Application by Mr and Mrs R O Goldsmith of Elwood for the position of Manager of the Legacy Club Hostel. It lists his war service with 1st A.I.F. 24th Battalion. And later work as an architect and instructor of wood work. Mrs J Goldsmith was a trained nurse and served with Queen Alexandra's Military Nursing Service in WWI. The note in red ink shows the application was unsuitable, with no reason noted.A record of written correspondence regarding job applications for roles at Holmbush in 1943.White notepaper, lined, black ink handwriting, two hole punched."Seen by Doug Unsuitable" in red ink and underlined.holmbush, residences, staff

Colour slide of a toy display. The toys were part of an arrangement with the Department of Education. Schools would produce the toys, often in wood work classes and they were donated to Legacy and Carry On. The toys were given to Junior Legatees at the Government House Christmas Party. Excess toys were passed to a dozen additional charities. The scheme started in 1949 and by 1962 over 8,200 toys were donated, from 201 schools. The total to that date was over 72,500 toys. It appears to be 1963 as there was space for the tally to be completed. Was with many other slides taken in the 1950s and 1960s. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image is the best available.A record of toys donated to Legacy in the 1960s.Colour slide of a display of toys, in a white plastic mount and grey mount on the reverse.The board in the photo says 'Creative toys serve as a wholesome outlet for the many fantasies that come into the young child's mind.'toys, department of education, toy appeal

Colour slide of toys being packed into tea chests by Legatees. The toys were part of an arrangement with the Department of Education. Schools would produce the toys, often in wood work classes and they were donated to Legacy and Carry On. The toys were given to Junior Legatees at the Government House Christmas Party. Excess toys were passed to a dozen additional charities. The scheme started in 1949 and by 1962 over 8,200 toys were donated, from 201 schools. The total to that date was over 72,500 toys. It appears to be 1963 as there was space for the tally to be completed. Was with many other slides taken in the 1950s and 1960s. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image is the best available.A record of toys donated to Legacy in the 1960s.Colour slide of legatees packing toys into tea chests, a Christmas tree and toys, in a white plastic mount and grey mount on the reverse.toys, department of education, toy appeal

Colour slide of school boys in a school work room where toys are being made. The toys were part of an arrangement with the Department of Education. Schools would produce the toys, often in wood work classes and they were donated to Legacy and Carry On. The toys were given to Junior Legatees at the Government House Christmas Party. Excess toys were passed to a dozen additional charities. The scheme started in 1949 and by 1962 over 8,200 toys were donated, from 201 schools. The total to that date was over 72,500 toys. It appears to be 1963 as there was space for the tally to be completed. Was with many other slides taken in the 1950s and 1960s. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image is the best available.A record of toys being made and donated to Legacy in the 1960s.Colour slide of school boys sitting on workbenches, in a white plastic mount and grey mount on the reverse.toys, department of education, toy appeal, school boys

Colour slide of school boys in a school work room where toys are being made. The toys were part of an arrangement with the Department of Education. Schools would produce the toys, often in wood work classes and they were donated to Legacy and Carry On. The toys were given to Junior Legatees at the Government House Christmas Party. Excess toys were passed to a dozen additional charities. The scheme started in 1949 and by 1962 over 8,200 toys were donated, from 201 schools. The total to that date was over 72,500 toys. It appears to be 1963 as there was space for the tally to be completed. Was with many other slides taken in the 1950s and 1960s. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image is the best available.A record of toys being made and donated to Legacy in the 1960s.Colour slide of school boys working at green workbenches, in a white plastic mount and grey mount on the reverse.toys, department of education, toy appeal, school boys

Colour slide of school children packaging toy wooden planes in boxes. The toys were part of an arrangement with the Department of Education. Schools would produce the toys, often in wood work classes and they were donated to Legacy and Carry On. The toys were given to Junior Legatees at the Government House Christmas Party. Excess toys were passed to a dozen additional charities. The scheme started in 1949 and by 1962 over 8,200 toys were donated, from 201 schools. The total to that date was over 72,500 toys. It appears to be 1963 as there was space for the tally to be completed. Was with many other slides taken in the 1950s and 1960s. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image is the best available.A record of toys being made and donated to Legacy in the 1960s.Colour slide of six school children working at packaging toys at a desk, in a white plastic mount and grey mount on the reverse.toys, department of education, toy appeal, school boys, school girls

Colour slide of large number of toys collected for distribution. There were wooden rocking horses and planes. Also soft toys such as Humpty Dumpty, teddies and koalas. The toys were part of an arrangement with the Department of Education. Schools would produce the toys, often in wood work classes and they were donated to Legacy and Carry On. The toys were given to Junior Legatees at the Government House Christmas Party. Excess toys were passed to a dozen additional charities. The scheme started in 1949 and by 1962 over 8,200 toys were donated, from 201 schools. The total to that date was over 72,500 toys. It appears to be 1963 as there was space for the tally to be completed. Was with many other slides taken in the 1950s and 1960s. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image is the best available.A record of toys donated to Legacy in the 1960s.Colour slide of toys stacked on a table with a board of statistics, in a white plastic mount and grey mount on the reverse.The board in the photo says 'These toys are distributed to the Legacy and Carry-On clubs. Any toys which are left over are distributed to at least a dozen other institutions.'toys, department of education, toy appeal

Colour slide of toys displayed near a Christmas tree. Three legatees are talking to seated ladies. One of the legatees is Frank Doolan. The toys were part of an arrangement with the Department of Education. Schools would produce the toys, often in wood work classes and they were donated to Legacy and Carry On. The toys were given to Junior Legatees at the Government House Christmas Party. Excess toys were passed to a dozen additional charities. The scheme started in 1949 and by 1962 over 8,200 toys were donated, from 201 schools. The total to that date was over 72,500 toys. It appears to be 1963 as there was space for the tally to be completed. Was with many other slides taken in the 1950s and 1960s. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image is the best available.A record of toys donated to Legacy in the 1960s.Colour slide of legatees, a Christmas tree and toys, in a white plastic mount and grey mount on the reverse.toys, department of education, toy appeal

Colour slide of school boys working on making toys in a school work room. There are stained glass windows on the right hand side. The toys were part of an arrangement with the Department of Education. Schools would produce the toys, often in wood work classes and they were donated to Legacy and Carry On. The toys were given to Junior Legatees at the Government House Christmas Party. Excess toys were passed to a dozen additional charities. The scheme started in 1949 and by 1962 over 8,200 toys were donated, from 201 schools. The total to that date was over 72,500 toys. It appears to be 1963 as there was space for the tally to be completed. Was with many other slides taken in the 1950s and 1960s. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image is the best available.A record of toys being made and donated to Legacy in the 1960s.Colour slide of school boys near green workbenches, in a white plastic mount and grey mount on the reverse.toys, department of education, toy appeal, school boys

Colour slide of school boys making toys in a school work room. There are coloured glass windows on the left hand side. The toys were part of an arrangement with the Department of Education. Schools would produce the toys, often in wood work classes and they were donated to Legacy and Carry On. The toys were given to Junior Legatees at the Government House Christmas Party. Excess toys were passed to a dozen additional charities. The scheme started in 1949 and by 1962 over 8,200 toys were donated, from 201 schools. The total to that date was over 72,500 toys. It appears to be 1963 as there was space for the tally to be completed. Was with many other slides taken in the 1950s and 1960s. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image is the best available.A record of toys being made and donated to Legacy in the 1960s.Colour slide of school boys working at green workbenches, in a white plastic mount and grey mount on the reverse.toys, department of education, toy appeal, school boys

Colour slide of school boys in white aprons in a school work room where toys are being made. The toys were part of an arrangement with the Department of Education. Schools would produce the toys, often in wood work classes and they were donated to Legacy and Carry On. The toys were given to Junior Legatees at the Government House Christmas Party. Excess toys were passed to a dozen additional charities. The scheme started in 1949 and by 1962 over 8,200 toys were donated, from 201 schools. The total to that date was over 72,500 toys. It appears to be 1963 as there was space for the tally to be completed. Was with many other slides taken in the 1950s and 1960s. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image is the best available.A record of toys being made and donated to Legacy in the 1960s.Colour slide of school boys working at workbenches, in a white plastic mount and grey mount on the reverse.toys, department of education, toy appeal, school boys

Colour slide of large number of toys collected for distribution. There were wooden rocking horses and planes. Also soft toys such as Humpty Dumpty, teddies and koalas. The toys were part of an arrangement with the Department of Education. Schools would produce the toys, often in wood work classes and they were donated to Legacy and Carry On. The toys were given to Junior Legatees at the Government House Christmas Party. Excess toys were passed to a dozen additional charities. The whiteboard of statistics show the scheme started in 1949 and by 1962 over 8,200 toys were donated, from 201 schools. The total to that date was over 72,500 toys. It appears to be 1963 as there was space for the tally to be completed. Was with many other slides taken in the 1950s and 1960s. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image is the best available.A record of toys donated to Legacy in the 1960s.Colour slide of toys stacked on a table with a board of statistics, in a white plastic mount and grey mount on the reverse.toys, department of education, toy appeal

Colour slide of large number of toys collected for distribution. There were wooden rocking horses, doll cribs and planes. Also soft toys such as Humpty Dumpty, teddies and koalas. The toys were part of an arrangement with the Department of Education. Schools would produce the toys, often in wood work classes and they were donated to Legacy and Carry On. The toys were given to Junior Legatees at the Government House Christmas Party. Excess toys were passed to a dozen additional charities. The scheme started in 1949 and by 1962 over 8,200 toys were donated, from 201 schools. The total to that date was over 72,500 toys. It appears to be 1963 as there was space for the tally to be completed. Was with many other slides taken in the 1950s and 1960s. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image is the best available.A record of toys donated to Legacy in the 1960s.Colour slide of toys stacked on a table, in a white plastic mount and grey mount on the reverse.toys, department of education, toy appeal

Colour slide of large number of toys collected for distribution and a legatee thanking a schoolgirl. There were wooden rocking horses and planes. Also soft toys such as Humpty Dumpty, teddies and koalas. The toys were part of an arrangement with the Department of Education. Schools would produce the toys, often in wood work classes and they were donated to Legacy and Carry On. The toys were given to Junior Legatees at the Government House Christmas Party. Excess toys were passed to a dozen additional charities. The scheme started in 1949 and by 1962 over 8,200 toys were donated, from 201 schools. The total to that date was over 72,500 toys. It appears to be 1963 as there was space for the tally to be completed. Was with many other slides taken in the 1950s and 1960s. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image is the best available.A record of toys donated to Legacy in the 1960s.Colour slide of a legatee thanking a school girl near a table stacked with toys, in a white plastic mount and grey mount on the reverse.The board in the photo says 'These toys are distributed to the Legacy and Carry-On clubs. Any toys which are left over are distributed to at least a dozen other institutions.'toys, department of education, toy appeal

Colour slide of two legatees and a school boy near a large number of toys collected for distribution. One man is Ivan Layton the CEO of Legacy for 30 years. There were wooden rocking horses and planes. Also soft toys such as Humpty Dumpty, teddies and koalas. The toys were part of an arrangement with the Department of Education. Schools would produce the toys, often in wood work classes and they were donated to Legacy and Carry On. The toys were given to Junior Legatees at the Government House Christmas Party. Excess toys were passed to a dozen additional charities. The scheme started in 1949 and by 1962 over 8,200 toys were donated, from 201 schools. The total to that date was over 72,500 toys. It appears to be 1963 as there was space for the tally to be completed. Was with many other slides taken in the 1950s and 1960s. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image is the best available.A record of toys donated to Legacy in the 1960s.Colour slide of two legatees thanking a school boy near a table stacked with toys, in a white plastic mount and grey mount on the reverse.The board in the photo says 'These toys are distributed to the Legacy and Carry-On clubs. Any toys which are left over are distributed to at least a dozen other institutions.'toys, department of education, toy appeal

Colour slide of four legatees loading toys onto a truck. They may have been collecting toys from a school. The truck could have been owned by one of the legatees and used for the collection. The sign on the side says 'Tendercut. The best meat you can buy'. The toys were part of an arrangement with the Department of Education. Schools would produce the toys, often in wood work classes and they were donated to Legacy and Carry On. The toys were given to Junior Legatees at the Government House Christmas Party. Excess toys were passed to a dozen additional charities. The scheme started in 1949 and by 1962 over 8,200 toys were donated, from 201 schools. The total to that date was over 72,500 toys. It appears to be 1963 as there was space for the tally to be completed. Was with many other slides taken in the 1950s and 1960s. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image is the best available.A record of toys being made and donated to Legacy in the 1960s.Colour slide of four legatees loading toys into a truck with 'Tendercut' painted on the side, in a white plastic mount and grey mount on the reverse.toys, department of education, toy appeal

These hand planes belonged to Ernest Brighton Phillips (1875-1924). Born in Warrnambool, Ernest Phillips learned cabinet-making at the Warrnambool Box Works. In the late 1890s he established his own furniture store at the corner of Liebig and Koroit Streets. By the early 20th century Phillips had the largest furniture warehouse and factory in Victoria outside of Melbourne. He sold his products all over Australia. He and his family lived at ‘Heatherlie’ in Koroit Street and the site of this home is now the complex of flats for senior citizens known as ‘Heatherlie’. These tools are of considerable interest as they belonged to Ernest Phillips, a prominent Warrnambool businessman in the late 19th and early 20th centuries. They are also a good example of the tools that were used 100 years ago. These are eight woodworking tools (hand planes) which belonged to Ernest Phillips of Warrnambool. They are rectangular pieces of smooth wood, some with an extra piece of wood at the lower edge and they all have a metal blade inserted through the wood at an angle. The blade protrudes at the base of the wood and when moved by hand along a surface it shapes the piece of wood being worked on by flattening and smoothing the rough surface and reducing the thickness. These planes have been well-used.‘E. Phillips’ernest phillips, history of warrnambool, warrnambool

Hugh LEGGE Hugh Legge attended the Canberra School of Art (at time of Alan Peascod) and moved to Rosedale (near Batemans Bay) back in the 1980s where he was wood firing. His work may be marked with an impressed 'HL' in a circleWoodfired bottlehugh legge, ceramics, jan feder memorial ceramics collection, gippsland campus

Hugh LEGGE Hugh Legge attended the Canberra School of Art (at time of Alan Peascod) and moved to Rosedale (near Batemans Bay) back in the 1980s where he was wood firing. His work may be marked with an impressed 'HL' in a circleWoodfired bottle with handlehugh legge, ceramics, jan feder memorial ceramics collection, gippsland campus

Very old. A drawknife is used to remove large slices of wood for flat faceted work, to debark trees, or to create roughly rounded edges. Can be used to shape the curve of a cricket bat. Used by woodworkers in the Kiewa Valley.Steel frame with wooden handles at each end and a sharp steel blade attached in the middle.Ref. Page 83 Tools for all Trades Catalogue.The drawknife / drawing knife,/ draw shave, / shaving knife is a traditional woodworking hand tool used to shape wood by removing shavings. The blade is much longer (along the cutting edge) than it is deep. It is pulled towards the user. woodworking tool, drawing knife, hand tool

There were at least three 1880s vessels named Lady Loch, all built in Victoria; a river launch (ca 1884-ca 1916, originally named Lady of the Lake), a steamer ferry (1884-1920s) and a government lighthouse tender steamer HMV Lady Loch (1886-1962.) The carved wooden panel was removed from the HMV SS Lady Loch before the vessel was scuttled in 1962. About HMV SS Lady Loch: - The HMV SS Lady Loch was an iron steamship built in Footscray, Melbourne, by Campbell, Sloss and McCain in 1886 for the colonial Victorian government’s Department of Trade and Customs. It was armed with a 6-inch gun and two 1-inch Nordenfelt guns. The Sydney Morning Herald of 27th January 1888 describes the vessel in detail. It even comments on the interior of the Saloon “The wood work … is on a very elaborate scale and is exceedingly neat …”. The HMV Lady Loch performed Customs duties, and serviced the lighthouses along the coast. The scale could have measured goods for the Customs Tax, or for measuring out supplies for the lighthouse keepers. The vessel was named after Lady Elizabeth Loch, wife of Sir Henry Loch, Governor of Victoria from 1884 to 1889. In 1932 Lady Loch was converted to a hulk and used in Brisbane, and finally scuttled in 1962 at Moreton Bay, Queensland. The carved wood panel has importance due to its connection to the 1886 HMV Lady Loch, a vessel of great significance to Melbourne’s shipbuilding industry. It was the largest auxiliary vessel in the Victorian Colonial Government’s fleet and the first prominent vessel launched by Melbourne’s shipbuilding industry. It is significant to the history of the Victorian era and the colonial navy's steamship HMV SS Lady Loch. The vessel carried out Custom's work, and the scales were available to weigh goods that could attract taxes and goods for distribution to lighthouse keepers. The HMV Lady Loch was also important part of Victoria's maritime history, its communication with and support of the lighthouse keepers along the coast of Victoria.Heavy carved wooden panel, square, representing a framed plaque. The bottom and right edges are scalloped on the outer and inner edges. A carved oval within the frame represents a wide belt with buckle and tongue, and indents for the belt holes on its left and a carved inscription runs from top centre to bottom centre on the right side of the belt. Within the belt is the maritime symbol of an upright anchor in front of a rope. It was once part of the furnishing of the steamer HMVS Lady Loch and was removed before the ship was scuttled.Carved within the belt: "STEAM SHIP LADY LOCH"warrnambool, shipwreck coast, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, scale, salter, spring balance, silvester's patent, lady loch, steamship, hmv, colonial navy, victoria, lady elizabeth loch, custom's vessel, lighthouse tender, 1886, government vessel, victorian government, wood panel, timber panel, carved panel, carved log, lady loch logo, belt enclosing and anchor, anchor within belt, lady loch steam ship, wooden panel, ship's furinshing, ship's panel, ship's logo, great ocean road, government steamer, victorian colonial government, colonial vessel, public works, bass straight, hmv lady loch, hmvs lady loch, hmv ss lady loch, melbourne, melbourne shipbuilder, ship furnishings, wooden furnishings, decorative panel, carved emblem, carved logo, carved symbol, campbell stoss and mccain, government tender, victorian customs

Samuel Amess, who bought Churchill island in 1872 was a Presbyterian Scot as also was James Balfour. There may have been a personal link.T square made from printer's plate, metal and wood, riveted together with 10 rivets and a hanging hole in top centre of wood.One side, metal: Balfour, Elliott and Company Limited/ Incorporated under the Companies Statute 1884 /20 Queen St MELBOURNE / Capital L250,000 in 250,000 shares of L1 each / This is to certify that... / is the property of .../ Part of circle printing in join with wood and scroll work on metal at join. Other side: scratched in "H R Balfour"james balfour, e.c elliott, balfour, presbyterian, t square, square, tool, tools, amess, samuel, churchill island

Newspaper cutting from The Courier, Ballarat, Tuesday 6/9/1994, from the Heritage section of the Courier, by saving of ESCo No. 12 on the BTPS. Quotes Gary Wood about the work being undertaken, where the tram was recovered from, its brief history, and the relevance to the collection. Includes a photo of Gary working on the body inside the depot. Item written by Lorrie Brown, includes a photo of her as well. Second copy added 03/06/2006.In right hand corner in blue ink "8/9/94 Tues"trams, tramways, 12, esco, tramcar acquisition, btps, preservation

There were at least three 1880s vessels named Lady Loch, all built in Victoria; a river launch (ca 1884-ca 1916, originally named Lady of the Lake), a steamer ferry (1884-1920s) and a government lighthouse tender steamer HMV Lady Loch (1886-1962.) The spring balance scale was part of the equipment on the HMV Lady Loch. The scale was made by the renowned company Salter Weighing Machines in the United Kingdom. It was made to Silvester's patent design. Salter Weighing Machines, Britain, began making spring scales in the 1820s. In 1908 Salter opened up an Australian branch named Salter Scales Pty. Ltd. The scale, marked HMV SS Lady Loch, would be suspended by its top ring, a basket or other container is hung from the hook, and the items inside the basket then pull downwards on the hook, which stretches the springs inside the works. The pulling action moves a rack and gears a calculated distance and the gears turn the pointer on the dial to indicate the weight of the goods. This scale measures up to 200 pounds capacity. The HMV SS Lady Loch was an iron steamship built in Footscray, Melbourne, by Campbell, Sloss and McCain in 1886 for the colonial Victorian government’s Department of Trade and Customs. It was armed with a 6-inch gun and two 1-inch Nordenfelt guns. The Sydney Morning Herald of 27th January 1888 describes the vessel in detail. It even comments on the interior of the Saloon “The wood work … is on a very elaborate scale and is exceedingly neat …”. The HMV Lady Loch performed Customs duties, and serviced the lighthouses along the coast. The scale could have measured goods for the Customs Tax, or for measuring out supplies for the lighthouse keepers. The vessel was named after Lady Elizabeth Loch, wife of Sir Henry Loch, Governor of Victoria from 1884 to 1889. In 1932 Lady Loch was converted to a hulk and used in Brisbane, and finally scuttled in 1962 at Moreton Bay, Queensland.The scale has importance due to its connection to the 1886 HMV Lady Loch, a vessel of great significance to Melbourne’s shipbuilding industry. It was the largest auxiliary vessel in the Victorian Colonial Government’s fleet and the first prominent vessel launched by Melbourne’s shipbuilding industry. The scale is also important for its connection with the colonial navy's Custom's work, as the scale was available to weigh goods that could attract taxes and deal out goods for distribution to lighthouse keepers. The HMV Lady Loch was also important part of Victoria's maritime history for its communication and support of the lighthouse keeper's along the coast of Victoria.Scale; Salter's spring balance mechanical hanging scale, brass and iron. Equally spaced marks around the circular dial have values from 0 to 200 in increments of 10, each increment is also divided into 10. An iron ring is attached to a fitted loop on the top of the scale, and an iron hook is attached to the fitted loop onthe bottom of the scale. A moving pointer attached to the centre of the dial has a calibration screw joined to its base. Four screws fix the brass face to the works at the back. There are stamped and embossed inscriptions. Made by Salter in Britain, to Silvester's Patent design. The scale was once equipment carried abourd the steamship HMV SS Lady Loch. Stamped: "SALTER'S / SPRING BALANCE" "SILVESTOR'S / PATENT" Embossed in script: "HMV SS / Lady Loch"warrnambool, shipwreck coast, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, scale, salter, spring balance, silvester's patent, lady loch, steamship, hmv, colonial navy, victoria, lady elizabeth loch, custom's vessel, lighthouse tender, 1886, government vessel, victorian government, measuring instrument, weight, weighing instrument, mechanical scale, hanging scale

A draw knife or drawing knife, draw shave, shaving knife is a traditional woodworking hand tool used to shape wood by removing shavings. It consists of a blade with a handle at each end. The blade is much longer along the cutting edge than it is deep (from cutting edge to back edge). It is pulled or "drawn" toward the user. A draw knife is commonly used to remove large slices of wood for flat faceted work, to debark trees, or to create roughly rounded or cylindrical billets for further work on a lathe, or it can shave like a spokeshave plane, where finer finishing is less of concern than a rapid result. The thin blade lends itself to create complex concave or convex curves such as in making staves for barrels.A specialised tool used in many different types of wood working and in the making of barrels, this type of tool has been used for many hundreds of years by coopers and other woodworking craftsmen all around the world. It is a tool that has not changed in design during this time and is still used today by craftsmen in the making of wooden barrels for the storage of wines etc. However this item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Draw knife with metal blade and two wooden handlesNoneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, draw knife, coopers tools, woodworking tools, knife, cooperage

A draw knife or drawing knife, draw shave, shaving knife is a traditional woodworking hand tool used to shape wood by removing shavings. It consists of a blade with a handle at each end. The blade is much longer along the cutting edge than it is deep (from cutting edge to back edge). It is pulled or "drawn" toward the user. A draw knife is commonly used to remove large slices of wood for flat faceted work, to debark trees, or to create roughly rounded or cylindrical billets for further work on a lathe, or it can shave like a spokeshave plane, where finer finishing is less of concern than a rapid result. The thin blade lends itself to create complex concave or convex curves such as in making staves for barrels.A specialised tool used in many different types of wood working and in the making of barrels, this type of tool has been used for many hundreds of years by coopers and other woodworking craftsmen all around the world. It is a tool that has not changed in design during this time and is still used today by craftsmen in the making of wooden barrels for the storage of wines etc.Draw knife with metal blade and two wooden handlesNoneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, draw knife, coopers tools, woodworking tools, knife, cooperage

A draw knife or drawing knife, draw shave, shaving knife is a traditional woodworking hand tool used to shape wood by removing shavings. It consists of a blade with a handle at each end. The blade is much longer along the cutting edge than it is deep (from cutting edge to back edge). It is pulled or "drawn" toward the user. A draw knife is commonly used to remove large slices of wood for flat faceted work, to debark trees, or to create roughly rounded or cylindrical billets for further work on a lathe, or it can shave like a spokeshave plane, where finer finishing is less of concern than a rapid result. The thin blade lends itself to create complex concave or convex curves such as in making staves for barrels.A specialised tool used in many different types of wood working and in the making of barrels, this type of tool has been used for many hundreds of years by coopers and other woodworking craftsmen all around the world. It is a tool that has not changed in design during this time and is still used today by craftsmen in the making of wooden barrels for the storage of wines etc.Draw knife with metal blade and two wooden handlesMarkings on blade unreadable flagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, draw knife, coopers tools, woodworking tools, knife, cooperage

A draw knife or drawing knife, draw shave, shaving knife is a traditional woodworking hand tool used to shape wood by removing shavings. It consists of a blade with a handle at each end. The blade is much longer along the cutting edge than it is deep (from cutting edge to back edge). It is pulled or "drawn" toward the user. A draw knife is commonly used to remove large slices of wood for flat faceted work, to debark trees, or to create roughly rounded or cylindrical billets for further work on a lathe, or it can shave like a spokeshave plane, where finer finishing is less of concern than a rapid result. The thin blade lends itself to create complex concave or convex curves such as in making staves for barrels.A specialised tool used in many different types of wood working and in the making of barrels, this type of tool has been used for many hundreds of years by coopers and other woodworking craftsmen all around the world. It is a tool that has not changed in design during this time and is still used today by craftsmen in the making of wooden barrels for the storage of wines etc. However this item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Draw knife with metal blade and two wooden handlesNoneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, draw knife, coopers tools, woodworking tools, knife, cooperage

A draw knife or drawing knife, draw shave, shaving knife is a traditional woodworking hand tool used to shape wood by removing shavings. It consists of a blade with a handle at each end. The blade is much longer along the cutting edge than it is deep (from cutting edge to back edge). It is pulled or "drawn" toward the user. A draw knife is commonly used to remove large slices of wood for flat faceted work, to debark trees, or to create roughly rounded or cylindrical billets for further work on a lathe, or it can shave like a spokeshave plane, where finer finishing is less of concern than a rapid result. The thin blade lends itself to create complex concave or convex curves such as in making staves for barrels.A specialised tool used in many different types of wood working and in the making of barrels, this type of tool has been used for many hundreds of years by coopers and other woodworking craftsmen all around the world. It is a tool that has not changed in design during this time and is still used today by craftsmen in the making of wooden barrels for the storage of wines etc. However this item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Draw knife with metal curved blade and two wooden handlesNoneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, draw knife, coopers tools, woodworking tools, knife, cooperage