This is one of a collection of items associated with Dr Felix Henry Meyer (1858-1937). Meyer was a very prominent early obstetrician and doctor, playing a part in the establishment of the role of the chair of obstetrics at the University of Melbourne in 1929. He was also a foundation member of the Royal Australian College of Surgeons.Metal surgical tool with bakelite handle. Tool consists of a metal shaft with a hook/clip at the end. Metal fixture on the side of the shaft, just above the handle, can be used to open and close the loop of the hook.surgery

The attribution of this item as a thyroid elevator is currently uncertain.This is one of a collection of items associated with Dr Felix Henry Meyer (1858-1937). Meyer was a very prominent early obstetrician and doctor, playing a part in the establishment of the role of the chair of obstetrics at the University of Melbourne in 1929. He was also a foundation member of the Royal Australian College of Surgeons.Surgical tool. Consists of a central shaft, the shape of which bows out in the middle into an elongated oval, with prongs in the shape of double hooks at either end. Inscription on one end of the tool reads 'MAYER & MELTZER', and inscription at the other end reads 'LONDON'.'MAYER & MELTZER' 'LONDON'surgery

This is one of a collection of items associated with Dr Felix Henry Meyer (1858-1937). Meyer was a very prominent early obstetrician and doctor, playing a part in the establishment of the role of the chair of obstetrics at the University of Melbourne in 1929. He was also a foundation member of the Royal Australian College of Surgeons.Surgical tool consisting of four metal prongs, extending from a frame in the rough shape of a pointed oval. The two lower prongs are straight, and the two upper prongs taper downwards towards the lower prongs. The top of the frame has a butterfly type screw point and two handles/finger grips.surgery

This is one of a collection of items associated with Dr Felix Henry Meyer (1858-1937). Meyer was a very prominent early obstetrician and doctor, playing a part in the establishment of the role of the chair of obstetrics at the University of Melbourne in 1929. He was also a foundation member of the Royal Australian College of Surgeons.Set of tissue forceps. Forceps resemble a thin, elongated pair of scissors with a locking latch below the handle and a round loop at the end of each blade.surgery

This is one of a collection of items associated with Dr Felix Henry Meyer (1858-1937). Meyer was a very prominent early obstetrician and doctor, playing a part in the establishment of the role of the chair of obstetrics at the University of Melbourne in 1929. He was also a foundation member of the Royal Australian College of Surgeons.Set of tissue forceps. Forceps resemble a thin, elongated pair of scissors with a locking latch below the handles and a round loop at the end of each blade. The blades of these forceps curve in towards each other just below the locking latch. The pin joining the blades together is a loose fit, meaning the blades are easily separated.surgery

This is one of a collection of items associated with Dr Felix Henry Meyer (1858-1937). Meyer was a very prominent early obstetrician and doctor, playing a part in the establishment of the role of the chair of obstetrics at the University of Melbourne in 1929. He was also a foundation member of the Royal Australian College of Surgeons.Set of tissue forceps. Forceps resemble a thin, elongated pair of scissors with a locking latch below the handle and a small, curved claw with three teeth at the end of each blade. The blades of these forceps curve in towards each other just below the locking latch. Manufacturer's inscription on the forceps reads 'MAYER & MELTZER LONDON'.'MAYER & MELTZER LONDON'surgery

Adenoid curettes are used to remove infected or inflamed adenoids. Their sharp inner blade removes the adenoid in an atraumatic manner without causing harm to the surrounding tissues.This is one of a collection of items associated with Dr Felix Henry Meyer (1858-1937). Meyer was a very prominent early obstetrician and doctor, playing a part in the establishment of the role of the chair of obstetrics at the University of Melbourne in 1929. He was also a foundation member of the Royal Australian College of Surgeons.Metal curette (surgical scraping tool). Consists of a handle section with divots for ergonomic finger grip, and a straight, thin metal shaft which forks into two small arms with a cutting blade between them at the tips. The arms at the end of the shaft are curved so that the blade is perpendicular to the shaft of the instrument. Shaft of the curette is engraved with the text 'MEDICAL SUPPLY DEPOT''MEDICAL SUPPLY DEPOT'surgery

This is one of a collection of items associated with Dr Felix Henry Meyer (1858-1937). Meyer was a very prominent early obstetrician and doctor, playing a part in the establishment of the role of the chair of obstetrics at the University of Melbourne in 1929. He was also a foundation member of the Royal Australian College of Surgeons.Double headed metal curette (surgical scraping tool). Consists of a thin metal shaft with a small cutting blade in the shape of an open loop at one end, and a solid metal scoop at the other end. There is an ergonomic grip at the middle of the tool. surgery

This is one of a collection of items associated with Dr Felix Henry Meyer (1858-1937). Meyer was a very prominent early obstetrician and doctor, playing a part in the establishment of the role of the chair of obstetrics at the University of Melbourne in 1929. He was also a foundation member of the Royal Australian College of Surgeons.Metal clamping tool, possibly associated with bone surgery. The instrument has a heavy-duty clamp style head at one end, and a bolt with a butterfly screw at the other end for locking the clamp in place. The handles of the tool are engraved with the text 'MAYER &/MELTZER' on one handle, and 'LONDON' on the other.'MEYER &/MELTZER' 'LONDON'surgery

This is one of a collection of items associated with Dr Felix Henry Meyer (1858-1937). Meyer was a very prominent early obstetrician and doctor, playing a part in the establishment of the role of the chair of obstetrics at the University of Melbourne in 1929. He was also a foundation member of the Royal Australian College of Surgeons.Set of metal forceps. The forceps resemble a set of pliers, with cutting blades at the end of the handles. The handles of the tool are engraved with the text 'MAYER &/MELTZER' on one handle, and 'LONDON' on the other.'MEYER &/MELTZER' 'LONDON'surgery

This case was designed to hold 1ml syringes.This is one of a collection of items associated with Dr Felix Henry Meyer (1858-1937). Meyer was a very prominent early obstetrician and doctor, playing a part in the establishment of the role of the chair of obstetrics at the University of Melbourne in 1929. He was also a foundation member of the Royal Australian College of Surgeons.Small metal syringe case. The inside of the case has metal fittings to hold two syringes. Case is empty.surgery

This instrument may be associated with an optical procedure, but attribution is uncertain.This is one of a collection of items associated with Dr Felix Henry Meyer (1858-1937). Meyer was a very prominent early obstetrician and doctor, playing a part in the establishment of the role of the chair of obstetrics at the University of Melbourne in 1929. He was also a foundation member of the Royal Australian College of Surgeons.Set of metal forceps. Consists of scissor-like handles and shaft, ending in a set of fittings that make an oval shape when the forceps are closed. There are two small, curved claws on the inner aspect of both halves of the fittings. One side of forceps is engraved with the text 'MAYER & MELTZER/RECd No 298644'. 'MAYER & MELTZER/RECd No 298644'. surgery

This is one of a collection of items associated with Dr Felix Henry Meyer (1858-1937). Meyer was a very prominent early obstetrician and doctor, playing a part in the establishment of the role of the chair of obstetrics at the University of Melbourne in 1929. He was also a foundation member of the Royal Australian College of Surgeons.Metal optometer. Consists of a glass lens, metal scale and a sliding sight test plate. The words 'CONVEX' and 'CONCAVE' are engraved on the side of the scale. Top of the scale is engraved with various measurements. Test plate is engraved with the words 'COUNT THE DOTS' and a series of dots.optometry

Used for surgery relating to the thyroid gland.This is one of a collection of items associated with Dr Felix Henry Meyer (1858-1937). Meyer was a very prominent early obstetrician and doctor, playing a part in the establishment of the role of the chair of obstetrics at the University of Melbourne in 1929. He was also a foundation member of the Royal Australian College of Surgeons.Set of metal forceps. Design resembles a pair of scissors, consisting of two blades, joined with a pin, with a ratchet for clamping below the finger grips/handles. At the end of each blade of the forceps is a three pronged claw. The manufacturer's name, 'MEDICAL SUPPLY DEPOT', is engraved on one of the blades.'MEDICAL SUPPLY DEPOT'surgery

These forceps may be a version of Tate's uterine forceps. This is one of a collection of items associated with Dr Felix Henry Meyer (1858-1937). Meyer was a very prominent early obstetrician and doctor, playing a part in the establishment of the role of the chair of obstetrics at the University of Melbourne in 1929. He was also a foundation member of the Royal Australian College of Surgeons.Set of metal scissor style forceps. Consists of two blades, joined with a pin, with a ratchet for clamping below the finger grips/handles. The end of each blade of the forceps is curved, and the inner surface at the end of each blade is serrated for grip. surgery

These forceps are a type of uterine forceps used for gynaecological procedures. This is one of a collection of items associated with Dr Felix Henry Meyer (1858-1937). Meyer was a very prominent early obstetrician and doctor, playing a part in the establishment of the role of the chair of obstetrics at the University of Melbourne in 1929. He was also a foundation member of the Royal Australian College of Surgeons.Set of metal scissor style forceps. Consists of two blades, joined with a pin, with a small ratchet for clamping below the finger grips/handles. The end of the forceps curves to one side, and each blade of the forceps ends with a hook. When the forceps are closed, the hooks on either blade join together to make a loop.surgery

These forceps are believed to be a type of uterine forceps. More research needed.This is one of a collection of items associated with Dr Felix Henry Meyer (1858-1937). Meyer was a very prominent early obstetrician and doctor, playing a part in the establishment of the role of the chair of obstetrics at the University of Melbourne in 1929. He was also a foundation member of the Royal Australian College of Surgeons.Set of metal scissor forceps. Consists of two blades, joined with a pin, with finger grips/handles at one end. Each blade of the forceps ends with a fine, curved point. When the forceps are closed, the tips of the blades touch. Engraved with the text ' BRITISH MEDICAL SUPPLY', the number 20, a symbol, and the text 'PAT.5.3.92.''BRITISH MEDICAL SUPPLY', 'PAT.5.3.92.'surgery

The Bruck Inhaler is a modification of the Clover Inhaler, designed by Lambert Bruck. Bruck added a glass dome which enabled the level of ether to be monitored during administration. This was a revolutionary change as it removed guess work from the process.The Bruck Inhaler is a historically, aesthetically and scientifically significant piece. The basic design is based on the Clover Inhaler, but with a rounded bottom. The idea of a glass viewing window was possibly inspired by Wilson-Smith Inhaler. The Bruck Inhaler is historically significant as it is the first inhaler to be made with a completely clear lower glass section. This improved the usability for the ether administrator, and eliminated much of the guesswork associated with dosage and ether levels, which in turn improved the patient experience. This piece provides a strong local link to both anaesthetic and general medical practice at the turn of the century. The design is credited to Ludwig Bruck of Sydney, and was presumably manufactured in the same area. Bruck, as the attributed designer, holds much relevance to the significance of the object, as connected with him is much historical information about the social context of medical practice. Ludwig Bruck was a prominent figure in the medical industry. He started his medical career in Sydney as a Medical Transfer Agent, and later owned a shop at 16 Castlereagh Street, Sydney. This business is listed in the 1903 Register of Firms as a Medical Agent and Importer of Medical Instruments and Books. Bruck was vocal as a journalist and published analyses of medical statistics, as well as the well known Australasian Medical Dictionary and Handbook, which included the “List of Unregistered Medical Practitioners”. Ludwig Bruck was an immigrant. He was of German descent, which placed him in a precarious position within Sydney society during the turn of century. Bruck conducted several public conversations with prominent members of the Australian Natives Association through the Sunday News in regards to his disagreement of the employment of medical practitioners by the ANA specifically to corroborate their health insurance policies. He was also a stalwart supporter of the Australian arm of the British Medical Association, being the publisher of the first and subsequent editions of The Australian Medical Gazette. Bruck chose to end his life with a combination of poison and chloroform on 14 August 1915, after being accused of trading with the enemy during World War One. His suicide note stated his horror at leaving his business partner to deal with the tarring of his reputation as the reason for his decision. The Bruck Inhaler has aesthetic significance as it is a beautiful example of turn of the century surgical design and craftsmanship. Aseptic methods of surgery were well known by 1909, and the aesthetic design of the Bruck Inhaler conformed to these principles. The ability for the surgeon to unscrew, clean and sterilize each part of the Inhaler contributes to the streamlined design of the piece. The Buck Inhaler holds scientific significance. There is the capacity for further research to be undertaken on the object. Geoffrey Kaye often collected multiple examples of equipment, usually one for reverse engineering and another for teaching. There are currently two examples of the Bruck Inhaler in the collection, presenting an opportunity for further technical research on the object. The inhaler is oval shaped with one half made of glass to allow observation of the ether level. A vertical cross tube, 22mm in diameter passes between the face-piece and the bag [missing]. There is a stopcock for admission of oxygen or nitrous oxide opposite the bag attachment. There is a central tube, 28mm in diameter, with controllable ports on either side. There is also a tear-drop shaped fask mask.Hand engraved on side of base: L. Bruck / Sydneyclover, joseph, bruck, lambert, inhaler, rebreather, nitrous oxide, oxygen, williams, probyn

Hygieia (Ύγεια, lit., “healing”) probably began as an abstraction, which later became personified. She does not appear to be a deity of extremely ancient origin, and there has been much scholarly debate as to exactly where and when worship of her first developed. Her cult most likely arose in the territory of Sikyon, where she was worshipped along with Asklepios, the legendary god of medicine. In later times Hygieia came to be regarded as the daughter of Asklepios, although her cult was not introduced to Epidauros, his principal sanctuary, until at least the 4th century BC. The earliest large-scale devotion to her is found in the aftermath of the Plague of Athens (420BC). The cult of Hygieia was taken to Rome, along with that of Asklepios (Æsculapius), in 293BC, to avert a pestilence. Here she gradually became integrated with the old Italian god Salus. Towards the end of the pagan era both Hygieia and Asklepios lost their specific associations with medicine, and became general protective deities. A beautiful wooden statue representing Hygieia, the Greek goddess of health.The figure is highly polished, which brings out the intricate grain of the timber. In it, the sculptor has endeavoured to combine the qualities of a classical pose with a contemporary yet timeless surreal sensuality. It will stand on a stone pedestal about 90cm high, and be placed in a prominent location in the Melbourne headquarters. The College’s statue is semi-abstract in style, carved from a single piece of jarrah. The piece of timber from which it is fashioned was salvaged from the remains of a century-old shearing shed on Rifle Downs, at Darkan in the south-west of Western Australia.

Georg Chodziesner made this chanukiah in Hay Camp in 1940. It was made to celebrate the Jewish festival of Chanukah. Georg was born in 1900 in Berlin to a prominent Jewish advocate Justizrat, Ludwig and wife Elise. Fearing arrest at the outbreak of war, Georg fled Germany to the United Kingdom. His wife, Dorothea, and son, Wolfgang Benno, emigrated to Chile. Like many German Jewish men, Georg found himself on board the HMT Dunera, bound for interment at Tatura. On release, Georg joined the Australian Army 8th Employment Company in which he served for the remainder of the war. Georg sought permission for his son to join him in Australia, and the pair were reunited in Melbourne in May 1945. Dorothea had passed away from illness in 1943. After settling in Australia, Georg worked as a Patent Attorney and remained working at the same firm until his death in 1981.This Chanukiah was cut from a kerosene tin using nail scissors and mounted on a wood block base. Medium: Wood, tin and ink The Chanukiah is embossed with a Magen David, the Star of David, and the wooden base has a poker work inscription: "Hay 5701 / 1940".dunera, wwii, internment, jewish history & people

The St Kilda Presbyterian Church is now part of the St Kilda & Balaclava Presbyterian Church. Its first service was inaugurated by the Free Church Synod of Victoria in May 1855, in a building at the corner of High Street and Alma Road. In October 1855 the congregation moved to a wooden building in Inkerman Street, purchased from the Independent (Congregational) Church. The present church site was purchased and the first church opened in 1860. The foundation stone for the present church building, the second to be built on the site, was laid by the Governor of Victoria, Sir Henry Brougham Loch, on 27 January 1885. The building was opened on 30 May 1886. Wilson and Beswicke were the architects. Ralph Wilson designed the Methodist church on the corner of Princes and Fitzroy Streets and lived diagonally opposite the Presbyterian church. Charles Beswicke had toured Britain and the Continent in 1886 armed with a camera and returned to Australia with photographs of what he considered the greatest examples of architecture. He was responsible for the town halls in Brighton, Malvern, Hawthorn and Essendon and Wesleyan churches in Camberwell and Dandenong. Thomas Corley was the builder. The lofty spire was ‘a landmark to the mariner’ used by sea captains sailing up Port Phillip Bay. On a prominent position, the highest point in St Kilda, the church attracted wealthy people with legal, merchant and pastoral backgrounds.colour photographst kilda, churches, presbyterian church, balaclava

Pump - Billabong Ram Pump Size #5 Based on available historical data, the Australian-made Billabong Hydraulic Ram is one of the oldest rams produced anywhere in the world The Billabong Hydraulic Ram was first introduced into Australia in 1855 by John Danks and Son Limited, John Danks & Son Pty Ltd began as a plumbing business in 1859, established by brothers John and Samuel. It occupied a prominent site in Bourke Street, Melbourne, for 100 years. The business quickly grew to include factories in Melbourne and Sydney which manufactured and supplied a variety of plumbing and engineering products such as brassware, pumps, windmills and bells. The company was registered in Victoria on 25 January 1889 to continue the hardware manufacturing and supply business founded by brothers John and Samuel Danks in 1859. The head office was based in Bourke Street, Melbourne while another branch was established in Sydney in the 1880s. The company had factories in Melbourne and Sydney. The John Danks and Son Limited catalogue published in 1890, listing Billabong Hydraulic Rams as one of its major machinery products. The catalogue also provides reference to the company’s ram experience and manufacture, beginning by stating that in 1890 they already had 35 years of experience with Billabong Hydraulic Rams. The Hydraulic Ram has stood the test of time and it remains one of the few really practical and efficient uses of natural energy today. It operates without almost any cost, will last indefinitely and, with only two moving parts, is simplicity itself. It requires minimum maintenance and minimum replacement of parts. It is not uncommon to find rams working continuously for many years without any attention. • The Rams do not require electricity, fuel or steam to operate. • They possess simplicity of construction and operation – only 2 moving parts. • Powered only by running water. • Require very minimal or almost no maintenance. • Heavy duty cast Iron base and Dome. This Pump recovered from the Clematis Creek in the Mid 1970's Used to pump water from the creek to the Paradise (Clematis) Hotel. Historic - Farm Equipment - Used to pump water from the creek to the Paradise (Clematis) Hotel.Cast Iron Bronze valveBillabong 5billabong, puffing billy, ram pump

This memorial commemorates the ideas of mateship through using the legend of the Pikeman’s Dog. According to the legend, the Pikeman's Dog 'Wee Jock' stayed by his masters side during the Eureka rebellion and stood guard over his body and grave. The dog was awarded a Purple Cross by the RSPCA for service to humans in 1997 and a bronze life-size sculpture commemorating him was unveiled on December 3rd 1999 at the Anniversary of the Eureka Stockade Rebellion, in Ballarat, Victoria. The bronze Irish Terrier has an expression of his sadness with his his head turned towards the place where once his master stood. This statue was relocated from inside the Eureka Centre to a more prominent position within the Eureka Stockade Memorial Park when the Museum of Democracy at Eureka (M.A.D.E) was constructed. The new memorial was unveiled at a ceremony on December 3, 2014 - the 160th anniversary of the Eureka Stockade. The new memorial consists of 22 large golden stockade posts – representing the number of diggers killed in battle – erected in a triangle behind the statue of Wee Jock, the work could be viewed from the cafe area of the Museum of Australian Democracy at Eureka. The triangular shape of the monument is metaphorically symbolic. The V shape can be interpreted as symbolising victory, and the 22 golden posts represent the 22 diggers who were killed. At the time of awarding the building the new memorial in July, the sculpture artists Charles Smith and Joan Walsh-Smith were quoted: “This ‘new incarnation’ will be a much more significant memorial than the original, and much more accessible to the public,” they said. “We have set the golden stockade post/poles in a graphically precise angle to each other, which both leads the eye to the dog and the pike, while, at the same time, creating a sense of controlled visual ‘unease’. Essentially, the impression is one of ‘controlled collapse’ while suggestive of purpose and final victory.”The memorial is of historic and aesthetic significance to the people of BallaratA small bronze dog surrounded by gold-coloured metal polespikemans dog, eureka stockade

A grand cement rendered masonry structure of a single central arch flanked by wide piers 20metres in width, spanning the roadway, and 18 metres high. Crowned by the 'Rising Sun' symbol of the Australian Commonwealth Military Forces beneath which the words Avenue of Honour and Victory are written prominently across the arch. Erected in 1920, the Arch marks the beginning of s 22 kilometre stretch of 3728 trees, each one a memorial to men and women in order of enlistment for World War 1. On 2 June 1920, the Prince of Wales opened the Arch and was presented with a pair of silk pyjamas embroidered with Australian emblems. Each of the 500 'Lucas Girls' had put in a stich. The Arch of Victory, located at the entrance to the Avenue of Honour Ballarat, was erected in 1920 as a memorial to the people of the Ballarat and the surrounding district who enlisted in World War I. The Avenue of Honour, with the Arch of Victory, was officially opened by the Prince of Wales on 3rd June 1920. The single central arch is flanked by wide piers 20 metres in width, spanning the roadway, and 18metres high. The monument is of historical significance to the people of BallaratCement rendered masonry arch structureCrowned by the 'Rising Sun' symbol of the Australian Commonwealth Military Forces beneath which the words Avenue of Honour and Victory are written prominently across the arch.arch of victory, avenue of honour ballarat, australian commonwealth military forces, world war i, prince of wales, lucas girls

Boyd introduces a short series of talks on ABC 3LO, on the theme of preservation. Different prominent people from various fields talk about aspects of preservation - from native animals and the environment, to historic records of Australia's early history etc. Boyd poses questions about the typical Australian and international influences on the Australian character and lifestyle. This is talk number one.Typewritten, foolscap, 5 pagespreservation, robin boyd, manuscript, radio

The College Church congregation initially worshipped in Ormond College in 1891. In 1895 they purchased the site of the present building. A committee set out certain specifications (including the crown tower), and a competition for the best design was won by architect RA Lawson. The building, constructed by Lang Brothers of Parkville at a cost of 2,170 pounds, was opened in 1898. College Church remained the only parish church in Parkville until 1934. The outstanding element is the crown tower, a choice of the first minister, the Reverend Alexander Yule. It is a copy, albeit on a reduced scale, of King's College Chapel, Aberdeen University, of which Reverend Yule was a former student. This crown tower is the only example in Victoria and is possibly unique in Australia. The church is constructed of red brick and Oamaru sandstone with a steeply pitched slate roof and parapeted gables. Windows are in the Gothic pointed arch style. The interior of the Church has a fine timber ceiling with arch braces. There are a number of quality stained glass windows, the two largest being dedicated to Mungo Scott and his wife, Scott having been a benefactor of the Church. The late nineteenth century pipe organ was built by George Fincham and Son (Richmond), with Professor Franklin Peterson as consultant, and was completed in November 1903. In the 1940s College Church was internally re-ordered and this work was designed by prominent church architect, Louis Williams. The church became part of the Uniting Church in Australia in 1977, and ownership subsequently passed to Mar Thoma Syrian Church in 2008. From The Argus, Friday 19 April 1907: Rev. Alexander Yule washeld in highest esteem in his ministerialbrethren and a large circle of friends was abundanrly evident by the expressions ofsorrowful regret at his death and of sympathy with his widow and her three sonsby those who attended the funeral servicesyesterday morning. To most of those present the announcement of Mr. Yule's death, made in "The Argus" on Wednesday, came as a painful surprise. It was known that at the time of his ministerial jubilee last January he shown symptoms of failing health, and that his illness had gradually become more serious, but few among the intimate friends of the family thought the end was so near. Although Mr. Yule suffered much physical weakness, his mental faculties were unimpaired, and he was able to carry on his ministerial work almost to the last. He even conducted the services at the College Church, Parkville, on Sunday, March 31. Testimony is borne that his ministry was appreciated most highly by the important congregations, both in Scotland and Victoria, under his charge; that in the church courts he was a safe and wise counsellor; and that he did excellent service on various committees, and as the convenor of the Theological-hall committee, on which he was appointed by the General Assembly. The esteem in which he was regarded by the Presbyterian Church as a whole was expressed in his election in 1891 to the Moderator's chair of the Victorian Church, and to that of the Federal Assembly in 1901. The funeral service was held at College Church, the scene of Mr. Yule's ministry since 1891. The building was filled to overflowing by a congregation that included most of the members of the metropolitan presbyteries, representatives from several of the provincial presbyterues, the students of the Theological-hall, members of the Parkville congregation, and the children of Miss Sutherland's Home. The pulpit and furniture were draped in black, and the plain oak coffin rested on the communion-table. The simple yet impressive service usual with the Presbyterian Church was conducted by Professor Rentoul, president of the Theological-hall Senatus, who was assisted by Professor Skene, Rev. W. Fraser (moderator of the Melbourne North Presbytery), Rev. D. S. McEacharn, and the Rev. John Thomson, a life-long friend of the departed minister. The Dead March in "Saul" was played on the organ as the coffin was borne to the hearse. The procession along Parkville-crescent to the cemetery gates was a notable one, and in the following order:—Theological-hall students; the hearse; the chief mourners—Dr. Yule, Rev. A. Yule, Mr. James Yule, and Mr. Groom, M.H.R., a relative of the family; the Theological-hall professors and committee; members of the presbyteries; and other friends, making a large and repre-sentative gathering. At the grave Professor Rentoul, Rev. Dr. Meiklejohn, Rev. D. Ross, and the Rev. Dr. Marshall officiated. The pall-bearers were Revs. D. S. McEachran, J. Thomson, A. McDonald, R. J. Smith,Mr. P. McLennan and Mr. L. E. Groom, M.H.R. The funeral arrangement were in the hands of Mr. Josiah Holdsworth.Portion of photocopy of the church and two of the portraits.college church, presbyterian church, yule, rev. alexander