photographs) were published and Lilienthal detailed his experiences and corresponded with other flight pioneers. Lilienthal’s work became well known and influenced Orville and Wilbur Wright in their initial experiments with gliders in 1899 (although in their quest to design and fly an aeroplane they relied on new data created by wind tunnel testing). The replica built by Bruce Hearn is of the 1893 Lilienthal glider. It is very similar to the “Normal-Segalapparat” (Normal Glider) for which patent protection was later granted a few years later. The Lilienthal replica glider is an important addition to the AGM collection as it represents the beginning of successful gliding flight. Hang glider made of wood with wire bracing – yet to be covered with authentic cotton fabric. The glider has a small plate with identification details including name of builder (Bruce Hearn) glider, hang glider, lilienthal, hearn, replica -
Australian Gliding Museum
Machine - Glider - Sailplane, 1937
The Golden Eagle is an original design by Geoff Richardson. Geoff commenced gliding in the early days of the sport circa 1933 in Melbourne, flying at Coode Island and Mt Frazer. In 1934, he began construction of a secondary type glider but scrapped it upon realizing that a better design was needed. He conducted further research and came up with a sailplane of similar size and general arrangement to the Grunau Baby but with a “Gull” wing using a Gottingen 535 wing section (the same as for the Grunau Baby). Geoff did all the technical calculations himself and even made up and tested a Casein glue for the construction. Geoff competed construction of his new sailplane (which he called the “Golden Eagle”) in 1937 and it was test flown at Laverton at the western edge of Melbourne in September 1937. On the same day, at Laverton, the Gliding Club of Victoria flew its new Grunau Baby 2 sailplane which it had imported as a finished machine from Edmund Schneider in Germany. The Golden Eagle was found to fly well, having a similar performance to the Grunau Baby. In the 1950s, the Golden Eagle was modified by rebuilding the front of the fuselage to enclose the cockpit with a Perspex canopy. A landing wheel was incorporated behind the skid. Spoilers were added to the wings and a trim tab to the elevators. The Golden Eagle has been flown with the VMFG (Victorian Motorless Flight Group) for most of its long life. When donated to the Australian Gliding Museum in 2016 by Alan Patching it was probably the oldest, continuously airworthy glider in the world. Having regard to the historical significance of the Golden Eagle, the Museum has decided to not to fly it anymore to avoid risk of loss or damage. The exhibit is of great significance for Australian gliding history – the Golden Eagle is a flyable 1930s aircraft in excellent condition that was designed and built by an Australian gliding pioneer. Single seat wood and fabric sailplane finished with white wings, tailplane and rudder and yellow fuselage Registration letters “FC” on fuselage nose port side, Australian flag, Vintage Gliders Australia and VMFG decals on rudder, “Golden Eagle” lettering in red on each side of the fuselage below the canopy, Aboriginal flag decal on port side of fuselage below the canopy. australian gliding, glider, sailplane, golden eagle, richardson, patching, vmfg, victorian motorless flight group -
Monbulk RSL Sub Branch
Book, Craig Deayton, The battle of Messines : 1917, 2017
On 7 June 1917, the British Second Army launched its attack on Messines Ridge, detonating 19 giant mines beneath the German front-line positions. By the end of the day, one of the strongest positions on the Western Front had fallen, a place of such importance that the Germans had pledged to hold it at any cost. It was the greatest British victory in three years of war. The first two years of the First World War had represented an almost unending catalogue of disaster for the Australians. Messines was not only their first real victory, it was also the first test in senior command for Major General John Monash who commanded the newly formed 3rd Division and would later be hailed as Australia's greatest soldier. Messines was a baptism of fire for the 3rd Division which came into the line alongside the battle-scarred 4th Australian Division, badly mauled at Bullecourt just six weeks earlier in one of the worst defeats of the war. The fighting at Messines would descend into unimaginable savagery, a lethal and sometimes hand-to-hand affair of bayonets, clubs, bombs and incessant machine-gun fire, described by one Australian as '72 hours of Hell'. After their string of bloody defeats over 1915 and 1916, Messines would be the ultimate test for the Australians. Collapse summaryIndex, bibliography, ill (col), p.172.non-fictionOn 7 June 1917, the British Second Army launched its attack on Messines Ridge, detonating 19 giant mines beneath the German front-line positions. By the end of the day, one of the strongest positions on the Western Front had fallen, a place of such importance that the Germans had pledged to hold it at any cost. It was the greatest British victory in three years of war. The first two years of the First World War had represented an almost unending catalogue of disaster for the Australians. Messines was not only their first real victory, it was also the first test in senior command for Major General John Monash who commanded the newly formed 3rd Division and would later be hailed as Australia's greatest soldier. Messines was a baptism of fire for the 3rd Division which came into the line alongside the battle-scarred 4th Australian Division, badly mauled at Bullecourt just six weeks earlier in one of the worst defeats of the war. The fighting at Messines would descend into unimaginable savagery, a lethal and sometimes hand-to-hand affair of bayonets, clubs, bombs and incessant machine-gun fire, described by one Australian as '72 hours of Hell'. After their string of bloody defeats over 1915 and 1916, Messines would be the ultimate test for the Australians. Collapse summary world war 1914-1918- campaigns - western front, battles of messines - australian participation - 1917 -
Monbulk RSL Sub Branch
Book, John Masefield, Gallipoli, 1978
The Gallipoli campaign began one fateful Sunday morning in April 1915. It was to be Australia's test of nationhood. The Allied soldiers landed in the dark, crossing beaches tangled with barbed wire, passing mines and scaled the precipitous cliffs under machine-gun fire. An intense five-month campaign ensued, the lines so close that there was no respite from battle. With access to military documents, the poet John Masefield published this moving account of the Allied efforts in the Dardanelles less than a year after the defeat. The book was a huge success, as it gave glory to the bravery and determination of the young men who endured heat, toil, thirst, disease and pestilence but were always ready and willing to die in exultation for their cause.. Moving account of the Allied efforts in Dardanelles after the defeat.Ill, map, p.183non-fictionThe Gallipoli campaign began one fateful Sunday morning in April 1915. It was to be Australia's test of nationhood. The Allied soldiers landed in the dark, crossing beaches tangled with barbed wire, passing mines and scaled the precipitous cliffs under machine-gun fire. An intense five-month campaign ensued, the lines so close that there was no respite from battle. With access to military documents, the poet John Masefield published this moving account of the Allied efforts in the Dardanelles less than a year after the defeat. The book was a huge success, as it gave glory to the bravery and determination of the young men who endured heat, toil, thirst, disease and pestilence but were always ready and willing to die in exultation for their cause.. Moving account of the Allied efforts in Dardanelles after the defeat. world war 1914-1918 - campaigns - gallipoli, anzac corps -
NMIT (Northern Melbourne Institute of TAFE)
Photographs - Collingwood Technical School, Mounted photographs of Trade School (Electrical) CTS, circa 1940, c1940
Collingwood Technical School trained apprentices in many trades. These photographs depict apprentices operating various machines. Captions: 1. Collingwood Technical School / Electrical fitting apprentice operating a lathe [2 copies] 2. Collingwood Technical School / Electrical mechanic apprentice testing in the electrical laboratory. These are high quality professional photographs taken circa 1940. 3 black and white photographs mounted on brown card. Photographs depict various aspects of electrical fitting and mechanics work.Each photograph has a hand written caption on the front. collingwood technical school, cts, apprentices, students, lathes, electrical trade, nmit, -
National Wool Museum
Machine - Wrap Reel
Wrap reel manufactured at Valley Worsted Mill and possibly used in the laboratory. "Wrap reels were used to check the yarn count in a spinning mill. A set length of yarn was wound off several test bobbins and weighed, if the weight was not the correct amount expected the spinning machines draft could be re calculated and the machine draft wheel ( cog ) changed to achieve the required count". - Greg AldridgeA small hand operated wrap reel. The reel is on a wooden base, the winding mechanism is metal and turned by a wooden handle. There is a metal plaque on the base inscribed MAKERS VWM. A wood and metal yarn feeder has broken off its mount.MAKERS/ VWMtextile machinery textile production weaving, valley worsted mill valley worsted mill, warping machinery, textile machinery, textile production, weaving, wrap reel, skein winder -
Ballarat Heritage Services
Photograph - Image - Black and White, Macaroni Factory, Hepburn Springs, 1900, 1900
"MACARONI MANUFACTORY. On the pretty road to the Hepburn Mineral Springs, and not far from where the health-laden waters gush plentifully from the earth, is a two-storied brick it is that Messrs Lucini and Co, carry building, dedicated to the manufacture of macaroni, vermicelli, and the Italians' own especial delight— spaghetti. Here on operations, and Mr Lucini himself was good enough to show the writer around and explain the various proces ses of a manufacture which is little known to Australians. The finest wheat and the mineral waters fresh from the springs are utilised, and by means of a most ingenious machine, the hollow rods of macaroni are turned out in large numbers. Finally, they are packed in boxes and cases, and sent off to the prin cipal agent in Daylesford, Mr J. W. King, who in turn forwards them to all parts of the country. Mr Blackett, thv Govrnment Analyst, writes in most lau datory manner of the productions of the factory, and says that on testing them he found the various sam ples were of excellent quality, and quite equal to any of Italian manufacture. Visitors to the springs should not fail to call in at Messrs Lucini's, which is one of the show places of the district, and will well repay an inspection.A number of women, members of the Lucini family, make macroni and the macaroni factory in Hepburn Springs. lucini, macaroni factory, hepburn springs, spaghetti, macaroni -
Moorabbin Air Museum
Document - Test and Control Conditions for Spot Welded Aluminium and Aluminium Alloy Assemblies and Welding Machines
-
Ballarat Tramway Museum
Document - Charts, Public Transport Corporation Victoria (PTC), 671 Brake testing charts, 20/02/1996 12:00:00 AM
Demonstrates how tramcar braking performance could be measured mid 1990's.Original chart outputs of brake testing carried out by Met Tram (Mal Ashworth & Les Jeans) on tram 671 on 20/2/1996 - following installation of composite brake shoes. From a machine set up to measure de acceleration. 275.1 - Test results for 25psi and 39 psi application - driver WAD - 125H x 820 long 275.2 - test results for full service application - 125H x 600 long. Photocopy of charts made at the time. Images of charts added 22/10/2013 See Fares Please! March 1996various notes regarding pressures etc. on chart.tramways, trams, w4 class, brake charts, testing, tramcar brakes -
Moorabbin Air Museum
Book - Amplifiers, Rotating Amplifiers
... machines Operating principles, construction, testing & maintenance ...Operating principles, construction, testing & maintenance of 4 types of amplifying machines - amplidyne, metadyne, magniconl & magnavolt.Circa 1950snon-fictionOperating principles, construction, testing & maintenance of 4 types of amplifying machines - amplidyne, metadyne, magniconl & magnavolt.Circa 1950s4 types of amplifying machines -
Moorabbin Air Museum
Machine - BE2A Wings, 1912
Historical Details: The AARG B.E.2a wings are a pair of upper main planes or wing panels without ailerons, of a wing warping design, and are almost certain to be sourced from the Central Flying School at Point Cook, as no other B.E.2a aircraft were ever brought to Australia. Description: The Royal Aircraft Factory in England was formed in 1911 and among its designers was Geoffrey de Havilland who later founded his own company. The B.E.2 was designed by Geoffrey de Havilland and first flew in February 1912 with de Havilland as the test. Level of Importance: National -
Moorabbin Air Museum
Machine - Armstrong Siddeley Genet 80 HP 5 Cylinder Radial
Historical Details: . Description: The Armstrong Siddeley Genet was developed in England and was first tested in 1926. It was a popular power plant for many light aircraft of the day.. Level of Importance: State -
University of Melbourne, Burnley Campus Archives
Photograph - Black and white and colour slides, colour negative, Miscellaneous Horticulture, 1947-1985
57 slides and 1 negative. (1) "1947 Rolling the surface," in front of the newly constructed Administration Building. (2) "5-5-60 Same tree 7 months later-New Growth." (3) Men standing around a large horticultural machine. (4) "Lawns Housing Com" Aug "66?" (5) "Flemington Racecourse." (6) "Mustard-Cover Crop. 1960." (7) Tree climbing. (8) "Grafting-scions. BHC." (11) "Mildura-Soil Probe Oct 67." (12) Virus tested stock trees & layout Flemings Apr 70." (13) "Best's Winery Mar 75." (15, 16) Best's single student and group. (17) "Ploughing-Diagram to show incomplete cover of trash? Farm Practices." (18) "Spraying Hand Equipment for Insect Control in and around Buildings USA Yearbook 1952." (19) "Pasture Harrows." (20) "Mould Board Plough-Tractor." (21) "Disc Harrows-Offset-Tractor." (22) Tyne Cultivator-for Tractor." (23) See B91.258." (24) Burnley College libary. (25) "Irrigation-Delver Tatura 12/59." (26) "Tatura 12/59 Delver Ferguson T." (27) "Wilson's Prom? date." (28) "Wilson's Promontary Nov 1960 lunch." (29) "W. Prom." (30) Camp 1957 Wilson's Promontary." (31)" Longeronong Field Day 1964 Machinery Combination (Small)." (32, 33) "Longeronong Field Day 1964 Machinery Cultivating." (34-36) Photographs of plants in book. (35) Alnus? (37) "Meterosideros excelsa." (38) "Rhipsalidopsis rosea." (39) "Protea neriifolia." (40) Banksias-Species." Insects: (41) "Lacewing larva." (42) "Mites Aug 75." (43) "Yellow Mite, Red Spider (Arachnida)." (44) "Jassid-Life Cycle 9/51." (45) "Grape Fruit Crop (Florida) Destroyed by Fruit Fly. Animals without backbones." (46) "Jassid-Vegetable 9/51." (47) "Field Day 57 (Fruit Fly-Enlarged)." (48) "Field Day 57 (Fruit Fly-Stages)." (49) Insect Life Cycle. (50) "Comatibility (sic) Chart." for Insecticides & Fungicides. (51) "Insecticides-Toxicity." (52) "Life Cycle of the Leather Jacket." (53) "Grasshopper-Head Dissected Mouth Parts." (54) "Types of Antennae." (55) "Spider Mites USA Yearbook 1952." (56) "Cultivator." (57) "Organic Phosphates." (58) Negative Isopogon anemonifolius.administration building, lawns, flemington racecourse, mustard-cover crop, tree climbing, grafting, mildura, soil probe, pests, machinery, excursions, tatura, library, wilsons promontory, plants, alnus, zygocactus, schlumbergia, feijoa, acca sellowiana, protea neriifolia, banksia, isopogon anemonifolius -
University of Melbourne, Burnley Campus Archives
Album - 35mm Colour slides, Miscellaneous, 1967
1. "Drive (After) from P.R.I" Feb 67. 2-5. Students learning how to use a machine in the Orchard, 6, 7.Former Nursery, 8. Garden view. Mar 67. 9-14. Emily Gibson beds. Jun 67. 15, 19,26, 27. Plant Research Institute. "June.5.1967" 16, 17. Pruning Day 1`967. 18.Unidentified development on Campus Jul 67. 20. "Nangiloc - Fixed Sprinkler Rock Melons" Oct 67. 22. Yarra River.24. Former Rose garden (now Herbaceous Border.) 28-35 Wilson's Promontory.students, machine, garden views, campus, entrance, plant research institute, old rose garden, nursery, nangiloc, fixed sprinkler, rock melons, wilson's promontory, seed testing station, pruning day, emily gibson beds -
Mrs Aeneas Gunn Memorial Library
Book, John Masefield, Gallipoli, 1916
The Gallipoli campaign began one fateful Sunday morning in April 1915. It was to be Australia's test of nationhood. The Allied soldiers landed in the dark, crossing beaches tangled with barbed wire, passing mines and scaled the precipitous cliffs under machine-gun fire. An intense five-month campaign ensued, the lines so close that there was no respite from battle. With access to military documents, the poet John Masefield published this moving account of the Allied efforts in the Dardanelles less than a year after the defeat. The book was a huge success, as it gave glory to the bravery and determination of the young men who endured heat, toil, thirst, disease and pestilence but were always ready and willing to die in exultation for their cause.. Moving account of the Allied efforts in Dardanelles after the defeat.Ill, maps, p.183.non-fictionThe Gallipoli campaign began one fateful Sunday morning in April 1915. It was to be Australia's test of nationhood. The Allied soldiers landed in the dark, crossing beaches tangled with barbed wire, passing mines and scaled the precipitous cliffs under machine-gun fire. An intense five-month campaign ensued, the lines so close that there was no respite from battle. With access to military documents, the poet John Masefield published this moving account of the Allied efforts in the Dardanelles less than a year after the defeat. The book was a huge success, as it gave glory to the bravery and determination of the young men who endured heat, toil, thirst, disease and pestilence but were always ready and willing to die in exultation for their cause.. Moving account of the Allied efforts in Dardanelles after the defeat. world war 1914-1918 -campaigns - gallipoli, world war - campaigns - dardenalles. -
Tarnagulla History Archive
Photograph - Photograph: Company's Dam and Flour Mill, Tarnagulla, c. 1880 - 1920
Williams Family Collection. On the 20th December 1873 it was reported in the Tarnagulla Courier that arrangements were being made for the erection of a steam flour mill at Tarnagulla. Mr Bristol had purchased the necessary plant which would be erected with as little delay as possible. The site chosen was the premises occupied previously by Mr John Pierce, grocer and wine and spirit merchant, at the corner of King and Commercial Road. These premises were incorporated in the mill building. Suitable buildings for receiving and storing grain and flour had been erected already. On 10th January, 1874 an advertisement in the Courier called for tenders from masons, bricklayers and carpenters for the erection of a flour mill at Tarnagulla for H. C. Bristol, Esq. with all enquiries to be made from G. Minto, Engineer. In December 1881 the proprietors made a request to the Tarnagulla Borough Council for permission to lay pipes to the Municipal Dam, which was generally known as the Company's Dam, and to obtain water from the dam for milling purposes. This was granted. Steam was got up for the first time on 30th of March, 1882. A large quantity of wheat was stored ready for milling. Just prior to 29th of April 1882 the boiler at the mill burst, as the result of which two men, J. H. Smith and W. Hargreaves died and H. Joyce Bousfield, senior and junior, were seriously injured. The mill commenced operations on 13th June, 1882 with Mr W Fitzgerald as manager. The price offered for wheat was thirty-seven pence per bushell. It operated with grinding stones until considerable renovations were done in the early part of 1899 when new rollers and more up to date equipment installed. The mill was then known as the Tarnagulla Flour Mill Co., with Thos. Comrie as proprietor, Mr Fitzgerald was still manager, and Mr T. Leonard was the traveller. Much new equipment was put in and each of the three floors had different processes. The rollers were on the ground floor, the purifiers and elevators reel were on the second floor, plus the clean wheat bin directly over the Ganz rollers. On the top floor was the chop reel, bran reel, inter-elevator reels, brush machine cyclone sack hoist, dirty wheat shaker, clean wheat bin, dust rooms and also double damping rooms. A plant was also erected for the making of an improved quality of wheaten meal, for which purpose special machinery was procured and a pair of stones was left for grinding the meal. A complete plant for the crushing of oats etc was also erected. The driving power of the mill was supplied by a new engine complete with 16 inch cylinder, manufactured and erected by Bousfield & Co. of Eaglehawk. It was fitted with Pickering governors, connected with the cylinder was a super heater. The boiler was tested and all connections etc. overhauled, with much of it being completely renewed. There was a complete network of belts, spouts, elevators etc. all over the building, all conveniently placed. The plans etc for the new plant were drawn up by Mr J. Kilborn, manager of the firm of Bodington & Co., engineers and millwrights of Carlton, which supplied the whole of the machinery, excepting the engine. The work of erection was carried out by Mr Kilborn and his assistants to the entire satisfaction of Mr Comrie, who had gone to considerable expense to bring the mill to a completely up-todate machine, fitted with all of the most modern appliances available. An advertisement on May 6th, 1899 read: "Tarnagulla Flour Mill Co., Patent Roller Flour. Also their Digestive Wheaten Meal specially prepared for Porridge or Bread." In January 1901, 6000 bags of wheat were received weekly at the mill and it was a common sight to see the streets lined with wagons. In May 1902 the mill was lighted by gas and in July 1906 an application was made to the Tarnagulla Borough Council for permission to lay a tram track from the mill to the Railways Station. Council was agreeable to this provided suitable plans were submitted. In 1913, 15,000 bags of wheat were bought at three shillings and four pence per bushell. In January 1914 the mill was renovated. At this time 1500 bags of wheat were coming in daily, with 20,000 bags in storage. On 15th December, 1917 the mill was advertised for sale, to be sold on Friday, 21st December,.1917, on behalf of the Estate of the Late Thomas Comrie, who had died on 4th August, 1910. The Courier at that time recorded him as being responsible for the building of the mill and with being the sole proprietor. The mill was closed, apparently, for a short period. The Courier reported on 13th of September, 1918 that the mill had been sold to Mr O. Albert of Talbot and that it would re-open. An advertisement read: ALBERT. O. & SON, MILLERS. During 1920 the mill was closed and pulled down. It was later re-erected at Mildura where it operated for many years. (by Donald Clark)Monochrome photograph depicting view of Company's Dam and the flour mill in Tarnagulla. Handwritten on reverse: 'J. Caldwell and photographer's stamp 'C. Bock Photo Tarnagulla'.tarnagulla -
Tarnagulla History Archive
Postcard - Photographic postcard: Company's Dam and Flour Mill, Tarnagulla, c. 1880 - 1920
Williams Family Collection. On the 20th December 1873 it was reported in the Tarnagulla Courier that arrangements were being made for the erection of a steam flour mill at Tarnagulla. Mr Bristol had purchased the necessary plant which would be erected with as little delay as possible. The site chosen was the premises occupied previously by Mr John Pierce, grocer and wine and spirit merchant, at the corner of King and Commercial Road. These premises were incorporated in the mill building. Suitable buildings for receiving and storing grain and flour had been erected already. On 10th January, 1874 an advertisement in the Courier called for tenders from masons, bricklayers and carpenters for the erection of a flour mill at Tarnagulla for H. C. Bristol, Esq. with all enquiries to be made from G. Minto, Engineer. In December 1881 the proprietors made a request to the Tarnagulla Borough Council for permission to lay pipes to the Municipal Dam, which was generally known as the Company's Dam, and to obtain water from the dam for milling purposes. This was granted. Steam was got up for the first time on 30th of March, 1882. A large quantity of wheat was stored ready for milling. Just prior to 29th of April 1882 the boiler at the mill burst, as the result of which two men, J. H. Smith and W. Hargreaves died and H. Joyce Bousfield, senior and junior, were seriously injured. The mill commenced operations on 13th June, 1882 with Mr W Fitzgerald as manager. The price offered for wheat was thirty-seven pence per bushell. It operated with grinding stones until considerable renovations were done in the early part of 1899 when new rollers and more up to date equipment installed. The mill was then known as the Tarnagulla Flour Mill Co., with Thos. Comrie as proprietor, Mr Fitzgerald was still manager, and Mr T. Leonard was the traveller. Much new equipment was put in and each of the three floors had different processes. The rollers were on the ground floor, the purifiers and elevators reel were on the second floor, plus the clean wheat bin directly over the Ganz rollers. On the top floor was the chop reel, bran reel, inter-elevator reels, brush machine cyclone sack hoist, dirty wheat shaker, clean wheat bin, dust rooms and also double damping rooms. A plant was also erected for the making of an improved quality of wheaten meal, for which purpose special machinery was procured and a pair of stones was left for grinding the meal. A complete plant for the crushing of oats etc was also erected. The driving power of the mill was supplied by a new engine complete with 16 inch cylinder, manufactured and erected by Bousfield & Co. of Eaglehawk. It was fitted with Pickering governors, connected with the cylinder was a super heater. The boiler was tested and all connections etc. overhauled, with much of it being completely renewed. There was a complete network of belts, spouts, elevators etc. all over the building, all conveniently placed. The plans etc for the new plant were drawn up by Mr J. Kilborn, manager of the firm of Bodington & Co., engineers and millwrights of Carlton, which supplied the whole of the machinery, excepting the engine. The work of erection was carried out by Mr Kilborn and his assistants to the entire satisfaction of Mr Comrie, who had gone to considerable expense to bring the mill to a completely up-todate machine, fitted with all of the most modern appliances available. An advertisement on May 6th, 1899 read: "Tarnagulla Flour Mill Co., Patent Roller Flour. Also their Digestive Wheaten Meal specially prepared for Porridge or Bread." In January 1901, 6000 bags of wheat were received weekly at the mill and it was a common sight to see the streets lined with wagons. In May 1902 the mill was lighted by gas and in July 1906 an application was made to the Tarnagulla Borough Council for permission to lay a tram track from the mill to the Railways Station. Council was agreeable to this provided suitable plans were submitted. In 1913, 15,000 bags of wheat were bought at three shillings and four pence per bushell. In January 1914 the mill was renovated. At this time 1500 bags of wheat were coming in daily, with 20,000 bags in storage. On 15th December, 1917 the mill was advertised for sale, to be sold on Friday, 21st December,.1917, on behalf of the Estate of the Late Thomas Comrie, who had died on 4th August, 1910. The Courier at that time recorded him as being responsible for the building of the mill and with being the sole proprietor. The mill was closed, apparently, for a short period. The Courier reported on 13th of September, 1918 that the mill had been sold to Mr O. Albert of Talbot and that it would re-open. An advertisement read: ALBERT. O. & SON, MILLERS. During 1920 the mill was closed and pulled down. It was later re-erected at Mildura where it operated for many years. (by Donald Clark)Photographic postcard, front image depicting view of Company's Dam and the flour mill in Tarnagulla. Handwritten on reverse: 'A Merry Christmas and a Happy New Year, E. Bool' and photographer's stamp 'C. Bock Photo Tarnagulla'.tarnagulla -
Melton City Libraries
Photograph, The Cairn- Jimmy Melrose's plane crash site, 1988
Edna Barrie at the cairn, photo received from Graeme Minns in 1988. The cairn marks the site of Jimmy Melrose's plane crash in Melton South. The accident which happened on July 5th 1936. In 1934 Melrose made headlines with a series of spectacular flights. In July of that year, he set around Australia record and in that year established a new solo Australia England record when he flew to England to compete in the MacRoberston race with a De Havilland Puss Moth VH- YQO. The only Australian and the only solo pilot to complete the course within the time limit. He was seventh in finishing order and third in the handicap section making news again during the race with a dramatic landing in Darwin with empty fuel tanks. Late in 1935 Melrose imported the Phoenix for his “Adelaide to Anywhere” Charter Service. The previous year the Heston Aircraft Company had taken over the interests of the well known Comper Aircraft Company, and the first production of the new firm was the Phoenix, a single-engined all wooden five seater machine of sesquiplane configuration. The forward half of the fuselage was a streamlined rectangular section and the rear portion was a monocogue shell; the whole was of plywood fabric covered. The wing was built up of spruce box spars and lattice ribs, ply covered from the leading edge to the front spar and the fabric covered over the remainder. The tail surfaces were of similar construction. The most notable feature of the design was the lower stub wing which ran right across the fuselage embodying two box spars, plywood covered it housed the main undercarriage wheels when retracted and provided a substantial anchorage for the Nu form wing struts. The Dowty undercarriage retracted inwards, operated manually by hydraulic packs, Dual control fitted, with side by side seating for the pilots and three passenger seats behind. Power was a 200 h.p. De Havilland Gipsy VI 6 cylinder inverted in-line air-cooled engine. Six Phoenix were built; five of them registered in Great Britain and one of those was later sold abroad the remaining four were impressed into the R.A.F. in 1940. Specifications were: 40 feet 4 inches length 30 ft 2 ins height, 9ft 7ins, wing area 270 sq ft, Tare weight 2,600lbs loaded weight 3,300lbs; cruising speed 360 m.p.h. landing 50mph ceiling 14,000 ft range 700 miles. Melrose’s machine the first production aircraft was built early in 1936 and test flown of the 24th March. Painted green it carries the words “South Australian Centenary 1936” in silver of the fuselage and the name “Billing on the engine cowling in honor of Melrose’s uncle Noel Pemberton Billing, pioneer designer and founder of the Supermarine Aviation Company. The delivery flight was planned as a goodwill mission to publicise the forthcoming South Australian Centenary celebrations. Melrose left Dympne on the 9th April 1936, and flying via Marseilles, Naples, Athens, Baghdad, Basra, Karachi, Jodphur, Calcutta, Akyab, Penang, Singapore, Lombok, Darwin, Newcastle Waters and Alice Springs reached Adelaide on the 25th of April. Continuing the goodwill flight to other States, he visited Melbourne, Sydney, Newcastle, Grafton, Brisbane, Coff’s Harbour, Sydney again, Launceston, Hobart and Mount Gambier before returning to Adelaide on the 13th May. During June Jimmy made some charter flights and early in July was engaged by Mr. A.J. Campbell a director of several mining companies from Melbourne to Darwin to commence at Essendon on the4th July. However on that day low cloud and steady rain caused the postponement. There was little improvement and Melrose was advised to delay the departure again. However he wished to reach Oodnadatta that night, and when he observed the break in the clouds decided to leave. He planned to climb above the cloud and fly to Adelaide at 3,000 feet. The aircraft was airborne about 8.10 a.m. and was last seen from Essendon climbing above the clouds. At 8.45 people at Melton (30 miles West of Melbourne) heard an approaching aircraft. The engine noise increased abnormally and eye witnesses saw the machine fall out of control from the cloud base about 800 feet and then disintegrate, fragments were scattered for 1½ miles and both occupants were killed. Hand written carbon copy by Edna Barrie.Typed by Wendy Barrie March 2014 Last Flight of Jimmy Melrose by John Burke Parade Magazine July 1972 Page 2 –4 This article gives the take off time of 7.50 am from Essendon Airport Eyewitness account at the time Maisie Arthur’s description. Newspaper article. Edna Barrie at the site of the 'Cairn'local identities, local significant events -
Falls Creek Historical Society
Equipment - Blasting Equipment
In the early 1970s the rope tows at Falls Creek were replaced by T Bars, after which they were replaced by chairlifts. When the snow thawed, the mountains reverberated from the sounds of blasting as new pylons were constructed for these chairlifts.Blasting equipment from the early 1970s in three parts, including a rectangle metal box with black with white text on top and six connectors, a rectangle yellow 'Blostometer 80' and a rectangle box with red knobs at end and enclosed in a black-brown leather case. 'EXPLODER TESTING RHEOSTAT' 'Blastometer 80' 'Nissan Blasting Machine - ICI - 30 shot condenser'falls creek, construction, blasting, explosives, snow, snow fields -
Moorabbin Air Museum
Manual (Item) - (SP) AAP 7637.014-2M A.T.E Machine Test Facility 185-SU-3
... (SP) AAP 7637.014-2M A.T.E Machine Test Facility 185-SU-3...Manual (SP) AAP 7637.014-2M A.T.E Machine Test Facility 185 ... -
Melbourne Tram Museum
Newsletter, Public Transport Corporation (PTC), "Automated Ticketing", 1993 to 1994
Set of three documents or newsletters involved with the introduction of the Metcard or Automated Ticketing into Melbourne during the mid 1990's. .1 - "AT update" - with the Metcard logo - Issue 1 - A4 light card - testing by OneLink on the trams using Z1 No. 10, manufacturing in Australia of the tickets by Moore Business systems, Customer Assistance centres, retail agents and training of staff. .2 - "News for tram staff" - two issues signed by Russell Nathan, providing information about the implementation on the system onto trams, training, suppliers, CSEs, installation timing and training. .3 - Folder titled "Automated Ticketing" contain four information sheets about the implementation of the system: a - Consultation and Operation b - What's it all about and why will it be good for Melbourne? c - How long will it take - two phases detailed. d - General - will services be slower, fare evasion, purchasing of tickets, disability, staffing, retail agents, information, costs, when, machines and systems.trams, tramways, metcard, tickets, ticket machines -
Melbourne Tram Museum
Pamphlet, Myki, "My access - out on the road with Myki", 2007 to 2010
Yields information about the introduction of the Myki Ticketting system.Printed A4 pamphlet printed double side on A4 gloss paper titled "My access - out on the road with Myki" providing information on the planned roll out of the Myki ticket system, dates, advertising campaigns, inviting staff to visit the discovery centre, types of ticketing machines and scanners, gates etc. Notes the forthcoming trial in Geelong. Dated 2007 - actual rollout was delayed due to technical issues. .1 - issue 3 March 2007 .2 - issue 9 July 2008 - Regional bus test shows signs of success - reporting on the Geelong trial. .3 - Myki free Travel Passes - advising all Yarra Tram employees and those entitled to the free travel passes - issued 21 July 2010. 4 - issue 5 - July 2007 - bus expo, equipment installation 5 - issue 6 - Oct 2007 - TV adverts, installation, website, 6 - issue 7 - Dec. 2007 - General update, staff training, myki Ambassador and Student concession form. 7 - issue 15 - April 2010 - appointment of CEO, Bernie Carolan, myki on tour.trams, tramways, tickets, myki, employees, geelong, passes -
Alfred Hospital Nurses League - Nursing Archive
Equipment - Portable electric suction machine, Clements Suction and Pressure Pump
This equipment was located in the outpatients department (Philip Block) until September 2021 when it was deemed obsolete by Infection Prevention. Hubert Ingham Clements (1886-1969) was an Australian engineer who established his own engineering business in NSW in 1908 manufacturing combustion engines. He became interested in anaesthesia equipment and from the 1920s Clements worked on improving ether apparatus and manufacturing portable suction machines for use in hospital operating theatres. The latter machines were to earn an unrivalled reputation for reliability; many remained in service over thirty years after their date of production. The business became H. I. Clements & Son when his son William joined the company. (https://adb.anu.edu.au/biography/clements-hubert-ingham-12846)Item is an example of equipment from its time period and is of historic significance.Portable Clements Suction & Pressure Pump built by H I Clements & Son Ltd Consists of motor with attached carry handle, attached pressure regulator, attached disposable drainage cannister with tubing and power cable mounted on a trolley with castors.H I Clements & Son Pty. Ltd. Metal Manufacturing label with: Serial Number 1725FS and SAA Certificate Number BCG/4S/60194 on motor (front side) Ward 11 engraved on motor handle AH Biomedical Engineering orange test due sticker and AH Biomedical blue test sticker (reverse side)suction, clements, portable suction, respiratory, pressure pump, surgical drainage -
Forests Commission Retired Personnel Association (FCRPA)
Delayed Action Incendiary Device (DAID), Bryant and May - Richmond, Large double ended match
The Forests Commission developed the use of helicopters for aerial ignition from the mid 1960s. Bryant and May at Richmond worked with the Commission to develop a Delayed Action Incendiary Device. DAIDs as the were known, had an overall length of 180 mm, striker end length - 10 mm. Ignition end length - 80 mm, then a layer of high melting point wax (to prevent accidental ignition when rubbing together in transit). Both ends coated with a modified match head compound with safety fuse exposed length between coated match ends. There was a 17-second delay from when the small end was struck to an intense flaming of the large end, which lasted for 40 seconds. DAIDs were dangerous so were stored in a metal box outside the helicopter along with a disposable striker patch attached with a quick release pin to a special half-door. The first test was with a Bell 47G on 4 October 1967 and the first use, anywhere in the world, of DAIDs to backburn a large bushfire was undertaken in north eastern Victoria in February 1968. There was a crash of an FCV helicopter conducting aerial ignition near Wandiligong on 19 April 1978 with the tragic death of two forest officers and their pilot. The crash led to the immediate end of the use of DAIDs and the adoption of the safer Premo ping-pong ball incendiary machine which originally came from Canada but was modified at the Altona workshops. Overall, the development of aerial ignition techniques by the Forests Commission from the mid-1960s resulted in a steady climb in the area burnt each year…. peaking at 477,000 ha in 1980-81 and with an impressive 10-year rolling average of 220,000 ha around the time of 1983 Ash Wednesday Bushfires.Developed in Victoria for aerial ignitionLarge double ended match used for aerial ignition and back burning by dropping from a helicopterbushfire, forests commission victoria (fcv) -
Warrnambool and District Historical Society Inc.
Leisure object - Pouch, Leather packets & Cello string, Early 20th century
These cello strings belonged to Edith Jacobs (nee Larwill) who was prominent in music circles in Queensland before her marriage to Henry Jacobs, a Warrnanbool Estate Agent and Auctioneer during the 1940s and 50s. Edith Jacobs featured in many concerts and musical entertainments in Warrnambool during the middle years of the 20th century. Her son, Frank Jacobs was a prominent businessman in Warrnambool in the 70s, 80s and 90s and the wallet was either made by him or for him. These items are of some significance as they belonged to Edith Jacobs, a musician who was prominent in the Warrnambool musical scene in Warrnambool in the 1940s and 50s.This is a light brown leather wallet, hand made with two fringed areas, one on the top covering. There is some machine stitching and some hand stitching (repairs)The wallet is lined with cream-coloured silk and the back of the wallet has an etching of an emu. The opening has two press studs for closing the cover. There are also three paper packets containing cello strings. Two of the strings are loose in the packets. Label stitched on – ‘Frank H. Jacobs’ Etching of emu Strings – ‘Calizi Tru-tested Strings, Cello, G or 3rd, Wound on selected gut, Made in England, J. E D. & S Ltd.’ ‘Conservatoire, Cello, A gut, Reliable and Durable, No. 1620, J.E.D.& S. Ltd’ edith jacobs (larwill), cello, cello strings, warrnambool