A school sampler from the 1930's, demonstrating a mastery of numerable sewing skills: Buttonholes- both bound;6 bound buttonholes. Button loop fastening 17 rouleau loops. Seams: Plain flat seam, machine stitched-part neatened by hand, and part neatened by machine. An overlapped flat seam-machine stitched. Fasteners: Press-studs (3) Buttons (4) shanked and f;flat. Metal hook-and-eyes (3), one eye hand stitched, all attached in buttonhole stitch. Pockets: (2) Machine stitched. Collar: (1) Rounded ''Peter Pan"" collar, with bound placket opening, one pearl button, and hand stitched loop. Facings (3). One square, one round, one Vshaped. Pintucks: 4 machine stitched pintucks.textiles, domestic, school needlework sampler 1930's

Clothing. Cream silk infant's christening coat. Fold down collar on round neckline with squared corners. Collar has four X 5 cm slits - one on either side of the shoulder. Collar has embroidered edges and floral embroidery on each section(5). Yoke at front and back. Skirt sections front and back have 7 cm smocked section where attached to the yoke. Edge of each yoke has decorative embroidered leaves that continue along both edges of front opening and around the hemline. Lower sections of the front skirt have embroidered floral patterns. Long sleeves are gathered at shoulders with 4 cm section of smocking 2 cm at the wrist with 2 cm gathered edge at hem. Front opening is fastened at throat with metal hook and cotton loop, and three X one cm pearl look buttons beside the smocked section. Two silk fabric ties (68 cm X 14 cm) are gathered and attached below the collar an each side front opening. Unlined. All embroidery in cream coloured silk cotton, slightly darker than silk fabric.costume, children's, infant's silk christening coat

Beautiful soft cream silk dress, with a random silk embroidered three petal flower over the fabric. Round neckline with overlaid square yoke of embroidered lace on a net background. Two 7cm wide bands of the lace are gathered over the shoulder armhole edge. These frills, and the scalloped edges of the front and back lace yoke are trimmed with 4 cm long decorative silk tassels.(one missing). Long sleeves, tapered in at the wrist are trimmed at the wrist with a 4.5cm wide band of lace, part of which is threadedwith two rows ofsoft pink silk ribbon insertion. Soft pink silk, folded into three 2.5cm tucks-overall width 6cm trim the high waistline, with a 7cm diameter rosette at the left front, and a bow(?), and tails, trimming the back waistline. This is severely damaged. Four metal hook and loops fasten the back lace collar, and nine metal hooks and eyes fasten the bodice. Bodice and sleeves are fully lined. Bodice is boned with thirteen 12-4 cm long ''bones''. Skirt is in two tiers; Top is 38cm deep, and made from the plain embroidered silk. A 5cm deep band of lace, with scalloped edges then joins the 36 cm deep ;lower panel of beautifully embroidery and pulled threadwork. Hem is faced, and finished or hemmed with french knots. Dress , which is hand stitched is fully lined with cotton. The lower 36 cm deep tier of the underskirt is trimmed with three .5cm tucks, and two 8cm bands of cutwork lace in a floral and geometric pattern. An oval shaped pocket is sewn into the front of the ''petticoat'' lining. This pocket contained some plant material, included in attached bag.costume, children's, cream embroidered silk and lace dress

This came from the butcher's/baker's cart on display at the Slab Hut (Orbost Visitor Information Centre). The cart came from Sederlan's Bakery and had been used outside the premises as advertising. The original chassis had been added to extensively with shafts, wheels and tyres added. This axle appears to have part of the cart - either a baker's or butcher's cart.An axle from a butcher's cart. It has been painted red and is made of iron. The shaft is rounded in the centre with square sections near the ends. It has 2 U-bolts to attach the shafts to the cast springs. It has a set of washers at both ends.axle cart transport

The Snowy River Boat Club was formed in 1950, went into recess in 1972 but re-formed in 1977. It was a power boating club based in Marlo.A brim and band from a Snowy River Boat Club hat. There is a cloth badge of the Snowy River Boat Club. It is embroidered in blue and black with a boat outlined in red. The badge is square shaped and has rounded corners. It is loosely sewn above the black brim.snowy-river-boat-club power-boats

A clear glass bottle. It has a paper label and bar code. It is square shaped with rounded shoulders.MADE IN CHINA 130mls DISP. BOX ingredients details Bath GEL/GLITTERbottle container bath-gel

This shawl may have been used for Marjorie Burton or earlier. It has been passed down fcrom the Whiteman family through the Burton family. Marjorie Burton ( nee Whiteman), born 12 June, in Birmingham, England came to Orbost in 1995. In England she did office work – typing, shorthand and secretarial work - in accountants’ offices and also trained as a comptometrist with Burroughs in London. She came from a middle-class, working, church-going family. Her mother was a milliner who made many of Marjorie’s clothes, hats and outfits. Marjorie was married in 1938 to a salesman who later became a mechanic in the R.A.F. This item is an example of a handmade item of clothing and reflects the needlework skills of women in the first half of the twentieth century.A square crocheted silk shawl with a lacy pattern. It is cream coloured and has rounded corners.crochet handcraft shawl burton-marjorie

Two square shaped bottles with rounded shoulders. They are lipped and probably had glass stoppers.2376.1 is pink and 2376.2 is a light brown colour.2376.1 - on base 4 2376.2 - on base - 6container glass-bottle

This Post Office Receiving Pillar was restored in 1980 and is now a fully operational Australia Post mailbox. In early August 1980 Prime Minister Mr. Fraser posted Warrnambool’s first commemorative envelope into this restored Post Office Receiving Pillar at Flagstaff Hill Maritime Village. The special limited edition envelopes are numbered 1 – 7000. When posted, the envelopes would have the Flagstaff Hill Logo and Flagstaff Hill Maritime Village’s own postmark of a ship’s steering wheel surrounding a lighthouse and a sailing ship, and were dated August 3 on the First Day Cover. Amongst Flagstaff Hill’s collection is that very first letter posted by Prime Minister Fraser. HISTORY OF POST OFFICE RECEIVING PILLARS In 1851 ‘pillar boxes’ were installed at roadside locations in the island of Jersey, England; they had already been successful in several European countries. The use of new prepaid, adhesive postage stamps as well as the roadside pillar boxes meant there was no need for the public to take a trip to the Post Office just to post a letter. By 1855 London had installed its first six Pillar Boxes. In 1856 the pillar boxes were first introduced in Sydney. These were circular with a crown on the dome, supported by leaves. Early Victoria Mail was originally collected by ‘letter carriers’, first appointed in Melbourne in 1841, equipped with leather bag and hand bell. He wore a red coat with brass buttons and a black top hat! In 1844 two wooden receiving boxes were erected in Melbourne. The first cast iron boxes were installed in South Melbourne (Emerald Hill) and were still in service until 1967. They were a fluted circular design and made in England. In the early 1860’s the ‘low door round’ design posting box was introduced, being circular and surrounded by a crown, with two broad embossed bands around its circumference. The clearance door was in front of the box and low down. These were made in Australia. In the early 1870’s square boxes with a tapering top were being used. These too were made in Australia by different manufacturers with slight variations on style such as the orientation and number of slots. Next came the circular boxes again, similar to the ‘low door round’ but with the clearance door extending to just below the posting slot, often referred to as ‘high door round’. These boxes did not have embossed bands. In 1887 small cast iron boxes were introduced, attached to posts and poles and called ‘lamp post receivers’. Around 1930 a ‘London’ model was used in Victoria. It was copied from the flat-domed type in London but made in Tasmania. [References: Flagstaff Hill Maritime Village records, The Warrnambool Standard, August 1st, 1980, “Stamps.Au” http://www.stampsau.com, 4th April 2011 (Extracted from “Australian Street Posting Boxes” by Ken Sparks – out of print)] Post Office Receiving Pillar, or letterbox.1885 “High Door Round” design. Tall cast iron cylinder with decorative dome cap with crown on top. Side has a slot and a hinged door with handle shaped as a fist. Painted red with gold trim. “POST OFFICE / RECEIVING PILLAR” lettering cast into cylinder. Restored in 1980 and once again operating as an Australia Post mailbox. Commemorative plague on pillar.“POST OFFICE / RECEIVING PILLAR” lettering cast into cylinder. Flagstaff Hill Maritime Museum – Port of Warrnambool. This letter receiver was officially commissioned on 3rd August 1980 by the Prime Minister of Australia, the Right Honourable Malcolm Fraser M.P. on completion of 25 years’ service as the Federal Minister for Wannon.”flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, post office receiving pillar, letterbox, mailbox, australia post

Post Office Receiving Pillar was Collected from Warrnambool City Council’s Scott Street Depot and transported to Flagstaff Hill, stored in the Barracks area Friends of Flagstaff Hill began the project of restoring the Post Office Receiving Pillar in early 2011. The replacement dome required a pattern to be made from paper, then timber, then someone to manufacture it. The cast iron body required sand blasting and undercoating. The pillar was installed in Flagstaff Hill Maritime Village in March 2014. A specialist visited the Village and painted the pillar with 7 coats of ‘post office red’ then completed the job with gold paint on the details. In 2015 an information plate of brass was fitted to the Pillar in the position that would have originally announced the clearing times. It was originally manufactured by G Couch, Engineer, Alliance Iron Works, Melbourne. Gordon Couch passed away in June 1896 and his Works were offered for auction in November 1897. HISTORY OF POST OFFICE RECEIVING PILLARS In 1851 ‘pillar boxes’ were installed at roadside locations in the island of Jersey, England; they had already been successful in several European countries. The use of new prepaid, adhesive postage stamps as well as the roadside pillar boxes meant there was no need for the public to take a trip to the Post Office just to post a letter. By 1855 London had installed its first six Pillar Boxes. In 1856 the pillar boxes were first introduced in Sydney. These were circular with a crown on the dome, supported by leaves. Early Victoria Mail was originally collected by ‘letter carriers’, first appointed in Melbourne in 1841, equipped with leather bag and hand bell. He wore a red coat with brass buttons and a black top hat! In 1844 two wooden receiving boxes were erected in Melbourne. The first cast iron boxes were installed in South Melbourne (Emerald Hill) and were still in service until 1967. They were a fluted circular design and made in England. In the early 1860’s the ‘low door round’ design posting box was introduced, being circular and surrounded by a crown, with two broad embossed bands around its circumference. The clearance door was in front of the box and low down. These were made in Australia. In the early 1870’s square boxes with a tapering top were being used. These too were made in Australia by different manufacturers with slight variations on style such as the orientation and number of slots. Next came the circular boxes again, similar to the ‘low door round’ but with the clearance door extending to just below the posting slot, often referred to as ‘high door round’. These boxes did not have embossed bands. In 1887 small cast iron boxes were introduced, attached to posts and poles and called ‘lamp post receivers’. Around 1930 a ‘London’ model was used in Victoria. It was copied from the flat-domed type in London but made in Tasmania. … [References: Flagstaff Hill Maritime Village records, The Argus, 11th April, 1890, The Argus, 2nd July, 1896, The Argus, 30th Nov. 1897, “Stamps.Au” http://www.stampsau.com, 4th April 2011 (Extracted from “Australian Street Posting Boxes” by Ken Sparks – out of print)] Post Office Receiving Pillar, or letterbox.1885 "High Door Round" design, restored 2014 Tall cast iron sylinder with decorative dome cap, slot in side, hinged door with handle shaped as a fist. Painted red with gold trip..Reconditioned barrel, reconstructed dome. Restored by Friends of Flagstaff Hill, 2014. Now a working letterbox. Made in Melbourne.Oval maker's plate “ - G. COUCH - / ENGINEER / ALLIANCE IRON / WORKS / MELBOURNE”flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, post office receiving pillar, letterbox, mailbox, australia post

The objects comprise a quantity of small calibre lead shot raised from the LOCH ARD shipwreck site by Flagstaff Hill divers in 1976. The Maritime Village’s collection has companion pieces. The three masted, iron hulled, LOCH ARD was wrecked against the tall limestone cliffs of Mutton Bird Island in the early hours of the first of June 1878. Included in her diverse and valuable cargo were 22 tons of lead shot, packed in cloth bags and wooden casks. Bulk quantities of lead shot, uniformly round balls of dull grey metal ranging from 2mm “birdshot” to 8mm “buckshot”, were routinely exported to the Australian colonies. Shot was used mostly as projectiles fired from smooth bored guns to bring down moving targets such as wild ducks and small game. It was also useful as ballast, when a dense, “pourable” weight was required to fill cavities or establish volume within a measuring container. The production of consistently round spheres of lead shot required the pouring of molten metal through a sieve and then a long drop through the atmosphere to a water filled basin for final cooling and collection. This “shot tower” process was first patented by William Watts of Bristol in 1782. His calculation of a 150 feet fall was not only to form evenly spherical droplets through surface tension, but also to provide partial cooling and solidification to each shot before they hit the water below. The value of his innovation was the minimising of indentation and shape distortion, avoiding the expense of re-smelting and re-moulding the lead. Lead shot was already being produced in Australia at the time the LOCH ARD loaded her cargo and left Gravesend on the second of March 1878. James Moir constructed a 157 feet circular stone shot tower near Hobart in 1870, with a peak annual production of 100 tons of lead shot sold in 28 pound linen bags. However colonial demand exceeded this source of local supply. The continued strength of the market for lead shot in the Colony of Victoria prompted substantial investment in additional productive capacity in Melbourne in the next decade. In 1882 Richard Hodgson erected the 160 feet round chimney-shaped Clifton Hill shot tower on Alexandra Parade (VHR H0709) and in 1889 Walter Coop built the 160 feet square tower-shaped Melbourne Central shot tower on La Trobe Street (VHR H0067). At its peak, the Coop Tower produced 6 tons of lead shot per week, or 312 tons per annum. HISTORY OF THE LOCH ARD The LOCH ARD belonged to the famous Loch Line which sailed many ships from England to Australia. Built in Glasgow by Barclay, Curdle and Co. in 1873, the LOCH ARD was a three-masted square rigged iron sailing ship. The ship measured 262ft 7" (79.87m) in length, 38ft (11.58m) in width, 23ft (7m) in depth and had a gross tonnage of 1693 tons. The LOCH ARD's main mast measured a massive 150ft (45.7m) in height. LOCH ARD made three trips to Australia and one trip to Calcutta before its final voyage. LOCH ARD left England on March 2, 1878, under the command of Captain Gibbs, a newly married, 29 year old. She was bound for Melbourne with a crew of 37, plus 17 passengers and a load of cargo. The general cargo reflected the affluence of Melbourne at the time. On board were straw hats, umbrella, perfumes, clay pipes, pianos, clocks, confectionary, linen and candles, as well as a heavier load of railway irons, cement, lead and copper. There were items included that intended for display in the Melbourne International Exhibition in 1880. The voyage to Port Phillip was long but uneventful. At 3am on June 1, 1878, Captain Gibbs was expecting to see land and the passengers were becoming excited as they prepared to view their new homeland in the early morning. But LOCH ARD was running into a fog which greatly reduced visibility. Captain Gibbs was becoming anxious as there was no sign of land or the Cape Otway lighthouse. At 4am the fog lifted. A man aloft announced that he could see breakers. The sheer cliffs of Victoria's west coast came into view, and Captain Gibbs realised that the ship was much closer to them than expected. He ordered as much sail to be set as time would permit and then attempted to steer the vessel out to sea. On coming head on into the wind, the ship lost momentum, the sails fell limp and LOCH ARD's bow swung back. Gibbs then ordered the anchors to be released in an attempt to hold its position. The anchors sank some 50 fathoms - but did not hold. By this time LOCH ARD was among the breakers and the tall cliffs of Mutton Bird Island rose behind the ship. Just half a mile from the coast, the ship's bow was suddenly pulled around by the anchor. The captain tried to tack out to sea, but the ship struck a reef at the base of Mutton Bird Island, near Port Campbell. Waves broke over the ship and the top deck was loosened from the hull. The masts and rigging came crashing down knocking passengers and crew overboard. When a lifeboat was finally launched, it crashed into the side of LOCH ARD and capsized. Tom Pearce, who had launched the boat, managed to cling to its overturned hull and shelter beneath it. He drifted out to sea and then on the flood tide came into what is now known as LOCH ARD Gorge. He swam to shore, bruised and dazed, and found a cave in which to shelter. Some of the crew stayed below deck to shelter from the falling rigging but drowned when the ship slipped off the reef into deeper water. Eva Carmichael had raced onto deck to find out what was happening only to be confronted by towering cliffs looming above the stricken ship. In all the chaos, Captain Gibbs grabbed Eva and said, "If you are saved Eva, let my dear wife know that I died like a sailor". That was the last Eva Carmichael saw of the captain. She was swept off the ship by a huge wave. Eva saw Tom Pearce on a small rocky beach and yelled to attract his attention. He dived in and swam to the exhausted woman and dragged her to shore. He took her to the cave and broke open case of brandy which had washed up on the beach. He opened a bottle to revive the unconscious woman. A few hours later Tom scaled a cliff in search of help. He followed hoof prints and came by chance upon two men from nearby Glenample Station three and a half miles away. In a state of exhaustion, he told the men of the tragedy. Tom returned to the gorge while the two men rode back to the station to get help. By the time they reached LOCH ARD Gorge, it was cold and dark. The two shipwreck survivors were taken to Glenample Station to recover. Eva stayed at the station for six weeks before returning to Ireland, this time by steamship. In Melbourne, Tom Pearce received a hero's welcome. He was presented with the first gold medal of the Royal Humane Society of Victoria and a £1000 cheque from the Victorian Government. Concerts were performed to honour the young man's bravery and to raise money for those who lost family in the LOCH ARD disaster. Of the 54 crew members and passengers on board, only two survived: the apprentice, Tom Pearce and the young woman passenger, Eva Carmichael, who lost all of her family in the tragedy. Ten days after the LOCH ARD tragedy, salvage rights to the wreck were sold at auction for £2,120. Cargo valued at £3,000 was salvaged and placed on the beach, but most washed back into the sea when another storm developed. The wreck of LOCH ARD still lies at the base of Mutton Bird Island. Much of the cargo has now been salvaged and some was washed up into what is now known as LOCH ARD Gorge. Cargo and artefacts have also been illegally salvaged over many years before protective legislation was introduced. One of the most unlikely pieces of cargo to have survived the shipwreck was a Minton porcelain peacock - one of only nine in the world. The peacock was destined for the Melbourne International Exhibition in 1880. It had been well packed, which gave it adequate protection during the violent storm. Today, the Minton peacock can be seen at the Flagstaff Hill Maritime Museum in Warrnambool. From Australia's most dramatic shipwreck it has now become Australia's most valuable shipwreck artefact and is one of very few 'objects' on the Victorian State Heritage Register. The shipwreck of the LOCH ARD is of State significance – Victorian Heritage Register S417 Flagstaff Hill’s collection of artefacts from LOCH ARD is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. It is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417). The collection is significant because of the relationship between the objects, as together they have a high potential to interpret the story of the LOCH ARD. The LOCH ARD collection is archaeologically significant as the remains of a large international passenger and cargo ship. The LOCH ARD collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The collection is also historically significant for its association with the LOCH ARD, which was one of the worst and best known shipwrecks in Victoria’s history. A quantity of lead shot pellets retrieved from the wreck of the LOCH ARD. There are 242 loose 2mm pieces and 17 loose 4mm pieces. They are in good condition, with some shape distortion and sedimentary concretion, and shot tower made.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, loch line, loch ard, captain gibbs, eva carmichael, tom pearce, glenample station, mutton bird island, loch ard gorge, lead shot, colonial industry, melbourne shot towers, victorian metallurgy, colonial imports

The objects are a sample of medium caliber lead shot raised by Flagstaff Hill divers from the Loch Ard shipwreck site in 1976. Included in the vessel’s cargo manifest were 22 tonnes of lead shot, packed into her holds in cloth bags and wooden casks. These 49 pieces of 7 mm diameter lead shot are identical in size and smoothness. Each one also bears the same slightly raised square of residual metal left behind by the process of pouring molten lead into individual but identical moulds through a small (square) opening. These pieces of shot can be compared with contrast pieces in the Maritime Village collection, which are examples of shot tower pellet production; an industrial technique more suited to the creation of uniformly spherical balls that do not need subsequent trimming. In conventional shot tower production, lead is heated in a cauldron at the top of a 150-160 feet tower, and poured through a copper lattice that divides the metal into falling droplets. As these droplets fall, they spin into small spheres and gradually cool, before finishing in a pool of water at the bottom of the tower. However the maximum size of lead shot, and the economic efficiency of shot tower production, is limited by the practical height of the drop. Larger diameter lead shot must fall further in order to cool evenly and sufficiently to avoid shape distortion on hitting the water at the base. This sample of larger 7 mm lead shot, although mass produced, appears to have been manufactured under the traditional and more labour intensive mould system. They are therefore distinct from the other samples of smaller gauged and shot tower produced lead shot that were being imported on the Loch Ard . In terms of metallurgical technology these 7 mm shot are more closely related to an artifact in our Collection (No. 5241) — a forged set of pincers or pliers with two facing cups at the end. When the pincers are closed, the cups join to form a single mould. Molten lead is poured through a small (circular) opening left at the top of the mould. When cooled the pincers are opened, breaking the mould and releasing the lead shot. The excess metal left over from the pouring operation at the top of the ball is then trimmed off using the scissor like cutting edges on the inner side of the pliers handles. In this manner, individual shooters were able to make their own ammunition for their shotguns. History of the Loch Ard: The Loch Ard got it’s name from ”Loch Ard” a loch which lies to the west of Aberfoyle, and to the east of Loch Lomond. It means "high lake" in Scottish Gaelic.The vessel belonged to the famous Loch Line which sailed many vessels from England to Australia. The Loch Ard was built in Glasgow by Barclay, Curdle and Co. in 1873, the vessel was a three-masted square-rigged iron sailing ship that measured 79.87 meters in length, 11.58 m in width, and 7 m in depth with a gross tonnage of 1693 tons with a mainmast that measured a massive 45.7 m in height. Loch Ard made three trips to Australia and one trip to Calcutta before its fateful voyage. Loch Ard left England on March 2, 1878, under the command of 29-year-old Captain Gibbs, who was newly married. The ship was bound for Melbourne with a crew of 37, plus 17 passengers. The general cargo reflected the affluence of Melbourne at the time. Onboard were straw hats, umbrella, perfumes, clay pipes, pianos, clocks, confectionery, linen and candles, as well as a heavier load of railway irons, cement, lead and copper. There were other items included that were intended for display in the Melbourne International Exhibition of 1880. The voyage to Port Phillip was long but uneventful. Then at 3 am on June 1, 1878, Captain Gibbs was expecting to see land. But the Loch Ard was running into a fog which greatly reduced visibility. Captain Gibbs was becoming anxious as there was no sign of land or the Cape Otway lighthouse. At 4 am the fog lifted and a lookout aloft announced that he could see breakers. The sheer cliffs of Victoria's west coast came into view, and Captain Gibbs realised that the ship was much closer to them than expected. He ordered as much sail to be set as time would permit and then attempted to steer the vessel out to sea. On coming head-on into the wind, the ship lost momentum, the sails fell limp and Loch Ard's bow swung back towards land. Gibbs then ordered the anchors to be released in an attempt to hold its position. The anchors sank some 50 fathoms - but did not hold. By this time the ship was among the breakers and the tall cliffs of Mutton Bird Island rose behind. Just half a mile from the coast, the ship's bow was suddenly pulled around by the anchor. The captain tried to tack out to sea, but the ship struck a reef at the base of Mutton Bird Island, near Port Campbell. Waves subsequently broke over the ship and the top deck became loosened from the hull. The masts and rigging came crashing down knocking passengers and crew overboard. When a lifeboat was finally launched, it crashed into the side of Loch Ard and capsized. Tom Pearce, who had launched the boat, managed to cling to its overturned hull and shelter beneath it. He drifted out to sea and then on the flood tide came into what is now known as Loch Ard Gorge. He swam to shore, bruised and dazed, and found a cave in which to shelter. Some of the crew stayed below deck to shelter from the falling rigging but drowned when the ship slipped off the reef into deeper water. Eva Carmichael a passenger had raced onto the deck to find out what was happening only to be confronted by towering cliffs looming above the stricken ship. In all the chaos, Captain Gibbs grabbed Eva and said, "If you are saved Eva, let my dear wife know that I died like a sailor". That was the last Eva Carmichael saw of the captain. She was swept off the ship by a huge wave. Eva saw Tom Pearce on a small rocky beach and yelled to attract his attention. He dived in and swam to the exhausted woman and dragged her to shore. He took her to the cave and broke the open case of brandy which had washed up on the beach. He opened a bottle to revive the unconscious woman. A few hours later Tom scaled a cliff in search of help. He followed hoof prints and came by chance upon two men from nearby Glenample Station three and a half miles away. In a complete state of exhaustion, he told the men of the tragedy. Tom then returned to the gorge while the two men rode back to the station to get help. By the time they reached Loch Ard Gorge, it was cold and dark. The two shipwreck survivors were taken to Glenample Station to recover. Eva stayed at the station for six weeks before returning to Ireland by steamship. In Melbourne, Tom Pearce received a hero's welcome. He was presented with the first gold medal of the Royal Humane Society of Victoria and a £1000 cheque from the Victorian Government. Concerts were performed to honour the young man's bravery and to raise money for those who lost family in the disaster. Of the 54 crew members and passengers on board, only two survived: the apprentice, Tom Pearce and the young woman passenger, Eva Carmichael, who lost her family in the tragedy. Ten days after the Loch Ard tragedy, salvage rights to the wreck were sold at auction for £2,120. Cargo valued at £3,000 was salvaged and placed on the beach, but most washed back into the sea when another storm developed. The wreck of Loch Ard still lies at the base of Mutton Bird Island. Much of the cargo has now been salvaged and some items were washed up into Loch Ard Gorge. Cargo and artefacts have also been illegally salvaged over many years before protective legislation was introduced in March 1982. One of the most unlikely pieces of cargo to have survived the shipwreck was a Minton majolica peacock- one of only nine in the world. The peacock was destined for the Melbourne 1880 International Exhibition in. It had been well packed, which gave it adequate protection during the violent storm. Today the Minton peacock can be seen at the Flagstaff Hill Maritime Museum in Warrnambool. From Australia's most dramatic shipwreck it has now become Australia's most valuable shipwreck artifact and is one of very few 'objects' on the Victorian State Heritage Register. The shipwreck of the Loch Ard is of significance for Victoria and is registered on the Victorian Heritage Register Ref S 417. Flagstaff Hill has a varied collection of artefacts from Loch Ard and its collection is significant for being one of the largest accumulation of artefacts from this notable Victorian shipwreck. The collections object is to also give us a snapshot into history so we are able to interpret the story of this tragic event. The collection is also archaeologically significant as it represents aspects of Victoria's shipping history that allows us to interpret Victoria's social and historical themes of the time. The collections historically significance is that it is associated unfortunately with the worst and best-known shipwreck in Victoria's history. A quantity of forty-nine (49) loose round lead shot of 7 mm diameter retrieved from the wreck of the Loch Ard. All are smooth round spheres with the same small raised square of excess lead on one face.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, loch line, loch ard, captain gibbs, eva carmichael, tom pearce, glenample station, mutton bird island, loch ard gorge, shipwreck artefact, shot, lead shot, shot towers, shot mould, colonial imports, practical metallurgy

The objects are a small sample of small gauge lead shot raised by Flagstaff Hill divers from the LOCH ARD shipwreck site in 1976. Companion pieces are in the Maritime Village collection. The three masted, iron hulled, LOCH ARD was wrecked against the tall limestone cliffs of Mutton Bird Island in the early hours of the first of June 1878. Included in her diverse and valuable cargo were 22 tons of lead shot, packed in cloth bags and wooden casks. Bulk quantities of lead shot, uniformly round balls of dull grey metal ranging from 2mm “birdshot” to 8mm “buckshot”, were routinely exported to the Australian colonies. Shot was used mostly as projectiles fired from smooth bored guns to bring down moving targets such as wild ducks and small game. It was also useful as ballast, when a dense, “pourable” weight was required to fill cavities or establish volume within a measuring container. The production of consistently round spheres of lead shot required the pouring of molten metal through a sieve and then a long drop through the atmosphere to a water filled basin for final cooling and collection. This “shot tower” process was first patented by William Watts of Bristol in 1782. His calculation of a 150 feet fall was not only to form evenly spherical droplets through surface tension, but also to provide partial cooling and solidification to each shot before they hit the water below. The value of his innovation was the minimising of indentation and shape distortion, avoiding the expense of re-smelting and re-moulding the lead. Lead shot was already being produced in Australia at the time the LOCH ARD loaded her cargo and left Gravesend on the second of March 1878. James Moir constructed a 157 feet circular stone shot tower near Hobart in 1870, with a peak annual production of 100 tons of lead shot sold in 28 pound linen bags. However colonial demand exceeded this source of local supply. The continued strength of the market for lead shot in the Colony of Victoria prompted substantial investment in additional productive capacity in Melbourne in the next decade. In 1882 Richard Hodgson erected the 160 feet round chimney-shaped Clifton Hill shot tower on Alexandra Parade (VHR H0709) and in 1889 Walter Coop built the 160 feet square tower-shaped Melbourne Central shot tower on La Trobe Street (VHR H0067). At its peak, the Coop Tower produced 6 tons of lead shot per week, or 312 tons per annum. The shipwreck of the LOCH ARD is of State significance – Victorian Heritage Register S417 Flagstaff Hill’s collection of artefacts from LOCH ARD is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. It is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417). The collection is significant because of the relationship between the objects, as together they have a high potential to interpret the story of the LOCH ARD. The LOCH ARD collection is archaeologically significant as the remains of a large international passenger and cargo ship. The LOCH ARD collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The collection is also historically significant for its association with the LOCH ARD, which was one of the worst and best known shipwrecks in Victoria’s history. A quantity of 2mm and 4mm lead shot ammunition retrieved from the LOCH ARD shipwreck site. They are concreted together by sediment. There are (6) small pieces with some single shot and a larger conglomerate of cemented shot. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, loch line, loch ard, captain gibbs, eva carmichael, tom pearce, glenample station, mutton bird island, loch ard gorge, lead shot, colonial industry, melbourne shot towers, victorian metallurgy, colonial imports

Two identical Paddles - wood, brown, square shaped with wooden handle. Round dark glass disc in centre insert.Penman & Morrison 1943 D!Dpasschendaele barracks trust, aircraft landing paddles, ww2

This bottle was made by Whitall and Tatum who manufactured bottles from the early 1800's through to the 1930's. They specialised in producing chemist bottles and this particular cobalt blue bottle is on of the more rarely produced bottles. This syrup forms a cooling and pleasant addition to beverages for patients with febrile complaints, and serves to conceal the taste of saline purgatives in solution. It is made by steeping lemon juice and skin in a sugar syrup and alcohol. We are unsure of the particular chemist to whom it belonged.A fine example of a late 19th century bottle which was used and owned by a Warrnambool business.Square cobalt blue glass bottle with rounded neck and lip with round stopper with narrow section in the middle.Printed paper label with red and gold border and mainly black text, is attached to rectangular section which is indented on one side.It has a fine line through the centre of the bottle from the process of manufacturing.Label: Warrnambool Wholesale Druggists & manufacturi chemist. handwritten on label Syr Limonis. On bottom of bottle: Pat apr2 1889 W T & Co.warrnambool, warrnambool chemist, chemist bottle

Pen and ink sets were common household and business items in the 19th century and up to the mid 20th century (prior to the introduction of ballpoint pens). They would have been placed on a writing desk or table. The items here are attractive ones and would have been a relatively expensive purchase.These items are connected to the Toleman family from Warrnambool and may have been used by the donor’s father who was an accountant. These are four items:- .1 An oblong glass dish, partly rounded at the ends and with a criss-cross pattern on the base. Inside the dish, towards the ends, are two ridges for holding four pens or pencils. .2 An oblong polished black stone tray with a curved front and a ridge for holding a pen. On the oblong section are two square metal bases with four side clips on each to hold the inkwells. These metal pieces are attached to the black tray with metal screws. .3 & .4 Two glass (crystal?) cubes with a hollow inside for holding ink. The tops of the cubes are metal with circular openings. The lids are metal with metal hinges and polished black stone topshistory of warrnambool, writing implements and associated items, household items from the past

This medical / hospital instrument was used in the Tawonga District General Hospital which was built in the 1950s specifically for the increase in population due to the Kiewa Hydro Scheme.Historical: Shows the development of scientific hospital equipment. Provenance: Used in the Tawonga District General Hospital which was remote and therefore required good equipment.Used to look into the rectum. Part 1 fits into a hollow cylinder of part 2. 1. Plastic brown handle - round and shaped at end with 4 slices to form square shape for easy grip. attached to steel with protective plate long thin rod & then cylinder with covered shaped ends. 2. All steel - spoon shaped handle on angle to hollow cylinder wider and shaped into hollow cylinder - bottom cut cross section on angle.11AQ - on part 1. on steel between protective plate and wooden handle 11AQ - on part 2. across tip of handle DOWNS DA-001-01-Y length ways on handlemedical instrument. hospital equipment. mt beauty. tawonga. rectum.

Used from the mid 1920s to mark timber so that it could be cut with a saw. It was an essential tool for carpenters.Used by Alan Tyers who worked for the State Electricity Commission of Victoria on the Kiewa Hydro Electric Scheme.Carpenter's essential equipment. Used for marking timber so it can be cut with a saw. Wooden screw on the side allows the square wooden block to slide along the length of wood which is almost square at the end but with 2 flat sides and 2 rounded sides. Plated with 2 strips of brass on the square block. Sold for 1/3 in the 1920s. There is a nail through one end. carpenter, cabinet maker, secv, tool, marples, marking gauge

This medallion was awarded by the Commissioners of the Warrnambool Industrial & Art Exhibition to ten boys from the Kew Asylum who sent handmade items (basketware, matwork etc ) for display at the Education Court of the Exhibition. The Warrnambool Industrial & Art Exhibition, held in Warrnambool from December 1896 to March 1897, partly to commemorate Queen Victoria's Diamond Jubilee, was a signal event in Warrnambool's history, with one report suggesting that over 70,000 people attended the various activities held over these months. These included concerts, operas, displays, business stands, sporting events and competitions. The earliest surviving voice recordings made in Australia were produced in Warrnambool at this Exhibition and there were various other 'firsts'. The medallion awarded to the boys at the Asylum for the high quality of their work, was made by the Melboune firm of Stokes and Sons who had a stall and machinery at the Exhibition and made small souvenir Exhibition coins on the spot for visitors to buy. As well as the gold medallion the boys were also given by the Commissioners some small souvenirs to the total value of 12 shillings. This medallion is of great historical value as it is a precious and rare memento of the 1896-7 Warrnambool Industrial & Art Exhibition, an important event in Warrnambool's history..1 A round gilt-bronze medallion with a bust image of Queen Victoria and lettering on one side and a laurel wreath and lettering on the other side .2 A square black box with a metal hinge and clasp. The inside is lined with dark blue satin and silk and has a sunken area to hold a medallion. The maker's name is printed in gold lettering on the inside top of the lid.Warrnambool Industrial & Art Exhibition 1896-7 Diamond Jubilee Awarded to Idiot Asylum Kew For excellence of Workmanship Basket & Matwork & Photos of Asylum Stokes & Sons Medallists Melbournewarrnambool industrial & art exhibition, kew asylum medallion, medallion, 19th c exhibition warrnambool, warrnambool, warrnambool history

This is an army officer’s hat from the Australian Army. It dates back to the 1940s before the word ‘Commonwealth’ was deleted in 1949 from the name of the military forces. The Australian Army has used the rising sun emblem in its official insignia since the early 1900s. The owner of this hat is not known. This hat has no known local provenance but is retained for display purposes.This is a khaki hat with an oval padded crown and a rounded peak. The top has four metal eyeleted air holes. The badge on the hat has the Rising Sun emblem. There is a brown leather strap round the brim attached by metal buttons. The inside of the hat has a blue cloth lining with a square of cellophane. There is a grey leather internal band in the peak section overlaid with black material. There is some slight staining inside the hat. Australian Commonwealth Military Forces

This wedding dress came from the estate of Ena Heazlewood. Born in Warrnambool in 1920 Mary Josephine (Ena) Todd was a hairdresser at Josephine’s Salon in Warrnambool. In 1942 she married a Warrnambool man, Jack Heazlewood, a stoker on the H.M.A.S. Sydney at the time. She was wearing this wedding dress. The dress was also worn by two other brides – Ena’s sister-in-law. Mavis McDonald when she married Jim Heazlewood in December 1942 and her sister Rita Todd when she married Bill Kane in 1947 (the bodice of the dress was altered for Rita’s wedding). The photograph shows the wedding of Field James (Jim) Heazlewood and Mavis Marie McDonald who were married on 23/12/1942This dress is of of some significance as it is not only a lovely example of a 1940s wedding dress but it has local provenance, being worn by a Warrnambool person, Ena Todd when she married another Warrnambool identity, Jack Heazlewood in 1942. This is a white lace dress with a fitted bodice, a square neckline and a lace band at the waist edged with satin. The dress has set-in long sleeves with a press stud clips at the wrists. The waist at the back has a loose band of lace material. The skirt is slightly flared and is floor length at the front with a cotton net frill edging, now slightly tattered. The dress at the back has a wide rounded train with a net frill edging. The side ends of the train have inserted lace panels. The dress is slightly yellowed with age. vintage clothing, todd & heazlewood families, warrnambool

This photograph shows the Echuca Moama bridge crossing the Murray River in the early 1970's. This photograph shows the Echuca Moama bridge in the early 1970's. It shows one of the rounded arches on the bridge. The rounded arches were the original arches and were at one stage replaced by square arches, but then replaced again by rounded arches.A rectangular coloured photograph of the Echuca Moama bridge taken from the Victorian bank, sometime in the early 1970's. One round bridge arch can be seen and a tall electricity pole can also be seen on top of the bridge. The vegetation on the Victorian bank is short and cropped. Some dead branches lie on the ground in the left foreground.There are none.echuca moama bridge, murray river, victorian bank

Articles, some with photos. Subjects include President's message, Eltham-templestowe intersection, indoor recreational centre, Bridge over Watsons Creek, town square, list of councillors, forward planning, recreational faciliaites including Eltham town park, Hurstbridge hall, roads, community welfare services, eltham Community and reception centre opening, amenities for youth, concrete bridge at Arthurs creek and Mitton's Bridge at St Andrew's Newsprint, 4 pages harry gilham collection, intersection, round-about, recreation, recreational centre, watsons creek, town square, councilors, newsletter, planning, parks, hurstbridge hall, community welfare service, roads, eltham community and reception centre, youth, skateboard track, mitton's bridge, arthur's creek, fitzsimons lane, main road, road construction, rondabout

These relate to the WW2 and Post War service of VX112283 "Keith Charles Buckley" - Major1. Photo of an Australian Major of RA Sigs - in BCOF signing a document. Beside him is an Australian soldier and an Asian Gentleman. Behind them are cups and saucers. On the table is a round stamp or blotter. The Major is wearing Campaign medals. 2. Photo of the same conference from a different angle. 2 Australians, 5 Asian gentlemen. The Major and the mature Asian Gentleman are signing documents. The Australians are in winter dress. The civilians are in suits with ties, The table is a large square one with turned wooden legs.photos, ww2, signing of documents

Badges used to identify units within the RACT (Royal Australian Corp of Transport).1. Square material blue patch with red round borders and yellow writing and picture of a vehicle. Other side, white felt. 2. Round light blue patch with brown spoked boat wheel. White writing and inside wheel picture of white crane vehicle on red background and white machine on blue background.1. Embroidered "Amphibious Transport RACT"and "41 PL". 2. Embroidered "Melbourne Water Transport RACT".passchendaele barracks trust collection., ract, cloth badges

Eight-day clock from a Kittyhawk aircraft flown by Flight Lieutenant Ian A. Lyons. Part of the Flight Lieutenant Ian A. (Joe) Lyons MBE Collection. See catalogue No 5374P for his service record.Analogue eight-day aircraft clock with square mounting and round face. Numbers 3, 6, 9 and 12 and hands are white in colour with a black background. A winding knob is located on the bottom left-hand corner. There are two threaded holes on opposite corners for attachment to the control panel of an aircraft. The casing is made from bakelite.Stamped on a plate on the back of the clock: 'ORDER No. AC26186, MFR'S. PART No. 1776, SPEC. No. 94-27970, SER No. AC42-17865, ELGIN NAT'L WATCH CO.'eight-day clock, aircraft clock, kittyhawk aircraft, flight lieutenant ian a. lyons

This is an East German cap which presumably would have been worn by a German airman. It is a fairly recently made piece, dating to the 1980’s or 90’s.This cap has historic significance as a piece of East German airforce uniform. Itnis a fairly recently made piece, dating to approximately the 1980’s-90’s. It is also in excellent condition.A grey fabric peaked cap with fine blue trims and a black plastic head cover. There is a silver fabric rope looped around a silver metallic stud on either side if the cap. Attached to the front/centre of the cap is a metallic ornament depicting the east German logo in red and silver, surrounded by a silver wreath and wings. Above this is a silver metallic ornament depicting a propeller surrounded by two curved pieces of foliage. There is a faux leather strap on the interior and a square of lighter grey fabric stitched into the underside of the cap. This contains inscriptions. There is also a round yellow sticker on the interior side of the plastic head cover. This also contains an inscription.Inscriptions on the grey square of fabric on cap interior: NVA 55 1856 T Inscriptions on yellow sticker on cap interior: HA.05military, airforce, german, cap, hat, east german

Presented to John Waugh whose son believed to be William John Waugh No 307 who was KIA on Gallipoli Peninsula 2.5.1915Badge, round silver coloured with a central square shape with reddish background.On front, “ Sailors Soldiers Assoc of Victoria”, On the rear, “8573 John Waugh”badges, fathers association

Vol I . Hard cardboard cover, red buckram, gold print on front & spine. Gold print round seal on front. 516 cut, plain, white, slightly glossy pages. Black / white photos & maps. Bookshop sticker on front end paper, title page: “D Hope, Bookseller, Devonport, Tas” Handwritten in black ink on front end paper: “Henry J Curwen Devonport Feb 27 1915” Handwritten in blue ink on title page: “Mary P Clancy”book, the times, 1914

Items in the collection re Ian McLeod RWAFF, refer Cat No 2262.2 for service details..1) Badge, Cloth, green with "Rhodesia" sewn on, light blue. .2) Same as .1) .3) Shoulder epaulete, kahki, with 3 rank insignia and button with "RWAFF" brass badge attached with working "CCR. RWAFF" .4) Shoulder epaulete, kahki with 3 rank insignia and button with "RWAFF" .5) Badge cloth, round black and white with gold "immobile vad". .6) Badge, cloth square yellow with black spider.5) “G Glasgow 14587”badges, epaulettes, uniforms, collection