This is a MANCUR spring balance. They were used for rough weighing on farms, in kitchens, on hunting trips for animals or hides. Large numbers of Mancur scales were made in America and Europe during the latter half of the nineteenth century, and they were generally used by farmers.This item is an example of an early type of hanging scale.A set of small round hanging scales with a hanging hook. It has two suspension rings and two load hooks. It has a brass crescent shaped plate in the centre calibrated in lbs, a needle as pointer which is hinged to the C spring. It has double sided measurements with graduations in pounds. scale-mancur measurement weight hanging-scales

Timber box with brass clasp at the front. Inside is lined with green felt. Black plastic yarn meter with handle grip, pulley wheels and window showing the measurement gauge. Patent panel on the back. 2 pieces of paper- one is a diagram of the battery (?). The other is a general overview of the product.wool, hatra, yard speed meter

BHS CollectionSeven page document with diagrams of the remnant footings of the North Deborah Gold Mine, the South Deborah Gold Mine, Deborah Extended, Deborah Consolidated, Deborah United Deborah Associated. Measurements of footings recorded but sites are not to scale. Researched and drawn by Philip Wilkin and Kay MacGregor, 2014.bendigo, mining, central deborah gold mine

Possibly the Yellow Box, Eucalyptus melliodora, Laughing Waters Road, Eltham 80 m from Reynolds Road http://vhd.heritagecouncil.vic.gov.au/places/71057 Outstanding size Outstanding specimen Located 80m from Reynolds Road, this tree is one of the few remaining forest trees that covered the area before settlement. Measurements: 11/1981 Spread (m): 23 Girth (m): 4.3 Height (m): 42 Estimated Age (yrs): 250+ Condition: Good Measurements: 20/09/2010 Spread (m): EW 20 NS 23 Girth (m): 4..5 Height (m): 40 Estimated Age (yrs): 250+ Condition: Access: Unrestricted Classified: 17/02/198335mm colour positive transparency (1 of 3) Mount - Kodak Ektachromeunidentified, significant tree

Report - typed carbon copy - 13 foolscap sheets stapled within a brown card folder bound with red adhesive tape. Titled "Ropes - Trolley", dated October 1954 though has a date stamp on the first page of the report itself of 26/10/1955, prepared by the MMTB Testing Department, Report No. R7/1/43. Report looks at the insulation resistance offered by trolley ropes when dry and wet, new and used ropes and the possibility of causing electric shocks. Gives a reference to a previous August 1952 test. Undertook examination of the ropes, electrical measurements and electrical measurements of the human body. Has a number of appendices and details the test results.trams, tramways, preston workshops, reports, specification, tramcars, trolley poles, equipment

Binoculars have been in existence for over 100 years for recreational and military use. The Carl Zeiss factory in Jena, Germany was founded in 1846 and manufactured optical systems such as cameras, binoculars and riflescopes and industrial measurement devices and medical equipment. Binoculars are still commonly used today. These binoculars have no known local provenance and are retained for display purposes.These are a pair of black binoculars with a brown leather strap. It is contained within a brown leather case. The case has a brown leather strap and metal buckle and a metal and leather clasp. Carl Zeiss Jena Binoctar 1389040 7 X 50 vintage optical goods, history of warrnambool

Record shows the condition of the rail head at many points throughout the Ballarat system. Gives the type of rail, its weight, gauge, location and date of measurement See item 9127 for a report on the Special Work. Some sections measured in May 1954, rest May 1955Demonstrates a detailed report into the condition and wear of the Ballarat Tramways trackwork in 1954/1955.Report - within a manila card folder with steel clips containing about 44 drawings on drawing paper of rail sections.Outside cover in ink "Legend Track Gauges"ballarat, secv, trackwork, rails, reports

The Ballarat Technical Art School boasted a well-stocked Antique Room replete with plaster copies of classical, Renaissance and Gothic sculptural examples, which were used as drawing props by students. The school inherited some casts from its predecessor institutions, and further consignments were purchased during the 1920s, including full length, bust and relief figures, as well as dozens of ornamental and architectural casts. Unfortunately, much of the collection was lost or destroyed in the late 1950s. This is one of the few surviving pieces. The foot came into the school’s collection prior to 1920 as it appears in a photo in the SMB Annual Report. There are two possibilities where these sculptures may have originated, either Victorian and Albert Museum or the British Museum. There is a reference to the purchase of plaster casts from the Victoria and Albert Museum in the 1918 School of Mines Ballarat Minute Book. This plaster cast of a foot is of local significance as only one of a few remaining teaching pieces from the substantial collection of sculptures used in the art school. The foot also has significance as an interpretive tool complementing the complete art folio of Edith Alice Watson who was a student from 1930-1933.Plaster cast of right foot including ankle. Made from plaster of Paris. Mainly white in colour with grey patches around metatarsels, flecks of blue and green paint and pale brown paint (possibly shellac) and on top of ankle. Measurements suggest a size 11 man's right foot.plaster cast, foot, drawing aid, art school, smb, edith alice watson, 1931, 1931-33, 1918, 1920, plaster of paris, sculpture, ballarat technical art school number 10, drawing from the antique, drawing the human figure from cast

Hand written description of poppet heads by E. R. Meekison, Senior Inspector of Mines. Description and measurements of poppet heads which were manufactured by A. Roberts and Sons, Engineers, Bendigo. Also a note on a Winding Engine at Garden Gully United. Reference T. M. Hooper, Mine Manager.mine, gold, central garden gully gold mining co, central garden gully gold mining company, e. r. meekison, a. roberts and sons, garden gully united, t. m. hooper

The banana bottle is often referred to as the hygienic bottle, and is aptly named. It was the saviour of many hand reared babies in early 20th C. It's ease of cleaning was a major breakthrough in nursery hygiene. The basic design was around for about 50 years. It first made its appearance around the mid 1880's. The first true banana feeder with a teat and valve was invented in 1894 by Allen and Hanbury's. In the next 15 years the model was modified over a series of four slightly different models. In 1910 the final design, The Allenbury Feeder was to remain unchanged for the next 50 years.A clear glass Felgrim Banana bottle (valve and teat) for feeding babies by hand. The brand is stamped in large ornate lettering inside an oval shape on the wide front of the bottle. It has two open ends for attaching teats. 8oz measurements are marked on one side and 16 tablespoons on the other. 'Felgrim' brand and 'Made in England Free from arsenic and lead'baby bottles, baby equipment, babies, domestic objects

A collection of replicas of survey maps acquired to build the Wodonga to Tallangatta Railway line. Each survey includes a diagram of a portion of the line showing survey measurements and details of the land which that portion of the line will run through. It also includes the name of the landowner from whom the necessary land was acquired.The first section of the Wodonga to Tallangatta line opened in 1889 and was further extended in 1891. It was a vital community link until the passenger service closed in September 1961. The last regular goods train on the line ran on 21st April 1978. These maps give detail of the surveying and building of the line.victorian railways, wodonga to tallangatta rail service

Spirits came in bottles sold at licensed premises either locally or in larger cities visited during shopping expeditions. The shape and colour of the bottles varied. An 'Imperial Pint' was the standard measurement at the time. The opening of bottles was hand made prior to 1915. History of Mitchell & Co. Belfast Ltd.Historical: Change of bottles - shape, glass, embossing, manufacture Aesthetic: Display showing how made, embossing, shapeClear glass bottle with green tinge and heavy embossing. Used for Old Irish Whisky. The bottle has a longitudinal join on each side but the opening has been hand made without the joins. The bottle is an oval shape with long straight sides three quarters of the way up tapering to the neck which has a lip and then the opening. The base of the bottle is curved inwards.Front: top and curved around the bottle's shape: 'Old Irish Whisky'. Inside of which is a shield shape with a crown shape inside it. Either side of the shield horizontally 'Trade' (the shield) then 'Mark'. Same side off bottle at bottom are 2 lines in heavily embossed print also in capital letters 'Mitchell & Co / of Belfast Ltd.' Back: curved around the bottle's shape inside a 'ribbon' is "Imperial Pint"spirits, bottle, old irish whisky, mitchell & co. belfast ltd.

Cream was stored and sold in bottles and bought at a local store. History of Haberfield's. The measurement of liquids was in pints and money in pence (d) pre 1966. Bottles were returned to the manufacturer who reused the bottle. To encourage the return of bottles, collectors were given 3d (pence) per bottle. Historical: Dairy farmers living in the Kiewa Valley, sent their milk to be separated into cream by a Dairy company and then sold to the public. Aesthetic: Display showing variations of shape, embossing and stencillingSmall clear glass bottle containing one third of a pint and used to carry cream. it tapers to a lip at the neck. On one side and the base it is heavily embossed. Under the embossing on the side it is stencilled in red and black words and outline of a picture of a happy man wearing a tie pointing to the writing.Base: Common Seal with 'A' and 'G' and 'M' inside the 'A'. under which is '91/6' under which is' ISM - 707' Side: embossed: Third Pint Side: stencilled: Haberfield's (red) / always red (black) / Pasteurised (red on black) / Cream (white on black) Opposite side: stencilled: 3d Deposit / On This Bottle (all in red)dairy, farmers, haberfield's, cream

The firm Dring and Fage were active from 1790 to 1940 in London and were manufacturers of hydrometers and mathematical instruments they became established in London in 1790 by John Dring, who was a brass worker and hydrometer maker, and William Fage. Dring and Fage manufactured also saccharometers and other instruments used to measure the strength of alcohol. These instruments were primarily used to calculate excises. They traded at various addresses in London and they were at 56 Stamford St. between 1903 and 1938. By 1850 the company was owned by Edward Hall and Edward Jenkin and in 1940 the company became Dring & Fage Ltd, trading till the 1960s. Historically, gauging has meant measuring a volume, these gauging instruments were used by Customs and Excise and manufacturers for determining the volume and contents of liquid containers. For Customs the determination and collection of duty on imported goods which has had a very long history. Chaucer was a Customs Officer as was his father and grandfather, excise was first officially introduced in 1643, with the aim of maintaining military forces raised by the English Parliament at that time. Excise was initially a duty on home produced alcoholic beverages and soap but being easily applied, spread rapidly to a wide range of goods including imports of varying kinds. The government departments of Customs and Excise merged only in 1909 and it is from around this time that our instrument was made and used. The item demonstrates a long social history of the practice of Government's collecting duty on alcoholic beverages and thereby makes this item historically significant as it was used locally at Port Fairy by the ports Customs agents. Gauging rod or bung rod; ullaging gauge. Long brown wooden gauging rod with brass tips and sliding brass marker. Measurements are marked along the length of the rod. Used for measuring volume of liquor in casks in order for Customs to calculate excise (tax) on the contents. Made by Dring & Fage, London.Engraved “Dring & Fage 56 Stamford St London flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, gauging rod, ullaging rods, measuring instruments, customs tax, dring & fage, alcohol measurement

These rulers have been distributed by the Warrnambool chemist, George Le Couteur as advertising tools for his business. George Le Couteur operated a pharmacy at 78 Liebig Street, Warrnambool from 1896 to 1908. Born in Warrnambool in 1856 Le Couteur was educated at the Anglican-sponsored Warrnambool Common School No. 691 and then spent four years at Beechworth Grammar School. He was apprenticed to the Warrnambool chemist, Michael Ryan and then worked as a chemist in Kyneton and Melbourne. When he returned to Warrnambool he took over the business of Frank Uren in Liebig Street, building a second storey on to the building. He was very active in community affairs in Warrnambool. He left Warrnambool in 1908 to open a pharmacy in Hawthorn, Melbourne. When he retired in 1935 he was the oldest registered chemist in Victoria. The information hand printed on the back of one of the rulers has an historical inaccuracy in that J.A. Bromfield was not the first known chemist in Warrnambool. These rulers are of interest because of their connection to the pharmacy business of George Le Couteur He was a prominent person in Warrnambool in the 19th and early 20th centuries.These two oblong wooden rulers have imperial measurements ( to 12 inches). There is black printing on both sides advertising a Warrnambool chemist. One ruler is much stained and has a piece missing on the centre top edge. The other ruler has information on one side hand printed in black ink.‘With compliments of G.T. Le Couteur, Chemist, Liebig Street, Warrnambool’ ‘For a cough or cold use Le Couteur’s Pectoral Cough Mixture. Bottles 1s.6d., 2s.6d.’ ‘First Chemist Shop in Warrnambool 1853 Mr A. Bromfield – Chemist, rebuilt 1898 by G.T. Le Couteur – 1973 shop same as at 1898 situated 78 Liebig Street’ george le couteur, history of warrnambool

The Rev John Edward Smith was born in 1900, ordained in 1932 and died 1986. He served in 1935 Port Campbell; 1937 Wychproof; 1940 Werribee; 1947 Bendigo St. John's; 1952 Albury; 1955 Essendon St. John's and 1967 Apollo Bay. He retired in 1969 and in 1971 was appointed Emeritus Presbytery Melb. West.Black and white head and shoulders studio portrait of Rev. John Edward Smith. He is wearing glasses, looking at the camera and is wearing his clerical regalia. The back has the photographer's name and address, also that of the Rev Smith. It laso has various numbers and measurements indicating that the photograph was to be used in a publication."Rev. J. (John) Edward Smith. 853 Mt. Alexander Road, Essendon, W.5 PHONE FU1085" "The Dover Studio 17 HOLMES ROAD, MOONEE PONDS"presbyterian ministers, john edward smith, st john's presbyterian church essendon

Bob (Herman) Hymans (a former member of the Royal Netherlands Navy was born in Bloemendaal, Holland on 30th September 1922. During World War II he fought against the Japanese in the Dutch East Indies (now Indonesia) and was imprisoned in Changi and on the Burma Railway. After gaining qualifications as a Ski Instructor, Bob arrived in Falls Creek in May 1950. Working as an Instructor and Supervisor at Bogong Lodge, Bob decided his future was in accommodation. He was successful in negotiating an indenture for land from the State Electricity Commission (SEC). It took Bob two years to build his Grande Coeur Chalet but, tragically, it was burned down in August 1961. Bob also built the first Chairlift in Australia. This was a single chairlift and the structure was built from wooden electricity poles. He was constantly full of new ideas and proposals for the village. Bob Hymans died on 7th May 2007. This Collection of documents and letters tells the story of Bob’s endeavours to develop Falls Creek into the ski village it is today. This map is significant because it documents boundaries of early leases in Falls Creek Tourist Area.This map is part of Bob Hymans documents. It is a large Surveyor's Plan of a section of the Falls Creek Tourist Area. It is endorsed by J Parker, Chief Surveyor of the State Electricity Commission of Victoria on 27-3-84. It shows streets, lot numbers and measurements. It was a compilation created from existing lease maps. Heading - PART OF FALLS CREEK TOURIST AREA PART OF CROWN ALLOTMENT 1 PARISH OF CARRUNO PART OF CROWN ALLOTMENT 1 PARISH OF DARBALANG COUNTY OF BOGONGmap of falls creek, falls creek leases, falls creek 1980s

This is a set of 16 photograph of the Royal Australian Survey Corps’ Johnson Ground Elevation Meter (JGEM) Survey Vehicle taken at the Army Survey Regiment, Fortuna, Bendigo. The JGEM vehicle was extensively used by RA Svy within Australia from the late 1960s. A limited number of Ground Elevation Meter (GEM) station wagon type vehicles were manufactured by General Motors Corporation (GMC) in the USA for the United States Geological Survey, Canada’s mapping agencies, RA Svy and National Mapping (Natmap). The GEM was a four-wheel drive, four-wheel steer vehicle. Four-wheel steering was necessary to avoid systematic errors caused by non-tracking of front and rear wheels on conventionally steered vehicles. The manufacturer substituted the rear axle with a front axle and connected them to form the four-wheel steering mechanism. The two Australian GEM vehicles, referred to as Johnson GEMs (JGEMs) were converted into right-hand drive. After delivery in 1964, acceptance Natmap and RA Svy testing and operator training was undertaken at the Army's School of Military Survey located at Balcombe, Victoria. A small fifth wheel was mounted on a cantilever arm suspension midway between the front and rear wheels on the right side of the vehicle. It was lowered to and raised from its operating position by use of a constant pressure air cylinder. A telescopic bar, suspended between the front and rear axles, provided the reference datum for the angle measurement. The wheel provided the velocity or distance signal through a pulse generator system. A sensitive pendulum mounted on this bar provided the angle measurement for each minute distance traversed. The JGEM contained electromechanical instruments used to determine relative elevations, by trigonometric principles, along a traversed path. These relative elevations were obtained through apparatus which measures the instantaneous angle of inclination of the road and the instantaneous velocity of the meter along such a path. Road routes over which the JGEM operated were planned so that each started and ended as near as practicable to an existing point of known elevation (formally referred to as a level traverse bench mark). The difference in height from the bench mark and the road surface alongside the JGEM’s fifth wheel was measured with a level and staff. Along each route, mapping control photo reference points where new elevation values were required were identified on aerial photographs. Under favourable conditions it was possible to survey as much as 160km in an ordinary working day. The first of RA Svy’s JGEM operations was undertaken in 1:250,000 scale map areas of Queensland. CPL John Hook was the JGEM’s main operator in the early 1970s undertaking operations covering 1:250,000 scale map blocks over northern Victoria and central NSW, each requiring 36 points (9 runs of photography and 4 points across. SPR Lyn Thompson and SPR Bob McDonagh teamed with CPL Hook on some of these JGEM operations. When RA Svy was integrated into the Royal Australian Engineers in 1996, the JGEM vehicle with the Survey Corps collection was donated to its museum. It is believed to be the last of the original manufactured fleet in existence. The JGEM has undergone extensive refurbishment to achieve roadworthiness and is currently housed at The Australian Army Museum of Military Engineering, Hoslworthy Barracks, NSW. It can be viewed by making an appointment with the museum’s curator.This is a set of 16 photograph of the Royal Australian Survey Corps’ Johnson Ground Elevation Meter (JGEM) Survey Vehicle taken at the Army Survey Regiment, Fortuna, Bendigo. The photographs were on 35mm slide film and were scanned at 96 dpi. They are part of the Army Survey Regiment’s Collection. .1) - Photo, colour, c1960s, Johnson Ground Elevation Meter (JGEM) Survey Vehicle .2) - Photo, colour, c1960s, JGEM instrumentation, on-board computer. .3) - Photo, colour, c1960s, JGEM instrumentation. .4) - Photo, colour, c1960s, JGEM instrumentation, on-board computer. .5) - Photo, colour, c1960s, JGEM tyre pressure controller .6) - Photo, colour, c1960s, JGEM rear doors, SGT Geoff Briggs. .7) - Photo, colour, c1960s, JGEM 5th wheel distance/angle measurement device in lowered position, SGT Geoff Briggs. .8) - Photo, colour, c1960s, JGEM 5th wheel distance/angle measurement device in lowered position. .9) & .10) - Photo, colour, c1960s, JGEM tyre pressure system, SGT Geoff Briggs. .11) - Photo, colour, c1960s, JGEM tyre pressure system. SGT Geoff Briggs. .12) - Photo, colour, c1960s, JGEM levelling scope, levelling staff, unidentified technicians. .13) & .14) - Photo, colour, c1960s, JGEM levelling scope, unidentified technician. .15) & .16) - Photo, colour, c1960s, probably survey operation adjusted height plotted on block base sheet. .1P to .16P - Some of the equipment is annotated on the frame of the 35mm slides.royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, surveying

Hand-made manometer is mounted on a flat, rectangular chrome platform. It comprises three valves labelled A, B and C. Valve C is connected to a glass measuring cylinder via a curved metal pipe. Item also includes a small spanner and brown plastic mock leather case with metal clasp, hinges and studs.Engraved into the floor of the device are the instructions on what valves to open and shut for 'infusion, fill and read'. Engraved on spanner: Geoffrey Kaye Engraved on clasp of case: Kaye BJ.2749anaesthesia, dr geoffrey kaye, manometer, venous pressure manometer, measurement, spanner, chrome, invention, manufacture

The plans were used for the construction of the lifeboat ‘Warrnambool’, which began 15th September 1909 and was completed almost 12 months later 1st September 1910. It was built at the Government Dockyard in Williamstown, Victoria, along the lines designed by Great Britain’s Royal Lifeboat Institution, and included whaleback decks fore and aft, mast and centreboard, and rudder and tiller hung from the sternpost. It could be propelled by both sail and oar. At that time Captain Ferguson was Chief Harbour Master and Mr Beagley was the foreman boat builder. Mr Beagley built the lifeboat with his fellow workmen. The boat was described as “… a fine piece of workmanship and does credit to her builders and designers…” It had all the latest improvements in shape, disposition of weight and watertight compartments, and it had space for a large number of people in addition to the crew. It appears that 'H Meiers' whose signature was on the plaque that was found concealed in the hull, was involved with the building of the lifeboat. His signature and the dates of the start and finish of the boat’s construction are pencilled on the raw timber 'plaque' found in the hull in the early 1990s when the lifeboat was being restored. It is interesting that the ‘Melbourne Directory’ of 1911, published by Sands and MacDougal, lists McAuley and Meiers, boat builders, Nelson Place foreshore, between Pasco and Parker Streets, Williamstown, (Victorian Heritage Database, ‘Contextual History, Maritime Facilities’), It is quite possibly the business of the person whose name is inscribed on the lifeboat plaque. Flagstaff Hill’s documentation also mentions that the keel was laid at ‘Harry Myers, boat builders, Williamstown, Melbourne’ – the name ‘Myers’ can also be spelled ‘Meiers’, which could be the same person as the Meiers in “McAuley and Meiers” (as mentioned in genealogy lines of Myers). The new lifeboat, to be named ‘Warrnambool’ was brought to town by train and launched at the breakwater on 1st March 1911 using the Titan crane (the old lifeboat built in 1858, was then returned to Melbourne in 1911). This new lifeboat was stationed at Warrnambool in a shed located at the base of the Breakwater, adjacent to the slipway. A winch was used to bring it in and out of the water. The lifeboat ‘Warrnambool’ was similar in size to the old lifeboat but far superior in design, build and sea-going qualities such as greater manoeuvrability. The ‘self-righting, self-draining design was “practically non-capsizeable” and even if the boat overturned it would right itself to an even keel and the water would drain away. The hull was built of New Zealand Kauri, using double diagonal planking, laid in two layers at right angles, with a layer of canvas and red lead paint between the timbers to help seal the planking. It has “… plenty of freeboard area, high watertight spaces between the deck and bottom… through which pipes lead…” The backbone timbers were made of Jarrah. The lifeboat Warrnambool was one of several rescue boats used at Port Fairy and Warrnambool in the early 1900s. In late 1914 the Warrnambool lifeboat and crew were used to help find what was left of the tragic wreckage of the Antares and were able to discover the body of one of the crewmen, which they brought back to Warrnambool. Between 1951 and 1954 the lifeboat was manned under the guidance of Captain Carrington. He held lifeboat practice each month on a Sunday morning, to comply with the Ports and Harbour’s request that lifeboats be manned by a strong and competent crew, ready for action in case of emergency. In the early 1960’s it ended its service as a lifeboat and was used in Port Fairy as a barge to help dredge the Moyne River, bolted to the Port Fairy lifeboat. Flagstaff Hill obtained the Warrnambool in 1975. In 1984 it was on display at Flagstaff Hill Maritime Village, Warrnambool. On 23rd May 1990, she was lifted from the water and placed in a cradle for restoration. The name ‘WARRNAMBOOL could be seen faintly on the lifeboat before it was restored. It was during the restoration that Flagstaff Hill's boat builder discovered the 'plaque' inside the hull. A copy of the blueprint plans has the name “V.E.E. Gotch” printed on it. His advertisement in Footscray’s ‘Independent’ newspaper of Saturday 11th May 1901 states he is “Principal and Skilled member (Naval Architect) to the Court of Marine Inquiry of Victoria and holds classes for naval architectural drawing and arithmetic.” The line drawing is significant for its connection with the lifeboat WARRNAMBOOL. The lifeboat is very significant to local and state history for its use in the lifesaving rescues of seafarers, particularly in Lady Bay. It was part of the local rescue equipment. It gave a half-century of service to the local community as a lifesaving vessel, including its involvement in retrieving the body of a shipwrecked crew member of the ANTARES. Line drawing in black ink and pencil on rectangular parchment or waxed linen. Drawing has diagrams of three profiles of a vessel, with measurements and connecting pencil lines on the left quarter. The plan is for the lifeboat named “Warrnambool”, which was built in Melbourne and completed in 1910. Old blue copies of the Lifeboat plan are archived also.“LIFE BOAT / FOR / WARRNAMBOOL” “Scale, One Inch to One Foot” “ “Length as shown 30’ – 8” “ “Breadth “ “ 8’ – 6 ½ “ “ “Depth “ “ 3’ – 4 ¾” “flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, lifeboat, warrnambool lifeboat, boat plans, lifeboat plans, boat construction, boat building, line drawing, plan for lifeboat, life boat, life boat 'warrnambool', clinker design, 1910 lifeboat, life saving equipment, shipbuilding

5613b Foolscap size photocopy of survey map with handwritten notations. References include Knight's land, Wantirna Road, Canterbury Road, house, wirenetted, orchard, grass paddock, I certify that these notes are a true copy of observations and measurements taken on the ground by me (signed) H.W. Moore 5/6/17.

5614b Foolscap size photocopy of survey map with handwritten notations. References include Wantirna Road, to Ringwood Station, Reilly Street, J. Marshall, fence to be erected on boundary, I certify that these notes are a true copy of observations and measurements made on the ground by me (signed) H.W. Moore 22/6/17.