In the early 1920s Australia was gifted six J class submarines from the Royal Navy. These were the latest and largest submarines built by the RN for service in World War I. They were competent but were in service with the Royal Navy for only a short time before the end of the war. Once in Australia they were placed into service but there was little appetite for submarines or in fact any other military endeavour in the early ‘twenties’. The world was exhausted from a long and dirty war followed by a devastating Influenza Epidemic. The J class boats were soon retired and sunk as breakwaters or scuttled in the ship graveyard area off the mouth of Port Phillip Bay.Popular diving sites in Ships Graveyard outside the rip between Point Lonsdale and Barwon HeadsCircular brass plaque inscribed with J5 North Sea 1917 1918 made from a piece of navigational equipment used on the submarine J5 mounted on woodSubmarine J5 North Sea 1917 - 1918j class submarines, j5, ships graveyard, port phillip

The goldfields resulted in the almost complete denuding of trees for access to the gold bearing land, for firewood and for the tanning industry. The need for wood further increased with the advent of deep quartz mining that required timbers for shoring up the shafts and tunnels. At some point in time it became necessary for timber to be carted long distances to fulfil the need. Between 1878 and 1884, the government set up 5 nurseries to try and rectify the shortage of native softwoods and encouraged the growth of State plantations and the thinning of trees to encourage growth of those remaining. 1907 - Creswick School of Forestry and Forest Management was started 1919 Establishment of the Forests Commission and the planting of many pine plantations 1924 Establishment of the first fire spotting towers Forest management tasks became a main project for "Susso" recipients during the Great Depression and again for internees during WWII.An 8 page document by David Bannear about the various industries of the Bendigo Goldfields and their effects on terraforming the local environment david bannear, central goldfields

A wooden racquet, featuring a decal of a stylized wreathed crown, on both sides of throat. Inscription, from head to stem, on both sides: SLAZENGER/MATCH POINT/GENUINE "STRATA-BILT" CONSTRUCTION. Inscription along left side of stem: A SLAZENGER RACKET HAS WON/NINE OF THE LAST FOURTEEN/U.S. MENS SINGLES CHAMPIONSHIPS. Materials: Wood, Nylon, Metal, Glue, Lacquer, Leather, Ink, Ribbon, Plastic, Painttennis

A Davis Hi-Point tennis racquet, with string whipping around shoulders, and leather handle grip with patterned perforations. Davis logo and model name features across base of head and throat. TAD "Kings of the Court" trademark features on lower shaft on reverse. Davis coat-of-arms "Duce virtute comite fortuna" trademark features on lower shaft on obverse. TAD trademark features on rubber butt cap. Letters 'EHS' on obverse, and 'GPE' on reverse, have been burnt into the shaft. Materials: Wood, Nylon, Ink, Glue, Lacquer, Metal, String, Leather, Adhesive tape, Rubbertennis

A Davis Hi-Point tennis racquet, with ribbon whipping around shoulders, and leather handle grip with patterned perforations. Davis logo and model name features across base of head and throat. TAD "Kings of the Court" trademark features on lower shaft on reverse. Davis coat-of-arms "Duce virtute comite fortuna" trademark features on lower shaft on obverse. TAD trademark features on rubber butt cap. Materials: Wood, Nylon, Ink, Glue, Lacquer, Metal, Ribbon, Leather, Adhesive tape, Rubbertennis

A Davis Hi-Point tennis racquet, with ribbon whipping around shoulders, and leather handle grip with patterned perforations. Davis logo and model name features across base of head and throat. TAD "Kings of the Court" trademark features on lower shaft on obverse. Davis coat-of-arms "Duce virtute comite fortuna" trademark features on lower shaft on reverse. TAD trademark features on rubber butt cap. Materials: Wood, Nylon, Ink, Glue, Lacquer, Metal, Ribbon, Leather, Adhesive tape, Rubbertennis

An unstrung Davis Hi-Point tennis racquet, with ribbon whipping around shoulders, and leather handle grip with patterned perforations. Davis logo and model name features across base of head and throat. TAD "Kings of the Court" trademark features on lower shaft on obverse. Davis coat-of-arms "Duce virtute comite fortuna" trademark features on lower shaft on reverse. TAD trademark features on rubber butt cap. Materials: Wood, Ink, Glue, Lacquer, Metal, Ribbon, Leather, Adhesive tape, Rubbertennis

A Davis Hi Point, fibreglass composite tennis racquet, with an open throat and large head. Racquet features plain leather handle grip. Model name features across base of head. Davis logo features along shaft. TAD trademark features on rubber butt cap. Materials: Wood, Nylon, Ink, Glue, Lacquer, Metal, Leather, Adhesive tape, Rubber, Fibreglass, Painttennis

A Wright & Ditson 'All American' model wooden racquet with open throat and octagonal grooved handle. String whipping around shoulders, throat pieces and around base of throat. Leather end wrap. On obverse, model name appears as a decal atop throat on base of head. On both obverse and reverse the trademark, patent information and country of manufacture are printed on shaft. On reverse, Manufacturer name is printed as decal on base of head, above throat. Indistinct letters carved into handle,and into shaft. Instructions on side of throat state: BAL/FROM/THIS/POINT. On one side of shaft:WRIGHT & DITSON/MAKERS/MADE IN U.S.A. and further down:STRUNG BY. Materials: Wood, Gut, Metal, Lacquer, Glue, Ink, Leather, Stringtennis

A Wright & Ditson 'All American' model wooden racquet with open throat and octagonal handle. String whipping around shoulders, throat pieces and around base of throat. Leather end wrap and butt cap. On obverse, model name appears as a decal atop throat on base of head. On both obverse and reverse the trademark, patent information and country of manufacture are printed on shaft. On reverse, Manufacturer name is printed as decal on base of head, above throat. Instructions on side of throat state: BAL/FROM/THIS/POINT. On one side of shaft:'WRIGHT & DITSON/MAKERS/MADE IN U.S.A./LICENSED UNDER/PAT.NO.1664466' and further down:'STRUNG BY'. On other side of shaft:PATENTED/TOP FLITE CONSTRUCTION. Materials: Wood, Gut, Metal, Lacquer, Glue, Ink, Leather, Stringtennis

A Wright & Ditson 'All American' model wooden racquet with open throat and octagonal grooved handle. String whipping and plastic reinforcements around shoulders and base of throat. Leather end wrap and butt cap. On obverse, model name appears as a decal atop throat on base of head. On reverse, manufacturer name is printed as decal on base of head, above throat. Instructions on side of throat state: BAL/FROM/THIS/POINT. On one side of shaft:'WRIGHT & DITSON/MAKERS/MADE IN U.S.A./LICENSED UNDER/PAT.NO.1664466' and further down:'STRUNG BY'. On other side of shaft:PATENTED/TOP FLITE CONSTRUCTION. Materials: Wood, Gut, Metal, Lacquer, Glue, Ink, Leather, String, Plastictennis

A Wilson, Mary Hardwick Match Point tennis racquet. Base of head features Wilson logo. Throat features decal head and neck illustration of Hardwick. Lower shaft and plastic butt cap features 'W' trademark. Materials: Wood, Nylon, Leather, Adhesive tape, Ink, Glue, Lacquer, Metal, Paint, Plastic, Plastictennis

A Wilson Famous Player Series, Maureen Connolly Match Point tennis racquet. Base of head features Wilson logo. Throat features gold fleur-de-lis device. Shaft features decal head and shoulders image of Connolly. Cloth butt cover features blue 'W' trademark. Leather handle grip features quatrefoil perforations. Materials: Wood, Nylon, Leather, Ink, Glue, Lacquer, Metal, Paint, Ribbon, Adhesive tape, Clothtennis

A Wilson, Tony Trabert Match Point tennis racquet. Base of head features Wilson logo. Throat features decal head and shoulders photo image of an older Trabert. Shaft features model name. Leather handle grip features quatrefoil perforations. Lower shaft and butt cap feature 'W' trademark. Materials: Wood, Nylon, Leather, Glue, Metal, Lacquer, Paint, Adhesive tape, Plastic, Plastictennis

A Wilson Set Point tennis racquet. Shaft features Wilson logo and model name. Butt cap features 'W' trademark. Leather handle grip features floral perforations. Materials: Wood, Nylon, Leather, Glue, Metal, Lacquer, Paint, Plastic, Plastictennis

A Dunlop 'Match Point' tennis racquet with no net. Materials: Wood, String, Adhesive tape, Leather, Painttennis

A Dunlop 'Match Point' tennis racquet with no net. Materials: Wood, String, Adhesive tape, Leather, Painttennis

A Dunlop 'Match Point' tennis racquet with no net. Materials: Wood, String, Adhesive tape, Leather, Paint, Plastictennis

A Wilson ' Famous Player' Tennis Set, featuring the images of Jack Kramer, Maureen Connolly, and Tony Trabert on the lid. The contents within the set box are: a Wilson 'Famous Player Model' tennis racquet; a Wilson racquet press; a Wilson racquet cover; and, a can containing three Wilson 'Match-Point' tennis balls. Materials: Cardboard, Ink, Wood, Nylon, Paint, Lacquer, Glue, Leather, Cloth, Metal, String, Adhesive tape, Rubber, Felttennis

A limited edition (256/300) of serigraph print entitled 'Match Point' depicting a singles tennis match. Materials: Ink, Paper, Wood, Cloth, Cardboard, Metal, Felt, Adhesive labeltennis

The point of view of the artist is looking towards Kew from the vicinity of Xavier College. The paddocks in the foreground are bordered by Wellington Street. In the distance the towers of the asylum can be see, further narrowing the date to after 1870s. The work exists in a number of original versions including a colour print.Kew, ca. 1870 - ca. 1880. Reproduction of a book plate from an original wood engraving, of an elevated view of trees and paddocks with a town in the background. The illustration is signed R. JENNY Sc. [Rudolph Jenny 1827-1905, lithographer.] A version from which this reproduction may have been made was donated to the State Library of Victoria by the National Trust, Victoria in 1985. kew (victoria), wellington street -- kew (vic.)

Oil on canvas

Date is approximate - early 1930s. Mr Oswald Joyce and Mr Bert Lamble used to ride their bicycles to the country to find work when they became unemployed. This included reworking old gold mines. Here they are seen leaving for Enoch's Point where they fossicked for gold during the Depression. A check of the electoral rolls points to this being the home of Frederick Harry Percival Lamble, labourer, born in Collingwood. He and his family continued to live at 87 Essex Road until his death in 1968 and his occupation is consistently given as labourer. His wife Bessie Louisa Woods died in 1957.Black and white photo of 2 men identified, but not specifically, as Mr Joyce and Mr Lamble, both of Essex Road, Surrey Hills. They are standing next to their bicycles on a roughly made path. The bikes are loaded up with swags and kit as if the two are about to depart on a journey. Behind is a picket fence and in the background the shops along Canterbury Road can be seen.essex road, frederick harry percival (mr), bicycles, depression, 1929-1939, unemployment, economic depression, mr joyce, bert lamble, frederick harry percival lamble, bessie ethel lamble, bessie ethel smith

This item is from the "Barone" Collection. "Barone" (also known as "Seaview") was a stately Brighton home built at 9 Moule Avenue prior to 1855 and demolished in 1986. The house's residents included Edward Elgin Browne (during 1859-72), a Melbourne tea merchant, and the family and descendants of retired Scottish Army captain Archibald Black (during the period 1880-1970). Its neighbors included “St Ninians” owned by the Ward Cole family, “Seacombe” owned by the Moule family, and the home of James Grahame and his family. The items in the "Barone" collection were largely donated by two of the house's later owners, Mrs Doris Halkyard and Mrs Brian Brandt.Leather, wood and metal ankle boots c.1860. Dark brown leather upper constructed of two pieces, the foot secures with a metal clasp at the centre front ankle. The upper is adhered to the wooden sole with metal nails. The sole of the forefoot has been reinforced with a metal horseshoe around the edge. On one shoe, a modern inscription (ball point pen) : From "Barone" 9 Moule Ave Brighton. Sept 1970 On other shoe, typewritten on paper: From "Barone", 9 Moule Ave., Brighton Pres. Aug 1970children's shoe, barone, seaview, brighton, 1860s

Polished wood in the shape of a shield, with a central silver plate inscribed with the name of the award and multiple smaller silver plates with individual winner names. There is also a round copper medal hanging from a chain decorated with a soldier pointing a gun on the front, leaves around the edge and on the back: 'In Pace Paratus', '1812 - 37 - 66' 'Presented by the Ontarion Rifle Association.' Winners were: 1972-73 A McKay 1973-74 I Leggett 1974-75 H Eyre 1975-76 J McKay 1976-77 J Musgrove 1977-78 J Musgrove 1978-79 J Patterson 1979-80 H Kakol 1980-81 J Musgrove 1982 H Kakol 1983 J Musgrove 1984 H Kakol 1985 H KakolPolished wood in the shape of a shield, with a central silver plate inscribed with the name of the award and multiple smaller silver plates with individual winner names.RVIB Rifle Club The Ann Andrew Perpetual Trophy Best Marksmanroyal victorian institute for the blind, rvib rifle club

The cabinet has a curved back and would have been custom‐built to fit the dimensions of the lantern room interior. It is likely to date from when the lighthouse was built in 1884 and may have been among the items delivered by the government steamer dispatch early in March which included ‘the lantern and other fittings for the Cape Nelson Lighthouse’. The Public Works Department provided a range of lightstation furnishings including office desks and cabinets, and domestic settings for keepers’ quarters, with nineteenth century items often stamped with a crown motif and the PWD monogram however the curved cupboards installed in Victoria’s lighthouse lantern rooms do not appear to display this small feature. Further research may reveal more about their manufacture and it is tempting to think that they were perhaps even supplied by Chance Bros as part of the entire lantern room installation. The company usually provided the timber battens for the lantern room paneling, and a cabinet may have been included in the assemblage. Another possibility is that the specially designed cabinet was made on site by carpenters along with other fittings. It is not known whether it is attached to the wall or movable; if attached it is considered to be a fixture and included in the Victorian Heritage Register listing for the lightstation (VHR H1773). Its location, when identified in the CMP of April 1995, was on the ‘lower lantern level’, where there was also a ‘timber step ladder’ (Argus, 6 March 1884, p6. nineteenth or early twentieth century), ‘timber framed lighthouse specification’, ‘timber framed chart’ and telephone .Residue on the furnishing indicates that it was formerly painted green, the colour of some of the other fixtures in the room, such as the original cast iron ladder. It is now partially varnished and the corner to the top’s edging on the right side has been cut off. The lighthouse also has a large curved back, two‐door cupboard. Other similar cabinets with curved backs survive at Cape Schanck, varnished wood cabinet with brass door knob, no drawers; Point Hicks, painted green with silver doors, no drawers and Gabo Island, bench top, 2‐door, no drawers, green paint removed to reveal cedar timber). Cape Nelson’s curved cabinet is unique among these examples for having drawers. The cabinet is a unique, original feature of the lantern room and has first level contributory significance for its historic values and provenance.The bench top cupboard has two drawers, each above a door, and each door is framed and beveled around a central panel. The cabinet has a curved back.

The tall, two‐door cupboard with curved shelves is without a back and is taller than the bench cupboard on the lower lantern room of the lighthouse . The curved shelving suggests that this practical storage cupboard was custom‐built or adapted to serve in this location on the landing level below the lantern room. It is not known when it was provided to the lightstation. It shares the structural features of this furnishing as well as other nineteenth century utilitarian cabinets that were made for Victoria’s lightstations, such as those fitted beside fireplaces in the keepers’ quarters (for example CNLS 0016) or serving as lantern room cupboards. They have doors simply framed and bevelled around central panels. This particular cupboard, which is painted grey with four white panels, is unusual both for its height and the four doors, with the twin top panels taller than those underneath. This panel arrangement repeats the design of the lightstation’s door cases. Further research may reveal more about its manufacture. It is not known whether it is attached to the wall or movable; if attached it is considered to be a fixture and included in the Victorian Heritage Register listing for the lightstation (VHR H1773). Other similar cabinets which have been constructed to fit the curved wall of a lighthouse survive at Cape Schanck, varnished wood benchtop, 2‐door cabinet with brass door knob, no drawers); Point Hicks, benchtop, 2‐door, painted green with silver doors, no drawers) and Gabo Island bench top, 2‐door, no drawers, green paint removed to reveal cedar timber), and Cape Nelson, benchtop, 2‐door, 2‐drawer, partially varnished). Cape Nelson’s tall cupboard with curved shelves and back profile is unusual among the lighthouse furnishings. The cabinet is a unique, original feature of the lighthouse and has first level contributory significance for its historic values and provenance.The tall, two‐door cupboard with curved shelves is without a back and has curved shelving. Painted grey with four white panels, on the four doors, with the twin top panels taller than those underneath.

The two‐door cabinet with a bench top is a simply made nineteenth century utilitarian cupboard. It is similar in style to cupboards that were built into spaces either side of fireplaces in keepers’ quarters. All have two doors simply framed around recessed central panels, which are sometimes bevelled. They are opened with a key, or by a basic knob made of metal or turned wood. Most also are made from a light‐coloured wood, which in this case is possibly Huon pine. Some are painted, others show evidence of paint which has since been removed in an effort to restore the surface, and a few retain their original wood finish. This cabinet, which has plain recessed unbevelled panels, has one internal shelf and stands on the floor without a plinth base. The bench top has basic squared edges, and a low backing with curved ends extends around one side. These features suggest the cabinet was fixed and originally built into a corner. The Cape Nelson CMP identified a similar but slightly different cabinet in one of the assistant keepers’ quarters which is shown with shelves added to the top. Other similar two‐door, benchtop cupboards that were probably built‐in include those at Cape Otway and Cape Schanck , which have since been moved out of the residences. Built‐in cabinets were standard fittings in lightkeeper quarters as illustrated by the Point Hicks Lightstation CMP, which shows a built cupboard beside a fireplace. The Cape Nelson cabinet, an original domestic furnishing provided by the Public Works Department, has first level contributory significance for its historic values and provenance to the lightstation.Two‐door cabinet with a bench top. The doors are simply framed around recessed central panels.Light coloured wood.