Black and white photograph taken at commencement of works on Aquatic Centre, Russell Smith Works Engineer, Bill Hodgins Structural Engineer, Stephen Cheney Architect, Peter Minster Builder, Marlene Battista Project Engineer, Michael Ellis Shire Manager of Engineering and Kim Davis Foreman. Lakes Entrance Victoriarecreational facilities, management

Designed and built by Richard Rennie, builder of several notable brick buildings in the area. Built by promenant builder Richard RennieB/W photograph of Buninyong Town Hall, Court House and Council Chambers, south side of Learmonth St. Buninyong. Built by Richard Rennie, opened in August 1886.buninyong, town hall, richard rennie, learmonth st, whykes butchers

1932 VY Vauxhall Coupe Bodied in Australia by Holden Motor Body Builders.The great depression hit Australia in 1932 and less than500 vehicles were bodied by Holden that year. The first British car fitted with a gear-box "embodying the now famous Synchro-Mesh principle", a system of gear change making every driver an expert. Providing a faultless shift-speed operation it was fitted to all Cadets from late 1931.[Engine in line six Cylinder 2048cc Gearbox- Three forward speed with synchromesh on 2nd and third gears. Burgundy 2 door Vauxhall coupe with black leather clad roof, Dicky seat in rear.automobile, holden, bodied

The family-owned timber manufacturing business Pelco was started by Cecil Victor Woodfield in 1937. The joinery company Pelco began by making wooden ladders and was registered as the Palmerston Extension Ladder Company. C V Woodfield, who lived from 1884 -1959, arrived in Palmerston North from Canterbury NZ in the aftermath of the Great Depression to work in construction. The company got its first step up when Woodfield was asked by a commercial painter to make a ladder, and the founder set up shop in a garage on Ruahine St. According to the company website, Pelco made its name in New Zealand with its Oregon Extension Ladders, and up until its closure, manufactured non-conductive Lamilite Ladders for the electrical supply and service industry worldwide. The company was incorporated as a joinery business in 1946, and continued making high-end cabinetry for seven decades. Under director Geoff Woodfield, in the 1950s, the company embarked on the production of Fleetcraft plywood boats. Another water-related enterprise followed, with the manufacture of oars and paddles Its branded Gull Superior Oars and Paddles business began exporting in 1972 to Australia and subsequently to the United States, UK and Japan. The company ceased trading in April 2018 and was placed into receivership.This pair of lightweight oars represents the maritime tradition of handmade oar making, which has evolved over the centuries. Their shape is still similar to early oars and continues to serve the same purpose, to steer and propel a boat. The oars are associated with a significant family business situated in Palmerston New Zealand that along with making ladders also graduated into making wooden boats and oars.Pair of blonde varnished Tasman Fir oars with a flattened paddle at one end. Made by Gull of New Zealand, sold by James Edwards & Sons of Melbourne. Inscriptions on printed labels on the oars.(1) "GULL Superior Oars and Paddles, Pelco, Palmerston North NZ" (2) "JAS. EDWARDS & SONS, Boat Builders, Oar and Skull Makers, & Importers, PRINCES BRIDGE MELBOURNE"warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, oar, oars, gull oars and paddles, new zealand oars and paddles, jas edwards and sons melbourne, rowing equipment, new zealand oak, paddle, james edwards and sons melbourne, james edwards, tasman fir, gull superior oars, marine equipment, marine technology, ship fitting, boat fitting, rowing oar, boat oar

Black and White photograph of a interior saloon step plate of a Bendigo single trucker, advising that it was built by Duncan and Fraser of Adelaide. Photo by George Bishop 12/1971.On the back of the photos in ink on a label "Step plate indicating tram builder Duncan and Fraser Adelaide SA. Photographed December 1971, Bendigo Victoria" and "Photo G. Bishop" in penciltramways, trams, bendigo, duncan fraser, tramcar component

2 small colour photo showing the main building wall with Cross, facing Station Street, Ringwood in 1963. Photos undated. These photographs are in the presentation album given to Vera Wigley in memory of her husband, builder Evan Wigley. See Registration Numbers 11002-00 to 11002-10 for the full set of photographs.

Pittock leather maker's collection * 15 leather maker's awls (120-150mm long), * four chisels (200-245mm long), * one wooden mallet 285mm long. * three timber straight edge marker and plumb line * one bird ornament Items stored in coach builder's box, reference 13000.1.

25cm x 20cm black and white photograph of South-West Sydney Street. The buildings that can be seen include Kilmore Timber Yard, Riche Fitzgerald & Co Builders Ironmoncery, Red Lion Hotel. Pictured are people standing under the awning of the Ironmongers. Picture was taken in 1860. This picture is a copy from LaTrobe.Written on the back: Kilmore Historical Society #4.#5.10/86-33 Copy LaTr. 1860 Trainor's Store etc. looking south-west from Union St.shopfronts, storefronts, retail stores, 19th century

Dyeline print of Drawing R10-313 - Motor Bus Data, dated 22/2/1962. Gives data by class, depot allocation, chassis, operation type - one or two man, number of vehicles, body builder, capacity, turning circle, wheel bases, Tare weight, overall length, width and height.On outside corner - "Data Sheet Buses" in red ink and number "R10-313" in black ink.trams, tramways, buses, mmtb, lists

Home and garden at 23 Stanley Avenue; Charles Hanlin, builder; Landscape by Gordon Ford.11 colour prints 10 x 15 cmhouses, mudbrick, gayle blackwood collection, charles hanlin, gordon ford, stanley avenue, eltham

Typical of the small toolbox that boat-builders took to the confined areas when working on boatsWooden toolbox containing boat building tools

Carriage & Coach Builders. Steam Coach Factory. Plate 369 Chuck Photo Series.w. leach & son, albert street, creswick, building, persons, vehicles, manufacturing

Alexander Fraser lived at 178 Carpenter Street with his wife Mary. He was a builderBlack and white photograph mounted on rectangular grey board. House, cement rendered double fronted bungalow central porch with apex roof. Flower boxes on porch [PTO] ramp to side door on left. Leadlight windows on top of front door and windows. On back of photo board ' Frasers Carpenter Street, £1200 sewered' Date stamp: 9 December 1927, on back. Sold for £3650 with certain coverings, 19.10.50.Frank A. Jeffree Bendigoplace, building, residential, stamped on back in rectangle ''t.c. watts and son/auctioneer/estate agents/253 mitchell street/bendigo'' stamped on back in circle ''royal historical society of victoria, bendigo branch''

The half model is the traditional way for boat-builders to shape a boat before starting construction.Half model of fishing boat mounted on backing board

The law court buildings on the corner of Russell and La Trobe Streets (Melbourne) were later to house the Supreme Court of Victoria. The law courts were built in 1842. The inscription by Dorothy Rogers [sic] incorrectly describes the builders as Swanson Bros., who instead were the builders of the later Magistrates Court on the same site. Matchbox containing architectural fragments from the old law courts [Supreme Court] in Russell Street. The matchbox has a label on the front and more detailed information included in a note inside the box. The item is believed to have belonged to the historian Dorothy Rogers.Exterior "Chips from the old law courts Russell St." Inside: "Court House built by Swanson Bros in 1842 of Moorabool Stone & opened 1st time [sic] in 1843. Stone composed of tiny shells".dorothy rogers collection, supreme court - melbourne (vic), supreme court of victoria - russell street - melbourne (vic)

4 small and 1 large colour photo taken during Opening Day Ceremonies for the Ringwood Methodist Church in 1963. Photos undated. These photographs are in the presentation album given to Vera Wigley in memory of her husband, builder Evan Wigley. See Registration Numbers 11002-00 to 11002-10 for the full set of photographs.

JANUS (1910-1932) - 1913 sold to British India S.N. Co. 1932 sold for scrap, possibly burnt out and scuttled Visakhapatnam as breakwater 7th January 1933.Half ship builders model in glass case with rear mirror. The original ship was a passenger/cargo steamship built by Palmers, on Jarrow-on-Tyne in 1910 for A Currie & Co. of Melbourne. 4,824 gross tons. 399.93ft x 53.15ft (121.9 x 16.2m). Single screw, triple expansion engine, cruising speed 12 knots. plaque at foot of boat: " S.S JANUS/ DIMENSIONS/ LENGTH 400.0/ BREADTH 53.0/ DEPTH 37.0/ DEADWEIGHT 7500 TONS SPEED 12 KNOTS./ BUILY BY/ PALMERS SHIPBUILDING AND IRON COMPANY LIMITED/ JARROW-ON-TYNE/1910" on boat: "JANUS"

Factory Show-Rooms. Established 1853? Carriage Builders. Plate 236 Chuck Photo Series.l.e. cutter, armstrong street, building, manufacturing, ballarat

Boat Builders, Sailing and Rowing Boat Hire. All Kinds of Bait. Plates 291 & 292.r. taylor, lake wendouree, boat shed, lake view hotel, buildings, commerical, hotel