Showing 781 items
matching bearing
-
Wodonga & District Historical Society Inc
Album - Hume Reservoir Australia Album - View along the face of the quarry, August 1927, 1927
This set of photos is from a leather bound album bearing the inscription "HUME RESERVOIR AUSTRALIA" plus 'The Rt. Hon. L. C. M. S. Amery, P. C., M .P.' all inscribed in gold. It was presented to The Rt. Hon. L. C. M. S. Amery, P. C., M. P, Secretary of State for Dominion Affairs on the occasion of his visit to the Hume Reservoir on 2nd November 1927. This album is of local and national significance as it documents the planning and development of the Hume Reservoir up to 1927. It was the largest water reservoir in the British Empire. The album records the pioneering engineering work that went into its construction.DEPARTMENT OF PUBLIC WORKS, N.S.W. RIVER MURRAY WATERS SCHEME. HUME RESERVOIR. 35. Quarry. View along the face of the quarry. Granite is being quarried here for the concrete material. Blocks from 2-8 tons in weight are reserved for “plums”. Quantities of large size spalls are sent to Victoria for the toe of the embankment and other purposes but the greatest proportion of the stone is crushed at the quarry to 2½ inches gauge for concrete aggregate. Two steam navvies and two steam travelling cranes are at work on the face. New South Wales. August 1927.hume reservoir australia, river murray waters scheme, hume reservoir construction -
Wodonga & District Historical Society Inc
Album - Hume Reservoir Australia Album - Valley of the Murray to be crossed by the Bethanga Bridge 1927
This set of photos is from a leather bound album bearing the inscription "HUME RESERVOIR AUSTRALIA" plus 'The Rt. Hon. L. C. M. S. Amery, P. C., M .P.' all inscribed in gold. It was presented to The Rt. Hon. L. C. M. S. Amery, P. C., M. P, Secretary of State for Dominion Affairs on the occasion of his visit to the Hume Reservoir on 2nd November 1927. This album is of local and national significance as it documents the planning and development of the Hume Reservoir up to 1927. It was the largest water reservoir in the British Empire. The album records the pioneering engineering work that went into its construction.DEPARTMENT OF PUBLIC WORKS, N.S.W. RIVER MURRAY WATERS SCHEME. HUME RESERVOIR. 36. Valley of the Murray to be crossed by the Bethanga Bridge described in the next photograph. (WHS 00731) This view shows the marshalling sidings for trucks below the Quarry, New South Wales, and the branch line to the site of the bridge.hume reservoir australia, river murray waters scheme, hume reservoir construction -
Wodonga & District Historical Society Inc
Album - Hume Reservoir Australia Album - Bethanga Bridge Site, August 1927
This set of photos is from a leather bound album bearing the inscription "HUME RESERVOIR AUSTRALIA" plus 'The Rt. Hon. L. C. M. S. Amery, P. C., M .P.' all inscribed in gold. It was presented to The Rt. Hon. L. C. M. S. Amery, P. C., M. P, Secretary of State for Dominion Affairs on the occasion of his visit to the Hume Reservoir on 2nd November 1927. This album is of local and national significance as it documents the planning and development of the Hume Reservoir up to 1927. It was the largest water reservoir in the British Empire. The album records the pioneering engineering work that went into its construction.DEPARTMENT OF PUBLIC WORKS, N.S.W. RIVER MURRAY WATERS SCHEME. HUME RESERVOIR. 37. Bethanga Bridge Site. A bridge is being built to cross the Reservoir to serve a large area of country which will be cut off from its natural outlets by the submergence of existing bridges when the Reservoir is in being. The site of the bridge is nearly a mile up the Murray from the Hume Reservoir Quarry. Its length will be approximately half a mile. There will be nine spans of 269 feet with steel truss girders resting on concrete pillars. Some of the pillars are founded on rock while others will rest on nests of reinforced concrete piles. The foundations and concrete piers are in the hands of the Victorian Constructing Authority and the superstructure in those of the New South Wales Authority. August 1927.hume reservoir australia, river murray waters scheme, hume reservoir construction -
Bendigo Military Museum
Uniform - BADGES, C.1939 - 45
Badges belonged to Thomas Henry ISER V24933 and VX102660 2nd AIF. Refer Cat No 383.2 for his service history..1,.2) Badge, "AUSTRALIA" shoulder, blackend brass with brass split pin. .3,.4) Crown shaped metal badge signifying rank of major with brass back plate holding maroon velvet, plush fabric, dark bronze with split pins. .5,.6 & 7) Badge, rank "pip" officer with brass split pins. central circle with three acorns surrounded by circle bearing motto, a third circle has a chain and this whole section is squared off with stylised leaves or feathers making a pointed edge"TRIA JUNGTA IN UNO" motto surrounding acorns in reliefnumismatics-badges-military, army uniform -
Flagstaff Hill Maritime Museum and Village
Bell, Before 1837
This remnant of a ships bell was recovered from the wreck site of the CHILDREN by Flagstaff Hill Divers on 1 October 1973. (Diving identification number S.M24/10-73, Accession number 24). The artefact had lain in the ocean off Childers Cove since the vessel’s disastrous sinking there on 15 January 1839. Other similarly high value metallic objects raised from the site, and now in the Flagstaff Hill collection, are the ship’s signal cannon (1963), and the ship’s anchor (1974). A ship’s bell was normally struck by the lookout at the foreward part of a vessel, following orders (“Strike the bell”) from the officer of the watch at the helm, or as a warning signal of danger ahead. Its main function was to keep the crew aware of time. Each 24 hour period was divided into 4 hour work-shifts, or watches, and each of these was divided into 8 half hours, or glasses (each half hour being determined by the time it took between each turn of the ship’s hourglass). The six watches were the first watch from 8pm to midnight, the second or middle watch from midnight to 4am, the third or morning watch from 4 to 8am, the fourth of forenoon watch from 8am to midday, the fifth or noon watch from midday to 4pm, and the sixth or dog watch from 4 to 8pm. Within each watch the first half hour would end with one bell, the second with two bells, the third with three bells, and so on until their work-shift ended with the ringing of eight bells. The CHILDREN left Launceston on 11 January 1839 and immediately struck heavy weather. By the evening of 15 January Captain Browne had been continuously on duty for 4 days and needed sleep, his First Mate (T. Gay) was incapacitated with seasickness, and the task of command was given to the Second Mate (W. Wentworth). At two bells into the first watch, or 9 o’clock that night, the captain went below. Two hours later, at six bells into the first watch, or 11 o’clock that night, the lookout cried “Breakers close ahead”. Within a minute the ship struck the rocks at the entrance of Childers Cove. Within twenty minutes the huge seas had taken her stern, three masts and much of her weatherside, leaving survivors clinging to the forecastle. Within two hours the wreck had completely disappeared. If anyone could have rung the bell by then, it would have been to strike two bells into the middle-watch, or one o’clock on the morning of 16 January. An 1859 Victorian Register of Wrecks from 1835 to 1858 remarks the CHILDREN “Ran ashore through an error in the reckoning and a bad lookout [and] Became a total wreck”. 22 passengers and crew survived the tragedy, but 16 lives were lost, including the captain and second mate, and 8 children. The shipwreck of the CHILDREN is of State significance ― Victorian Heritage Register S116A part of a brass ship’s bell, recovered from the wreck of the CHILDREN. The upper part, or dome of the bell, has corroded away, leaving the lower portion, or mouth of the bell, largely intact. However this lower surviving portion has been severed vertically with a clear (saw?) cut, leaving a regular 1cm gap down one side of the bell. It is an evocative relic, attractively aged on the seafloor, bearing layers of aqua-marine verdigris and white limestone accretion on a dull bronze surface. There is no visible ship’s name on the bell. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, the children, bell, ships bell, childers cove, henty brothers, james henty & co, sea-watches, nautical time, james henty & co, bell from the children -
Flagstaff Hill Maritime Museum and Village
Leisure object - Toy Soldier, circa 1878
The toy soldier is a relic from the shipwreck of the LOCH ARD in 1878. It has a companion piece in the Flagstaff Hill collection. The toy soldier is unpainted, but the style of uniform, and the weapons carried (a musket and a basket-handled cutlass), indicate it is a representation of the Napoleonic Wars period from the beginning of the nineteenth century. Mass-produced toy soldiers made of cast metal (lead or tin) became popular during the 1800s. Heyde of Germany manufactured silhouette-shaped ‘flats’ early in the century; then Mignot of France released three-dimensional ‘solids’; and later (1893) Britain of England made ‘hollow cast’ figures. These innovations were designed to make sets of toy soldiers more affordable for middle and lower-class children, extending the market beyond the intricately made and hand-crafted replicas that were the preserve of the rich in the eighteenth century. Wooden military figures, specially carved and unpainted ones, were therefore not particularly common at the time when the LOCH ARD went down on Victoria’s southwest coast. Mignot was the first to sell unpainted soldiers, leaving their customers to fill in the colours according to their own patriotic preferences. If a similar attitude is assumed for the two virtually identical figures in the Flagstaff Hill collection, it is possible they were part of a new set intended for sale, rather than part of a passenger’s existing collection. A similarly light composite material of sawdust, glue and linseed oil (press-moulded onto a metal frame) was used by the German firm O & M Hausler to create toy soldiers, but this type of modelling was not commercialised until after 1912. The first heat-moulded plastic toy soldiers did not become available until after 1945.The toy soldier represents a 19th century child's interest in military history. The item is one of two toy soldiers recovered from the Loch Ard that are in Flagstaff Hill's collection. The shipwreck of the Loch Ard is of significance for Victoria and is registered on the Victorian Heritage Register ( S 417). Flagstaff Hill has a varied collection of artefacts from Loch Ard and its collection is significant for being one of the largest accumulation of artefacts from this notable Victorian shipwreck of which the subject items are a small part. The collections objects give us a snapshot of how we can interpret the story of this tragic event. The collection is also archaeologically significant as it represents aspects of Victoria's shipping history that allows us to interpret Victoria's social and historical themes of the time. Through is associated with the worst and best-known shipwreck in Victoria's history.An unpainted replica or toy soldier, presented in a Napoleonic Wars era uniform. The moulded figure is in a standing posture and is bearing a musket at the slope-arms position, with a sabre or cutlass slung behind. It wears a plumed helmet, short-fronted coat with longer buttoned tails at the back, button-fastened bib-front trousers, a pair of crossed bandoliers, and tasselled shoulder epaulettes. The figure is a creamy colour with red-brown stains on the head and shoulder. There is a hole in the end of the musket. The model is detailed and sharp. It was recovered from the wreck of the Loch Ard.Cataloguing numbers: “6599” on the rear of the left trouser leg “PWO 2308” on the sole of the left boot, (partially obscuring “R122” written in biro) “2218” on the sole of the right boot.flagstaff hill, warrnambool, loch ard, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, loch line, napoleonic uniform, toy soldier, replica soldier -
Ballarat Tramway Museum
Book, Jack Cranston, "The Goldfields of Ballarat 1851 - 1886 and The Eureka Stockade", 1970's?
Book - "The Goldfields of Ballarat 1851 - 1886 and The Eureka Stockade", compiled by Jack Cranston. Comprises blue cover with 28 pages folded and stapled inside and fold out map glued to the inside of the rear cover, "Map of Ballaarat and Sebastopol" showing the various leads and gold bearing reefs of the goldfields. Also shows the location of Eureka Stockade and Sovereign Hill. Published for the Sovereign Hill Association, 1970's? Looks at the Goldfields, sources of Nuggets, mining population and statistics, the Miners Rebellion and the Stockade. Has numerous illustrations and copies of posters.trams, tramways, gold, eureka, sovereign hill -
University of Melbourne, Burnley Campus Archives
Newspaper - Newspaper Cutting, The Leader, The School of Horticulture, 1899
Photocopy of article in "The Leader," February 18, 1899 about the introduction of female students. Includes illustrations from 'The School of Horticulture, Burnley' (1) View of the Grounds. (2) Instructing a Class. (3) A Group of Students. The Principal, Mr C. Bogue Luffman. Original of article without photographs. Another photocopy version, same date - Page of photographs: Group of Ladies, The Principal's House, A Lesson in Budding, Mrs Luffmann, Specimen Dwarf Apple Tree in Full-Bearing, Sorting Prunes, Mr C Luffmann Principalthe leader, female students, charles bogue luffman, school of hortriculture, mrs luffmann, mr c luffmann, principal, prunes, budding, outside classes, principal's residence, apple tree -
Glenelg Shire Council Cultural Collection
Drawing - Drawing, Botanical, Collin Elwyn Woolcock, Dillwynia Sericea (Showy Parrot-Pea), n.d
Part of 'Woolcock Gallery Collection' Exhibited CEMA 1989.View of flowering plant with stem and flower details. On left is a view of stem with three smaller stems bearing long, thin green leaves and ending in clusters of pea flowers (apricot in colour). On right (t-b): stem detail with leaves; end view of leaf depicting curve; top view of flower; side view; rear view. All views are numbered in pencil and typed numbers on paper affixed to surface of paper. Mounted in double matt (white on apricot), framed under glass in wooden frame with gold detail.Front: CEW (signature, lower left in image) (maroon pencil). Dillwynia sericea (lower right) (pencil). Back: 39 (upper let) (pen)collin woolcock, botanical, woolcock collection, cema, botanical drawings -
Wannon Water
Cast iron seal embossing press, Excello, Seal
Heywood Waterworks Trust was constituted on 20 November 1962 upon application by Councillors of the Shire of Portland to construct, manage and maintain the works for the supply of water to the township of Heywood. The Trust was abolished on 1 July 1984 under the Water and Sewerage (Restructuring) Act 1983 when it amalgamated with the Heywood Sewerage Authority to form Heywood Water BoardA cast iron seal press, . This was used by Heywood Waterworks Trust to emboss agreements and official documents. Die is still attached to the press. It reads: Heywood Waterworks Trust 1963Small metal machine painted black and mounted onto a black rubber base. Two dies are attached with the seal of Heywood Waterworks Trust. Paper is placed between the dies, the handle depressed and the seal embossed on the paper under pressure as a blind (inkless) embossing. The seal consists of two circles with the wording "Heywood Waterworks Trust".Heywood Waterworks Trust 1963/ Excello / Reg Trade Mark/ Seal Press/ Pat NO 420419/Size No 2/Inscription on rubber base: "EXCELLO SEAL PRESS" / REGD TRADE MARK / 1. PATENT ROLLER BEARING HANDLE PAT. NO. 420419 / 2. DURABLE PLASTIC COUNTER / 3. RUBBER DESK PROTECTOR / STANDARD RUBBER TYPE CO. LTD. / TOKYO JAPAN"heywood, public administration, water supply, amalgamations -
Vision Australia
Document - Text, Merle Reid Album, 1985
In March 1985, Merle Reid past away. She had worked for RVIB at Burwood since 1963, first as a cleaner but later as a laundry supervisor and childcare assistant. Encouraged by Matron Dunnell, she began her teacher qualifications and went on to become a teacher at the school. With her positive outlook, she became a firm favourite with children and staff alike, and to honour her impact, a proposal was made for a new outdoor playground was made bearing her name.Album of images and text as a tribute to Merle Reidrvib burwood school, merle reid -
Dandenong/Cranbourne RSL Sub Branch
Large Book, "The Changing of the Guard"
Large Green Leather covered book with Gold Australian Coat of Arms on front.Reproduced from Official and other photographs of the two World Wars. Published under the auspices of the Board of Management of the Australian War Memorial. Contains Dedication - To the men and women of the Empire who in every hour of danger , face the storm … who in their willing sacrifice are bearing the brunt of a struggle for the peace and security of all peoples. Faint stamp "Maurice Parker" inside front cover top left. -
Kew Historical Society Inc
Photograph, Anglo-Australasian Photographic Company, Cumberland Creek, near Point Sturt, c. 1876
Nicholas Caire was born on Guernsey in the Channel Islands in 1837. He arrived in Adelaide with his parents in about 1860. In 1867, following photographic journeys in Gippsland, he opened a studio in Adelaide. From 1870 to 1876 he lived and worked in Talbot in Central Victoria. In 1876 he purchased T. F. Chuck's studios in the Royal Arcade Melbourne. In 1885, following the introduction of dry plate photography, he began a series of landscape series, which were commercially successful. As a photographer, he travelled extensively through Victoria, photographing places few of his contemporaries had previously seen. He died in 1918. Reference: Jack Cato, 'Caire, Nicholas John (1837–1918)', Australian Dictionary of Biography.An original, rare photograph from the series 'Views of Victoria: General Series' by the photographer, Nicholas Caire (1837-1918). The 60 photographs that comprise the series were issued c. 1876 and reinforced a neo-Romantic view of the Australian landscape to which a growing nationalist movement would respond. Nicholas Caire was active as a photographer in Australia from 1858 until his death in 1918. His vision of the Australian bush and pioneer life had a counterpart in the works of Henry Lawson and other nationalist poets, authors and painters.‘Cumberland Creek, near Point Sturt’ : Views of Victoria (General Series) No.59 : Albumen silver photograph | Photo on card with Title and Description on reverse | Mounted 24 x 30 cm; Photo 12 x 17 cm.On Reverse: ‘The Cumberland Creek is so named from the close resemblance it bears to the place bearing that name in the mother country. The present illustration represents the precipices and hills which surround the Cumberland Creek. The soil around the hills is mostly sandstone rubble, hence the only vegetation identical with the spot is the inevitable sword grass and salt scrub, which frequently exist where no other vegetation can be found.’nicholas caire (1837-1918), landscape photography -
Orbost & District Historical Society
branding iron, late 19th -mid 20th century
Branding irons are used to print a burn an identifying marker on the hide of horses or cattle so that they may be later identified if they become lost or escape from their pasture. The irons were typically forged by blacksmiths using a toolset that included hammers, anvils and chisels. The branding irons were used by heating the end bearing the owner’s initials to a very high temperature in a furnace, and then burnishing it against the skin of the cow. Brands were registered with state governments as unique marks. This allowed for a state registry to be maintained. This is an example of an implement used locally in the livestock industry.A branding iron with letter R on circular end. Handle loop is oval shaped. It has been painted blue to half way.branding-iron rural-industry -
Orbost & District Historical Society
branding iron
Branding irons are used to print a burn an identifying marker on the hide of horses or cattle so that they may be later identified if they become lost or escape from their pasture. The irons were typically forged by blacksmiths using a toolset that included hammers, anvils and chisels. The branding irons were used by heating the end bearing the owner’s initials to a very high temperature in a furnace, and then burnishing it against the skin of the cow. Brands were registered with state governments as unique marks. This allowed for a state registry to be maintained. This item is an example of a common implement used in the livestock industry in Orbodt.A long-handled branding iron with an S or 2 on the end. There is a loop at the top for hanging.branding-iron rural livestock-industry -
City of Ballarat
Artwork, other - Public Artwork, B. Raggi, Pomona, Circa 1880
Thomas Stoddart (1828 - 1905) bought 12 white marble statues during a visit to Italy. Stoddart arranged for them to be shipped to Victoria and placed on pedestals of Sicilian marble and on bases of Victorian granite. These statues were unveiled in the gardens on Queen Victoria's birthday, 24th May, 1884. His intention was for the statues to adorn and add interest to the gardens. The Roman Goddess of fruit trees, Pomona, is shown holding a vessel and fruit to illustrate her care and cultivation of trees and the bearing of fruitful abundance.The artwork is of historic and aesthetic significance to the people of BallaratWhite marble figure of a woman holding a vessel and fruitPomona by B. Raggipomona, stoddard, botanic gardens -
Warrnambool RSL Sub Branch
Jumper, Calcoup Knitwear, C 2015
This jumper is part of a General Purpose Uniform issued by the Australian Airforce to Bernard Farley during service. This uniform type was developed in 2014 and replaced camouflage as the uniform worn during general base duties and in non-warlike environments. Although a camouflage pattern, this design is not intended for use as camouflage. This woolen jumper was presumably a winter addition to the GPU.This item has social significance, as an item of uniform worn by Warrnambool RSL community member and Secretary (2019), Bernard Farley during service with the Australian Airforce. The item is a representative example of current Airforce General Purpose Uniform and is in excellent condition. As a set, the uniform has aesthetic significance in it’s design, incorporating GPU uniform design from the Army alongside the colours and motifs of the Australian Airforce. Navy blue ribbed knitted jumper with stitched navy cotton elbow patches, rectangular in shape. Similar rectangular shaped patches on the left and right shoulder, bearing two epaulettes, stiched at one end and fastened with velcro and the other. The left shoulder carries an Airforce embroidered patch at the top of the arm. Arm cuffs have external seam for approximately 100 mm from the end, indicating that the jumper may have been worn with cuffs folded over. Synthetic strip of black fabric on the interior collar behind a cream coloured label.Label on interior of collar reads: “CALCOUP KNITWEAR/291083/ 06/01 / 8405/661468799 / SIZE: 115cm-125cm/SERVICE No........./ NAME........../MACHINE WASHABLE GENTLE CYCLE/Fasten shoulder straps before/washing. Warm machine wash,/inside out on medium cycle./Do not bleach./Warm rinse. Normal spin./Doi not tumble dry./Dry in shade. Warm iron./ Dry Cleanable A/80% Wool 20% Nylon”camouflage, general purpose uniform, airforce, uniform, australian defence force -
Bayside Gallery - Bayside City Council Art & Heritage Collection
Flag, Evan Evans, City of Brighton flag
The coat of arms on this flag were granted by the British College of Arms in 1970 and represented Brighton City Council's "growing awareness of the importance of formality and correct symbolism in local government". It replaced the council's crest of a pier and yachting scene and was used as council's seal, emblem on its flag and letterhead. The new Coat of Arms, drawn up by the College of Arms in England, depicts the progression from a seaside gardening community to a modern residential city. The prominent forms are on the shield-like coat of arms include waves and a Lymphad (a ship, symbolic of the sea); a market gardener; an aboriginal man; two horns of plenty with abundant fruit and vegetables (the wealth and plenty) and Elster Creek (now Elster Canal). It is underscored by the motto "By their fruits, ye shall know them". Brighton was first incorporated as a borough on 18 January 1859, it became a town on 18 March 1887 and was proclaimed a city on 12 March 1919.Green flag with circular City of Brighton Coat of Arms in the centre. The central circle is white with a yellow edge, with a polychrome coat of arms featuring: the crest which is two cornucopia with fruits and vegetables, above sits a seagull. The mantle above the helmet is in green and gold. The shield is also green and gold with a lymphad (ship) and blue and white waves. The market gardener, holding a hoe, and Aboriginal figure, bearing a boomerang, support the shield and stand upon the compartment which is soil with a representation of Elster creek. A ribbon below contains the motto in blue 'FRUCTU NOSCITUR'.flag, brighton, city of brighton, coat of arms, college of arms, market gardener, aboriginal, elster creek, lymphad, fructu noscitur, armorial bearings, heraldry, cornucopia, by their fruits ye shall know them, motto -
Melbourne Tram Museum
Document - Report, Tramway Board, "Return of fuel & Oil used at ...... Power House during the Month of November 1918", Nov. 1918
Set of reports for the "Return of fuel & Oil used at ...... Power House during the Month of November 1918", listing the amount and value of fuels, lubricants, bearing oil, road pulley lubricants, rope oil and rope tar for various cars houses. Prepared on a pre-printed form. Also lists the length of ropes and the average amounts per mile of rope. Form No.374, 7/17 Gives details for the following Power houses. Richmond Fitzroy Brunswick Johnston St North Carlton St Kilda Esplanade Prahran North Melbourne South Melbournetrams, tramways, cable trams, reports, winding houses, power house, richmond, fitzroy, brunswick, johnston st, north carlton, st kilda, esplanade, prahran, north melbourne, south melbourne -
Ambulance Victoria Museum
Chart, medical, human body, the skeleton, J.Teck
Rectangular chart made from printed and coated paper on a fabric base. The chart is mounted at either end on timber batons using small metal tacks. The upper baton is moulded while the lower baton is circular in cross-section. Both batons are stained black.Two screwed metal eyelets have been attached to the upper baton for use in hanging the chart. A short length of redcotton tape is attached to the mid-point of the upper baton with a metal tack. the tape is used to secure the chart after it has been rolled up.A printed paper label is attached to the reverse of the chart bearing the words 'THE SKELETON'. The logo of the St John Ambulance Association and the words 'ST JOHN'S GATE, LONDON E.C.1' are printed on the botton edge of the chart (LHS). The artists name 'J. Teck' is printed just above. A second, unknown logo is printed on the top LH corner of the chart. Much of it has flaked off so it is not possible to read it.medical chart, human body, j.teck -
Orbost & District Historical Society
branding iron, Late 19th -mid 20th century
Branding irons are used to print a burn an identifying marker on the hide of horses or cattle so that they may be later identified if they become lost or escape from their pasture. The irons were typically forged by blacksmiths using a toolset that included hammers, anvils and chisels. The branding irons were used by heating the end bearing the owner’s initials to a very high temperature in a furnace, and then burnishing it against the skin of the cow. Brands were registered with state governments as unique marks. This allowed for a state registry to be maintained. This item was used in Orbost in the livestock industry.This item is an example of an implement once used in the livestock industry in Orbost.A branding iron with the letter W on the end. It has a long iron handle with a ring grip at the top.branding-iron rural-industry -
Orbost & District Historical Society
branding iron, late 19th -mid 20th century
Branding irons are used to print a burn an identifying marker on the hide of horses or cattle so that they may be later identified if they become lost or escape from their pasture. The irons were typically forged by blacksmiths using a toolset that included hammers, anvils and chisels. The branding irons were used by heating the end bearing the owner’s initials to a very high temperature in a furnace, and then burnishing it against the skin of the cow. Brands were registered with state governments as unique marks. This allowed for a state registry to be maintained. This item was used in Orbost in the livestock industry.This item is an example of a common implement used in rural industry in Orbost.A branding iron with the letter J on the end. It has a long handle with a ring grip at the top.branding-iron livestock-industry rural-industry -
Orbost & District Historical Society
branding iron, Late 19th century - mid 20th century
Branding irons are used to print a burn an identifying marker on the hide of horses or cattle so that they may be later identified if they become lost or escape from their pasture. The irons were typically forged by blacksmiths using a toolset that included hammers, anvils and chisels. The branding irons were used by heating the end bearing the owner’s initials to a very high temperature in a furnace, and then burnishing it against the skin of the cow. Brands were registered with state governments as unique marks. This allowed for a state registry to be maintained. This branding iron was used in Orbost. This item is an example of an implement commonly used in the livestock industry in Orbost.A long-handled branding iron with J H at the end. There is a hanging loop at the top.branding-iron rural livestock-industry -
Port of Echuca
Rectangular coloured photograph, 03/04/1984
The P.S Adelaide was re-launched back into the Murray River from the Hopwood Gardens where it had been on display from 1960 in April 1984. The re-launch attracted a lot of attention and took several weeks to achieve. A slipway had to be dug into the bank near Paddlewheel Park. Crowds attended each day. The P.S Pevensy was still bearing the name P.S Philadelphia from it's role in the TV Mini series "All The Rivers Run". In this photo the P.S Philadelphia is welcoming the P.S Adelaide back into the river.This photograph is significant because it shows the re-launch of the P.S Adelaide back into the Murray river. The P.S Adelaide is the second oldest wooden hulled paddle steamer still operating I the world. It also shows the role that P.S Pevensy played in the TV mini series, 'All The Rivers Run." This photograph and negative are related to images P000059.3, P000060.3, P000061.3, P000062.2, P000063.3, P000070.2, P000071.Colour photograph and negative of the P.S Adelaide re-floating in the river, obscured by the P.S Pevensey (with the name Philadelphia written across the wheel house). P.S Pevensy played the part of P.S Philadelphia in the TV mini series 'All The Rivers Run' in 1984. There is a crowd of spectators on the bank. A spectator boat and possibly a pontoon flank the boats.The names of the boats; Adelaide and Philadelphia can be seen written on the boats.p.s philadelphia, p.s pevensey, hopwood gardens, p.s adelaide, all the rivers run -
Unions Ballarat
Photograph: Catherine King campaign poster, July-August 2010
Photograph: Catherine King campaign poster The poster is a photograph of Catherine King, bearing the Labor Party brand/logo and is attached to the front door verandah. Text on the poster reads: (1) Catherine King: Labor for Ballarat; and, (2) Standing up for our community. This was used in the ALP's 2010 campaign. Catherine King is the federal ALP member for Ballarat and has been office since 2001. She was a cabinet minister in the second Rudd ministry and is now part of the Shadow Cabinet. The 2010 election was won by the Gillard government.Photographbtlc, ballarat trades hall, ballarat trades and labour council, king, catherine, alp, australian labor party, election campaigning, politicians, cabinet -
Frankston RSL Sub Branch
Cap, RAAF Peaked
A standard issue Royal Australian Air Force dark blue peaked cap with woven black hat band and patent leather black chin strap secured by gilded buttons with RAAF insignia. A cast economy issue gilded metal Other Rank's RAAF badge is attached to the front of the hat band. The sweatband is made of brown leather and the inside of the cap is lined with blue corded silk with a clear plastic protective cover. A rectangular white manufacturers label is attached to the lining bearing details including size, etc. The serviceman has written his name and service number on the leather sweatband. The manufacturers label is marked: "M.TX, SIZE 67/8, A^F, MADE IN AUSTRALIA" The serviceman has written his name on the leather sweatband, K. I. Fraser, service number A36508. raaf, air force, australia, queens crown badge, -
Federation University Historical Collection
Costume, Perhaps made internally at Alfred Hospital, Nurses Apron, Cap and Collar, 1960s
This nurse's collar, cap and apron would have been worn by student nurses at the Alfred Hospital in Melbourne in the 1960's. Although the style did not change much from earlier years the length of the skirt had shortened. The white semi circular collar has a single row of drawn thread work 1.5 centimeters from the outer edge and is made of starched cotton fabric. The cap is made of a half circle of fine white cotton lawn with a turn back front edge bearing the Alfred Hospital emblem. It has a tape casing about 1.5 centimeters from the edge which contains a thin tape for gathering up the edge of the cap. The white cotton apron has a 5 panel skirt, a waistband with four covered buttons and a bib front which went over the shoulders and buttoned at the back of the waistband.The collar has written in black marker - D.L.Ross E.37; Also written in black marker - E980; A tape printed and machine stitched on - L.A. Holberton The cap has a printed emblem - Alfred Hospital Incorp. Melbourne, Service and Care The apron has written in black maker - M Taylor; E877; J. Williamsalfred hospital, nursing, nurse uniform, student nurse uniform, nurse apron, nurse cap, nurse collar, apron, costume, textiles -
Bendigo Historical Society Inc.
Document - PADDY'S GULLY LINE - NOTES ON PADDY'S GULLY LINE
Handwritten notes on Paddy's Gully Line. Two long Xcuts put in at 642 ft & 1206 ft. (Sea mine). In the Sea ground and the immediate vicinity there were many claims at work on the line in the early 1860's and also from 1870 to 1872. For one of them, owned by the Poaddy's Gully Co $40,000 was refused. Gold-bearing quartz was reached in this mine at 396 feet, but the water was too strong to allow of work being gone on with. On a separate piece of beige paper is written: Origin of Paddy's Gully Line - See Annals of Bendigo 1862, Page 81.document, gold, paddy's gully line, paddy's gully line, notes on paddy's gully line, paddy's gully co, paddy's gully line annals of bendigo 1862 page 81 -
National Vietnam Veterans Museum (NVVM)
Uniform - Uniform, RAAF, Party Suit
A black one piece Dining Suit (party suit) similar in style to a short sleeve Flying Suit, with zippered front and pockets, bearing Squadron Leader epaulettes worn by the then Squadron Leader Alan Reed whilst serving in Vietnam in 1968. It has a white embroidered RAAF brevet on the left chest, with a "Phamous Phantom Spook" (82 Wing RAAF F4E) caricature above the embroidered name ALAN REED on the right chest. Three additional embroidered patches are attached to the suit (RF-4C, 100 Missions Vietnam and Aussie Air Pirate) two on the chest and one on the left sleeve.White embroidered RAAF Brevet on left breast."Phan"alan reed, united states air force, air pilots -
Whitehorse Historical Society Inc.
Equipment - Camera, c1915
Camera was originally owned by the owners grandfather and used by him at home and overseas. Later given to his son (donors farther)Brownie Autographic Folding No.2 Camera. Uses 120 roll film. Has a steel inscribing pin for writing on film through window on back of camera to record details. Has a ball bearing shutter - patented in USA, Jan 18, 1910 - Jan 7, 1913. Bellows folds back into camera and can be adjusted to 8,25, or 100 feet from object. Viewfinder can be varied from portrait to landscape view. It has a leather handle - film loaded by opening clip on lower front. Leather carrying case with name of original owner -G.H.Parsons, Melbourne, Victoria, Australia.photography, cameras