TIcket printed in black ink on white cardwormald, valve, apprentice, trades

An important part of apprenticeship training involved building detailed models using required techniques. This model was constructed by a Ballarat School of Mines student enrolled in the Plumbing course. This model of a roof and chimney was made by a plumbing student in the early days of the School of Mines Ballarat. The School of Mines was a trade and mining school located in the historic gold rush town of Ballarat. The model is made from 3 Ply timber. The students were often required to build these models to demonstrate their level of knowledge of what they had been taught at trade school. Although they were often made there are not many of these models intact and in this condition. The oldest Technical School in Australia and is celebrating 150 years in 2020Cut away section model made of 3-ply and timber. The roof is blue and the chimney is brown. trades, apprentice, ballarat school of mines, plumbing, model

Black and white photograph of Ballarat School of Mines Metal Fabrication teacher Robert (Rocky) Hazlett with workskills students.trades, ballarat school of mines, students, workskills, metal fabrication, apprentices, robert hazlett, rocky hazlett

Mr. George Thomas' connection with Collingwood Technical School began as a junior technical student at Collingwood in 1913. He then became an apprentice in the electrical trades during which time he also undertook a Diploma course in Electrical Engineering. Mr Thomas was appointed as a teacher (part-time) of Electrical Wiring at Collingwood in 1922 having had previous experience teaching in Geelong at the Gordon Institute of Technology. In 1930 Mr Thomas became a full-time teacher in Electrical Trades, the year of the commencement of the Apprenticeship Commission in Victoria. In 1937 he was instrumental in introducing electroplating as a trade whereas it had previously only been taught as a section of the Electrical Trades. This was a period of severe economic constraints following the Great Depression and spending on education was limited. Needing the latest knowledge of industrial practices, Mr Thomas canvassed electroplating industries around Melbourne seeking employment opportunities and met with favourable responses. He approached Quinton’s electroplating firm in North Melbourne with the proposal to work for them on Saturday mornings without payment. In return for his labour, he asked to be taught the basics of the trade. During the week he was able to impart his knowledge to his students. Initially, he wanted to develop electroplating as an outlet for the Youth Employment Training Scheme. Once the class was firmly established, he submitted a proposal to the Education Department to establish an Electroplating Department, and this became the first of its kind in the southern hemisphere. He gave up teaching in 1939 to become the Northcote City Electrical Engineer where he served for 26 years. During this time he was also a Consulting Electrical Engineer to Box Hill and Port Melbourne Councils. His association with Collingwood Technical School (and later, College) continued, first as an examiner on the State Electricity Commission (SEC) panel and from 1947 as a member of the School Council. He was president of the Council in 1961 and 1962. He also represented the College on the Northern Regional Council and participated in the selection of Electrical Trades teachers. For four years, 1967-1971, he represented the metropolitan Technical Schools and Colleges on the Council of the Monash University, in which capacity he gave outstanding service to technical education. George H. Thomas attended his first Council meeting on June 12, 1947 and remained on the Council until the secondary and post-secondary sections were separated in 1981 – a period in excess of 34 years. (See Scott p36).Black and white photographs of Mr. George Thomas who had a long association with Collingwood Technical School and Collingwood Technical College, spanning the years 1937-1972. He began his connection with the school as a teacher and went on to become a member of the School Council. He introduced Electroplating as a trade to be taught at Collingwood Technical School in 1937. (Scott p36) The photographs include one of Mr. George Thomas in Monash University regalia 1971. Another of Collingwood Technical School Council 1972 with Mr. Thomas. Images also include an excerpt from Mr. Scott's history.collingwood technical school, george h. thomas, electroplating course, nmit

Collingwood Technical School trained apprentices in many trades. These photographs depict some of the machines and machine parts built in class. Captions : 1. Marking off and checking castings 2. Examples of other machine parts, etc., being made in Youth Employment classes in engineering machine shop. 3. Cutting the traversing screw for a 5 ¼ inch lathe. 4. Grinding lathe spindle. 5. Cutting helical flutes in a shell end mill. 6. Arbor Press. Another valuable machine produced by Youth Employment and senior technical evening students. 7. Milling angular slides of lathe saddle. 8. 5 ¼ inch lathe product of Collingwood Technical School. These are high quality professional photographs taken circa 1940. 8 black and white photographs mounted on brown card. Photographs depict various aspects of lathe work.Each photograph has a hand written caption on the front. Also handwritten in black pen "Allan Studios".collingwood technical school, cts, apprentices, students, lathes, machinery, machine parts, nmit,

Collingwood Technical School trained apprentices in many trades. This photograph depicts a trainee engaged in cutting the screw thread on saddle traversing screw of 5 inch centre lathe.This is a high quality professional photograph taken circa 1940. In 1938-1940, CTS was part of the Unemployed Youth Training scheme. This photograph is a visual record of this scheme.Black and white photograph mounted on brown card. Caption pasted on back of photograph.Caption: Collingwood Technical School. / Unemployed Youth Training Scheme 1938-1940. / Trainee engaged in cutting the screw thread / on saddle traversing screw of 5 inch centre lathe. collingwood technical school, cts, unemplyed youth training scheme, apprentices, students, lathes, nmit,

Collingwood Technical School trained apprentices in many trades. In the late 1930s, CTS was involved in ttraining schemes for youth and adults.This photograph depicts two men learning to operate a lathe. This is a high quality professional photograph taken circa 1940. In 1938-1940, CTS was part of the Unemployed Adult Training scheme. This photograph is a visual record of this scheme.1 black and white photograph mounted on brown card. Photograph depicts trainees working with a 5" centre lathe.Photograph has a hand written caption on the back: 'Collingwood Technical School./ Unemployed Adults Training Scheme, 1938-1940./ Trainees planing the cast iron bed of a/ 5" centre lathe. 'collingwood technical school, cts, apprentices, students, unemplyed adult training scheme, lathes, machinery, machine parts, nmit

Collingwood Technical School trained apprentices in many trades. CTS was also invlved in Training Schemes during the late 1930s and during World War II. These photographs depict some of the machines and machine parts built in class. These are high quality professional photographs taken circa 1940-1943. At this time , CTS was part of the Defence Training scheme. These photographs are a visual record of this scheme.6 black and white photographs mounted on brown card. Photographs depict various aspects of lathe work undertaken during the Defence Training Scheme, 1940-43. Also a smaller photograph of a Moultar Thread Milling Machine 1941.Each photograph has a hand written caption on the back. Captions: 1. Finished surface plates for R.A.A.F. / standing on trestle after scraping. Stack of / others in background waiting for scraping. 2. Lathe bodies in foreground, with machined / parts of lathes in middle distance, and milling / cutters, gauges and bearings in background. 3. Frames of glass splitting machines, thread / rectifying machines, and two types of milling / machine vises made in technical schools. 4.View of engineering machine shop. Carbon dioxide / freezing box in foreground, and stack of / surface plates for RAAF in middle / distance. 5.Fan geared lathes, 6 inch centres, with / self-contained motor drives, made for / cartridge factory. To be used for making / this 6.Freezing of cast iron surface plates / in layers of solid carbon dioxide / blocks. Smaller photograph has a handwritten note on the reverse: 'this photograph shows how, with the aid of a 3ft. extension mounted in front of the tool box, on which Mr. Grubb sen. is seated, these large milling machine bases ... machinists at Collingwood Technical School. A Strang, Principal 21.4.1941'. collingwood technical school, cts, apprentices, students, defence training scheme, lathes, machinery, machine parts, nmit,

Photograph of Apprenticeship Week at Alfred Hallballarat school of mines, trades, apprentice

BHS CollectionBendigo Advertiser ''The way we were'' from Monday, February 9, 2004. Teaching the trades: this photograph, taken in 1956, depicts young men of Bendigo who were apprentices to the Ordnance factory Bendigo, now called Australian Defence Industries. Back row; Clem Williams, John Bettinelli, Peter Amstrong, Ron Rosewall, Michael Jenks, Fred Swift, Ray McHugh, Brian Ebsary, Peter Waddington, Ron Angove, Kevin Anglin, Graham Pearce, Tom Thursfield and Ian Caldwell. Second row: Noel Johns, Noel Neil, Des Bourke, Barry Shepherd,, Colin Nicoll, Stan George, Ron Nixon, Barry Collins, Graham Sargeant, Ken Craven, Norm Fieldew, Les Brown, Reg Byers and Bob Esposito. Third row: Noel Preston, Les Rodda, Kevin Angove, Keith Ivory, Geoff Jinks, Jack Gill, Allan Hill, Ian Phillips, Jack Tyack, Malcom Erwin, Mick Radford, Ron Lea and Brian Leed. Front row: Allan Gelsi, Barry Warren, Ray Dowsey, Barry Ellston, Len Dubbin, Allan Steel, Brian Runnalls, Geoff Wild, Graham Steel, Barry Thompson and Brian Frewin. The clip is in a folder.newspaper, bendigo advertiser, the way we were

Pencil on paper apprentice technical drawing of Bus bar insulator mounting technical drawing, electrical trades, k j menzies, school of mines ballarat

By the close of the 19th century, colonial children in Australia (especially poorer ones) were expected to work by age 10 or 11. Boys could become apprentices or assistants to trades such as butchers, printers, carpenters, bakers, smiths or services such as delivering newspapers. Girls could work as domestic servants, seamstresses, or in large clothing factories or weaving mills. Girls as young as 6 could work in cities selling stationary or matches to passers-by. In the 1880s workers in matchstick factories, predominantly women and young girls (4-16 years old) from working-class families could work up to 14 hours a day and were exposed to deadly phosphorous vapours on a daily basis. This led to the devastating disease known as “phossy jaw” or “phosphorous necrosis of the jaw” which caused the jawbone to rot. This small rectangular tin matchbox with raised writing on top would once have been gold and brightly coloured. It has a metal striker on the inside as this type of match contains phosphorous which is volatile and can be lit by friction. Duncan's Waterproof Wax vestas

Black and white photograph of Andrew Wheeler apprentice with Whiter Street Glass and Glazing, awarded best in entire Housing Industrial TAFE course Lakes Entrance Victoria. Also photo of Glass and Glazing Shop in Whiters Street.businesses, people, trades

Black and white photograph taken at Nowa Nowa Garage showing apprentice Allan Duncan and subcontract mechanic working on a vehicle, Nowa Nowa Victoriabusinesses, trades