Ladies black boned bodice of brocade fabric with floral pattern. Crossover front opening with internal centre fastened with thirteen metal hooks and eyes.Crossover section fastened on LHS with seven metal hooks and eyes covered by overlapping panel. Front of bodice is decorated with dense patterns of small black beads and black sequins. There are three vertical panels of beading. The centre panel is bordered with gathered ruffles of black ribbon (one cm wide). The overlapping edges of the side panels of the bodice are edged with gathered ruffles of black ribbon. The front panels of the bodice are lined with black cotton fabric. The back of the bodice is plain. The bodice has a straight edge at waist level with a cotton tape hem. The lower section of the bodice is boned with ten fabric cased bones distributed across the front and back, attached vertically from the waistband. A fabric belt (three cms wide) is attached at centre back four cm above the waist, inside the bodice. The left hand end of the belt has a metal buckle ( 3cmX2cm). The bodice has a 7cm stand-up collar fastened above the left shoulder with three metal hooks and eyes. The collar is densely decorated with small black beads and black sequins. At each shoulder is an epaulette decorated with beads and sequins and edged with one cm gathered ribbon ruffles. The long sleeves are shaped at the elbows with four cm beaded cuffs fastened with two metal hooks and eyes. Above the cuff is a four cm fabric flounce, a row of gathered ribbon ruffle (one cm) and a three cm row of beading and sequins. Sleeves are unlined.costume, female, ladies black beaded boned bodice.

1968 Blazer - Mexico Olympics. Maroon single breasted collarless wool blazer. Fastened with three 2 cm metal buttons with wheel spoke pattern. Three internal front pockets with slit openings. LHS breast pocket has pink and black cloth badge (9cm X 9cm) stitched below pocket opening. Badge has embroidered symbols of an arm above three waves. Straight sleeves with 7 cm slit at wrist fastened with 1.5 cm metal buttons with wheel spoke pattern. Blazer has two 23cm side vents on the back. Half belt (fabric) 5cm X 38 cm across the back above side splits. Padded shoulders. Two internal pockets in the front lining. Blazer partially lined with mauve satin with small random check pattern. Sleeves fully lined. Enamel badge on RHS neckline (2.1 cm X 2.1 cm) - Olympic Rings, Gold coin, ''MEXICO'', green , white and red colour strips.costume, male, maroon blazer.

Black men's trousers with flared legs-31 cms at hem with 7 cm cuffs. belt keepers. Side pockets and one back pocket on RHS. 14 cm metal zip at front opening with 1 cm metal hook and eye at waist. 4.7 cm waistband with seven belt keepers. Side pockets and one back pocket on RHS.Label on back pocket RHS. ''Simon Gee London'' Tag 'Polyester Viscose Tag 33. Written in pen underneath .35.costume, male, black flared trousers

Photograph. Cohn Bros. Collection. Black & white photo of three steel vats and one other vat above them. The higher vat has an agitator which is driven by a large belt and pulley. A man holding a bucket is standing on a stairway beside it. ML45/6 (written on the back).organization, business, cohn bros, cohn bros. collection, brewers, cordial & aerated water manufacturers

Photograph. Cohn Bros. Collection. Black & white photo of a juicing machine. One man is tipping a bag of fruit into the hopper. Another man is emptying the juice into a bucket. The fruit travels up a conveyor belt and into the machine where it is juiced and the pulp comes out a side chute into a box. ML45/2organization, business, cohn bros, cohn bros. collection, brewers, cordial & aerated water manufacturers, juicing machine

Uniform used by Major Philip Ketch, Commanding Officer Creswick Volunteers (1883). Was on display for many years at Ballarat Ranger Barracks but at the families request returned to Creswick MuseumOnly known uniform on display of the Creswick (Ballarat) Volunteers.Creswick Volunteers Officer's Dress Tunic. Main body in black wool fabric with rounded red stand up collar and braid. Sleeves end with red wool pointed cuffs with braid. Braiding on main body of uniform. Froged with 5 rows of braid ending with netted button. On sleeve badge with crossed rifles year 1883 and above years 1880, 1881, & 1882. Leather belt across shoulder with whistle attached.volunteer uniform, creswick, philip ketch

1 blue case labelled MEDETRON containing; 1 power unit including volume, 1 elastic belt clip, 1 stethoscope, 1 metal bell with connecting plug, 1 black drum piece"Medetron Electronic Stethoscope". Made in Japan. Labelled "School of Nursing"electronic stethescope

Oval shaped metal buckle with Vietnam (top) Veteran (bottom) in Silver on Black enamel. 1959-1975. Red center with red, white and blue shield in middle of Eagle in flight. "I served my time in hell" engraved on bottomI served my time in hell engraved on bottom. 2278 on reverse of bucklebelt buckle, vietnam veterans

Wooden shield with silver metal front featuring a coloured image of a pig wearing yellow guernsey, black shorts, footy boots, field belt and holding a rifle.plaque, 1 company, 6 rar

Framed Black and White Photograph of Soldier in Jungle Greens with a Belt of Bullets around his neckphotograph, digger, soldier

Green Canvas bottle holder with green webbing to attach to belt. Metal clasps and press studs. Black mark arrow on front.8465-CO-026-1864. Cantas 84 printed inside lid of carrierwater bottle cover

Dated 1964, these are standard issue pouches, designed to carry ammunition during the conflict in Vietnam.Khaki canvas ammunition pouch with four compartments each with a strap and fastener made from webbing with a metal clasp. Dividers are metal capped. Webbing on back for attaching to soldier's belt.Black printing on inside of pouch. 8465-66-021-1977 C.C.C.F. ^.1967ammunition pouches, canvas, 1967, khaki, equipment, military equipment

The navigational computer was a circular slide rule used for calculating height and air speed corrections when flying an aircraft. The front cover lifts to reveal a further calculator used to solve vector triangles and plot course alterations. The device was intended to be strapped to a pilot's leg. The instrument was made by White and Gillespie (Melbourne) Pty Ltd c 1940 for the RAAF and used during WW2.Black metal box with silver metal flap top cover affixed with rotating circular rule . Two adjustable belts are affixed to the base of black box. A small spiral bound note book is contained beneath the flap top. RAAF Computer Navigational system MK. III. D. Serial No WG 2833navigation, raaf, computer, aircraft, ww2, 1940

The puppets were made by German POW's in camp 13 and sent to internment camp 3 as gifts for the children at Christmas time.Hand painted brown paper mache head with red lips, blue eyes and black eyebrows. Wearing a blue and white check hat and matching top over a green and red top, skirt and trousers. Long sleeves have a white trim. He has a white frilled neck ruff. The legs are only material at top with wooden boots painted black. There is no body parts. He is wearing a loose leather belt.pow puppets, pow handcrafts, hand puppets, sharon lohe, ww2 camp puppet theatre, puppetry

This military jacket is an Australian military Chaplain's jacket. It has three 'pips' on the epaulets. The four-sided "star" or "pip" has been used to designate officer rank in the British and Australian armies for many years and is a stylized version of the very elaborate star of the Knight Grand Cross of the military division of the Most Honourable Order of the Bath, one of Great Britain's four senior orders of knighthood. The original badge contains the motto "Tria Juncta in Uno", which means "Three Joined in One", and refers to the union of the three kingdoms of the British Isles (England/Wales, Scotland and Ireland). https://corregidor.org/acgq/web_redirect_3628.3645.8883/forum_pages/omh_1104.htmlBlack wool belted jacket with four Australian Military Forces brass buttons and pleated breast pockets and front pockets. The jacket has epaulets with three pips, or rank insignia, and an Australian Military Forces button. The belt has a brass buckle and has leather tabs at the back which are buttoned to a fabric carrier to keep the belt in place.

The raincoat was worn by Hilda Elizabeth Foster, Presbyterian Deaconess. Hilda Elizabeth Foster (1890-1982) was commissioned as a Deaconess in 1914 giving a lifetime of service to the church particularly in the social care aspect of the Gospel. She was also a double certified nurse. Deaconess Hilda Foster began her work as a Deaconess in South Melbourne and then served for 13 years with the Presbyterian Sisterhood in North Fitzroy caring for unmarried mothers and their babies. In 1933 she was appointed Matron of the Presbyterian Girls' Home in Elsternwick where she worked for 15 years. She retired in 1948 when it was noted "In complete dedication matron has given herself to this care of souls". Deaconess Foster was awarded the British Empire Medal for her work in the Queen's birthday honours in 1981. Deaconess Foster was one of the first qualified Mother Christmasses in Australia. [Minutes of the Sixth Synod, Oct 1982] Black gabardine winter coat with a plaid lining, two side pockets and a buckled belt. Their is a label in the raincoat which advises re waterproofing."Dunlop waterproofs" "Reign in the rain" "65% Wool 35% Cotton"presbyterian deaconess, deaconess hilda elizabeth foster

Owned by Martin Balsarini, a resident of Chiltern Valley, for use in WW1. Service Number 1682. Martin Balsarini enlisted on the 21/7/1915 and served with the 4th Australian Lighthorse, AIF. He participated in what is known as the last great cavalry charge, the charge of the 4th Australian Lighthorse at Beersheba on the 31/10/1917. WW1 owned by Chiltern Valley Resident Soldier Martin Balsarini who was in the Charge of the Lighthorse at Beersheba with the 4th Australian Lighthorse on the 31/10/1917. Brown Leather Luger Revolver Case for attachment to belts webbing WW1. 1. Etched into the inside leather cover : J. A. Stanien... 1917 Berlin. 2. Stamped into the inside leather case black ink in Black Markings : B.A.X1 ww1, revolver case, balsarini, chiltern., martin balsarini

Item from Clunes Hospital which closed in 1992-3, donated by Sister Edith Richards. Part of Clunes Hospital collection.Box containing containing 5 items - metal stoma ring, blue elastic waist belt to secure ring, black rubber inflation device & 2 rubber collection bags with inflation tubing & metal connection 14 oz capacity.Colostomy Appliance/Davol/ Rubber company/ no 1376/14 oz capacitymedical, appliance

ORIGINAL BLACK & WHITE OF CLARANCE GERALD PARKINSON WEARING AUSTRALIAN WORLD WAR 1 ARMY UNIFORM, CAP AND LAPEL BADGES; LEG PUTTEES AND AMMUNITION BELT.PTE. CLARANCE GERALD PARKINSON - 7TH BATTALIONlocal history, photography, photographs, military

Jan Senbergs was born in Riga, Latvia, in 1939 and came to Australia when he was ten. Senbergs’ work has been characterised by a simple and bold aesthetic. From lush landscapes to barren urban spaces, his body of work signifies an artist who has continually experimented with shape, form and motif, a fundamental humanist vision, a finely-honed sense of the absurd, and a rigorous studio practice spanning printmaking, drawing and painting. Senbergs is Baldessin's exact contemporary. He was also born in Europe and fled his homeland because of the war, arriving in Melbourne in 1950. Like George, Senbergs also worked at the RMIT and in 1973 represented Australia at the Bienal de Sao Paulo. Senbergs first met George when he was living in St. Kilda. George asked if he could screen print his 'Argus' catalogue for a show at the gallery in the Argus building. George Baldessin (1939-1978) was born in San Biagio di Callalta, in the Veneto in Northern Italy and arrived in Australia ten years later. A printmaker and sculptor he built his bluestone studio at St Andrews (Nillumbik) in 1971. The bluestone studio was hand built by George, his partner Tess and the three Hails brothers, Rob, Doug and Don. Made of recycled materials the studio today contains all of George’s equipment including the large press, which he modelled himself with the help of Neil Jeffrey (Enjay Presses). George won many prizes throughout his career and is represented in many of Australia's public art collections including his famous 'Pears' sculpture in front of the National Gallery of Australia, Canberra. In 1975 he represented Australia in the Sao Paulo Biennale, before living and working in Paris until his return to St Andrews in 1977. In 1978 George was killed in a car accident aged 39 years. In 2001 Tess returned to St Andrews to reclaim the run-down studio and reconstitute it as The Baldessin Press & Studio - a printmaking retreat. It operates in George’s memory, so that artists may continue to create, perpetuating the generous spirit of George.'New Jersey - rust belt' is one of eight prints in the 'Baldessin & Friends commemorative folio. The folio was conceived by Tess Edwards as a fundraising initiative in celebration of the The Baldessin Press & Studio's fifteen year anniversary, and as a way to honour George Baldessin's memory. The Baldessin Press & Studio is a not-for-profit organisation created in memory of the late George Baldessin (1939-1978), whose original studio is now open to the public for creative use and as a practical legacy to living artists. The Studio is located in St Andrews, Nillumbik. The folio is a unique coming together of seven very different and acclaimed artists who are connected by their friendship to the missing eighth member, George Baldessin. This print finds its' origins in the time Senbergs spent at Harvard in America in 1989-90. In the context of Baldessin it explores an industrial urban surreal vision that was common to both artist. The image captures the life force of the city revealing the keen and observant eye of Jan Senbergs. Similar in sensibility to his large scale charcoal drawings of the 1990s, the artwork is not only a record of what the artist sees, but of what interest him. By following the movement of each line the viewer can witness the artist's eye travelling through, over and around each element of the urban landscape. The scale is deceptive with the image bled to the full-size of the sheet of paper like a microcosm of a much bigger whole. sugar lift etching of an urban (cityscape - New Jersey) scene - bridges, roads, buildings, in thick black brushstrokes. The image is busy; full of energy and movement. A bleed print in which the paper barely contains the city scape. In pencil (handwritten): top centre: left '14/25' (edition); centre 'New Jersey-Rustbelt' (title); right 'Jan Senbergs' (signature); print, sugarlift etching, urban landscape, ekphrasis2018, new jersey, line, rust belt

This dress belonged to Katherine Blair, a longtime resident of Brighton. Katherine Fennell Blair was born in April 1929 in Benalla to magistrate Douglas Granville Blair (1893-1976) and his wife Isabell Nora (“Billie”) Blair, nee McNamara (1895-1989). Katherine was a child when the family moved to Brighton, where she attended St Joan of Arc Catholic Primary School and Star of the Sea College. After school, Katherine worked as a secretary and PA for various companies in the Melbourne CBD. Following a working holiday in the UK in 1959-61, she returned to Brighton, living first with her parents at 14 Kilrush Street and later in Burrows Street. An active part of the local community, Katherine was a member of the Brighton Red Cross, Brighton Probus Club and the St Joan of Arc Catholic parish and choir.Long-sleeved black velvet dress with shallow v-neck and self-covered belt. Smocked at shoulders and either side of waist. Floral embroidery around neck, cuffs and above smocking at waist.katherine fennell blair, 1940s, 1950s

Wool picking machine designed to separate locks of wool before it is carded and spun. The picker opens the wool’s locks which makes it easier to send the fleece through a carding machine. It does this by teasing the fibres (which can also be done by hand just by pulling the lock structure apart), but a picker does this in bulk and much quicker than what can be done by hand. It is possible to spin fibres directly after the picking stage; however, it is usually more desirable to card and blend them with other fibres. Typically, at a textile mill, a picking machine can separate enough lengths of fibre for a full day’s work after just a single hour. It will also help to remove any vegetation matter or other any unwanted elements that may be present in the wool. The quality of the casting on this machine suggest that it was made locally, either in Australia or New Zealand. Mike Leggett, the donor of the machine, acquired it from New Zealand where the seller said it had been used by his father to pick wool to make hand stuffed horse saddles. Mike attempted to used it a couple of times to pick alpaca hair, but the speed of the attached motor caused damage to the fibres. The motor is thought to be an added attachment, sometime around the 1960s judging by its age, while the machine itself is thought to be dated around the 1920s. The machine works by inserting wool through the rollers. Initially there was a conveyor belt feeder system which was powered by the handle on the side. This conveyor belt has been removed however, most likely due to age and deterioration. Wool is now fed through the initial teeth and is met by a spiked rotating drum which works to separate the fibres. The separated fibres would then complete a loop of the drum before being dispatched somewhere below, around where the motor presently sits, at a rapid rate of speed. Typically this wool will be collected in a closet or large catchment area, as can be seen from the 8:47 minute marker in the linked video (link - https://www.youtube.com/watch?v=kMjx-t3tH3A). It is not apparent how the wool is collected with this machine. Red and green machine with four green legs currently attached to a wooden pallet with wheels for easy movement. The green legs lead up to a red central circular barrel from which many attachments are present. Also present on the wooden pallet is a small black motor which is attached by a rubber belt to the central drum inside the red barrel. The belt spins the wooden drum via a dark red circular plate attached to the side of the drum. On the other side of the red barrel, a green handle extends for turning the picker’s conveyor belt feeder system. Two green walls extend forward from the central red barrel, guarding either side of where the conveyor belt would have been. At the start of these walls is a wooden cylinder, which the conveyor belt would have wrapped around, followed by two interlocking gears which rotate and accept the fed wool. The red roof extends over the central cylinder from here, securing the wool inside and protecting hands from the heavily spiked internal wooden cylinder which rotates and separates (picks) the wool. Extending over the top of this red roof is a green handle which reaches to the back of the machine (not pictured). Here it accepts a weight to ensure pressure is always present for the initial feeder interlocked gear teeth. There are two large gear cogs on the rubber belt side of the machine and 3 small gear cogs on the handle side of the machine, all coloured green. A green handle is also present at the rear of the machine, below the location from which the weight is hanging. A power cable extends from the motor and there are two adjustable metal rods on the top of the machine, the purpose of these rods is presently unknown. Black texter. On top of drum. Wording: HG3707 Wording. Imprint: BRACEWIND BLYN On motor. Wording AEIwool picking, textile manufacturing, wool processing

Belonged to the donor's aunt or grandmother, she was born in 1888Black crepe evening dress, rouched bodice over bust. Tie rouched belt fastened with eight covered buttons. Back of bodice rouched and fastened with 21 covered buttons.costume, female

Collected by Dora Summers and worn by herWorn in 1930'sBlack 3cm elastic waist band overlaid with ecru lace. 20cm suspenders attached to waistband to hold up stockings.costume, female underwear

1958 Cotton short sleeved full length housecoat. Background in white with black lined check with pink full blown roses and buds with green leaves. Full circle skirt with square pocket on right side of skirt. Pocket has frill around three sides. There is a tie belt. It has a large revers with narrow frill around.A JONIVIC GOWN SSWcostume, female underwear

From Mitcham R S LA black dress jacket of D J Scarff. Jacket has metallic buttons. Gold cord epaulets over red with crown badge and R badge. Both lapels have 'unique' badges. Ribbons on left pocket with oak leaf badge. Belt with brass buckles. 14/6201. 16.10.51.4 Lapel on inside. A pair of trousers with red stripe down sides and button fly.14/6201 16 10.51.4uniforms, army

Donated by Margaret ScarlettRed and beige plastic belt. Plastic oblong beads in shape of wooden chips threaded on black cotton and attached to a wooden buckle with eyelets, threaded with cord to form a clasp. Cord has two balls with red and beige beads on the end.costume accessories, clothes accessories

This item was captured by H.Q. Coy, 2/14 Battalion at Balikpapan, Borneo 1945, probably by Tom Aldrick (given the inscription on the leather case). Tom Aldrick has donated other items taken from captured Japanese soldiers to the Dandenong-Cranbourne RSL.Black adjustable binoculars with brown leather strap and brown leather case with buckle strap. Case has blue/grey velvet lining and a leather belt strap. Clasp is missing. There is a Japanese inscription inside the case lid in black ink. Three Japanese characters are depicted. Adjacent to the right eyepiece there are also Japanese characters that have been inscribed into the surface with a sharp implement. Beige label adhered to front of case with "ALDRICK" handwritten in ink.binoculars, japanese binoculars, balikpapan, borneo, 1945