Showing 661 items
matching st. kilda house
-
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, MacIntosh, 1950
... St Kilda Road Melbourne melbourne Object belonged ...Object belonged to and was used by Dr Lennard Travers 1950-1970.Complete Macintosh laryngoscope piece with a curved medium sized attached blade with light bulb and a textured handle with serrated grip for easy of use and a screw in the blade connector. The handle is also a battery deposit to supply the led light bulb. The blade has general deep scratches on its surface and a slight metal deformation on top back of the blade. At the back of the blade is still attached the hinge that keeps in regular position the base and the blade, is also present a worn surface in this area. Green spots of dust and oxidation processes are present over the blade and the handle areas. A handle manufacturer stamp is located at the base of handle (see inscriptions for details).Stamped into base of handle: LONGWORTH INST. CO. / OXFORD / ENGLANDmacintosh, laryngoscope, blade, handle, longworth inst. co., england -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope, Macintosh
... St Kilda Road Melbourne melbourne airway laryngoscope alfred ...Curved MAC (Macintosh) HEINE laryngoscope blade with light bulb, size 4. Made in Germany with stainless steel materials. Minor scratches and hit surface marks are around the piece, mostly near the base of the blade. Connector point located at the base of the blade is slightly worn out. Stamped on the base of the blade back edge side, HEINE / STAINLESS / W.-GERMANY Stamped at the lateral back side of the blade, MAC 4airway, laryngoscope, alfred hospital, melbourne, mac 4 heine, heine, blade, ball, christine -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope, Macintosh
... St Kilda Road Melbourne melbourne PENLON Macintosh Straight ...Semi straight infant Macintosh blade with light bulb only. The item has a general good conservation and completeness regarding its hinge piece and base bulb connector. It has stamped the manufacturer name (PENLON) and the place where it was made (New Zealand).Stamped, REGD TRADE MARK / PENLON / MADE IN NEW ZEALANDpenlon, macintosh, straight laryngoscope, infant, blade, laryngoscope, new zealand -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope, Soper, circa 1947
... St Kilda Road Melbourne melbourne soper blade laryngoscope ...A Soper adult size laryngoscope blade with bulb only. The item has several deep scratches over the surface and below of the blade. Oxide spots are present over the blade surface. The top surface of the blade is slightly bended. The end of the blade has a perforated line. On the base of blade is etched the word 'Whittam'.Engraved twice on the base of the blade, Whittam / Whittamsoper, blade, laryngoscope, adult, light bulb -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope, Soper, circa 1947
... St Kilda Road Melbourne melbourne soper laryngoscope blade ...A Soper straight laryngoscope blade adult size with bulb only. The blade has minor scratches over its surface and below the arm's blade because of its use. Presence of an old sticky tape mark under the blade. The contact stud at the base of the blade is worn. The end of the blade has a perforated line as part of its design. The metallic base of the light bulb has an oxide spot on it. No inscriptions. No inscriptionssoper, laryngoscope, blade, adult, light bulb -
Geoffrey Kaye Museum of Anaesthetic History
Tongue Depressor, Boyle-Davis Gag
... St Kilda Road Melbourne melbourne boyle-davis tongue ...Chrome plated metal "L" shaped tongue depressor. The depressor arm downside has cross-hatched grooves to facilitate adherence to the tong. A small metal tube is attached to the upper-side of the depressor through which anaesthesia or oxygen could be administered. The lateral arm handle has grips engraved to attach the mouth gag frame which is missing. This item has a stamp inscription on its handle about maker's details, size and material. Black spots of dust are present inside the metal tube and out near the extreme of the tube. It has accumulated dust between the cross-hatched grooves. Minor scratches around the piece.Stamped in the depressor handle, D.H.A. / 6 / STAINLESSboyle-davis, tongue depressor, airway management -
Geoffrey Kaye Museum of Anaesthetic History
Tonsil Guillotine, Sluder, circa 1911
... St Kilda Road Melbourne melbourne New instruments were ...New instruments were created using as archetype Physick´s tonsilotome model. Fahnestock, in the United States, 1832, Mackenzie in London, 1880, Brunings in 1908 and Sluder in 1911 in the United "States developed similar equipment. Greenfield Sluder, an ENT doctor, in Saint Louis was not the first to use the guillotine-cutter for tonsillectomy, but he published a study, in 1912, in which he affirmed to have reached 99.6% of success in his surgeries through this technique (1,2). They all aimed to accomplish surgery as fast as they could, especially in children, for the account of the lack of anesthetic techniques." Retrieved from URL: http://www.internationalarchivesent.org/additional/acervo_eng.asp?id=395 Sluder's Tonsil Guillotine large size. This metal piece of tonsillectomy equipment was designed by Greenfield Sluder in 1911. The piece has generalised oxidation spots on its surface but mostly founded over the top retractile arm blade holder and handle, also has sulphated areas at the base of the handle surface with a bluish colouration. This piece has a screw attached on top of the arm as part of the adjustable blade retractile system.sluder, greenfield, tonsil, guillotine, tonsillectomy -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, Flagg, circa 1915
... St Kilda Road Melbourne melbourne Designed by Dr Paluel Flagg ...Designed by Dr Paluel Flagg around 1915 and later used for 25 years. This laryngoscope blade was designed to meet certain expectations about laryngeal richness and to avoid major tracheal injuries in patients. (Ball, 2014) Article reference: C. M. Ball & R. N. Westhorpe. 2014. Anaesthesia & Intensive Care. Nov 2014, Vol. 42 Issue 6, p687-688. 2p.Complete laryngoscope used by Dr Lennard Travers. Medium sized Flagg straight blade with a slight curve at the distal end and a 'U' shape canal. The handle has a serrated grip for easy use and it is also a container for two batteries, it has a switch on its base. The full piece has visible and deep scratches over the top of blade around the stamped blade type inscription. The base of the blade has a worn surface with a slight discolouration due its use. No presence of led light bulb on blade. Minor scratches on handle base battery deposit with an ON - OFF switch black button. Stamped on blade, FLAGG LARYNGOSCOPE Stamped on top handle blade base, AUBURN, [W/A seal], N.Y.U.S.A. Stamped on the handle base power source button, ON [red colour], OFF [blue colour]flagg, laryngoscope, flagg blade, button, battery handle, straight blade -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope, Flagg, circa 1915
... St Kilda Road Melbourne melbourne Designed by Dr Paluel Flagg ...Designed by Dr Paluel Flagg around 1915 and later used for 25 years. This laryngoscope blade was designed to meet certain expectations about laryngeal richness and to avoid major tracheal injuries in patients. (Ball, 2014) Article reference: C. M. Ball & R. N. Westhorpe. 2014. Anaesthesia & Intensive Care. Nov 2014, Vol. 42 Issue 6, p687-688. 2p.Small sized Flagg straight blade with a slight curve at the distal end and a 'U' shape canal with light bulb attached. The piece has a general excellent condition and brightness over its surface. The laryngoscope blade type is stamped on top of the blade and the manufacturer seal is located at the base back side of the blade. Stamped on top of the blade, FLAGG LARYNGOSCOPE Stamped seal at the base back side, W/A [inside a triangle shape]flagg, light bulb, straight blade, welch allyn company (wa) -
Geoffrey Kaye Museum of Anaesthetic History
Handle, Flagg, circa 1915
... St Kilda Road Melbourne melbourne Designed by Dr Paluel Flagg ...Designed by Dr Paluel Flagg around 1915 and later used for 25 years. This laryngoscope was designed to meet certain expectations about laryngeal access and to avoid major tracheal injuries in patients (Ball, 2014). Article reference: C. M. Ball & R. N. Westhorpe. 2014. Anaesthesia & Intensive Care. Nov 2014, Vol. 42 Issue 6, p687-688. 2p.Flagg laryngoscope handle only. The handle has a serrated grip for easy use; it is also a container for two batteries and has a switch on its base with an ON - OFF switch black button which quite rusty. The handle has a screw on top of it, used to secure the blade. The full piece has minor scratches over its surface. It has a small crack in the switch area and a missing screw bellows it. The handle has an inscription about the manufacturer company seal and name stamped at the top of the handle ring.Stamped on top handle blade base, AUBURN, [W/A seal], N.Y.U.S.A. Stamped on the handle base power source button, ON [red colour], OFF [blue colour]flagg, handle, switch, laryngoscope -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope, Macintosh, Circa 1943
... St Kilda Road Melbourne melbourne "First described ..."First described by professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969. Macintosh semi curved blade designed in a baby size, with an unfitted light bulb attached. Minor scratches and some slight hit marks over the piece surface caused by its previous use. It has the manufacturer name and the place where it was made along with the owner’s name engraved at the back of the blade. Engraved at the back of the blade near light bulb the owner details: R.C.H. / O.P.T. Stamped at the back blade base into metal the manufacturer's name and place: Longworth / MADE IN ENGLAND Stamped on light bulb base serrated surface, HEINE XHL / #059 2,5v paediatric blades, royal children's hospital, macintosh, light bulb, longworth, blade, laryngoscope -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope, Macintosh, Model Circa 1943
... St Kilda Road Melbourne melbourne The design of this item ...The design of this item is associated to what was "first described by Professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969. The manufacturer of this blade is the Boots UK Limited pharmacy company, they apparently had a branch in Australia to distribute their medical and pharmaceutical equipment and part of them was focused on the manufacturing of laryngoscopes blades. The Boots company reproduced this trending design used in the anaesthetic practice. URL Reference: https://en.wikipedia.org/wiki/Boots_UK / https://en.wikipedia.org/wiki/Alliance_Boots Macintosh semi curved blade designed in a baby size, without light bulb attached. Minor scratches and some slight hit marks over the piece surface caused by its previous use. It has the manufacturer name and brand and the place where it was made at the back of the blade base.Stamped at the blade back base area, BOOTS AUSTRALIA / MADE IN ENGLANDmacintosh, blade, boots australia, boots uk limited, england blade -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope, Macintosh, Circa 1943
... St Kilda Road Melbourne melbourne "First described ..."First described by professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969. Macintosh semi curved blade designed in a child size, with a light bulb attached. Minor scratches and some slight hit marks over the piece surface caused by its previous use. It has stamped the manufacturer name and the place where it was made at the back of the blade.Stamped on the back blade base, Longworth / MADE IN ENGLANDmacintosh, blade, longworth, paediatrics, light bulb -
Geoffrey Kaye Museum of Anaesthetic History
Kit, Snake bite, Felton Grimwade & Co
... St Kilda Road Melbourne melbourne Prior to the first ...Prior to the first antivenom development in Australia, many of the snake men had a vast array of snakebite remedies they either used for themselves in the case of bites or pedaled to the public. Treatments such as ammonia, strychnine, chlorinated lime, potassium permanganate, suction caps, alcohol, gunpowder, petrol, toad urine, iodide swabs and pig face plant juice were some that were used and sold. The first antivenom produced in Australia was in 1930 for tiger snake bites. Subsequently, in response to public pressure, other antivenoms were produced. Taipan, 1955; Brown snake, 1956; Death Adder, 1958; Papuan black snake, 1959; Sea snake, 1961; and the polyvalent, 1962.Black box with hinged opening and gold leaf printed text on the top. Inside the box is lined with blue satin and velvet, and contains one (1) syringe with glass chamber and metal plunger and black rubber stopper, one (1) glass bottle with a label stating it contains chloride of lime, one (1) glass bottle with a label stating it contains pure alcohol and two (2) needles with metal connectors, one of which is broken. There is also a small wooden block with a groove in the top of it.Gold lettering on top of box: CHLORIDE OF LIME ANTIDOTE / FOR / SNAKE BITE / FELTON GRIMWADE & CO. / MELBOURNE.hydrochloride lime, alcohol, antidote, venom, snake bite -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope, Macintosh, circa 1943
... St Kilda Road Melbourne melbourne "First described ..."First described by professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969.Macintosh semi curved blade designed in a child size, with a light bulb attached to the blade and a hinge attached to the back side of the base. Several scratches and deep hit marks over its surface caused by its previous use. This piece also has visible old dust spots and stains. Its contact stud is in a well condition and does not has any inscriptions. macintosh, blade, paediatrics, light bulb -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, Macintosh, Circa 1943
... St Kilda Road Melbourne melbourne "First described ..."First described by Professor R. R. Macintosh in the Lancet of February 13th, 1943, this design is now the acknowledged leader throughout the world." (PENLON, 1969) Reference: PENLON. 1969. Anaesthetic Equipment - Longworth Scientific Instrument Company LTD. Abingdon, Berkshire, England. January 1969.Right hand stainless steel size 3 Macintosh interchangeable laryngoscope blade with light bulb, attached to a standard sized handle with serrated grip and no batteries inside deposit. Minor scratches and hit marks are over its surface. A blue sticky tape is attached to the back side of the blade where the size and type is, also can be found the mark left by a previous sticky tape around the top neck of the handle. The blade was made by Penlon in England.Engraved in cursive writing above the light bulb, Royal Childrens Hospital Engraved in capital writing above the light bulb next to previous text, D.A. Stamped at the back side of the blade, MACINTOSH / 3 Stamped at the blade base lateral side, REGD. TRADE MARK / PENLON / MADE IN ENGLAND Stamped at the blade back side, STAINLESSlaryngoscope, macintosh laryngoscope, macintosh blade, light bulb -
Geoffrey Kaye Museum of Anaesthetic History
Handle, Laryngoscope, Longworth fitting
... St Kilda Road Melbourne melbourne This object was displayed ...This object was displayed as part of the temporary Mask-Inhaler Exhibition during the Geoffrey Kaye Symposium, 29-30 January 2013.Laryngoscope penlite handle for infant Longworth fitting blades use, with a serrated grip on battery deposit, no batteries included. Top handle fitting screw is present. Minor scratches and hit marks are present over its surface. It has stamped the trade mark and place of manufacturing.Stamped on the top handle attachment place, REGD TRADE MARK / PENLON / [M] ADE IN ENGLANDhandle, penlon, longworth fitting handles, infant size handle -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope, Magill, circa 1943
... St Kilda Road Melbourne melbourne longworth magill blade ...Magill type blade to fit Longworth handles adult size without light bulb. Attached hinge at the back of the blade. Visible hit marks mostly present at the back top of the blade and below. Worn contact stud on base and lateral side at the light bulb connection. Dust spots around the piece. It has stamped on the blade base the attachment type name.Stamped at the attachment base of the blade in cursive writing, Longworthlongworth, magill, blade, adult blades, penlon -
Geoffrey Kaye Museum of Anaesthetic History
Blade, Laryngoscope, Magill, Circa 1943
... St Kilda Road Melbourne melbourne “Penlon was founded ...“Penlon was founded as Longworth Scientific Instrument Co. Ltd, in 1943, in Oxford, by personnel from the Department of Anaesthetics at Oxford University.” (Ref. Retrieved from URL 2015: http://www.penlon.com/en/us/about/history.html ) Magill type blade to fit Longworth handles adult size without light bulb and without hinge at the back of the blade. Visible dust veil over its surface with presence of small oxidation spots mostly over the blade canal and base. Almost non used contact studs on base and lateral side at the light bulb connection. It has stamped on the blade base the fitting type name and the place where it was made.Stamped at the fitting base of the blade in cursive writing, Longworth Stamped at the fitting base of the base in capital writing below the previous text, MADE [I]N ENGLAN[D] longworth, magill, blade, adult blades, penlon -
Geoffrey Kaye Museum of Anaesthetic History
Tongue Depressor
... St Kilda Road Melbourne melbourne tongue depressor medical ...J. Austen chrome plated tongue depressor blade only. Size 2 1/4, stainless steel material. The top arm of the instrument has a serrated grip below to facilitate tongue adherence, also has a middle space canal with semi circular welded rings to possibly introduce or attach an anaesthetic tube. This piece has in its internal lateral side engraved the possible owner's initial and last name. Minor scratches and dust marks are present over the piece as well as oxidation spots around engraved name. Weld spots in metallic semi circles edges on top of the piece.Engraved at the internal side of the handle, V. BRAND Stamped at the external side of the handle, J.AUSTEN / 2 1/4 / STAINLESStongue depressor, medical instruments, airway instruments, j. austen -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, Lynah, Circa 1915
... St Kilda Road Melbourne melbourne Laryngeal Speculum ...Lynah's Ovoid Laryngeal Speculum with the light bulb and part of the connection wires still attached. Its semi square shape is characteristic of this kind of instrument, also has an screwable pointed end attachment. It has dusty and grey spots inside the canal of the blade near the light bulb canal. Solder spots are visible at the top of the blade as attachment of the laryngeal speculum blade base. General discolouration over the surface of this piece and hit marks present at the base of the handle. It was roughly engraved over the handle the owner’s details and year. Stamped at the base of the handle are the manufacturer’s details partially visible. Engraved at the handle, U N N A M E T . A D E L A I D E . c. 194[6] . Stamped at the base of the handle, [first line worn away might be MADE BY] / E / A D / [might be an S] YDN [might be an EY] / CHROME PLAT [incomplete word due stamp near the edge]laryngeal speculum, laryngeal instruments, unnamet, adelaide, lynah, henry lowndes -
Geoffrey Kaye Museum of Anaesthetic History
Resuscitator, Ambu, c.1961
... St Kilda Road Melbourne melbourne In 1937, the engineer ...In 1937, the engineer Holger Hesse founded Testa Laboratory, which later became Ambu. Hesse developed products that made a difference to patients and doctors. The real breakthrough came in 1956 when the Ambu ventilation bag reached the market, developed together with anaesthetist Henning Ruben. It was the world’s first self-inflating resuscitator and a major milestone in emergency medical equipment. The Ambu bag became a permanent part of hospital and emergency services product ranges. Brown rubber bag with a round metal filter at one end and a connector tube at the other. There is a blue plastic connector between the rubber bag and the metal tube.Moulded into blue plastic connector: AMBU-INTERNATIONAL / Ruben-Resuscitator Stamped into filter: Ambu logo - large capital A with AUER inside the legs of the Aambu, ruben, self-inflating, resuscitator, emergency, henning, ruben -
Geoffrey Kaye Museum of Anaesthetic History
Tongue depressor, Lack
... St Kilda Road Melbourne melbourne Tongue Depressor Lack's ...Lack model metallic tongue depressor. General deterioration over its surface with presence of scratches, worn surfaces mostly at the edges of the piece, oxidation spots and resin plasters around the handle base with dust and fabric fibers glued to it. It has a serrated surface bellow the blade to facilitate tongue adherence. It has an adult medium size. No inscriptions or further details are present to determine manufacturer or owner.tongue depressor, lack's tongue depressor -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, Magill, c 1900
... St Kilda Road Melbourne melbourne magill, ivan laryngoscope ...Magill's laryngoscope with open straight blade and flat round speculum and a detachable light bulb connector, the bulb is missing. This laryngoscope is a previous version of the battery use ones conceived around 1920 therefore circa 1900. The design of the handle is similar to the Shipway laryngoscopes with a curved and pointed end and anatomical handle grip. The blade attachment place seems to be an adaptation to this kind of blade which differs from original models. The piece has several scratches and deep hit marks, as well as oxidation spots mostly around the internal canal of the blade. There is presence of resin residues on some surfaces. A visible different kind of metal was used at the blade base attachment place and for the light bulb connector. Engraved on handle its model type and in the arm of the handle a possible manufacturer name (illegible) and the place where it was made.Engraved at the handle, MAGILL'S LARYNGOSCOPE. Stamped at the arm of the handle back side, STAINLESS STEEL Stamped at the arm of the handle front side, A[not understandable text might be Allen & Hanburys Ltd.] / LONDON / JZmagill, ivan, laryngoscope, 1900, resin, shipway, light bulb, magill laryngoscope -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, Shipway, c 1920
... St Kilda Road Melbourne melbourne Shipway Laryngoscope ...Shipway’s metallic medium size laryngoscope with bulbous curved handle. The section connecting the handle to the straight blade has a screw. Lateral orifice to attached light bulb connection which is not present on this item. The surface is very rusty and quite battered, presence of oxidation on its surface and discoloration of the metal. Has an inscription about the manufacturer.Stamped on its handle, MAYER & Co. LONDONshipway laryngoscope, laryngoscope, metal, mayer & co. london -
Geoffrey Kaye Museum of Anaesthetic History
Mask, Schimmelbusch, Elliott, c. 1930s
... St Kilda Road Melbourne melbourne Curt Theodor Schimmelbusch ...Curt Theodor Schimmelbusch (November 16, 1860 – August 2, 1895) was a German physician and pathologist who invented the Schimmelbusch mask, for the safe delivery of anaesthetics to surgical patients. In 1890, Schimmelbusch invented a mask for the delivery of anaesthetics to surgical patients. It was primarily designed for ether anaesthesia, but he also proposed its use for chloroform anaesthesia. Schimmelbusch designed a metal mask, over which a gauze could be stretched and secured. The mask was placed over the patient's mouth and nose, and anaesthetic was applied to the gauze, allowing the patient to inhale the anaesthetic as they breathed normally. Around the edge of the mask, a trough collected the residual anaesthetic, rather than allowing it to drip onto the patient's face.Oval shaped metal mask with a collapsible cross-shaped dome, hinged clamp and flat handleStamped into underside of handle: ELLIOTT SYDNEYschimmelbusch, mask, open method, chloroform, ether, german, physician, pathologist -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, Magill, 1926
... St Kilda Road Melbourne melbourne Ivan Magill (1888-1986 ...Ivan Magill (1888-1986) designer, this piece was designed in 1926 along with other anaesthetic equipment.Chrome plated straight complete Magill laryngoscope in medium size format, with attached light bulb. Cylindrical handle for battery deposit and with a wavy hand grip for easy handling. Serrated and screwed lids on top and base of the handle grip for insertion of batteries and checking of electrical contact stud. The handle also has a metallic switch without any instruction of use. The arm of the handle has a detachable screw to adjust extendable blade position and firmness. The light bulb is attached to a metallic tube connector to the handle arm which is just pressed to the contact point base. The blade has a oxidation spot under the blade. The piece in full has several scratches marks mostly founded in handle, arm and top blade areas. Two stamped inscriptions are present on the arm area, the manufacturer name and register number.Stamped on the arm of the handle lateral side, A.CHARLES KING Stamped on the arm of the handle opposite lateral side, REG. NO. 74901[9]magill, a. charles king ltd, regi. no. 749019, switch, laryngoscope -
Geoffrey Kaye Museum of Anaesthetic History
Laryngoscope, Chevalier Jackson, Circa 1913
... St Kilda Road Melbourne melbourne Please refer to The Wood ...Please refer to The Wood Library for further information about this piece. URL: https://www.woodlibrarymuseum.org/museum/item/664/jackson-laryngoscope Chevalier Jackson direct laryngoscope, with attached small light bulb inside the internal blade. Brass coated piece with a large size. This piece has a discoloured and beaten surface with visible hit marks, deformation at the back of the blade and green spots in handle area. The hand anatomic handle is faceted and designed with a thumb rest section at the angle. Welding sections are visible along the blade base external canal and handle attachment area. No inscriptions.Anychevalier jackson, laryngoscope, light bulb, brass -
Geoffrey Kaye Museum of Anaesthetic History
Inhaler, Clover, Mayer & Meltzer, 1877
... St Kilda Road Melbourne melbourne Dr. Joseph Clover (1825 ...Dr. Joseph Clover (1825-1882), an English physician, first described his Portable Regulating Ether Inhaler on Jan. 20, 1877. Clover was an especially sought after anesthesiologist and early pioneer in the specialty. This was the best-known of many inhalers that Clover designed. The dome-shaped reservoir was turned to points on a control dial to gradually increase or decrease the percentage of the air that passed over the ether. Several inventors based new inhalers on this, while the original continued to be manufactured as late as the beginning of WWII. (Source: Wood Library Museum)Black round topped box with brass hooks at front and brass hinges at rear. There is a black fabric handle on the top. Inside the box is black padding with the manufacturer's logo printed in gold leaf. There is a square section in the base of the box for holding the square clear glass bottle for ether. There is also a dome-shaped metal inhaler with a "whistle tip" type connection to the mask. The mask is made of tan leather. There is also a metal ether measure for pouring the ether.Printed in gold leaf inside lid of box: MAYER & MELTZER [?] PORTLAND ST. / MAKERS •Engraved on side of inhaler: Mayer & Meltzer / London •Stamped on connector of inhaler: MAYER & MELTZER RN NO 212327 •Engraved on rear of inhaler: Clover's Inhaler •Printed in white on blue sticker: O.2.5A •Measurements have been stamped on the bottom of the inhaler. •Printed in black ink on mask: MADE IN ENGLAND •Stamped on metal connector inside mask: 6 •Printed in black ink on white manufacturer's label on glass bottle: ETHER PURUS '720 / H. Francis & Co., Melbourne.clover, joseph, mollison, crawford henry, george bankin, mccaul, kevin, royal women's hospital, coroner, freemason, surgeon, gynaecologist, obstetrician, mayer & meltzer, francis & co, melbourne, ether purus -
Geoffrey Kaye Museum of Anaesthetic History
Inhaler, Probyn Williams, Mayer & Meltzer, c. 1900
... St Kilda Road Melbourne melbourne Hurley, Sir Thomas Ernest ...Hurley, Sir Thomas Ernest Victor (1888-1958) was gifted this Probyn Williams inhaler in 1914. After studying at Melbourne University, Victorian-born Hurley was a Medical Officer at the Royal Melbourne Hospital until he commenced private practice in Collins Street. He was appointed Captain Australian Army Medical Corps, AIF and served in Gallipoli with the 2nd Field Ambulance. He served in Enypt, London, and the Western Front during World War 1. He gained a Companion of the Order of St George and St Michael in 1917. Upon return to Melbourne he held positions such as surgeon to Victoria Police (1928-1956), elected to Council of the Victorian branch of the British Medical Association, member of the Charities Board of Victoria and foundation member of the Royal Australasian College of Surgeons and chaired the Flying Personnel Research Committee m a consulting surgeon at the Royal Melbourne Hospital. This apparatus is transitional between Clover's and Hewitt's having Clover's narrow "ways" and compact size, but using Hewitt's ether-control lever.Black round topped box with brass hooks [missing] at front and brass hinges at rear. The initials T.E.V.H. are printed in gold leaf on the front. There is a black fabric handle on the top. Inside the box is black padding with the manufacturer's logo printed in gold leaf. There is a square section in the base of the box for holding the square clear glass bottle for ether. The pear-shaped mask is made of metal. There is also a metal ether measure for pouring the ether. The metal inhaler is ovoid shaped. The rotating gauge has a series of numbers engraved onto the inhaler for measurement. There is an elbow joint attaching a re-breather bag, with a small amount of waxy paper remaining attached with a thin ribbon. There is a small glass bulb encased in a metal housing. Printed in gold leaf on front of box: T.E.V.H. •Printed in gold leaf on inside lid of box: MAYER & MELTZER / LONDON / MELBOURNE & CAPE TOWN •Engraved on side of inhaler: PRESENTED / TO / T.E.V. Hurley Esq.,M.D.M.S. / by / THE M.S.S. / 15.6.14. •Engraved on reverse side of inhaler: PROBYN WILLIAMS / ETHER INHALER •Moulded into connector on elbow joint: MAYER & MELTZER •Stamped into base of metal pourer: MAYER & MELTZER / LONDON •Blue sticker with white printed text on front of inhaler: O.2.21.hurley, thomas ernest victor, probyn williams, university of melbourne, world war 1, wwi, gallipoli, australian army medical corps, medical student society, mayer & meltzer, clover, joseph, hewitt, fredrick william