Bendigo Preserving Company Weekly Wages Ledger between 5th February 1936 to 10th May 1939 5th Feb 1936: 39 males & 102 females weeks wages £317 10s 7p 10th May 1939: 35 males & 28 females weeks wages £191 4s 10p a-c book d frontice page - attached Amalgamated Food Reserving Employees Union of Australia sheets e-h weeks wages 5/02/1936 (first entry) i-k weeks wages 10/05/1936 (last entry) l-m & q rear pages n-p years wages spreadsheet ending 30th June 1939 (over three loose pages) (scannedd nn-pp) r years wages statement issued to Mrs F. Mottram 14th july 1939 for £82 11s 11p (scanned rr)nil

Black and white photograph of a photo of the School Council 1912-13 which may have been in a frame. There is a plaque at bottom of photo with the words 'Martin Hannah Esq M.L.A. / First President of the / Collingwood Technical School / from his Colleagues on the Council 1912/13'. Also a separate list of the members of the Council. Members of the First Council are listed in Scott's history as: Hon. M. Hannah, MLA (President), J.W. Billson, W.R. Butcher, R. Harper, G. Pinkerton, D. Provan, Hon. J.G. Membrey (MLA), Cr. W. Rain, Cr. H.S. Trevena, A.C. Wright, M. Richmond (Principal). (Scott p5)collingwood technical school, school council, m.h.hannah, mla, nmit

Mortgage, 22 May 1922, property from H. R. G. Edwards to The Commissioners of the State Savings Bank of Victoria. Freehold in Pyke Street Bendigo.bendigo, land sales, 36576, pyke street bendigo., harold raymond george edwards, the commissioners of the state savings bank of victoria.

Conveyance of land, dated 23 May 1922, by Mrs. Isabella Melrose to Mr. H. R. G. Edwards. Attachment indicates a red coloured area conveyed to William Prout Bevan, dated 7 August 1937, Registered 18 August 1937 by Memorial No. 316, Book 555.bendigo, land sales, melrose, edwards, bevan, william prout bevan, isabella melrose , harold raymond george edwards. solicitor quick & luke murphy pall mall bendigo.

Hand written letter titled 'The graves beside the swamp at Boort.' dated November 1962. Two of the headstones lie broken on the grass covered graves. On the granite slab at the right is the inscription 'In memoriam. George F. Campion of Exeter Devon, England, who departed this life, May 31st 1851. Aged 19 years. The 2 month old baby boy of 'John and Jane', married couple on 'Boort', died the same day and was buried beside Campion. There is nothing to mark his grave. Both were buried by the Station men. Mr J. R. Godfrey read the burial services for both. On the marble slab at the left can be deciphered the inscription sacred to the memory of George Bertram, fourth son of Henry and Mary Godfrey, Born 18th November 1858. Died 11th April 1860. On the headstone still standing can be read the inscription Sacred to the memory of Samuel C. Sutlee, who died April 1st 1871, aged 2 years 4 months. He is not dead - but sleepeth. This child was the son of a married couple 'on Boort', after the Godfrey family had left 'Boort'. Note - My nephew Russell Coutts of 'Dunbar', Boort, (formerly 'Boort' Station) is erecting a fence around the graves. His son, Peter took these photographs. I wrote the verses 'Beside the Swamp' after my first visit to them in 1957. I always take flowers and place them on the graves whenever I visit 'Dunbar' Selina M. Deravin 1962Russell Coutts and his son Peter have restored the graves beside the Lake at 'Dunbar' and erected a graveyard. This photograph was taken by Peter and the flowers placed on the graves by his mother Wilma who helps to care for them. They also discovered a fifth unknown grave there when erecting the fence and re- erecting the broken and fallen headstones. S. M. Deravin.Selina M. Deravinmemorials, graveboards, boort cemetry, russell coutts, 'dunbar', peter coutts, george f. campion, boort cemetery, samuel c. sutlee?.

Bendigo Advertiser "The way we were" from Saturday, May 8, 2004. Days of yore: the Korong Shire councillors and officers in 1900. Back row from left: Cr R. Redwood, S. Rinder (secretary), Cr J. Catto, Cr D. Chalmer. Middle row: Cr T. Tunsall, Cr J. McKechie, Cr T. Morphel, Cr E. Ennis. Front row: R.R. Hawkin (engineer) J.R. Gray (assistant secretary), Cr R. Kennedy.newspaper, bendigo advertiser, the way we were

Bendigo Advertiser "The way we were" from Monday, May 31, 2004. Skills: Sandhurst Boys Training Centre 1958/9. Among staff member pictured in the back row are: J. Spicer, J. Murphy, A. Abbott, P. Turner, J. Sherlock, Mrs Moore, I. Davidson, R. Porra, J. Porra, B. Dillon, C. Dillon, J. Scollon, R. Harrington and A. Conroy. In front of staff are some of the many trainees to go through the centre over its years of operation.newspaper, bendigo advertiser, the way we were

Bendigo Advertiser "The way we were" from Thursday, May 5, 2005. Batter up: the Bendigo School of Mines baseball team of 1946. Front: J. Hutchinson, T. O'Toole, P. Birol, R. Watt, W. Bugg. Back: I. Aitken, I. Harrowfield, D. Bruce, A. Pane, M. Lefoe, K. Mitchell, M. McHale.newspaper, bendigo advertiser, the way we were

One damaged copy of 'Embers' vol. 1 No. 1 May, 1947. This is the first issue of news-sheet aimed at keeping students in tune with current events at the college. Added aims are for students to keep a record of their life at the college and for ex-students to keep in touch. Included is a photo of lecturer Mr. Duncan teaching a class and various contributions by college members. Attached to this, is a copy of 'Embers' Vol. 1 No. 2 Aug. 1947. It includes a photograph of female students participating in Physical Education also news from around the college and a page for 'Exies'. The editor for both publications is Howard R. Harvey.bendigo, education, embers, la trobe university bendigo collection, collection, bendigo teachers' college, bendigo, education, tertiary education, students, staff, 'embers' vol.1 no. 2 aug 1947, newspaper, publications, magazine, howard r. harvey, mr. duncan, history

The John Bovaird Collection. Commonwealth of Australia Wheat Bounty Act 1934 State of Victoria Claim for Payment. By Errol Balfour Bovaird of May Reef PO via Avonmore. Regarding 96 bushels delivered for sale to R. Anderson of Lockington. Wheat produced on 50 acres : Allotment 25 Parish of Pannoo Bamawm. Dated 13/4/1935. Pink paper.agriculture, farm, wheat crop

The John Bovaird Collection. Commonwealth of Australia Wheat Bounty Act 1934 State of Victoria Claim for Payment. By Errol Balfour Bovaird of May Reef PO via Avonmore. Regarding 96 bushels delivered for sale to R. G. Anderson of Lockington. Wheat produced on 50 acres : Allotment 25 Parish of Pannoo Bamawm. Dated 13/4/1935. Pink paper.agriculture, farm, wheat crop

Return of the commissioning plaque to the City of Bendigo Victoria. The H.M.A.S.Bendigo 50th Anniversary was on the 10th May 1941 to 12 May 1991military, world war 2, h.m.a.s. bendigo, 50th commissioning anniversary h. m. a. s. bendigo, hmas bendigo association, ansett airways, mr ray burton, eric spooner, laurie bower, james (doc) walsh, colin (doc) reinke, dean thomas, wally eves, noel (lofty) bushell, laurie (banjo) patterson, lex dalgleish, bendigo naval cadets, lt peter covinton-thomas, captain s j griffith, captain j h dowson, mrs burton, rear admiral mike hudson, commadore jeffrey a morten, army survey unit bendigo, lt col r van den tol & mrs van den tol, chief superintendent fox & mrs fox, bendigo naval club, mr des norman & mrs norman, bendigo r s l, mr henry o'halloran & mrs o'halloran, mr john barnes & mrs barnes, welcome stranger motel/reception centre, mr john walsh, st andrews uniting church

Typed history of the Newport Railway Workshops. Mentions the men who worked at the workshop, the locomotives that were built there, the different classes of locomotives, the equipment they used, and some of the work they did. Written by G. Donneau (who worked there) and dated 19-3-79.document, victorian railways, the newport story, g donneau, melbourne and geelong railway co, melbourne & hobson's bay united railway co, mr william meikle, solomon mirls, richard speight, sir james allport, midland railway, mr allison dalrymple, phoenix foundry, north melbourne loco depot, beyer peacock & co, mr a e smith, roger barnes, thomas tait, bhp, f j shea, commonwealth ordnance department, james rooks, london times, mr merz, mr mclellan, bendigo north railway workshops, ballarat shops, james taylor, donald mcgregor, julius aurelian sylvester barber, victor lethlean, melbourne institute of technology, prince of wales, queen victoria, w m shannon, sir thomas bent, puffing billy, harold winthrop clapp, francis boardman clapp, melbourne tramway & omnibus co, austral otis engineering co, melbourne university, franklin supply co, e h brownbill, heavy harry, locomotive mausoleum north melbourne, north british locomotive co, walter stinton, thomas smith, peter alexander, peter alexander, robert ferguson, king george v, english railway gazette, harry nunn may, merz & maclellan, arthur lowe, r h roach, w h chapman, l c rolls, g a swift, john mcrae, caledonian society, thistle club, bristol hotel, james taylor, george allibon, walter grimshaw, robert maybin, roy hodge, walter biddle, john ramsbottom, robert hewitt, james green, thomas waldhuter, giles dobney, mr richardson, mr arthur, sydney express, the age, mr speight, david syme, father gapon

The Phonic Ear hearing aids were actually auditory trainers for children in school. This aid was also an FM receiver so the child could clearly hear the teachers' voice. This was used by the student to receive the teachers' transmissions. For more information see: http://www.hearingaidmuseum.com/gallery/Miscellaneous/Assistive%20Devices/Phonic%20Ear/info/phonicearfmsystem.htm Beige FM Receiver with red plug-in crystal module (colour coded for frequency) and two leads on either side for hearing aids. This would have been used by the student to receive the teachers transmissions. Masking tape on front, obscuring name, writing on tape faded. "MODEL/HC 421 R/STEREO/AUDITORY TRAINER/FM/CERTIFICATION/THIS RECEIVER COMPLIES/ WITH FCC RULES PART 15/OPERATION IS SUBJECT/TO THE CONDITION THAT/ THE DEVICE WILL NOT/CAUSE HARMFUL INTER-/FERENCE AND THAT THE/DEVICE MUST ACCEPT ANY/INTERFERENCE THAT/MAY BE RECEIVED, INCL-UDING INTERFERENCE/THAT MAY CAUSE UN-/DESIFED OPERATION./PHONIC EAR/MODEL HC 421 R/TYPE GODKENOT/ deaf children australia, hearing aid, auditory training device, phonic ear

A burnout ute in the front of 3 member (Bob Oslow (deceased)in the middle of the photo reaching towards the steering wheel, Jon Briese with the fire hose and John Jones (deceased) beside him. It looks like there may be a fourth member looking under the hood (but unidentified). In the photo there are also several onlookers in the background. LE DAWN STUDIOS black and white photoL to R Bob Oslow (deceased) Jon Briese John Jones (deceased) (STAMPED) LE DAWN STUDIOS specialised photography WANGARATTA 59a Murphy St. 'PHONE 3675

List of names from C to Wcolour photograph unmountedTroopers: J C Cowden, J P Deegan, W J Eddington, J Gardiner, J A Madden, W Henderson, L Hutchinson, W Leishman, H V Mays, M R Morris, C A Mullen, G Mullen, L L Mullen, F L Newell, T J F Putt, S Parrott, R Pomeroy, J C Ross, F Raleigh, G Smith, S Smith, P SInclair, C G Stewart, J M Thomas, S Tompsitt, G M Wells, H T Wells, D H Willan

Double Headed Rail from Ravenswood Station Siding which was dismantled circa 1987 the two rails were stored for a time at Maldon before being donated to Puffing Billy Museum Bearing makers marks of Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield, North East Derbyshire, England from 1872 - 1883 Double-headed rail In late 1830s Britain, railway lines had a vast range of different patterns. One of the earliest lines to use double-headed rail was the London and Birmingham Railway, which had offered a prize for the best design. This rail was supported by chairs and the head and foot of the rail had the same profile. The supposed advantage was that, when the head became worn, the rail could be turned over and re-used. In practice, this form of recycling was not very successful as the chair caused dents in the lower surface, and double-headed rail evolved into bullhead rail in which the head was more substantial than the foot. Info from Wikipedia - Rail Profile https://en.wikipedia.org/wiki/Rail_profile The first records of double headed rail being used In Victoria by Victorian Railways was in 1859, the rails, chairs, oak and trenails were imported from UK. After the 1870’s the Victorian Railways went over to using flat bottom rails, but they still needed replacement double headed rail for lines already laid and this continued up to at least 1883 Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield England from 1872 - 1883 Mount Alexander & Murray River Railway The Melbourne, Mount Alexander & Murray River Railway Company received parliamentary assent in February 1853 to build Victoria's first inland railway from Melbourne to Williamstown, and Melbourne to Bendigo and Echuca. Construction commenced in January 1854 with work on a pier at Williamstown but lack of funds slowed progress, eventually prompting the company to sell out to the government. The 100-mile (162 km) section to Bendigo opened in October 1862. Its cost of £35,000 per mile made it the most expensive railway ever built in Australia. In 1864, the line was extended to Echuca, tapping into the booming Murray-Darling paddlesteamer trade. info from Museums Victoria - Victorian Railways https://museumsvictoria.com.au/railways/theme.aspx?lvl=3&IRN=450&gall=456 1863 Ravenswood Station open on the 1st Feb 1863 Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Ravenswood Siding When the Victorian Railways were established in 1856 they adopted one of the popular British permanent way standards - heavy 80lb (36.3kg) double-headed rail held up right in cast iron chairs attached to transverse timber sleepers by wooden pegs called trenails. The Ravenswood Railway siding was constructed in 1862 with 12 feet wrought iron double-head rail held in cast iron chairs with Ransom and May patent compressed keys. Trenails held the chairs to the sleepers and the joints were secured in joint chairs. Joints were subsequently joined using fish plates. It formed part of the Melbourne to Echuca rail line, initially known as the Melbourne, Mt Alexander and Murray River Railway. George Christian Derbyshire, the first Engineer-in-Chair of the Victorian Railways was responsible for the design and construction of the works. No new lines were built in Victoria using double-headed rail after 1870. The siding was disconnected from the main line in 1988. The Ravenswood Railway Siding demonstrates the original 1856 philosophy of the Victorian Railways to adopt British permanent way technology. The siding demonstrates significant aspects in the development of permanent way technology in England and Victoria over the period from the 1830's to the 1880's. The chairs in the Ravenswood siding are physical evidence of early railway technology rendered obsolete 120 years ago, namely joint chairs at rail joints and trenails to secure the chairs to the sleepers. The double-headed rail demonstrates an important stage in the evolution of British rail technology in the 1830s. The old fish plates, square headed bolts and square nuts demonstrate the success of fishing the rail joins. The Ravenswood siding demonstrates the earliest form of rail joint technology developed in England, and existing in Australia, the joint chair. In part of the siding the sequence of joint and intermediate chairs is consistent with the 1856 specifications, that sequence is rare with the joints secured in joint chairs. The survival of chairs in this sequence is rare and almost certainly demonstrates that they remained in continuous use at the same location from 1862 to 1988. This remnant of the Ravenswood siding has survived 126 years. The siding has proved to be the most significant of extant remnant double-headed sidings in Victoria, containing a rare combination of early permanent way technologies. Construction dates 1862, Info from Ravenswood Railway Siding Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/4693/download-report The remaining section of this siding is significant at the State and National levels in that it demonstrates the use of chaired rail by the Victorian Railways Department for the Trunk Lines and, more particularly, the following stages in the evolution of this long obsolete method of permanent way construction: a) The use of joint chairs and intermediate chairs at regular intervals inferring that the original wrought iron rail lengths were 12 feet, as is known through documentary sources to have been the case. The survival of chairs in this sequence is unique and almost certainly demonstrates that they have remained in continuous use at the same location and in the same sequence from 1862 to 1988 . b) The use of joint chairs and intermediate chairs designed for use with trenails. c) The use of later intermediate chairs designed for use with steel pins and the use of fished joints with steel double head chaired rail, representing a second method of constructing the permanent way using chaired rail technology. info from Ravenswood Siding - Melbourne/Echuca Railway Line - Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/70103/download-report Addition to Citation for Melbourne to EchucaRailway Line 1/10/1990 Double Head Rail The surviving lengths of double head rail with chairs on this railway compare with one surviving similar remnant on the Geelong to Ballarat railway and are representative of permanent way construction techniques applied exclusively to the two trunk railways of the 1860's. In this respect they are rare survivors and may be unique at the national level and of technical importance at the international level to the extent that they enhance contemporary understanding of early railway building technology. Surviving lengths of chaired double head rail survive at Kyneton, Ravenswood and Bendigo on this railway and include a number of different types of cast iron intermediate and joint chairs with hardwood keys and metal pins. The Ravenswood siding is of special significance for the diversity of chair types and for the sequence of chairs recalling rail lengths known to be associated with construction of the line in 1862. Construction of the Railway Tenders closed on 24 March 1858 with no less than 133 tenders being received. A contract was let to Cornish and Bruce for £3,356,937 to commence work on 1 June 1858 and complete the line by 31 July 1861. Cornish and Bruce made quick early progress with the Melbourne to Sunbury section being officially opened on 13 January 1859. The line was officially opened to Bendigo (Sandhurst) on 20 October 1862 by the Governor of Victoria, Sir Henry Barkly. A great banquet was held for 800 guests and this was followed by a grand ball. The extension of the line to Echuca was a relatively simple matter as that part of the line was across plain country without any significant engineering challenges. Tenders were called for the work in 1863 and the work was completed in 1864 by contractors Collier and Barry Apart from the line contractors, other firms directly involved were J Shire law and Co (sleepers), R Fulton, Langlands Brothers and Co, William Crossley (water supply), B Moreland, Langlands Brothers and Co (platelayers lorries), E Chambers (iron pins, traversers), Miller and McQuinstan (luggage vans and steam engines) and various contractors for building works. Info from Engineers Australia Engineering Heritage Victoria Nomination for Recognition under the Engineering Heritage Australia Heritage Recognition Program for the Goldfields Railways - Melbourne , Bendigo & Echuca Railway Page 25 - .2.9.2 Statement from National Trust of Australia (Victoria) Listing number B5323 for Mt Alexander/Murray Valley Rail Line: Page 69 - Theme 3 https://www.engineersaustralia.org.au/portal/system/files/engineering-heritage-australia/nomination-title/Melbourne_%20Bendigo_Echuca%20Railway%20Nomination.pdf The Melbourne, Mount Alexander and Murray River Railway Company was a railway company in Victoria, Australia. It was established on 8 February 1853 to build a railway from Melbourne to Echuca on the Victorian-NSW border and a branch railway to Williamstown. The company struggled to make any progress and on 23 May 1856, the colonial Government took over the Company and it became part of the newly established Department of Railways, part of the Board of Land and Works. The Department of Railways became Victorian Railways in 1859. Construction of the Bendigo line commenced in 1858, but this private consortium also met with financial difficulties when it was unable to raise sufficient funds, and was bought out by the Victorian colonial government. The design work was then taken over by Captain Andrew Clarke, R. E., Surveyor-General of Victoria, with bridge designs completed by Bryson and O'Hara The contract for the first stage of the line from Footscray to Sandhurst (now Bendigo), was let to Cornish and Bruce for £3,356,937.2s.2d ($6.714 million) with work commencing on 1 June 1858. Completion of the permanent way was to be by 31 July 1861 https://en.wikipedia.org/wiki/Melbourne,_Mount_Alexander_and_Murray_River_Railway_Company Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Victorian Railways : report of the Board of Land and Works November 1862 GP V 1862/63 no. 21 (2.8 MB) https://www.parliament.vic.gov.au/papers/govpub/VPARL1862-63No21.pdfHistoric - Victorian Railways - Double Headed rail Ravenswood Railway Station and Siding Victorian Heritage Database Reports Victorian Heritage Register VHR H1100 Victorian Heritage Register VHR H1786 National Trust VHR H1100 Mount Alexander and Murray River Rail way Line National Trust2 rail lengths of Double Headed Rail made of Iron makers marks : Wilson & Cammell - Dronfield - Steel and 20 joint chairs with metal rail pins Makers mark Wilson & Cammell - Dronfield - Steel (possible date 187? very hard to read ) puffing billy, double headed rail, wilson & cammell - dronfield - steel works, ravenswood station siding, melbourne to echuca rail line, initially known as the melbourne, mt alexander and murray river railway.