Showing 1369 items
matching handmade.
-
Beechworth Honey Archive
Beekeepers Veil
In the early days of beekeeping, protective veils were not worn. It was considered a sign of weakness if you could not put up with bee stings. This veil was made by Amy Robinson- her husband and his brother had no interest in putting up with being stung. The solid cloth at the back stops bee stings completely; the veil, while good, does not stop stings if it is pushed up against skin.Original handmade beekeepers veil belonging to Bill Robinson. Mended many times over by his wife Amy Robinson.Handmade beekeepers veil; metal mesh over front facing, cloth veil. Repaired with brown cotton. Very fragile.beekeeper, veil, antique, equiptment, beekeepers veil, beechworth honey -
Mont De Lancey
Textile - Doiley
A large white handmade open patterned crotched doiley used to protect furniture. It has a floral pattern and scalloped edge.doileys, household textiles, soft furnishings, table linen, tableware, table accessories -
Whitehorse Historical Society Inc.
Tool - Hand drill -stanley
Small hand 'stanley' drill with red dial with a handle and a wooden knob. A '104' drill, has a handmade replacement handle.C0525 0255 on Dialtools, hand drill, stanley -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, 1840s to 1878
This handmade black glass bottle was recovered between the late 1960s to early 1970s from the wreck of the sailing ship Loch Ard. The ship was wrecked in 1878 and its remains are located at Mutton Bird Island, near Port Campbell, Victoria and bottles of liquor were listed as part of the Loch Ard’s cargo. All glass is made from silica, which is found in quartz sand. The naturally occurring sand has impurities, such as iron, that determine the colour of the glass. Residual iron leads to green or amber-coloured glass and carbon in the sand makes that glass appear as ‘black’. A strong light behind the glass will show its colour as dark green or dark amber. This handmade bottle appears to have been made in a two-piece dip mould, with the molten glass blown into a seamless shoulder-height mould to give the body a uniform symmetrical shape and size. After the body is blown, the glass blower continues blowing free-form (without the mould) to form the shoulder and neck, then the base is pushed up with a tool, and the finish for the mouth is added with his tools. The dip mould gives the body a slightly textured surface, with the free-blown shoulders and neck being smoother and shinier. There is usually a line around the shoulder where the mould of the body meets the shoulder, and a lump or mark in the centre of the base, called a pontil mark, where the push-up tool was removed. The ship Loch Ard was built on the River Clyde in Scotland in 1873 for the prestigious Loch Line of colonial clipper ships, designed for the Australian run. It sailed from England on 1 March 1878 carrying 37 crew, 17 passengers and a diverse general cargo ranging from luxury items to bulk railway iron. On 1 June 1878, emerging from the fog and hearing too late the sound of breakers against the tall limestone cliffs, the vessel struck the southern foot of Mutton Bird Island and sank in 23 metres of water. Of the fifty-four people on board only two survived, one young male crewman, Tom Pearce, and one young female passenger, Eva Carmichael. This bottle is historically significant as an example of liquor bottles imported into to Colonial Victoria in the mid-1800s to early-1900s. The bottle is also significant for being part of Flagstaff Hill’s collection of artefacts from the Loch Ard, which is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. The collection is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417. The collection has additional significance because of the relationship between the objects, as together they have a high potential to interpret the story of the Loch Ard. The Loch Ard collection is archaeologically significant as the remains of a large international passenger and cargo ship. The Loch Ard collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The shipwreck is one of the worst, and best-known, shipwrecks in Victoria’s history.Bottle, black glass wine bottle with contents. Glass has ripples, crease lines and side seams. The mouth has a seal in place. The applied lip is wide. The base has been pushed-up base and has a pontil mark. Handmade with a ridge in the body around the base of the shoulder. The bottle has a white sticker.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, loch ard, mutton bird island, eva carmichael, tom pearce, john chance, bottle, antique bottle, bulge neck bottle, handmade, dip mould, mouth blown, pontil base, blown bottle, liquor bottle, ale bottle, black glass, black bottle -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, 1840s to 1870s
This small green bottle has been handmade by a glassblower and is the typical shape of a carbonated soda or mineral water bottle. It was made from 1840s-1870s. The bottle was found in the coastal waters of Victoria about 100 years from when it was made. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe and into molten glass at the end of it. The shape of the glass would be blown out to fit into the shape of the cylindrical dip mould. Once it set, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck and another ponty tool to push up and form the base. The bottle would be cracked off the end of the glassblower’s pipe and a blob of molten glass would be wrapped around the top of the neck and shaped to finish the lip of the bottle. The seal was usually a cork, held in place with a ball-wire fitting attached between the upper and lower parts of the neck finish. This style of handmade bottles usually had thick glass so that it could be heat-sterilised, then re-filled. The bottles would often have horizontal bubbles in the applied finish, caused by twisting the glass, and vertical bubbles and diagonal lines in the body from it being blown, and a pontil mark in the base where the ponty tool had been attached. Although the bottle is not linked to a particular shipwreck, it is recognised as being historically significant as an example of bottles imported for use in Colonial Victoria in the mid-to-late 1800s. The bottle is also significant as it was recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Bottle; green glass, soda or mineral water style, handmade. Applied finish, blob double ring collar; upper is wide and rounded, lower is a narrow ring. Diagonal lines in glass on neck and shoulder. Low shoulder mould seam. Body is matt and tapers inward towards base. Shoulder and neck are shiny. Push-up base with pontil mark. Uneven base. Bubble on top of lip. Sediment on inside surfaces. White rubbing line and scratches on outside. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, dip mould, mouth blown, pontil mark, 19th century bottle, collectable, soda bottle, mineral water bottle, green glass, blob finish, push-up base -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, 1840s to 1870s
This small green bottle has been handmade by a glassblower and is the typical shape of a carbonated soda or mineral water bottle. It was made from 1840s-1870s. The bottle was found in the coastal waters of Victoria about 100 years from when it was made. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing air through a long pipe and into molten glass at the end of it. The shape of the glass would be blown out to fit into the shape of the cylindrical dip mould. Once it set, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck and another ponty tool to push up and form the base. The bottle would be cracked off the end of the glassblower’s pipe and a blob of molten glass would be wrapped around the top of the neck and shaped to finish the lip of the bottle. The seal was usually a cork, held in place with a ball-wire fitting attached between the upper and lower parts of the neck finish. This style of handmade bottles usually had thick glass so that it could be heat-sterilised, then re-filled. The bottles would often have horizontal bubbles in the applied finish, caused by twisting the glass, and vertical bubbles and diagonal lines in the body from it being blown, and a pontil mark in the base where the ponty tool had been attached. Although the bottle is not linked to a particular shipwreck, it is recognised as being historically significant as an example of bottles imported for use in Colonial Victoria in the mid-to-late 1800s. The bottle is also significant as it was recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Bottle; green glass, soda or mineral water style, handmade. Rough applied finish, blob double ring collar; upper is wide and rounded, lower is a narrow ring. Diagonal lines in glass on neck. Low shoulder mould seam. Body is matt, tapers inward towards base. Shoulder and neck are shiny. Push-up base with pontil mark, visible through glass. Marks on heel, glass thickness varies. Uneven base. Bubble in glass. Sediment on inside surfaces. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, handmade, dip mould, mouth blown, pontil mark, 19th century bottle, collectable, soda bottle, mineral water bottle, green glass, blob finish, push-up base -
Mont De Lancey
Tool - Bush Rake, Unknown
Used circa 1890.A blacksmith handmade bush rake with a steel head and a handmade long wooden handle which was roughly hewn from tea-tree wood. The head with 11 prongs is attached to the handle by a fork shaped steel fitted extension with three rivets. It was used to rake up debris after clearing land circa 1890.gardening tools, gardening rakes, rakes, gardening equipment, domestic equipment, tools -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, Mid-to-late 1800s
This olive green bottle was handmade by a glassblower and is the typical shape of a ‘gallon’ type liquor bottle, which has the capacity of one-sixth of an imperial gallon, about 750ml. It was made around the mid-to-late 1800s. The bottle was recovered from an unnamed shipwreck in the coastal water of Victoria. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing into a long metal pipe or reed with a blob of molten glass at the end of it. The shape of the glass would be blown out to fit into the shape of the mould. Once it set, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck and another tool to finish the base. The bottle would be cracked off the end of the glassblower’s pipe and a blob of molten glass would be added to the top to form the mouth and lip of the bottle. The seal was usually a cork, often held in place with tape. Although the bottle is not linked to a particular shipwreck, it is recognised as being historically significant as an example of bottles imported for use in Colonial Victoria in the mid-to-late 1800s. The bottle is also significant as it was recovered by John Chance, a diver in Victoria’s coastal water in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Bottle, dark olive green glass, tall thin Gallon type. Lip is double; rounded upper, flared lower. Neck is slightly bulbous. Body has shoulder seam, then tapers inwards to base. Concave base with small pontil mark. No inscriptions. Handmade in mould. Body has sediment inside, top to bottom. Glass is worn down one side. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, gallon bottle, handmade, mouth blown, pontil mark, blown bottle, liquor bottle, 19th century bottle, collectable, olive glass, green glass, mould, 1800s bottle, bulbous neck -
Orbost & District Historical Society
camisole
A small handmade silk apricot coloured camisole with ribbon embroidery and lace over shirt. It has press studs for fastening at the backcamisole dressmaking female-underwear -
Federation University Historical Collection
Tool, Shoe Last
In 1920 the Ballarat School of Mines introduced a Shoemaking Course for repatriated World War one soldiers. The shoe last may have been used in the classes.Metal handmade shoe last, probably used for the repair of shoes. The smaller 'arm' may have gone into a heavy base blockworld war one, ballarat school of mines, repatriation, world war 1, shoemaking -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Clothing - Clothing, Lady's crepe negligee, c1920
This lady’s crepe negligee is an example of the dressmaking and lacework skills of the women of the early settlers families in Moorabbin Shire in the early 20th C Early settlers and market gardeners established their families in Moorabbin Shire and this item shows the skill and craftsmanship of the women of these families A lady's cream crepe full length short sleeved negligee is hand sewn with handmade lacework on bodice, neckline and sleeve cuffs. dressmaking, craftwork, lacework, early settlers, pioneers, market gardeners, moorabbin, bentleigh, cheltenham -
Uniting Church Archives - Synod of Victoria
Decorative object - Presbytery Banner, Late 1970s
Handmade patchwork banner with mid-blue cotton backing and edging. The patches ae from churches within the Presbytery of Yarra Valley.yarra valley presbytery -
Stawell Historical Society Inc
Memorabilia - Realia, 1930
Felt Lined Inlaid Woden Box with lid. Lock and key. Handmade Mr Waters to raise funds for Stawell Band 1930stawell -
Stawell Historical Society Inc
Clothing - Costume and Accessories, 1921
Pure Silk Petticoat Silk Embroidered with Flowers and Butterflies. Flounce hem. Handmade by Ruth Henderson. Wedding Petticoat. Chapman Family.stawell clothing material -
Stawell Historical Society Inc
Accessory - Costume and Accessories, c1920
White Linen Travelling Bag for brush and comb. Used for travelling. Lace insertion. Draw thread Lace. Handmade by June Mortyn. stawell clothing material -
Mont De Lancey
Clothing - Baby's dress, Unknown
The dress is on doll.A handmade cream coloured fine wool dress. It has blanket stitch hemming and crocheted lace around the neck, sleeve and hem.baby dresses, baby clothing -
Mont De Lancey
Tool - Hoe, Unknown
Used in the 19th Century A forged steel curved and straight blade headed hoe with a long handmade handle. It was used for chopping into the ground in the late 19th century.agricultural tools, hoes, gardening tools, gardening hoes, steel, wood -
Buninyong Visitor Information Centre
Artwork, other - Mug, Old Library Pottery Mug, GSC, Buninyong
The Old Library Pottery operated in the northern section of the Buninyong Visitor Information Centre during the 1980s. Dates to be confirmed. Handmade earthenware cylindrical shaped mug with handle finished in mottled light brown tones, with dark brown strip near the top.Old Library Potterypottery, ceramics -
Mont De Lancey
Container - Cane Sewing Basket, Happy Home, 1950's
The handmade basket has a variety of pieces of vintage sewing items as listed in the detailed Description. These would have been used in the home for repairs as well as pieces sewn. Mrs Pratt owned the sewing basket and it's contents - she lived in Beenak Road, Wandin, Victoria.An open rectangular shaped cane woven sewing basket with three bands of green and tan raffia woven around the sides. It had a lid which is missing but there is one twisted wire loop where the lid would have been attached. Inside are various pieces of vintage sewing items including; large and small cotton reels with cotton thread, very small cotton cardboard reels with thread, plastic container of pins, a handmade wooden darning mushroom, a brightly coloured tin of pins and needles, two short zips, a piece of embroidery material stamped with a pansy pattern to sew, a Birch brand packet of sewing needles, a Delyta brand "Nu-Bras" Brassiere Repair Set, two "Mendex" Cuff Savers for Men's Trousers, a Happy Home Needle Book with a few needles, and a paper pattern for Cross Stitch. See above for the brands and details of the sewing items included in the basket.containers, sewing, baskets, sewing equipment -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, Mid-to-late 1800s
This olive green bottle was handmade by a glassblower and is the typical shape of a ‘gallon’ type liquor bottle, which has the capacity of one-sixth of an imperial gallon, about 750ml. It was made around the mid-to-late 1800s. The bottle was recovered from an unnamed shipwreck in the coastal water of Victoria. It is part of the John Chance Collection. Glassblowers made bottles like this one by blowing into a long metal pipe or reed with a blob of molten glass at the end of it. The shape of the glass would be blown out to fit into the shape of the mould. Once it set, the glass was removed from the mould and the glassblower would continue using the pipe to create the neck and another tool to finish the base. The bottle would be cracked off the end of the glassblower’s pipe and a blob of molten glass would be added to the top to form the mouth and lip of the bottle. The seal was usually a cork, often held in place with tape. Although the bottle is not linked to a particular shipwreck, it is recognised as being historically significant as an example of bottles imported for use in Colonial Victoria in the mid-to-late 1800s. The bottle is also significant as it was recovered by John Chance, a diver in Victoria’s coastal water in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Bottle, dark olive green glass, tall thin Gallon type. Lip is straight, deep, with thin horizontal lines in glass. Neck has gradual flare, body has side seams, heel has uneven thickness, and base is concave, without pontil mark. No inscriptions. Glass has imperfections. Handmade in mould. Body has score marks and is worn down one side. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, gallon bottle, handmade, mouth blown, pontil mark, blown bottle, liquor bottle, 19th century bottle, collectable, olive glass, green glass, mould, 1800s bottle -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, 1880s to 1910s
This handmade green glass bottle was made using the turn-moulded or rotated-moulded method, a variation of the mould-blown process. The bottle has the remnants of a cork seal in its mouth. It possibly contained ginger beer, soda or mineral water, flavoured drinks, liquor or wine. TURN-MOULDED BOTTLE production method This bottle was handmade using the ‘turn-moulded’ process, one of a variety of mould-blown processes that followed the earlier mouth-blown method. The maker would add a portion of hot soft glass to the end of his blowpipe then blow air through the pipe while placing the end inside a bottle mould. The mould was then turned and twisted, giving the bottle a round, seamless body, and usually a round indented base. The cooled body of the bottle would then be finished with the addition of an applied top. A small amount of soft glass would be applied to the top of the bottle and a lip would be formed using a tooling implement. A concentric ring would also form below the lip, caused by the rotated lipping tool. The bases of bottles made with the turn-moulded method were generally not embossed but would commonly have a mamelon or ‘dot’ in the centre of the base. SEALING THE BOTTLE After filling this type of bottle with its contents it is then sealed with a straight, cylindrical cork with the aid of a hand operated tool called a bottle corker. The bottle corker compresses the cork as it is driven into the bottle. Once inside the bottle the cork expands evenly into the opening to tightly seal the contents – the denser the cork the better the seal. This turn-moulded glass bottle is made distinctive due to its round seamless body and indented base.Bottle, dark green glass. Handmade turn-moulded bottle with seamless body and tooled lip. Deeply indented base has push-up mark with a ‘mamelon’ bump in the centre. Bottle is straight from base to half height, then tapers to a shoulder over the next quarter, than almost straight up to the mouth. There is a portion of cork in the bottle’s mouth and dry remnants in the bottle’s base. Possibly used for ginger beer. Produced in 1880s to 1910’s. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, green glass bottle, handmade glass bottle, bottle with indented base, turn-moulded bottle, rotate-moulded bottle, tooled lip on bottle mouth, applied lip bottle, bottle corker -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, 1880s to 1910s
This handmade green glass bottle was made using the turn-moulded or rotated-moulded method, a variation of the mould-blown process. The bottle has the remnants of a cork seal in its mouth. It possibly contained ginger beer, soda or mineral water, flavoured drinks, liquor or wine. TURN-MOULDED BOTTLE production method This bottle was handmade using the ‘turn-moulded’ process, one of a variety of mould-blown processes that followed the earlier mouth-blown method. The maker would add a portion of hot soft glass to the end of his blowpipe then blow air through the pipe while placing the end inside a bottle mould. The mould was then turned and twisted, giving the bottle a round, seamless body, and usually a round indented base. The cooled body of the bottle would then be finished with the addition of an applied top. A small amount of soft glass would be applied to the top of the bottle and a lip would be formed using a tooling implement. A concentric ring would also form below the lip, caused by the rotated lipping tool. The bases of bottles made with the turn-moulded method were generally not embossed but would commonly have a mamelon or ‘dot’ in the centre of the base. SEALING THE BOTTLE After filling this type of bottle with its contents it is then sealed with a straight, cylindrical cork with the aid of a hand operated tool called a bottle corker. The bottle corker compresses the cork as it is driven into the bottle. Once inside the bottle the cork expands evenly into the opening to tightly seal the contents – the denser the cork the better the seal. This hand made, green glass bottle is representative of bottle making before mass production and is made distinctive due to its round seamless body and indented base.Bottle, dark green glass. Handmade turn-moulded bottle with seamless body and tooled lip. Deeply indented base has push-up mark with a ‘mamelon’ bump in the centre. Bottle is straight from base to half height, then tapers to a shoulder over the next quarter, than almost straight up to the mouth. There is a portion of cork in the bottle’s mouth and dry remnants in the bottle’s base. Possibly used for ginger beer. Produced in 1880s to 1910’s. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, green glass bottle, handmade glass bottle, bottle with indented base, turn-moulded bottle, rotate-moulded bottle, tooled lip on bottle mouth, applied lip bottle, bottle corker -
Orbost & District Historical Society
knobkerrie
A long and large handmade knobkerrie club of very dark, smooth with. It has a long handle and a large ball like club on one end.knobkerrie aboriginal hunting fishing club -
Phillip Island and District Historical Society Inc.
Wedding Dress, 1900
Worn by Mrs Sternholdt's Great AuntWhite lawn Wedding Dress (in case), lace insert, long sleeve, frill at neck and sleeves, back fastened with hooks and eyes - handmade.Display case presented by Smith's Beachcomber Assn. Inc. to commemorate the Bicentennary of Australia 1788 - 1988.australian history, costume, female, wedding dress, lace & lawn dress -
Orbost & District Historical Society
plant holder, Wilkinson, Dick
This item was made by Dick Wilkinson as a copy of simuilar article made during the Depression.Handmade ornamental metal pot plant holder made from painted milk tins. Curled metal decorations. Lined with milk tin.FRESH FROZEN PASTEURISED HOMOGENISED MILK. PRODUCT OF AUSTRALIA -inside DAIRY FARMERS CO-OPERATIVE LTD.container milk-tin plant-holder handcrafts -
Flagstaff Hill Maritime Museum and Village
Textile - Tray Cloth
Drawn Thread Tray Cloth, white, handmade, tatted lace edge. The cotton circular centre filled with a hand tatted lace pattern.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, tatting, tatted edge, tray cloth -
Flagstaff Hill Maritime Museum and Village
Plate
Plate ceramic round ornamental handmade. Coloured house, tree, water and boat. Has BEIRA REDONDO PORTUGAL No 6 on back of plate.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plate, beira redondo, ceramic plate -
Tatura Irrigation & Wartime Camps Museum
Bag Filler Rammer
Used on Crawford's farm (Woodlands) to top up bags of cereal when harvested before sewing the bags up. Ramming the pipe into the bag forces extra grain down into the lower areas.Handmade galvanised iron (tin) pipe with funnel at top with lid used to ram extra grain into filled bags to top up weight.bag filler rammer, crawford's farm, agricultural equipment -
Tatura Irrigation & Wartime Camps Museum
Top, 1940 - 1946
One of a pair. Wooden top handmade on lathe. One has blue, red, yellow and green paint. Used as a toy.(see C0230) -
Uniting Church Archives - Synod of Victoria
Communion glasses in tray
Handmade portable wood communion glasses tray with a turned wood handle. The tray has a small commemorative plaque and holds 40 glasses."In loving memory of MARION PATTERSON 8.6.1941" "SILVER"patterson, marion