This gas mask was the standard issue gas mask for the Australian Army prior to and going into the Second World War. The mask featured two eye pieces made out of splinter-less glass which were removable to allow for decontamination of the mask without damaging the splinter-less glass eye pieces. The filter box was manufactured by Willow in Melbourne. The mask features a tissot system, which uses air provided by the intake assembly to defog the eyepieces. Air breathed out passes directly through the outlet valve which was designed work as voice membrane in order to enhance the speech of the user Unknown to most is that the GSR series of masks were manufactured in Australia rather than being imported from the United Kingdom. This was mainly due to the long travel distance between the UK and Australia, as well as the fact that the UK could not afford to give out masks during the war. The majority of the masks were manufactured at the Commonwealth Ordnance Facility Maribyrnong in Melbourne.This mask is representative of Australian manufacture during WWII. It is part of the story of Australian military history.Gas mas with dark coloured rubber mask. The back of the mask has elastic harness with 6 straps. They can be tightened or loosened to fit. The front of the mask has two large glass eye pieces with metal rims and a metal outlet valve. A concertina fabric and rubber tube leads from the outlet valve to a reddish brown box which is the filter. One side of the mask has the word 'Normal' stamped into it.Mask: NORMAL (on left side) / DPR 12/40 (right side) Back of harness: No. 4 III / 5-11-49 Filter canister: No 4A / 1940 / E VIwar, wwii, world war two, second world war, adult gas mask, military, portland, glenelg shire, army

The regulator was sectioned by I. Philpott in 1962.The regulator, designed to protect anaesthetic machines against sudden changes in pressure, consists of two main, rounded bodies, joined by a short connection. The lower section consists of a valve and a nut on the end that can be adjusted to provide a secondary pressure range. The upper section shows the gauge, which has had part of its face removed to show the inner workings. The valve on the reverse side has also been sectioned.anaesthesia, gas, pressure

Black and white photographs Identified as 1966. (1) 15 student ID photographs pasted on to a piece of paper. Names can be identified from 1966 College Magazine. (2-4) Very similar, probably the Student Representative Council. (5-7) Very similar, Staff Group (see B91.179.) (8-10) Very similar, probably a House Group. (11-13) Very similar, probably a House Group.college magazine, student representative council, staff group, house group, student id

Common Opal is a mineraloid that is non crystallising and is classed as an amorphous silicate, the chemical composition for Opal is SiO2 nH2O. Opals can develop in weathered sedimentary rock typical in arid regions where limited water enters small gaps in the rock, and the silicate is hydrated. Common opals, unlike precious opals, do not exhibit ‘play of colour’ in which the colour appears to change depending on the angle of view. While precious opals are highly valuable and cut as gemstones for jewellery, common opals can be cut into inexpensive gemstones and are also mined for various uses including as ingredients in ceramics, insulation, fillers, and abrasives. The source of this common opal specimen is unknown, but common opals are found around the world, notable deposits are found in Queensland, South Australia, New South Wales, Peru, Kenya, Nevada, Oregon, and Mexico. This common opal specimen is of historic and scientific significance due to its donation in 1868 as part of the Geological Survey of Victoria and as a typical example of uncut common opal. This specimen is part of a larger collection of geological and mineral specimens collected from around Australia (and some parts of the world) and donated to the Burke Museum between 1868-1880. A large percentage of these specimens were collected in Victoria as part of the Geological Survey of Victoria that begun in 1852 (in response to the Gold Rush) to study and map the geology of Victoria. Collecting geological specimens was an important part of mapping and understanding the scientific makeup of the earth. Many of these specimens were sent to research and collecting organisations across Australia, including the Burke Museum, to educate and encourage further study.A palm-sized amorphous (non-crystallising) hydrated silicate mineraloid specimen in shades of brown, orange, and white.Existing label: Common Opal / Locality unknowngeological specimen, geology, geology collection, burke museum, beechworth, common opal, opal, mineraloid, amorphous silicates, hydrated silicate

A spokeshave was made with a wooden body and metal cutting blade. With industrialization metal bodies displaced wood in mass-produced tools. Spokeshaves can be made from flat-bottom, concave, or convex soles, depending on the type of job to be performed. They can include one or more sharpened notches along which the wooden shaft is pulled in order to shave it down to the proper diameter. Historically, spokeshave blades were made of metal, and the body and handles were wood. Unlike a drawknife, but like a plane, spokeshaves typically have a sole plate that fixes the angle of the blade relative to the surface being worked. By the twentieth-century metal handles and detachable blades had become the most common. A convex, wooden, variant of the spokeshave is called a travisher; at one time mostly used in chairmaking.A tool of the cooper and other woodworking tradesmen that has been in use since the making of barrels and wooden buckets for hundreds of years without much change to the design or how the tool is used.Spokeshave, with two wooden handles on either side. Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, coopers tools, spokeshave, barrel making, wood plane

A spokeshave was made with a wooden body and metal cutting blade. With industrialization metal bodies displaced wood in mass-produced tools. Spokeshaves can be made from flat-bottom, concave, or convex soles, depending on the type of job to be performed. They can include one or more sharpened notches along which the wooden shaft is pulled in order to shave it down to the proper diameter. Historically, spokeshave blades were made of metal, and the body and handles were wood. Unlike a draw knife, but like a plane, spokeshaves typically have a sole plate that fixes the angle of the blade relative to the surface being worked. By the twentieth-century metal handles and detachable blades had become the most common. A convex, wooden, variant of the spokeshave is called a travisher, at one time mostly used in chair making.A tool of the joiner and other woodworking tradesmen that has been in use since the making of furniture for hundreds of years without much change to the design or how the tool is used to smooth and shape timber.Spokeshave, Marked AH, (believed to be owner)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

This testing voltmeter recorder was last certified by SEC Vic laboratories on the 17/4/77. It was used extensively as mobile recorder placed for periods of one month at locations experiencing unacceptable fluctuations of power. These locations would cover the North East regions of Victoria. They cover voltage drops at domestic and business properties especially those that were experiencing regular fluctuations(daily) at approximately the same time of the day. As the electrical network is required to operate within a set level of voltage, fluctuations outside of this has to be investigated and necessary remedial action taken. This is especially so for rural properties where power "drainage" can occur through animal/bird and tree interference. It can also be the result of defective wiring and overloading at peek operational times (milking machines).This mobile voltage recorder is very significant to the Kiewa Valley because it highlights the difficulties that can occur in maintaining a power supply that experiences fluctuating power demands by the rural industries that it supplies. The requirement of a mobile testing apparatus to cover the various sections in the Kiewa Valley and other rural areas in the northeast region is one of necessity as electricity once connected to a rural property is a labour saving supply as generators on rural properties require a higher degree of maintenance an ultimately at a higher cost. The testing of the SEC Vic supplied electricity to rural properties,those who had previously run on generators, had to be quick and unassuming with certainty of correct supply levels.The mechanism of this voltage recorder has been installed(by the manufacturer) into its own protective wooden box. This box has a front (swing open) lockable section which permits direct access to the installed measuring equipment (for servicing and data collection). The top section of the box has two screw on terminals for access to the machine being tested. This tester has its own inbuilt ink supply facilities and a mechanical clockwork device that unwinds a roll of paper onto a second roll at a rate of 10 mm per hour. The recording chart is marked with time slots against voltage. There is a recording arm which has an ink pen at the end. Both arm and pen carry the ink supply from the ink reservoir, located on the left side of the cabinet door in specially constructed bottle holder( three small bottle capacity). To record a suspect power problem to a home or business establishment the voltmeter is connected to a power supply outlet being tested and wind the recording clockwork mechanism (gives a four week running time). Before leaving the recorder in situ the electrician checks to see if the chart is recording the correct voltage and that the clock mechanism is advancing correctly.On the front of the access "door" at the top a metal label "RECORDING AMMETER" below this "MURDAY SYSTEM" below this "ALTERNATING CURRENT" and below this the manufacturer's registered number "No. 139156" Below this is a metal tag with State Electricity Commission of Victoria Electrical Engineer's Section equipment number "338" Below these tags and above the viewing window is the manufacturer's dtails "EVERSHED & VIGNOLES Led LONDON"sec vic kiewa hydro scheme, alternate energy supplies, alpine feasibility studies temperature, rainfall, power outages

Router planes are not the same as modern power routers. The simplest answer is that a router plane is a chisel held at adjustable vertical depths in a block of wood or metal. An antique-style router plane is mainly used for levelling out the bottoms of dado joints, mortises, and when installing hinges, inlays, and tenon cheeks, and similar other uses. There are three main categories or styles of router planes the earliest type of these is affectionately referred to as an "old woman's tooth", or "Grandma's Tooth". These planes can be as simple as a block of wood with the iron wedged in, and some have wedges with brass thumbscrews. Most of these router planes were shop-made tools their bottom flat so they can ride along the top of the wood, and the iron is adjusted to the desired depth by moving it up and down with your fingers.An interesting vintage joinery tool used before mechanical routers with early examples often sought after by collectors today. The subject item was probably made in a joinery workshop for a specific need in regards to producing a specific type of profile. As a result, even though the item appears to be quite old it has no makers mark, age and provenance are unknown.Router Plane Old Woman's Tooth pattern wooden stopper for holding the blade in place. Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

A spokeshave was made with a wooden body and metal cutting blade. With industrialization metal bodies displaced wood in mass-produced tools. Spokeshaves can be made from flat-bottom, concave, or convex soles, depending on the type of job to be performed. They can include one or more sharpened notches along which the wooden shaft is pulled in order to shave it down to the proper diameter. Historically, spokeshave blades were made of metal, and the body and handles were wood. Unlike a drawknife, but like a plane, spokeshaves typically have a sole plate that fixes the angle of the blade relative to the surface being worked. By the twentieth-century metal handles and detachable blades had become the most common. A convex, wooden, variant of the spokeshave is called a travisher; at one time mostly used in chairmaking.A tool of the cooper and other woodworking tradesmen that has been in use since the making of barrels and wooden buckets for hundreds of years without much change to the design or how the tool is used.Spokeshave, with two wooden handles on either side. Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, coopers tools, spokeshave, barrel making, wood plane, wagon making, joiners tools, carpenter tools

A view of Mountain Grange Homestead built by Thomas Hand with buildings and ground covered in snow. The photograph has historical information on the back handwritten by John Lundy-Clarke in 1976.1921 A view over “Mountain Grange” from the side of Mt Kalorama above where Grange Road is now. On the left of the homestead is the avenue of pine trees under which the annual Sunday School picnic was held. On the right is the giant pine that still stands (1976) and the great barn. The separate kitchen of the homestead can be clearly seen. mountain grange, snow, john lundy-clarke, thomas hand

The first meeting of the 1st Bendigo Guides was held by Miss Merle Bush on the 22nd of August 1922 in the St Paul' School Room. Twelve girls were present. Miss Bush was given permission to open the Company by Miss R. Hamilton, State Secretary for Victoria, she received her Captain's Warrant on 12th December 1922.Happy Birthday card - Colored scene of boats on a lake with building in the backgroundCongratulations and best wishes to the Merle Bush trefoil Guild on your 25th birthday ad all the best for your future. Happy Birthday. I am sorry that no one from Goulburn Valley Trefoil Guild can be with you today but I hope you have a wonderful day Beth Brisbane Goulburn Valley Trefoil Guildgirl guides, guiding, merle bush, trefoil guild, 25th birthday merle bush trefoil guild, goulburn valley trefoil guild

Nicholas Caire was born on Guernsey in the Channel Islands in 1837. He arrived in Adelaide with his parents in about 1860. In 1867, following photographic journeys in Gippsland, he opened a studio in Adelaide. From 1870 to 1876 he lived and worked in Talbot in Central Victoria. In 1876 he purchased T. F. Chuck's studios in the Royal Arcade Melbourne. In 1885, following the introduction of dry plate photography, he began a series of landscape series, which were commercially successful. As a photographer, he travelled extensively through Victoria, photographing places few of his contemporaries had previously seen. He died in 1918. Reference: Jack Cato, 'Caire, Nicholas John (1837–1918)', Australian Dictionary of Biography.An original, rare photograph from the series 'Views of Victoria: General Series' by the photographer, Nicholas Caire (1837-1918). The series of 60 photographs that comprise the series was issued c. 1876 and reinforced a neo-Romantic view of the Australian landscape to which a growing nationalist movement would respond. Nicholas Caire was active as a photographer in Australia from 1858 until his death in 1918. His vision of the Australian bush and pioneer life had a counterpart in the works of Henry Lawson and other nationalist poets, authors and painters.Albumen silver photograph mounted on boardInscription on reverse: ‘In the distance among the foliage can be seen the New Bridge across the River Watt. Previous to its erection, the only means of crossing over to the township was across the fallen trees, which are of prodigious dimensions. The River, as may be seen, is very rapid, and, though shallow, it contains a great quantity of fish of a somewhat moderate size.’nicholas caire (1837-1918), landscape photography

A class photograph of Year 12A at Watsonia Technical School in 1988. This copy is owned by GHS member Rosie Bray who was a mature age student from 1988-2002 (Rosie's story "Second chance at learning" can be read at Item 787). In 1988 Rosie was a student at Watsonia Technical School (WaTECH)Digital colour school photograph rosie bray, watsonia technical school

A digital copy of the Greensborough Secondary College Graduation Ceremony 1995. This copy is owned by GHS member Rosie Bray who was a mature age student from 1988-2002, (Rosie's story "Second chance at learning" can be read at Item 787). In 1995 Rosie was a student at Greensborough Secondary College [Gr8750]Digital copy of programrosie bray, greensborough secondary college, greensborough college

A digital copy of the Greensborough Secondary College Graduation Ceremony 1996. This copy is owned by GHS member Rosie Bray who was a mature age student from 1988-2002, (Rosie's story "Second chance at learning" can be read at Item 787). In 1996 Rosie was a student at Greensborough Secondary College [Gr8750]Digital copy of programrosie bray, greensborough secondary college, greensborough college

A class photograph of Year 12A at Watsonia High School in 1989. This copy is owned by GHS member Rosie Bray who was a mature age student from 1988-2002 (Rosie's story "Second chance at learning" can be read at Item 787). In 1989 Rosie was a student at Watsonia High School (WaHIGH)Digital colour school photograph rosie bray, watsonia high school

A class photograph of Year 12 at Greensborough Secondary College in 1990. This copy is owned by GHS member Rosie Bray who was a mature age student from 1988-2002 (Rosie's story "Second chance at learning" can be read at Item 787). In 1990 Rosie was a student at Greensborough Secondary College (Gr8750)Digital colour school photograph rosie bray, greensborough secondary college, greensborough college

A class photograph of Year 12 at Greensborough Secondary College in 1995. This copy is owned by GHS member Rosie Bray who was a mature age student from 1988-2002 (Rosie's story "Second chance at learning" can be read at Item 787). In 1995 Rosie was a student at Greensborough Secondary College (Gr8750)Digital colour school photograph rosie bray, greensborough secondary college, greensborough college

A class photograph of Year 12 at Greensborough Secondary College in 1996. This copy is owned by GHS member Rosie Bray who was a mature age student from 1988-2002 (Rosie's story "Second chance at learning" can be read at Item 787). In 1996 Rosie was a student at Greensborough Secondary College (Gr8750)Digital colour school photograph rosie bray, greensborough secondary college, greensborough college

Photograph shows GHS President Noel Withers and publisher Blaise van Hecke from Busybird at Diamond Valley Learning Centre. The event is the launch of Greensborough Historical Society's first book "As I Recall", a compilation of recollections of life in the area. More photos of this event can be found at the GHS Resource Centre.Digital copy of colour photograph.as i recall, greensborough historical society

A snatch block is a heavy-duty pulley inside a metal casing. It is primarily designed for handling heavy goods, working as a pulley point that can redirect the course of a winch line. Snatch blocks are also used to increase the lifting or pulling capacity of wire hoists and winches. There is no history or manufacturing provenance currently available.The subject item at this time cannot be associated with an historical event, person or place, provenance is unknown, item is believed to have been produced in the first quarter of the 20th century.Snatch block, metal, one sheave, with a large hook that has a hole drilled through its tip.flagstaff hill, warrnambool, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, snatch block, metal snatch block, lifting gear, rope pully, marine technology, ship rigging

The Australian union jack has been in use since 1901, with a slight modification in 1908. The union jack is above the "seven-pointed Commonwealth star" and to the side of the Southern Cross, a constellation of five stars that can be easily seen in the southern hemisphere. The country's six state flags have union jacks too.In a gold frame there is a RAN red ensign flag. On the top left hand corner there is the Union Jack and against the red background are the white stars of the Southern Crossran, flag, cerberus collection

Handwritten draft for a speech, date uncertain. Considers the question of Australian identity: whether it exists, what can be done to foster it in the arts, design and culture as a whole. Boyd argues that the only route to a distinctive Australian identity is to develop and foster new ideas rather than taking cultural cues Britain or America.Handwritten, quarto, 3 pagessydney opera house, australian identity, australian culture, robin boyd, manuscript

Post Card Valentines c 1950. Main Street Stawell looking West. The view show cars parked at an angle down Main St. and shops mainly along one side. The town hall clock can be seen above the building with the Coles sign, Macrows and Geo on the right hand edge.Valentine's Post card of Main St., Stawell looking West. The scene is of many 1950 cars parked along the street with Coles Variety Store, Macrows and Geo stores dominating to the right of the photo."VII" "Main Street, Stawell" (on the front) "Valentine's Post Card sending you greetings" (on the back)stawell business streetscape

This letter is in response to Robin Boyd's announcement that he will resign from the Melbourne Beefsteak Club. A formal letter from Boyd is requested immediately, so another member can be elected. A copy of Victorian Children's Council Basic Book List and two leaflets were enclosed with this letter - not found in Boyd's papers.On the reverse side, Robin Boyd has drafted a reply to the sender (Frank) in pencil. This explains the reason for Boyd's resignation - competing work and family life pressure on friday evenings, making it impossible to attend monthly dinners consistently.

The subject of these slides is not known until they are looked at again, their titles could give clues to the contents. Some titles that can be seen are; Tavern in the Town, I love you truly, The old spinning wheel The good old summer time Swannee River Bell's of St Mary's Nursie Little brown jugA record of the types of songs sung by Legatees at Comradeship gatherings. Comradeship meetings were very important to the Legatees. Legatees supported each other by coming together for various events throughout the year. Coloured 35mm slides, coloured photo surrounded by cardboard border.Various titles of songs on individual slides.comradeship, songs