Showing 87 items
matching wood turning
-
Hand Tool Preservation Association of Australia Inc
Chisel
... chisel, wood turning... No physical address melbourne Chisel chisel, wood turning This item ...This item is part of the Thomas Caine Tool Collection, owned by The National Trust of Australia (Victoria) and curated by the Hand Tools Preservation Association of Australia.chisel, wood turning -
Hand Tool Preservation Association of Australia Inc
Chisel
... chisel, wood turning, skew... No physical address melbourne Chisel chisel, wood turning, skew ...This item is part of the Thomas Caine Tool Collection, owned by The National Trust of Australia (Victoria) and curated by the Hand Tools Preservation Association of Australia.chisel, wood turning, skew -
Blacksmith's Cottage and Forge
Bobbins - lace making, Untitled, early 20th century
... wood turning... 1911) bobbins lace wood turning hand craft Untitled ...These bobbins were given to donor by her aunt and were part of the set on which the donor learned to make Nine Pin edging when she was 8 years old. (approx 1911) 2 wooden lacemaker bobbins, decorated on ends with coloured glass beads attached with wire. Bobbin one has 4 red beads, 4 clear beads, 2 black beads and 1 white bead with green and red colour band. Bobbin two has 2 brown beads, 2 blue beads, 1 black bead and 1 clear bead. Bobbins have shaped and turned shafts. bobbins lace, wood turning, hand craft -
Tatura Irrigation & Wartime Camps Museum
Egg Cup, 1940's
... woodwork wood turning ...Handmade by internee at camp 3, Tatura and used there as an egg cup. Handturned light coloured, polished wood egg cupegg cup, bissinger g, camp 3, tatura, ww2, handcrafts, woodwork, wood, turning -
Whitehorse Historical Society Inc.
Article, Christmas Cheer, 1992
... Wood Turning.... With photo. Toys Forest Hill Woodturners Anderson Ted Wood Turning ...Forest Hill Woodturners present Christmas toys to community organisations. With photo.toys, forest hill woodturners, anderson, ted, wood turning -
Whitehorse Historical Society Inc.
Photograph, Open Day 1997, 1/04/1997
... Wood Turning... gardiner bob Wood Turning ...Coloured photo of Wood Turners' Display on Heritage Week Open Day 1997.nunawading and district historical society, heritage week 1997, gardiner, bob, wood turning -
Clunes Museum
Ceremonial object - GAVEL & BASE, 1990's
... Wood turning...Gavel Wood turning Nil .1 Wooden hammer (gavel), wood ....1 Wooden hammer (gavel), wood turned, shaped handle and head .2 Wooden base, round, felt on bottom, rings in wood on sideNilgavel, wood turning -
Hand Tool Preservation Association of Australia Inc
Chisel
... chisel, wood turning, gouge, 1"... No physical address melbourne Chisel chisel, wood turning, gouge, 1 ...This item is part of the Thomas Caine Tool Collection, owned by The National Trust of Australia (Victoria) and curated by the Hand Tools Preservation Association of Australia.chisel, wood turning, gouge, 1" -
Flagstaff Hill Maritime Museum and Village
Decorative object - Container, Unknown
... evidence of wood turning inside. ... container, round shape, with lid. Container shows evidence of wood ...The container could be amongst personal effects as luggage or in a home, used for storing small items.It is currently not associated with a historical event, person or place at this time and is being used to augment Flagstaff's village display.Wooden container, round shape, with lid. Container shows evidence of wood turning inside. Decorative painted flower design flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, container, jar with lid, wooden jar, personal effects -
Tatura Irrigation & Wartime Camps Museum
Rings - Wooden, 1940's
... ) or wood turning bench.... made on small lathe (no. 2955) or wood turning bench. Sent from ...Sent from Germany by Elfriede & Paul Faig.2 light coloured wooden rings made on small lathe (no. 2955) or wood turning bench.tatura, camp 3, lathe, faig, p, kaltenbach, handcrafts, woodwork -
Tatura Irrigation & Wartime Camps Museum
Cups - Wooden, 1940's
... ) or wood turning bench.... on the small lathe (no. 2955) or wood turning bench. Sent from Germany ...Sent from Germany by Elfriede & Paul Faig.2 solid dark wood cups made on the small lathe (no. 2955) or wood turning bench.tatura, camp 3, lathe, faig, p, kaltenbach, g, hermann, w, handcrafts, woodwork -
Churchill Island Heritage Farm
Photograph - Photograph of woodturning
... Colour photograph of two men turning a roundel of wood...4uob [written in pen, on reverse, on left] MCHIS/WOOD... 4uob [written in pen, on reverse, on left] MCHIS/WOOD TURNING ...Churchill Island Heritage Farm has a large photographic collection dating from the nineteenth century to the modern day.Colour photograph of two men turning a roundel of wood on a green machine, with a FOCIS sign in the background4uob [written in pen, on reverse, on left] MCHIS/WOOD TURNING [written in pen on reverse in centre] 125% [written in pen, on reverse, on right] [catalogue number written on reverse in pencil]churchill island, photograph, blacksmith, salty, hank -
Whitehorse Historical Society Inc.
Photograph, Heritage Day 2004
... Activities include displays of wood turning, old fire... of wood turning, old fire fighting equipment, lace making ...Activities include displays of wood turning, old fire fighting equipment, lace making, blacksmith, spinners and weavers, bark painting, stationary enginesTen coloured photographs showing various activities at the Whitehorse Historical Society Heritage Day in 2004heritage day 2004, whitehorse historical society, festivals and celebrations -
Kiewa Valley Historical Society
Skittles wooden, Circa 1980
... and top have manufacturing markings from a wood turning machine... and top have manufacturing markings from a wood turning machine ...Indoor children's toy. Historically these gained greater popularity when professional ten pin bowling had its major impact in Australian sport and recreation. This item was gifted by one who had played skittles as a child with her brother on carpeted passage in her home. Skittles was an indoor game.This item clearly represent a period in rural Australian development when entertainment and sporting facilities were broadcast but local access to professional facilities not readily availableThis is an incomplete set of toy wooden skittles. There are three green, two yellow, one red and one brown pin. The bottom and top have manufacturing markings from a wood turning machine. Full set is nine pinschildren, wooden, toy, skittles -
Federation University Historical Collection
Booklet - Booklet - Prospectus, The Warrnambool Junior Technical School, Prospectus 1916, 1916
... institutions. There is a photograph of carpentary and wood turning... of carpentary and wood turning workshop and the sheet metal workshop ...Used by Ballarat School of Mines and Industries. The Junior Technical School was a day school combining general education with a practical preparatory training for engineering and other trades, and for art and science work.Red soft covered booklet of 20 pages containing information on aim and purpose of the school, scholarships, admission, text books etc, hours, compulsory education, accommodation and school institutions. There is a photograph of carpentary and wood turning workshop and the sheet metal workshop.warrnambool, warrnambool junior technical school, prospectus, j.murray, t. livingstone, f. tate, fritz landmann, p. webb, b. abbey, e.b. phillips, f. morse, w.j. hickford, e. battarbee, m.j. tate, charles foyle, a. robinson, john alderidge, i. macdermid, letters of support, business men -
Orbost & District Historical Society
butter churn, 1890 ?
... Wooden "Cherry" butter churn with wood and metal turning... gippsland butter churn Wooden "Cherry" butter churn with wood ...Used domestically, though any extra butter would have been sold to neighbours. Many families kept a cow or two for milk etc. Cream needed to be at least 2 days old - the thicker the better. The handle was turned until the cream turned to butter,the whey was poured off and the butter washed in cold water until the water ran clear. Generally salt and bicarbonate of soda were added. Two pats were used to form butter into 1lb lots.This was used by Mrs (1890-1980) Carl Wehner who was the son of the blacksmith Herman Wehner. Wehner's Blacksmith's was founded at Orbost in 1889.Wooden "Cherry" butter churn with wood and metal turning handle. It has a detachable wooden lid.Front - E. Cherry - improve maker patent, Gisborne stencilled 0 Bottom - stencilled 0 On top of lid handle - 49260butter-churn domestic-items food-preparation wehner-hermann -
Mont De Lancey
Knife Cleaner
... Round wooden barrel with metal and wood handle for turning... and wood handle for turning barrel, which also had brass fittings ...Round wooden barrel with metal and wood handle for turning barrel, which also had brass fittings All placed on a cast iron base."Snye & Co Manufacturing London" written on a brass plaque, on front of the barrel.knife cleaners -
Mont De Lancey
Knife Cleaner, Circa 1890
... Cast iron knife cleaner, with iron and wood handle... and wood handle for turning 2 rubber rollers, within 2 sides held ...Cast iron knife cleaner, with iron and wood handle for turning 2 rubber rollers, within 2 sides held together by metal screws. Hand cranked, twin rubber roller."Spong & Co" "UneeK"knife cleaners -
Anglesea and District Historical Society
Butter Churn, E. Cherry & Sons, Pre 1900-1930
... Butter churn, wooden, hand operated with wood and metal... operated with wood and metal turning handle. It has a detatchable ...Butter churn, wooden, hand operated with wood and metal turning handle. It has a detatchable wooden lid. Called the bentwood box churn. Outside is an x shaped wooden rack which is joined to an exterior metal hand crank through a hole in the box.Side: E. Cherry & Sons, Gisbornebubb family, evans family, butter churn, bentwood box churn -
Marysville & District Historical Society
Book, The Goldfields and Mineral Districts of Victoria, 1980
... of wood and he is turning a handle on a hand winch to bring up... of a platform made out of planks of wood and he is turning a handle ...A history of the goldfields and mineral districts of VictoriaHardcover. Front cover has an illustration of a miner standing next to a hole in the ground which is surrounded by logs. He is standing on top of a platform made out of planks of wood and he is turning a handle on a hand winch to bring up a bucket.Stamp of the Marysville & District Historical Society Inc / P.O. Box 22 / Marysville 3779gold mining, gold mine, mineral resources, victoria, australia, history, robert brough smyth -
Flagstaff Hill Maritime Museum and Village
Furniture - Screen, Thomas Hope, 1905-1913
... producing elaborate wooden frames in his wood-turning and framing... producing elaborate wooden frames in his wood-turning and framing ...The fire screen was part of the original furnishings of the Lighthouse Keeper's Quarters in Merri Street, Warrnambool. It was made by Lighthouse Keeper, Thomas Hope. Thomas served two terms as an assistant lighthouse keeper in Warrnambool. His first term was from 1905 to 1907. He later returned from 1910 to 1913, when he was appointed as Keeper five months after the untimely death of his predecessor Peter Quinn. Woodworking was one of Thomas Hope’s hobbies, and the three-panel fire screen he made as a lighthouse keeper is now in the Flagstaff collection and is displayed in the Lighthouse Keeper’s Cottage. Thomas Hope 1857 - 1928 Thomas James Hope was born in Camden, Surrey, England in 1857. His father, also called Thomas, was reputed to be a member of the Royal Family, and Thomas Hope Junior his illegitimate son. Thomas was subsequently brought up on the estate of the Earl of Hopetoun in Somerset and it was thought that Thomas was the Earl’s grandson. Against the wishes of those in charge of Thomas, he joined the navy at an early age, seeing much of the world until he settled in New Zealand at the age of twenty-four. After some years in New Zealand, he came to Australia to live. One of the jobs Thomas Hope had prior to becoming an assistant lighthouse keeper in 1896 was as a cook in the Lunatic Asylum at Sunbury, Victoria. He served as an assistant keeper at Shortlands Bluff, Gabo Island, Split Point and Warrnambool, retiring in 1918. He bought a house in Nicholson St, Warrnambool and died in March 1928. He is buried in the Warrnambool cemetery. Thomas Hope is recorded in family history as being of short stature and, not surprisingly given his alleged aristocratic connections, possessed a beautiful speaking voice. He and his wife Elizabeth nee Waters, whom he married in New Zealand, had six children (Thomas, killed in World War One), Ellen (Nell), Nora (who was married at the Warrnambool lighthouse keepers cottage), William (who died in Warrnambool), Marion and Alan. Joseph Hoover (Dec 29, 1830, to Aug 7, 1913) Joseph Hoover, the printer of the pictures on the screen, was born in Baltimore, of Swiss-German heritage. He was trained as an architectural woodturner. In 1856 Hoover moved to Philadelphia and began producing elaborate wooden frames in his wood-turning and framing business. By 1865 Hoover had started to produce popular prints for publishers and artists, which included noted Philadelphia artist James F. Queen. In the 1880s Hoover set up a complete plant specialising in chromatography, the process of producing colour prints from lithographic plates. The coloured prints he produced were affordable to business and private customers. In 1893 his son Henry L., a trained lithographer, joined the company as overseer and it was called J. Hoover & Son. It became one of the largest in America by the turn of the century. Hoover won a medal for Excellence for his Chromolithographs of James Queen’s works. In 1904 Joseph’s other son, Joseph W, joined the business as a partner and the company was called Jos. Hoover & Sons. Hoover died of a heart attack in 1913. He was survived by his wife and six children: two sons who were also his business partners, and four daughters. The firm continued in production until around 1985. Hoover’s prints included scenes, still life and landscapes of America and other locations. They were sold in America and overseas to countries including Canada, Germany, Mexico and England. The three-panelled screen in the Lighthouse Keeper’s Cottage was made by the Assistant Lighthouse Keeper, Thomas Hope during one of his two terms at the Lighthouse Keepers' Quarters. It is the only object in the collection known to be connected to Hope. The Lighthouse Keeper's Cottage is part of the Lady Bay Lighthouse Complex, which is listed on the Victorian Heritage Register for being of historical, scientific (technological) and architectural significance to the State of Victoria.Fire screen comprising three black wood framed panels hinged together. Each panel contains a glass-encased print depicting a rural landscape. Ornate stencil cut wood edging and quilt-inspired parquetry sits above each panel. The central panel is taller than those either side. Screen is lined in black-painted cardboard.Printed at the base of each of the three prints “COPYRIGHT 1896 BY J. HOOVER & SON, PHILAD’’A.”flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, firescreen, thomas hope junior, ellen (nell) hope, nora hope, william hope, marion hope, alan hope, jos. hoover & sons of philadelphia, lighthouse keeper, assistant lighthouse keeper, carved screen, merri street, lighthouse keeper's cottage, lighthouse residence, lighthouse, wood carving, lighthouse complex, lady bay lighthouse, fire screen -
Federation University Historical Collection
Booklet, The School of Mines Ballaarat: Descriptive papers relating to the institution by the special reporter of "The Ballarat Star", 1875 (exact)
... and out buildings, and the proposed building for metal and wood..., and the proposed building for metal and wood turning, brass foundry ...The booklet comprises of a series of papers published in the Ballarat Star, with some revisions. The Administrative Council hoped the publication would increase interest in Technical Education, especially the Art of Mining. He would also hope the public would recognise the Ballarat School of Mines as an institution adapted to supply technical education. The Ballarat School of Mines Council listed at the front of the book includes: Redmond Barry (President and Trustee), Judge Rogers (Vice-President), Somerville Livingstone Learmonth (Trustee), Rivett Henry Bland (Trustee), Charles Gavan Duffy, John A. MacPherson (MLA), William McLellan (MLA), Duncan Gillies (MLA), F. McCoy (University of Melbourne), John I. Bleasdale, W.H. Barnard, James M. Bickett, Henry Richards Caselli, P. Chauncy, J.M. Davey, Joseph Flude, R.F. Hudson, Robert Lewis, James Oddie, Robert M. Serjeant, J. F. Usher, John Walker, J. Williamson, Mayor of the City of Ballaarat, chairman (for the time being) of each of the seven Mining Boards of Victoria. The President of Examiners was Judge Rogers, and the Honorary Auditor was Richard Ford.Stapled, brown soft covered booklet of 48 pages. Section I outlines the establishment of the Ballarat School of Mines, the buildings and land used by the school, describes in detail the former Ballarat Circuit Court and describes the lecture rooms. Section II describes the Ballarat School of Mines Museum, including a description of exhibits. Section III describes the lecture hall, and the apartments on either side of the hall, including the office of the registrar W.H. Barnard, mathematical classroom, chemical laboratory, and metallurgical laboratory. Section IV outlines the subjects offered by the Ballarat School of Mines, including Mathematics taught by John Victor of Grenville College, who had been educated at Trinity College Dublin. Mining and Land Surveying was taught by C.W. Thomas. Mr Croll taught mechanical drawing, followed by Jonathan Robinson of the Union Foundry, and finally S. Keast. It then lists some text books used in the school. Section V mentions the School Council, lack of funds, future directions, mining laboratory. Vi- Describes the land and out buildings, and the proposed building for metal and wood turning, brass foundry, blacksmith, working engine, etc. This section describes some large donations to the school - 50 pounds from the Misses Meglin of Melbourne, 10 pounds 10 shillings to the 'Pyrites fund' by the Walhalla and Long Tunnel Companies in Gippsland. Section VII covers the teaching of chemistry by Joseph Flude. Section VIII outlines the metallurgy classes and the process of assaying. Section IX covers telegraphy taught by Mr Bechervaise Section X describes the examination process at the Ballarat School of Mines. Examiners in mathematics were G.J. Russell (Buninyong) and John Lynch (Smythesdale), mining and land surveying John Lynch and P.C. Fitzpatrick (Ballarat), Principles and Practice of Mining R.M. Serjeant (Band and Albion Consols), Mechanical Engineering John Lewis (New North Company Clunes, Mineralogy and Geology G.H. F. Ulrich, Assayign and Chemistry J. Cosmo Newberry, and Telegraphy R.L.J. Ellery (government astronomer) and Sam W. Macgowan. Underground managers and captains in quart mining was examined by Henry Rosales (Walhalla Company), and alluvial mines by Messrs Bockett, Kent, Martin and Mitchell. Engineers and Engine driving was examined by W.H. Keast,Peter Matthews, Jonathan Robinson and J.M. Troup. Section XI - Covers Annual reports of the school, and honorary correspondents of the school including: John Day (Geelong); R. Evan Day (London); W.W. Evans, M.J.C.E. of New York; J.Y. Fishburne, M.B. of Ararat; Felice Giordano, Inspector of Mines, Italy; Julius Von Haast, Ph. D.F.R.S., Government Geologist of Canterbury; James Hector, M.D., F.R.S., Government Geologist of Wellington, New Zealand, W.F. Hopkins (Grant); Charles A. La Trobe, C.E. (Engineer-in-Chief International Railway Plant, London); Archibald Liversidge, F.G.S. (Professor of Mineralogy and Reader in geology at Sydney University; J.J. Macgregor, M.D. (Creswick); J.T. McKenna (1st class of SMB underground management - Northern Territory); Henry Rosales, M.E. and M. (Walhalla); Harrie Wood (SMB founder and Under-secretary for Mines, Sydney); John Walthew (Stockport, England) .2) Signed 'E.J. Tippett', former President of the Ballarat School of Mines Council melbourne, mla, ballarat school of mines, redmond barry, j f usher, james bickett, w f hopkins, rivett henry bland, s m b, judge rogers, somerville learmonth, charles gavan duffy, gavan duffy, john macpherson, william mclellan, duncan gillies, f mccoy, university, john bleasdale, henry richards caselli, henry caselli, p chauncy, j m davey, joseph flude, r f hudson, robert lewis, james oddie, robert m serjeant, john walker, j williamson, richard ford, ballarat court house, assay, john victor, grenville college, trinity college dublin, c w thomas, jonathan robinson, union foundry, s keast, blessdale, john day, r evan day, w w evans, j y fishburne, felice giordano, julius von haast, james hector, charles a la, trobe, archibald liversidge, j j macgregor, j t mckenna, henry rosales, harrie wood, john walthew, fees, frederick mccoy, w.h. barnard -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Tools, Screwdriver large, c1900
A screwdriver is a tool, manual or powered, for turning (driving or removing) screws. A typical simple screwdriver has a handle and a shaft, and a tip that the user inserts into the screw head to turn it. The shaft is usually made of tough steel to resist bending or twisting. The tip may be hardened to resist wear, treated with a dark tip coating for improved visual contrast between tip and screw—or ridged or treated for additional 'grip'. Handle are typically wood, metal, or plastic and usually hexagonal, square, or oval in cross-section to improve grip and prevent the tool from rolling when set down. The handle and shaft of screwdrivers have changed considerably over time. The "Perfect Pattern Handle’ screwdriver was first manufactured by HD Smith & Company, which operated from 1850 to 1900. Screwdrivers were probably invented in the late 15th century, either in Germany or France when Screws were used to construct screw-cutting lathes, for securing breastplates, backplates, and helmets on medieval jousting armor—and eventually for multiple parts of the emerging firearms, particularly the matchlock. The jaws that hold the pyrites inside medieval guns were secured with screws, and the need to constantly replace the pyrites resulted in considerable refinement of the screwdriver. The screwdriver depended entirely on the screw, and it took several advances to make the screw easy enough to produce to become popular and widespread Canadian P.L. Robertson, though he was not the first person to patent the idea of socket-head screws, was the first to successfully commercialize them, starting in 1908. In Portland, Oregon, Henry F. Phillips patented his own invention, an improved version of a deep socket with a cruciform slot, today known as the Phillips Screw. Phillips offered his screw to the American Screw Company, and after a successful trial on the 1936 Cadillac, it quickly swept through the American auto industry. A main attraction for the screw was that conventional slotted screwdrivers could also be used on them, which was not possible with the Robertson Screw. A large steel screwdriver with worn wooden handlepioneers, early settlers, market gardeners, moorabbin, bentleigh, cheltenham, brighton, tools, craftsman, carpenters, , blacksmiths, builders, farmers, metalwork, woodwork, screws, philllips head screwdrivers, h.d.smith & co usa, p.l. robertson, henry f.phillips , oregon, canada, american screw company, -
Phillip Island and District Historical Society Inc.
Tool, Chicory Scoop, 19th Century
One of Phillip Islands earliest industries was chicory farming. The first kiln was constructed in 1870. The chicory scoop was used for turning the chicory over on a mesh floor above the furnace. This scoop was imported from Europe in the late 1880's.Chicory scoop with wooden handle, wooden scoop and steel joins and reinforcments.phillip island, wood, steel, tool, chicory, kiln, chicory scoop -
Flagstaff Hill Maritime Museum and Village
Domestic object - Corkscrew
The design of the corkscrew may have been derived from the gun worm, which was a device from at least the early 1630s, used by men to remove unspent charges from a musket's barrel in a similar fashion. The corkscrew is possibly an English invention, due to the tradition of beer and cider, and the 'Treatise on Cider' by John Worlidge in 1676 describes "binning of tightly corked cider bottles on their sides", although the earliest reference to a corkscrew is, "steel worm used for the drawing of Corks out of Bottles" from 1681. In 1795, the first corkscrew patent was granted to the Reverend Samuel Henshall, in England. The clergyman affixed a simple disk, now known as the Henshall Button, between the worm and the shank. The disk prevents the worm from going too deep into the cork, forces the cork to turn with the turning of the crosspiece, and thus breaks the adhesion between the cork and the neck of the bottle. The disk is designed and manufactured slightly concave on the underside, which compresses the top of the cork and helps keep it from breaking apart. In its traditional form, a corkscrew is simply a steel screw attached to a perpendicular handle, made of wood or some other material. The user grips the handle and screws the metal point into the cork, until the helix is firmly embedded, then a vertical pull on the corkscrew extracts the cork from the bottle. The handle of the corkscrew allows for a commanding grip to ease removal of the cork. https://en.wikipedia.org/wiki/CorkscrewThis object is significant as an example of an item in common use since the late 17th century.Metal corkscrew with wooden handle that is partly broken. Has metal steel spike to create a starting point for the use of the corkscrew. Very rusty. None.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, corkscrew, beverages, kitchen equipment, bottle opener -
Flagstaff Hill Maritime Museum and Village
Tool - Plane, 1819-1901
A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden objects. Traditionally, moulding planes were blocks of wear-resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other workers to pull the plane ahead of the master who guided it. Company History: The Holtzapffel dynasty of tool and lathe makers was founded in Long Acre, London by a Strasbourg-born turner, Jean-Jacques Holtzapffel, in 1794. The firm specialized in lathes for ornamental turning but also made a name for its high-quality edge and boring tools. Moving to London from Alsace in 1792, Jean-Jacques worked initially in the workshop of the scientific-instrument maker Jesse Ramsden, Anglicizing his name to John Jacob Holtzapffel. In 1794 he set up a tool-making partnership in Long Acre with Francis Rousset and they began trading under the name of John Holtzapffel. From 1804 he was in partnership with the Mannheim-born Johann Georg Deyerlein until the latter died in 1826, trading under the name Holtzapffel & Deyerlein. Holtzapffel sold his first lathe in June 1795, for £25-4s-10d, an enormous price at the time. All of Holtzapffel's lathes were numbered and by the time he died in 1835, about 1,600 had been sold. The business was located at 64 Charing Cross, London from 1819 until 1901 when the site was required "for building purposes". The firm then moved to 13 and 14 New Bond Street and was in premises in the Haymarket from 1907 to 1930. John's son, Charles Holtzapffel (1806–1847) joined the firm in 1827, at around which time the firm became known as Holtzapffel & Co. Charles continued to run the business after his father's death. He wrote a 2,750-page treatise entitled Turning and Mechanical Manipulation, published in 1843 which came to be regarded as the bible of ornamental turning. The final two volumes were completed and published after his death by his son, John Jacob Holtzapffel (1836–1897). When Charles Holtzapffel died in 1847 his wife Amelia ran the business until 1853. John Jacob II, the son of Charles and Amelia, was head of the firm from 1867 until 1896. A nephew of John Jacob II, George William Budd (1857–1924) became head of the firm in 1896. His son John George Holtzapffel Budd (1888–1968) later ran the business. By the early twentieth century, ornamental turning was going out of fashion, and the firm sold its last lathe in 1928. A vintage tool made by a well-known firm made for firms and individuals that worked in wood. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture or other items this had to be accomplished by hand using one of these types of planes. A significant item from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture was made predominately by hand and with tools that were themselves hand made shows the craftsmanship used to make such a unique item. Moulding Plane Holtzaffel 64 Charing & Owner J Heath 9/16" marked opposite endflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, plane, j heath -
Orbost & District Historical Society
Sewing machine, 1895 -1910
Donor, Connie Cruikshank was grand-daughter of Poppy Kerr whose father was the first doctor in Orbost. Machine belonged to her grandmother, Mrs Hilda Kerr(Temple).This item is significant for its use by an influential and well-known Orbost identity. It is also an example of a common domestic appliance of the late 19th-early 20th century.Hand-operated sewing machine. Black with gold designs, large metal turning wheel. All set on large polished block of wood.Wertheim Francfortsewing-machine kerr-dr temple-hilda cruikshank-connie wertheim -
The Beechworth Burke Museum
Photograph - Photographs, E. Yellard, c. 1950's
Two rectangular black and white photographs of the Beechworth Mental Hospital (Mayday Hills) administrative building showing the left and right hand sides of the exterior building with three cars parked in driveway turning circle in the foreground taken in the 1950's by E. Yellard. Mayday Hills Hospital, originally known as the Beechworth Lunatic Asylum was constructed between 1864-67 designed by The Public Works Department. The hospital is made up of a number of buildings, landscaping, ha-ha, workshops, laundry, administrative facilities and farmland, it was constructed in 'Italianate' style by a team of up to two hundred and fifty workers (Woods p. 122). The asylum was established in response to the need for the regional shire to locally care for those particularly affected by their time working the Ovens goldfield during the Indigo Shire gold rush era where poor living conditions and isolation were significantly affecting the welfare of a great many people through poverty and lack of resources. The gaol and orphan labour systems were not able to effectively support to give housing, rehabilitation and ongoing care for the mentally ill, and transporting to Melbourne by waggon was a time consuming and counter-productive solution when the metro facilities were already overcrowded. According to Woods (A Titan's Field p. 122), between 1901 and 1911 a large percentage (thirty five percent in 1901 and twenty four in 1911) of the Beechworth population were either patients or inmates of Beechworth institutions, Mayday Hills accounted for some six hundred and seventy four patients in 1901, Beechworth's Mayday Hills was chosen as the site of Victoria's newest asylum, at the time, due to the landscape and altitude. The hilltop atmosphere and the native fauna, it was argued, would assist in the cure of the patients kept at the hospital (Wood 1985, 122). The positioning of the hospital had a beneficial effect on the rural town and the large volume of people living at the hospital and contributing to this population growth is counted as reason for the survival of Beechworth as a regional township. According to the Victorian Heritage database, during the period 1921-1950 Mayday Hills underwent some modernisation by Public Works Department architect Percy Everett which included a nurses' hostel and new ward which were further developed and continued to function as a mental hospital up until 1995 when it was sold to LaTrobe university. The building and grounds are listed on the Victorian Heritage Register under criterion A, B, D, E and F.These photographs give a good indication of the ongoing use of Mayday Hills from its original establishment in the 1860's through to almost one hundred years later when these photographs were taken. The clarity of the images combined with the style and make of the cars in the foreground give a good indication of the time period and show the continued use and need for the facility over the years. Through images of building facades such as these, we might gain fuller understanding of the structural and aesthetic characteristics to be used in any future development or restorative work.2 x black and white rectangular photographs [copies] printed on Ilford photographic paper8688.1 reverse: Beechworth / Mental / Hospital / 80% 19cm / 12 cm / 80% / 728 / New / Print / BMM / 8688.1 / E. / Yellard / [Stamped : ILFORD] 8688.2 reverse: Beechworth / Mental / Hospital / E. / Yellard / BMM / 8688.1 / [Stamped : ILFORD]administrative building, black and white photographs, beechworth, mental hospital, beechworth mental hospital, mayday hills, cars, 1950, e. yellard, the public works department, public works department, hospital, mayday hills hospital, beechworth lunatic asylum, lunatic asylum, asylum, ovens goldfield, indigo shire, indigo shire gold rush -
The Beechworth Burke Museum
Audio - Oral history, Jennifer Williams, Mrs Florence Goonan, 10th August 2000
Florence Alice Gonnan was born on the 13th of June 1917 in Yackandandah, Victoria, the youngest of six children. Her father worked in the gold mines, bringing in wood. Florence recalls her Grandfather being in charge of turning on the water for the mines in Yackandandah. Florence worked as a nurse in the Yackandandah hospital, before moving to Beechworth in 1954 when her husband was employed at the Beechworth Mental Hospital. Florence had eight children. Her husband was very ill, having surgery to remove part of his stomach at the Royal Melbourne Hospital, and struggled to gain income for the family. This oral history recording was part of a project conducted by Jennifer Williams in the year 2000 to capture the everyday life and struggles in Beechworth during the twentieth century. This project involved recording seventy oral histories on cassette tapes of local Beechworth residents which were then published in a book titled: Listen to what they say: voices of twentieth century Beechworth. These cassette tapes were digitised in July 2021 with funds made available by the Friends of the Burke.Florence Alice Gonnan provides an account of life in Yackandandah from 1917 to 1954, and in Beechworth from 1954 to 2000. She provides descriptions of daily living, and how a big family with eight children survived without much income. This is a digital copy of a recording that was originally captured on a cassette tape. The cassette tape is black with a horizontal white strip and is currently stored in a clear flat plastic rectangular container. It holds up 40 minutes of recordings on each side.listen to what they say, beechworth, oral history, burke museum, gonnan, florence alice gonnan, yackandandah -
Tennis Australia
Ball cleaner, Circa 1895
Two part object (1) Metal ball cleaner. Consists of metal upper and lower circular sections, lined with strong bristle. Top has a handle for turning, and fits into a spingdle in the base. Upper section inscription states: 'PATENTAPPLIED FOR'. (2) Small piece detached from part 1. Materials: Wood, Natural fibre, Metal, Paint, Rubbertennis