Showing 590 items
matching seams
-
Bendigo Historical Society Inc.
Clothing - AILEEN AND JOHN ELLISON COLLECTION: WINDCHEATER. KANGAROO FLAT TECHNICAL SCHOOL, Late 1970s
Cotton and polyester burgundy fleece fabric with yellow/gold school logo on left chest. Raglan sleeves with ribbed cuffs. Ribbed band at lower edge and neckline. V shaped panel at neck line centre front – 9 cm deep. No side seams in body of garment. Tubular knit fabric.Tag Exacto The Authentic Windcheater Size 22 Chest 110 cm 44costume, male, school wear -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Infant feeding bottle, Mellin's, Mellin's Food, c. 1900 to 1940
Feeding bottles of this shape were on sale from 1900 for about 40 years. The Allenbury feeder devised by Allen & Hanburys, U.K. was the first of this type. They were easier to clean and the mild flow was easier to regulate. Source: Kevill-Davies, Sally. "Yesterday's Children: The Antiques and History of Childcare" Mellin's Food was a company which produced patent milk solids and cereal preparations from c1860s. English food chemist Gustav Mellin developed an infant food formula in the late 1860s, dubbed Mellin's Food, which became the most widely used mass produced food at this time. Source: Andrew Smith (2013). "Baby Food". The Oxford Encyclopedia of Food and Drink in America. ISBN 9780199734962. Glass feeding bottle. Bottle is loosely boat shaped with flat base, and neck and openings at either end. There is a small flattened area on the base to allow the bottle to balance. Writing embossed into bottle reads 'MELLIN'S FOOD' and 'TABLE SPOONS'. Graduated markings for months of age and tablespoons. Visible join seams on bottle.infant feeding, infant care -
South Gippsland Shire Council
Wall Hanging
Woven wall hanging featuring 5 panels showing a country scene of rolling hills, sky and clouds. Woven in heavy wool of greys, geeens and pinks. The clouds feature fluffy tufts of wool. Hanging on white dowel curtain rod. Hem of each tapestry contains a heavy weight inserted in the seam. -
Flagstaff Hill Maritime Museum and Village
Weapon - Cannon Ball, Late 18th to 19th centuries
This cannon ball could have been made as ammunition to be shot from a 24-pounder gun, perhaps a deck cannon or Carronade on a sailing ship. It is similar to those used by both British and French navies from the late 18th and 19th centuries. The iron cannon ball shows the casting mark around its circumference made by the mould during the casting process. The cannon ball is an example of ammunition used during naval conflicts in the late 18th and 19th centuries. It was made for cannon or Carronade similar to those in the collection of cannon at Flagstaff Hill Maritime Museum.Cannon ball; a heavy black iron ball with a casting seam around its circumference. The surface is shiny with many pits and has slight corrosion. There are several chips including one large deep chip and a small, crescent shaped chip. The cannon ball’s size is similar to a cast iron 24-pounder shot.flagstaff hill maritime museum and village, warrnambool, great ocean road, shipwreck coast, artillery, ammunition, cannon ball, shot, 24-pounder, 24 pdr, deck cannon, ship cannon, military, cannon, gun, iron ball, moulded ball, naval gun, deck gun, navy, carronade, war, maritime weapon, cast iron, mould -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, Mid-to-late 1800s
This olive green bottle was handmade by a glassblower and is the typical shape of a ‘gallon’ type liquor bottle, which has the capacity of one-sixth of an imperial gallon, about 750ml. It was made around the mid-to-late 1800s. The bottle was recovered from an unnamed shipwreck in the coastal water of Victoria. It is part of the John Chance Collection. The elongated bubbles in the glass are likely from the glass being blown into a mould. Glassblowers made bottles like this one by blowing into a long metal pipe or reed with a blob of molten glass at the end of it. The shape of the glass would be blown out to fit into the shape of the mould. Once it set, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck and another tool to finish the base. The bottle would be cracked off the end of the glassblower’s pipe and a blob of molten glass would be added to the top to form the mouth and lip of the bottle. The seal was usually a cork, often held in place with tape. Although the bottle is not linked to a particular shipwreck, it is recognised as being historically significant as an example of bottles imported for use in Colonial Victoria in the mid-to-late 1800s. The bottle is also significant as it was recovered by John Chance, a diver in Victoria’s coastal water in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Bottle, dark olive green glass, tall thin Gallon type. Mouth is applied roughly, lip is straight and narrow. Body has no visible seams; tapers gently inwards to base. Concave base is deep and has a pontil mark. No inscriptions. Handmade bottle has elongated air bubbles and imperfections in glass.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, gallon bottle, handmade, mouth blown, pontil mark, blown bottle, liquor bottle, 19th century bottle, collectable, olive glass, green glass, mould, 1800s bottle -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, c. 1840s - 1870s
This brown glass bottle has been handmade from about the 1840s to 1870s. The bottle, possibly used to store ale or soda or mineral water, was found in the coastal waters of Victoria. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe into the molten glass blob at the end of the pipe. The glass was blown out to fit into the shape of the cylindrical dip mould. Once it hardened, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck while carefully using a tool to hold the base. The base may have been part of the dip mould, otherwise, a 'ponty' tool would have been used to flatten the base. A tool would have been used to cut off the bottle from the blowpipe and a piece of soft glass would be added to the mouth to then formed into the double collar lip. Bottles like this would usually be sealed with a cork, which may have been held in place with wax or wire and tape. Although this bottle is not linked to a particular shipwreck, it is recognised as a historically significant example of handmade, 1840s to 1870s beverage bottles imported for use in Colonial Victoria. The bottle is also significant for its association with John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several shipwrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, brown glass, wide body, cork-top style. Applied double collar, straight upper, flared lower. Short bulbous neck, wide shoulder with seam, body tapers inward to base. Shallow base with wide uneven heel. Bubbles, disculouration and creases in glass. Sediment in bottle. Inscription in base.Embossed in base [indecipherable]flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, collectable, bottle, dip mould, soda bottle, ale bottle, beverage bottle, brown glass -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, c. 1840s - 1870s
This green glass bottle has been handmade from about the 1840s to 1870s. The bottle, possibly used to store ale or soda or mineral water, was found in the coastal waters of Victoria. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe into the molten glass blob at the end of the pipe. The glass was blown out to fit into the shape of the cylindrical dip mould. Once it hardened, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck while carefully using a tool to hold the base. The base may have been part of the dip mould, otherwise, a 'ponty' tool would have been used to flatten the base. A tool would have been used to cut off the bottle from the blowpipe and a piece of soft glass would be added to the mouth to then formed into the double collar lip. Bottles like this would usually be sealed with a cork, which may have been held in place with wax or wire and tape. Although this bottle is not linked to a particular shipwreck, it is recognised as a historically significant example of handmade, 1840s to 1870s beverage bottles imported for use in Colonial Victoria. The bottle is also significant for its association with John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several shipwrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, dark green glass, matt surface, cork-top style. Applied double lip: straight upper and flared lower. Slight bulbous neck, shoulder seam, body tapers inwards towards base and has a rippled surface. The uneven base has a thick heel and is concave with small pontil mark.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, collectable, bottle, dip mould, soda bottle, ale bottle, beverage bottle, green glass bottle -
Bendigo Historical Society Inc.
Clothing - AILEEN AND JOHN ELLISON COLLECTION: LADIES PINK NYLON GLOVES -''BRACELET'' LENGTH
Clothing. ''Dusty pink'' nylon gloves- ''Bracelet'' length.Two rows of zig zag stitching, one at either side of glove, holds a 3 mm wide elastic, 10 cm long (one on a side seam, and one just above the thumb). one cm wide gussets of fabric in between each finger.DENTS, NYLON, MADE IN AUSTRALIA.costume accessories, female, ladies pink nylon gloves -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Doctor's theatre gown worn by Dr Mitchell Henry O'Sullivan, c. 1930s
The wearing of gown became mandatory in all operating theatres from the 1900s and in 1914-1918 during the Spanish flu epidemic. During the 1930s gowns were worn when attending polio patients. From 1945 onwards, midwifery hospitals required all staff working in labour wards, premature nurseries, and special care (observation nurseries) to wear gowns when in contact with mothers or babies. During the 1950s the gown regime helped to combat the spread of golden stph in midwifery hospitals. Dr Mitchell Henry O'Sullivan worked in the Victorian country town of Casterton as a general practitioner from 1919 until his death in 1977. He also practiced obstetrics. His son, Dr David More O'Sullivan donated his obstetric bag and its contents to the College in 1999. The bag and contents are a unique time capsule of the type of instruments and pharmaceuticals used in the inter-war period.Cotton gown with high round collar and long sleeves. Gown is made in two sections with a centre doubled seam. The collar is made to button at the neck, but the button on this gown is missing. Wrists of gown are fastened with flat mother of pearl buttons. Open at back with six ties. Laundry tag taped to right side of gown.surgery -
Whitehorse Historical Society Inc.
Clothing - Petticoat, c1920
Made by Anna Helena Zerbe (Girlie) for her trousseau for her marriage to clarence Pratt C1920.Cream tussor silk petticoat with round neck and armhole crocheted in cream silk. Scalloped hem also crochet with cream silk. Four embroidered motifs in scallops. Cream embroidered motif at neck, gathered at hips side seams. Part of a Trousseau Set - See NA2736 nightgown and boudoir jacket and NA2738 bloomerscostume, female underwear -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Clothing - Clothing,Girl's Blouse, lace,voile lining, c1900
This girl's white long sleeved blouse made from lace,voile and net and was probably made for a special occasion c1900. The delicate needlework flowers on the net insert on front of blouse and the over sleeves exhibit a high standard of skill. The fine pintucks on the front, collar and cuffs are finished by small white beads sewn around the edges. The eyes for the hooks on back opening seam are hand-sewn The women of the early settler families were skilled dressmakers and made the clothes for their families as they established market gardens and farms in Moorabbin Shire This girl's blouse made from lace,voile and net is an example of the high needle work skill of the women of the early settler families in Moorabbin Shire c1900 A girl's white,long sleeved, tulle blouse,with a high collar stiffened by 4 metal wires. The tulle has pintucks front and back with inserted decorated net panels and sleeves . The long lace outer sleeves have lace edging at the cuffs. The whole blouse is lined with tulle. .The high collar has horizontal pintucks and has small white beading along top and base. The lining tulle has horizontal pintucks and beading and lace edging on the cuffs of the inner sleeves. Hooks and eyes fasten the back of the blouse and ribbon is inserted at waist to produce a flared effect over hips clothing, brighton, moorabbin, bentleigh, cheltenham, pioneers, dressmaking,lacework, craftwork, tulle, net, market gardeners, early settlers, craftwork , bentleigh, moorabbin shire , dairy farms, fruit orchards -
Warrnambool and District Historical Society Inc.
Clothing - Baby's Christening Gown, 1890
This Christening gown belonged to William Edward Housden who was born in Castlemaine in 1890 and died in Warrnambool in 1972. He served in World War One and married Lucy Knowles in 1921. It was on occasions, and still is, a common practice to make a special dress for a baby's Christening or to use a gown that has been handed down over the generations. This is a fine example of a Christening gown made for a baby 130 years ago.This is a Christening gown made of cream cotton. It is high waisted with a gathered skirt and a pintucked bodice with hand embroidered leaves and fine drawn thread work. The draw string waist opens at the back. It has long sleeves with lace and embroidered cuffs. There is lace and draw string tape around the neck. The seams have been machined.william edward housden, christening gowns -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, 1840s to 1878
This handmade black glass bottle was recovered between the late 1960s to early 1970s from the wreck of the sailing ship Loch Ard. The ship was wrecked in 1878 and its remains are located at Mutton Bird Island, near Port Campbell, Victoria and bottles of liquor were listed as part of the Loch Ard’s cargo. All glass is made from silica, which is found in quartz sand. The naturally occurring sand has impurities, such as iron, that determine the colour of the glass. Residual iron leads to green or amber-coloured glass and carbon in the sand makes that glass appear as ‘black’. A strong light behind the glass will show its colour as dark green or dark amber. This handmade bottle appears to have been made in a two-piece dip mould, with the molten glass blown into a seamless shoulder-height mould to give the body a uniform symmetrical shape and size. After the body is blown, the glass blower continues blowing free-form (without the mould) to form the shoulder and neck, then the base is pushed up with a tool, and the finish for the mouth is added with his tools. The dip mould gives the body a slightly textured surface, with the free-blown shoulders and neck being smoother and shinier. There is usually a line around the shoulder where the mould of the body meets the shoulder, and a lump or mark in the centre of the base, called a pontil mark, where the push-up tool was removed. The ship Loch Ard was built on the River Clyde in Scotland in 1873 for the prestigious Loch Line of colonial clipper ships, designed for the Australian run. It sailed from England on 1 March 1878 carrying 37 crew, 17 passengers and a diverse general cargo ranging from luxury items to bulk railway iron. On 1 June 1878, emerging from the fog and hearing too late the sound of breakers against the tall limestone cliffs, the vessel struck the southern foot of Mutton Bird Island and sank in 23 metres of water. Of the fifty-four people on board only two survived, one young male crewman, Tom Pearce, and one young female passenger, Eva Carmichael. This bottle is historically significant as an example of liquor bottles imported into to Colonial Victoria in the mid-1800s to early-1900s. The bottle is also significant for being part of Flagstaff Hill’s collection of artefacts from the Loch Ard, which is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. The collection is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417. The collection has additional significance because of the relationship between the objects, as together they have a high potential to interpret the story of the Loch Ard. The Loch Ard collection is archaeologically significant as the remains of a large international passenger and cargo ship. The Loch Ard collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The shipwreck is one of the worst, and best-known, shipwrecks in Victoria’s history.Bottle, black glass wine bottle with contents. Glass has ripples, crease lines and side seams. The mouth has a seal in place. The applied lip is wide. The base has been pushed-up base and has a pontil mark. Handmade with a ridge in the body around the base of the shoulder. The bottle has a white sticker.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, loch ard, mutton bird island, eva carmichael, tom pearce, john chance, bottle, antique bottle, bulge neck bottle, handmade, dip mould, mouth blown, pontil base, blown bottle, liquor bottle, ale bottle, black glass, black bottle -
Bendigo Historical Society Inc.
Photograph - PORTRAIT OF A MAN
Small portrait of a man seated on a chair with his right arm resting on a table? He is wearing a three piece check suit with a watch chain. He has a beard. His trousers have a dark insert down the outer seam. Photographer's name printed on the front in gold and the photo also has a gold border.Johnstone, O'Shannessy & Co., 3 Bourke St. East, Melbournephotograph, portrait, male, portrait of a man, johnstone o'shannessy & co. -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Infant feeding bottle with thermometer, 'Kuwa', Germany, c. 1925
The neck of this bottle is quite wide and would have been fitted with quite a large teat. The use of an inbuilt thermometer on this bottle by the manufacturers, Kuwa, was quite innovative.Cylindrical glass feeding bottle, with calibrations for 1 to 8 (ounces) and 50 to 200 (mls). There is a vertical recess in centre front of the bottle, which contains a thermometer. There are two vertical seams in the glass, and a longitudinal bubble in the glass near the neck. Embossed on the neck of the bottle: "Kuwa" and "Made in Germany" on the lower front of bottle near the base."KUWA"; "MADE IN GERMANY"infant feeding -
Bendigo Military Museum
Uniform - TROUSERS, ARMY, Australian Defence Industries, 1970
Trousers - khaki, wool serge fabric, plastic buttons, five button fly, fob pocket, two side pockets, one back pocket with button down flap. Lining cotton and polyester fabric. One manufacturers label on lining of back pocket with black print information. Mending patch attached to label.Cotton label information - black ink print. "CONWAY BROS PTY LTD/ ^/ CLASS 8405-66-025-6187/ size & waist 305/ Dry clean only/ Re=press on original seams/ Creases set by Si-ro-set/Mending Patch attached."uniform, army, battle dress trousers -
Beechworth RSL Sub-Branch
Shirt Service Dress “S tens”, July 2007
Standard summer dress shirt indicative of that worn by sailors of all rank post WWII until present time. Summer, tropical dress shirt white worn by from post WWII to present day. Shirt was worn on service duty by CPO (R’td) Craig Duff; This style shirt is still in use by the RANShirt Service Dress White short sleeved with two breast pockets; Insignia embroided Naval Police Coxswain on the right sleeve; shoulder patch embroided in navy blue cotton with the word Australia embroided on both sleeves, Insignia Rank Petty Officer, buttoned down the front.Inside seam right hand side there is laundry instructions label measuring 45mm x 50mm; Collar label 45mm x 68mm/ DNJ9CC/ July 2007/ 8405-66-051-8334/ SIZE 40,/ NAME/ Service No., 65% polyester/ 35% viscose Rayonshirt short sleeved white, shirt white -
Kiewa Valley Historical Society
Tablecloth - CWA
The Country Women's Association of Victoria was a popular widely known organisation throughout Australia. The CWA aimed to improve health, welfare and education for women and children in the country.Each town / area in the Kiewa Valley had an active CWA. The Tawonga branch commenced in Feb. 1946 and often combined activities with other branches in the Kiewa Valley. One of their activities may have been to play cards.Green cotton square tablecloth for a fold-up card table. It has an yellow with a little bit of white embroidered circle / emblem in one corner. Inside the circle is "Victoria' and CWA (on top of each other as per the CWA emblem.) The edges are hemmed and a seam runs around all edges so that the square sits correctly on the table.Victoria CWAcountry women's association, tablecloth, community, volunteers, women, charity -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, c. 1840s - 1870s
This green glass bottle has been handmade from about the 1840s to 1870s. The bottle, possibly used to store ale or soda or mineral water, was found in the coastal waters of Victoria. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe into the molten glass blob at the end of the pipe. The glass was blown out to fit into the shape of the cylindrical dip mould. Once it hardened, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck while carefully using a tool to hold the base. The base may have been part of the dip mould, otherwise, a 'ponty' tool would have been used to flatten the base. A tool would have been used to cut off the bottle from the blowpipe and a piece of soft glass would be added to the mouth to then formed into the double collar lip. Bottles like this would usually be sealed with a cork, which may have been held in place with wax or wire and tape. Although this bottle is not linked to a particular shipwreck, it is recognised as a historically significant example of handmade, 1840s to 1870s beverage bottles imported for use in Colonial Victoria. The bottle is also significant for its association with John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several shipwrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, green glass, cork-top style. Applied mouth, lip has double collar; wide upper and flared lower. Vertical bubble in bulbous neck. Long diagonal discolouration along neck. Body has ripples around it and no seams. Heel is thick, base is shallow, has bubbles and is very uneven on a flat surface.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, collectable, bottle, dip mould, soda bottle, ale bottle, beverage bottle, green glass bottle -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, c. 1840s - 1870s
This broken black glass bottle has been handmade from about the 1840s to 1870s. The bottle, possibly used to store ale or soda or mineral water, was found in the coastal waters of Victoria. It is part of the John Chance Collection. Black glass is one of the oldest bottle colours and dates back to the early 17th century. In the 1840s to late 1870s black glass bottles were mainly used for liquor and ale. All glass is made from silica, which is found in quartz sand. The naturally occurring sand has impurities, such as iron, that determine the colour of the glass. Residual iron leads to green or amber coloured glass, and carbon in the sand makes that glass appear as ‘black’. A strong light behind the glass will show its colour as dark green or dark amber. This handmade bottle appears to have been made in a cylindrical dip mould. The molten glass was blown into the mould to give the body a uniform symmetrical shape and size. After the body was blown, the glassblower removed it from the mould and formed the shoulder and neck by free-blowing the glass. The base was pushed up with a pontil tool that gave it the concave shape. The finish for the mouth was added by hand to form the collar. The mould gives the body a slightly textured surface. There is usually a line around the shoulder where the mould meet the base, and a lump or mark in the centre of the base, called a pontil mark, where the push-up tool was removed. Although this bottle is not linked to a particular shipwreck, it is recognised as a historically significant example of handmade, 1840s to 1870s beverage bottles imported for use in Colonial Victoria. The bottle is also significant for its association with John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several shipwrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, black glass, 'gallon' style. Applied lip, straight collar with circular lines from being hand moulded. Shoulder seam, body tapers inwards towards base. Heel has varied width, shallow base has small pontil mark. Mouth is chipped. Glass is discoloured and has uneven surface and encrustations. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, collectable, bottle, dip mould, soda bottle, ale bottle, beverage bottle, black glass -
Bendigo Historical Society Inc.
Clothing - FAY BRYANT COLLECTION: SUTEX MEN’S WOOLLEN CARDIGAN, 1970s
Pure wool, navy blue men’s cardigan. Five navy blue buttons. One bound pocket on each side front. A 10.5cm wide band of woven pattern on each side front. Fine knit of heavy density. Set in sleeves with a 2cms wide fine knit cuff. Machine stitched button holes. Overlocked seams.Sutex ® Quality Knitwear. Made in Australia. Size 18 to fit 100cm. PURE WOOLcostume, male, cardigan -
Whitehorse Historical Society Inc.
Wedding Dress, 1978
Wedding gown worn by Dianne Warren for her wedding in 1978, daughter of Frances Warren1978 White wedding dress in a fibre material with all over pattern embossed full length with train, long sleeves coming to a point, 5 buttons and loops fastening. Curved shape neckline, high waist, curved at front, seams over bust, five panel skirt. 34 covered buttons and loops down back.costume, female ceremonial -
Bendigo Historical Society Inc.
Clothing - AILEEN AND JOHN ELLISON COLLECTION: MID BLUE JACKET BY ZANKO: PART OF ENSEMBLE WITH 11400.522
Mid blue waist length long sleeved jacket to be worn over 11400.522 11cm fold over collar that extends to waistline with crossover front and scalloped lapels. Right over left crossover (3.5cm) fastened with one fabric covered 2.4cm button with centre circle and narrow edge. Lapels have decorative cut out lace motifs attached – match lace across midriff of dress. Ten motifs evenly spaced around collar. Front pieces have vertical darts from hem under bust. Back of bodice has two pieces with centre seam. Vertical dart on either side of the centre seam. Unlined. Machine made. Kimono sleeves. Three quarter length. Gusset under each arm 12 x 13cm. Part of ensemble with 11400.522.Created by ZANKO of Melbournecostume, female daywear, coat -
Greensborough Historical Society
Container - Bottle, John Sutherland & Sons, Pickle bottle. John Sutherland & Sons, 1929-1933
This bottle holds one imperial pint. The manufacturer John Sutherland & Sons began production in Melbourne in 1885 and ended production in the 1970s. This bottle was made with a 3 piece mould. 2 pieces for the bottle proper and a third for the base. The side mould seams extend right through the lip, so this was not applied separately. The type of A G M mark on the bottom indicates it was made during the 1929 to 1933 period. It displays some stretching in the glass on the neck as it was taken from the moulds whilst still somewhat plastic, not having cooled enough. Overall the bottle in excellent condition.Clear glass bottle, embossed inscription, AGM mark on base.Embossed inscription: "John Sutherland & Sons Pty Ltd Melbourne Pickles"glass bottles, john sutherland & sons, pickle bottles -
Bendigo Historical Society Inc.
Clothing - WEDDING DRESS
Wedding dress cream coloured full length satin with long sleeves and a train. Sleeves gathered at the shoulder with lily pointed at the wrist. Sleeves have six fabric covered decorative buttons with three metal press studs underneath. Bodice has curved midriff panel with four pintucks defining the panel. Bodice tightly gathered at top of midriff panel. Side opening with plackett with five press studs. Two flounces at LHS from a single piece of fabric folded in half, stitched to side seam just below the sleeve(34cms). A single tie on LHS stitched to side seam at waistline (29cm). Back of the bodice has an opening from the top(10cm) fastened at neckline by two covered buttons and a hand stitched loop. Nine covered decorative buttons at centre back.Peaked collar front and back in two parts (10cm at front peaks).Front and back have centre panel with two panels shaped at the hipline. Back centre panel extends to form a long train. Length waist to centre front hem 102 cms.Length waist to centre back hem 187 cms to form train. Handkerchief hem at lower hemline. Internal seams have ragged edges.costume, female, wedding dress -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, 1870s-1910s
This clear, green tinged, Half Whirley (or Whirly) salad oil bottle has been handmade by a glassblower from 1870s-1910s. A bottle with such elaborate decoration would have been sought after as there was no need to decant the sauce into another jug or bottle to make it acceptable for table service. It is possible that this bottle was recovered from the Loch Ard, wrecked in 1878. A diver found the bottle on a shipwreck in the coastal waters of Victoria about 100 years from when it was made. The diver who found this bottle has recovered objects from several different shipwrecks between the late 1950s and early 1970s. A sizeable proportion of those objects was from the wreck of the famous clipper ship Loch Ard. This salad oil bottle may very well have been amongst that ship’s cargo. It is part of the John Chance Collection. A paper titled ‘Glass Bottles from the Loch Ard Shipwreck (1878): A Preliminary Study’ by Iain Stuart, (published in Australian Historical Archaeology, 9, 1991) included a study of twelve salad oil bottles from the wreck of the Loch Ard. The bottles were of this same Half Whirley design (half meaning that it was Whirley on the upper half but not on the lower half of the body), as well as the same colour and size. A diagram of one of these twelve bottles matches the bottle in our collection. The paper mentions that eleven of the twelve bottles have a number on their base, just as this one has. It is estimated that foreign and salad oil bottles totalled four percent of all of the bottles carried as cargo on the ship. The Half Whirley bottle has side seams from below the lip to the base, indicating that the bottle was made in a two-piece mould that included the heel, body, shoulder and neck. The fancy ‘whirly’ twist pattern and panelled sides would have been cut into the mould’s inner surface. The uneven thickness of the ridge around the base comes from adding a separately moulded and embossed base after the bottle was removed from the mould. The applied finish (mouth and lip) was also added to the bottle. The elongated bubbles in the glass are evidence of the glass being mouth blown into the mould, thus forming the shape and pattern from the inside shape of the mould. The bottle probably had a glass stopper with a round top and wedge-shaped shank with a ground surface, allowing the bottle to be re-sealed. The ring between upper and lower lip allows the closure to be sealed and anchored. The embossed numbers are either “133” or “833” and may represent a particular bottle pattern, manufacturer or filler. Although the bottle is not currently linked to a particular shipwreck, it is recognised as being historically significant as an example of bottles imported for use in Colonial Victoria in the mid-to-late 19th century. This whirley salad oil bottle is matches the whirley salad oil bottles recovered from the Loch Ard in the 1990s, adding depth of interpretation to the array of salvaged Loch Ard artefacts in Flagstaff Hill’s collection. The salad oil bottle is an example of the type of food condiment containers that were used in Victoria’s early days. The bottle is also significant as it was recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks, including the Loch Ard, have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Bottle; glass Half Whirley salad oil bottle, green-tinged, with some opalescence. Handmade, elaborately decorated bottle with round neck and base, and five-sided body. Applied double lip; straight upper, flared lower. The lower neck and shoulder have twisted spiral whirley patterns in the glass. The body tapers slightly inwards towards the base. It has five plain panels, one wider than the others. Side seams run from below the lip to the heel. The heel of the bottle is uneven in width, height and density where it joins the body of the bottle. The base is not level. Embossed characters on base. Glass has elongated bubbles towards the base and orange-brown sediment inside, on one side. Embossed "133" or “833” (the first character may be an “8”) flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, 19th century bottle, collectable, bottle, green glass, tinged green, two piece mould, food bottle, oil bottle, salad oil bottle, whirley, whirly, half whirley, condiment bottle -
Flagstaff Hill Maritime Museum and Village
Clothing - Apron, circa late19th to early 20th Century
An apron is an outer protective garment worn over clothes to cover the front of the body. In Victorian and Edwardian times, women were using aprons for both utility (they were easier to wash than dresses) and fashion and women's magazines and pattern companies were offering patterns to allow women to be to sew their own aprons at home. There are different styles of aprons including bib aprons, waist or half aprons, pinafores, tabards and pinner aprons. The word "apron" comes from the old French word "naperon" which means a napkin or small tablecloth. This apron is one of two similar aprons that were donated from the estate of Susan Henry nee Vedmore (1944 - 2021). It is in very good condition and appears to be more decorative (and possibly used only on special occasions) rather than everyday wear. Susan's family (Harold and Gladys Vedmore) immigrated to Australia from Wales in 1955 and settled in Warrnambool. Susan was well known in the Warrnambool community for her work supporting children and families across the district - particular those with disabilities, or those who were homeless, unemployed or isolated. Susan was the founding trustee of the "Vedmore Foundation" - a Warrnambool philanthropic trust set up in 2010 to support a range of charitable and not-for-profit causes by providing grant assistance. In 2021, she was awarded a Medal of the Order of Australia for services to the community.This item is an example of clothing worn by working women in the late 19th and early 20th centuryShort white cotton apron featuring gathering along the waist band and a gathered frill with scalloped edging along the bottom. The scalloped trim is repeated on the edge of a single pocket on the right hand side. It has ties attached to both ends of the waist band and the main body of the apron is made of of three rectangular pieces of cotton joined with french seams.warrnambool, great ocean road, textiles, lady's garment, apron, parlour apron, waitress apron, half apron, waist apron, handmade, domestic clothing, domestic work, vedmore foundation, susan henry oam -
Flagstaff Hill Maritime Museum and Village
Clothing - Apron, circa late19th to early 20th Century
An apron is an outer protective garment worn over clothes to cover the front of the body. In Victorian and Edwardian times, women were using aprons for both utility (they were easier to wash than dresses) and fashion and women's magazines and pattern companies were offering patterns to allow women to be to sew their own aprons at home. There are different styles of aprons including bib aprons, waist or half aprons, pinafores, tabards and pinner aprons. The word "apron" comes from the old French word "naperon" which means a napkin or small tablecloth. This apron is one of two similar aprons that were donated from the estate of Susan Henry nee Vedmore (1944 - 2021). It is in very good condition and appears to be more decorative (and possibly used only on special occasions) rather than everyday wear. Susan's family (Harold and Gladys Vedmore) immigrated to Australia from Wales in 1955 and settled in Warrnambool. Susan was well known in the Warrnambool community for her work supporting children and families across the district - particular those with disabilities, or those who were homeless, unemployed or isolated. Susan was the founding trustee of the "Vedmore Foundation" - a Warrnambool philanthropic trust set up in 2010 to support a range of charitable and not-for-profit causes by providing grant assistance. In 2021, she was awarded a Medal of the Order of Australia for services to the community.This item is an example of clothing worn by working women in the late 19th and early 20th century Long white cotton apron featuring gathering along the waist band and a gathered frill with scalloped edging along the bottom. The scalloped trim is repeated on the edge of a single pocket on the right hand side. It has ties attached to both ends of the waist band and the main body of the apron is made of of three rectangular pieces of cotton joined with french seams.warrnambool, great ocean road, ladies' garment, apron, half apron, waist apron, domestic clothing, domestic work, parlour apron, waitress apron, handmade, sewing, vedmore foundation, susan henry oam -
Flagstaff Hill Maritime Museum and Village
Clothing - Child's Dress, 1910's
This child's white linen day dress was worn by Robert Barnard, son of Mrs W N Barnard of Portland, when he was a young child.This child's dress is representative of child's fashion of the 1910s.Child's white linen day dress; hand-sewn dress with pleated skirt, short sleeves and a plain bodice. The neckline and sleeves have a rick-rack braid and crochet trim. The back closure has four buttons, a hook closure and a short back seam. c. 1910. Worn by Robert Barnard son of Mrs W N Barnard of Portland. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, robert barnard, mrs w.n. barnard, w.n. barnard of portland victoria, child’s dress 1910’s, 1910, child's dress -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, c. 1840s - 1870s
This brown glass bottle has been handmade from about the 1840s to 1870s. The bottle, possibly used to store ale or soda or mineral water, was found in the coastal waters of Victoria. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe into the molten glass blob at the end of the pipe. The glass was blown out to fit into the shape of the cylindrical dip mould. Once it hardened, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck while carefully using a tool to hold the base. The base may have been part of the dip mould, otherwise, a 'ponty' tool would have been used to flatten the base. A tool would have been used to cut off the bottle from the blowpipe. A piece of soft glass would be added to the mouth, then the double collar would be formed. Bottles like this would usually be sealed with a cork, which may have been held in place with wax or wire and tape. Although this bottle is not linked to a particular shipwreck, it is recognised as a historically significant example of handmade, 1840s to 1870s beverage bottles imported for use in Colonial Victoria. The bottle is also significant for its association with John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several shipwrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Bottle, brown glass, rough surface, uneven colour. Crude, applied mouth with double collar; wide straight upper, ring lower. Slightly bulbous neck. Shoulder seam. Body tapers inward towards base and has smooth ripples. Shallow base with wide heel. No obvious pontil mark. Sediment inside bottle. Glass is scratched in places. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, mouth blown, blown bottle, collectable, bottle, dip mould, soda bottle, brown glass, ale bottle, beverage bottle