Silver silk, with a jacquard woven floral pattern. Long sleeves have pleated tops, forming a leg-o-mutton sleeve, which gathers in at the elbows, to a narrow fitted sleeve to the wrist. A 4cm wide band of cream satin embroidered and corded lace. Cream cording and lace trims the cuffs, the shoulder/arm hole seam, and two bands on each side of the V shaped cross-over bodice. Metal press-studs fasten the cross over bodice at the waistline. Cream satin with embroidered lace overlay forms a 5cm wide stand-up collar and a centre front panel at neckline. Twelve metal hooks and eyes fasteners fasten the grey cotton front lining of the bodice. The cotton lining of the bodice is part machine, and part hand stitched. Relocated to Clothing Box 176 10.2.2022costume, female, silver silk and lace trimmed bodice.

Very fine embroidered silk, three tier skirt - silk embroidery in a swirl design, and featuring small tufts of pink silk. Front placket, and narrow 1.25cm tape waistband. Metal hook and eye fasteners, and two metak hooks at back waistband to fasten bodice. Back sweeps into a small train. Two rows of joined lace form three panels from waist to lower tier. This lace also forms two L shaped decorative panels on upper section of skirt. Lower edge of silk lining has a band of stiffening, which then has an 18cm wide band of pink silk lining the hemline. This pink fabric matches the pink tufts on the fine silk outer layer, and possibly protects the finer fabric at the hemline level. Embroidered silk lace, in two bands sewn together, trims the hemline. PART OF WEDDING OUTFIT 11400.780; 782costume, female, cream silk full length wedding skirt

Ladies waist length black satin boned bodice. Chelsea style collar forming V shaped neckline dipping to eight cm above the waist. Centre insert of horizontal pintucked fabric extends at centre front from throat to just above wrist. Fastened at centre front with thirteen metal hooks and eyes and crossover fastened on LHS with four hooks and eyes. Bodice is lined with black cotton fabric. Collar extends over shoulders to form imitation collar at back extending to centre back waistline. Centre V shaped insert of pintucked fabric hand stitched in place. Nine fabric encased bones inserted into waistband. Two bones on either side of front of bodice, and one bone on each side seam and three bones across the back of the bodice. Stand-up collar with horizontal pleating (5cm wide). Fastened over left shoulder with three metal hooks and eyes. Long sleeves widening at elbow and gathered onto 25 cm lower sleeve narrowing to wrist. Lower sleeve has three X three groups of horizontal pintucks. Slit at wrist - eight cm fastened with two metal hooks and eyes.costume, female, ladies black satin boned bodice

Light camel coloured silk (in very poor condition). Long sleeves overlaid with fine black lace in a floral design. Stand-up collar, five cm deep is overlaid with the fine black lace, and finished with a corded braid on the upper edge. Sleeves are tightly gathered at the shoulder tapering narrow at the wrist, giving a ''leg-o-mutton'' effect. 12cm wide fine black lace, attached at the neck edge, and shoulders, forms a ''puff'' decorative over the shoulder, and continues in a ''over-panel'' to the waistline. Ten x 1cm diameter plastic buttons, with a floral impression in them (2 missing) and 12 hand stitched button holes form the front opening. From the lower opening, six ''pintucks'' 12 cm deep, open into pleats at the lower edge, giving fullness to the bodice. Four metal hooks are evident on the lower tucked front and seven hand stitched eyelets are indicated, but are now severely damaged. Bodice is boned with ten X 17cm long bones, and is fully lined with cotton.A tiny 8cmX7.5cm, oval-at-one-end, pocket is stitched into the front opening, at the bustline. Back hemline dips to a V shape at centre backcostume, female, victorian bodice - cinamon coloured silk

Fitted bodice with 1.5 cm deep stand-up collar. Long curved sleeve, tapering at the wrist, has a fine piping around the armhole. Wrist is trimmed with a piped, plain silver peaked false cuff, and two 3 cm deep pleated and piped ''frills''. Three covered buttons trim the diagonally cut decorative cuff. One metal hook, and hand stitched loop on the stand-up collar. 23 covered buttons ( one missing,others in various states of disrepair) extend from the neckline to the lower skirt. Front skirt is trimmed with a 7 cm deep band of plain silver silk, bordered by the striped fabric piping, and a 3 cm deep pleated frill on either side. Below this is a 25cm deep band of the striped fabric, at the lower edge of which are sewn four X 5 cm deep bands of pleated frills. At the centre back neckline are two X 20cm ''tails'' curved at each end and lined in plain silver silk. These are to be wrapped around the neckline, and fastened with a metal hook and eye, to form a 4cm deep rounded silver collar. Skirt back extends into a 34cm deep train. Brown cotton tape binds the hemline. Front of skirt is ruched from the centre buttoned section, in three sections either side, to the centre back panel, which is pleated, and extends into the train. Back waistline is trimmed with a 14cm wide bow, striped fabric, lined with plain silver fabric.A 7cm wide, and 34 cm long loop is stitched into the centre back seam, presumably used to hold, and lift the train above the ground. (The ends of the bow are trimmed with 10 cm deep black and silver fringing.) One metal ''bone'' in left front dart(now causing damage). One tiny 5.5cmX5.5cm shield shaped pocket on left front. Dress fully lined with cotton fabric.costume, female, victorian silver striped long silk dress

Narrow fox fur collar. Pointed 1 cm wide 'skin' nose, which forms the upper part of the enclosed metal clip fasten the collar (squeeze lever on inside). Two glass eyes. A corded ''chain'' finished with a woven toggle, and a cord covered hook fasten the fur around the neckline or shoulders. Ruched ribbon trims both ends of the crepe type cotton(?) lining '' tail'' has fur threaded onto a linen thread.costume accessories, female, red fox fur collar

As the Yarra became unsuitable as a source of water, several attempts were made to find alternative sources for the growing population of Melbourne. It was not until 1891 that the efforts to sewer Melbourne came to fruition with the setting up of the Melbourne Metropolitan Board of Works (MMBW), now known as Melbourne Water. From 1891 until 1992, it was the responsibility of the MMBW to safeguard public health by providing a sewerage system and a safe water supply system. In 1992, The MMBW merged with a number of smaller urban water authorities to form Melbourne Water.This hand tool is of historical significance for its association with the former Melbourne and Metropolitan Board of Works (MMBW). This tool is a rare surviving object of standard Board issued equipment. It is significant for its representativeness of the theme of Technology in building Victoria's industries and workforce, which continues to resonate strongly within Melbourne Water today.MMBW hand tool, "Pick" with wooden handle and 'MMBW 'stamped on the metal head.melbourne water, mmbw, melbourne metropolitan board of works, pick axe, construction, work, staff, equipment, technology

Used by Dr Nance (Senior) of Colac,Victoriaand donaated by his son Dr Nance, who practised as a general practitioner in euamris, grauating form the University of Melbourne in 1956. Dr Nance gave his collection of instruments and some of his father's instruments to Dr Geoff Bishop in 1996.Cervical Dilation kit,A set of 16 metal cervical dilators, graduaaaated sizes, in a metal case, manufacturer "WATVic/ George Carsberg LTD/ London". Victoria .cervical dilation

Clothing.Woman's black silk blouse. Bodice is made up of two layers. Inner layer of black cotton has full length front opening with placket with five buttons and button holes from 5cm below round neckline to 5cm above the waist. There is a breast pocket on the LHS (14cm X 11cm). The outer layer of black silk is attached to the inner layer at the shoulders (pleated) and around the arm holes, and hand stitched at the lower back to form a casing for cotton tape ties. The front forms a full width crossover with one metal hook on top LHS. The outer layer extends 7 cm below the inner layer at the waist with a 7cm peplum across the back. Set in long sleeves are tapered at the wrist with a 5 cm frill at the hem. Sleeves fully lined. Hand and machine stitched. Fold over collar (10cm) with squared corners.Decorative black , gold and pearl button on each wrist on hem.costume, female, woman's black silk blouse.

Clothing. Woman's black ribbed silk bodice, fully ;lined with black cotton fabric. High round neckline with stand up lined lace collar (4cm), fastened left of centre at front with two metal hooks and eyes. Front lining fastened with twelve metal hooks and eyes from throat to waistband. Waistband (5.5cm) of horizontal pleated fabric. Small pocket (8cm X 6cm) attached to inside lining on LHS. Waistband has 7 cm cross over tab section at centre front fastened with three metal hooks and eyes. Centre front opening is edged with black lace and tucked spotted voile, fastened with three metal hooks and eyes.A wide shawl collar across the shoulders extends and gathers into the waistband at front and back. This forms a V shaped opening at the front exposing the lace and voile beneath.The inner and outer edges of the collars have decorative knots. The centre of the collars have 18cm pin tucks from the shoulder seam at the front and 11 cm pin tucks at the back.At centre back. a panel of black lace runs from the collar to the hem of the waistband. Two gathered fabric tails are attached at centre back to hang below the hem of the waistband. Decorative lace as stitched across the shawl collar at the shoulders seams, ending with a decorative knot and cotton tassell (7cm). Set in Leg 'o'Mutton sleeves are gathered around the arm holes and gathered into a band of fabric with decorative lace and knots. The narrow lower section has a turned over hem edged with decorative knots and black lace. Each sleeve has a 5cm slit at the wrist. The bodice has fifteen bone casings spaced across the garment, from the waistband. These are stitched in place with yellow cotton. Some internal seams finished with yellow cotton. Hand stitched. Word ''GLEN" is written on one bone casing. Temporary darts have been stitched on both side seams with red cotton to reduce the size.costume, female, woman's black ribbed silk bodice.

Dr Mitchell Henry O'Sullivan worked in the Victorian country town of Casterton as a general practitioner from 1919 until his death in 1977. He also practiced obstetrics. His son, Dr David More O'Sullivan donated his obstetric bag and its contents to the College in 1999. The bag and contents are a unique time capsule of the type of instruments and pharmaceuticals used in the inter-war period.Hypodermic glass syringe (.1) with three hypodermic needles (.2 - .4) and metal storage case (.5 - .6). Barrel of syringe is marked from with measurements from 0-20. .2 is a needle head with a rounded flange tapering towards the needle shaft. .3 and .4 are needle heads with flattened oval bulbs, attached to a round bead which holds the needle shaft. The case is oval in shape with the word 'Crystal' engraved diagonally into the top of the lid. There are two fixings attached inside the bottom of the case which form a cradle for the storage of the syringe.'Crystal'

Metal statue of a figure holding a baby. Figure and baby take the form of stick figures, with thin metal bodies and hexagonal bolts for their heads. The larger figure is holding the baby by ankles in its right hand, dangling the baby head down in front of its torso. Sticker on underside of base of statue reads 'Handcrafted/By/ROCK CREEK/METAL CRAFT/P.O Box 39/Hansen, Idaho 83334/USA'.

This instrument was part of a collection of instruments used by Dr Michael Kloss in his medical practice. Dr Kloss subsequently donated this collection to the College.Metal uterine catheter. Thin, small, curved instrument in the shape of a narrow tube. There is a circular fitting at one end of the tube, and the tube curves as it reaches a rounded, hollow tip at the other end. A strip of metal topped by a rounded fitting extends from the hollow end of the tube, forming a circular loop.obstetrics

This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Ten small glass specimen bottles enclosed in a cardboard box. Box is green and white in colour and the front of the box is printed with the text 'GIBCO DIAGNOSTICS'. Reverse of box is printed with the details of the manufacturer. One end of box is labelled 'Batch No./14' and has a sticker attached labelled 'STUART'S TRANSPORT MEDIUM', with space on the label to enter a patient's name, the specimen and the date. Instruction printed on box below sticker reads 'Store in cool dark place'. The specimen jars are identical, each being made of glass with a metal screw top lids. Each jar has a 'STUART'S TRANSPORT MEDIUM' label attached, identical to the one attached to the end of the box. The inside of nine of the bottles is discoloured with some form of residue, possibly as a result of the evaporation of a substance inside. One bottle is full, containing an undetermined liquid.

The evolution of endotracheal intubation for anaesthesia was a slow process. Franz Kuhn (1806-1929), a head and neck surgeon working in Kassel, Germany, between 1902 and 1911, is said to have done more than any other to obtain general recognition for endotracheal anaesthesia. Kuhn's tube, is a flexible metal one inserted on a stilette which was then withdrawn. The tube was then secured with an elastic neck strap and connected by a rubber tube to a Trendelenburg cone. The glottis was packed with oiled gauze. Metal spiral tube with elaborate handle at one end and rounded at the other. There is a metal clasp at the base of the handle which all forms part of the endotracheal tube. Inside the tube is a curved metal piece that functions as an introducer.kuhn, endotracheal, airway, intubation

The glass phial contained liquid ethyl chloride, little pressure being required to liquefy the gas at room temperature. By directing the nozzle downwards at the skin or mucous membrane to be analgesed, a stream of liquid squirts out, vaporising on contact, thus producing transient local temperatures of approximately -10 qc. Ether's unpleasant smell agitated patients. Ethyl chloride's pleasant odour reduced agitation. It could be used for induction and worked quickly without irritating respiratory passages. Ethyl chloride spray could also be used as a local anaesthetic. Faded rectangular burgundy box containing a glass phial with metal and rubber lid that forms a spray nozzle. The lid of the box had a mustard coloured manufacturer's label wtih burgundy writing. The phial has a discoloured white label with red writing and a blue label with white writing.Printed in white ink on blue label: IMPORTANT / NOT DESTROY THIS TUBE, IT CAN / BE REFILLED FOR / 2/10bengue & co. ltd., london, ethyl chloride, 1900, local anaesthesia

Before mechanisation, pills were rolled by hand using equipment such as this pill press. Powders ingredients were blended together to form a resin, rolled and laid across the width of the platform. The paddle was then used to push the "sausage" shape through the grooves, creating a small, consistently sized and shaped, pill. The pill was then allowed to dry for later sale. This pill press is of uncertain origins but is representative of the type of equipment used to create pills in the 19th Century. It has the capacity to make 24 pills at once, and markings on the metal plate indicate each pill would have been the equivalent of "5 grains" (approx 0.3 grams).Rectangular wooden platform with a metal (brass) plate divided into 24 (twenty-four) grooves with a catchment area. The wooden paddle has two handles, one on each end, with a matching metal plate and grooves, as well as metal (brass) guide bars to help the paddle align with the platform.Handwritten on base of platform in black ink over white background: C11087 Handwritten on inside of guide bar on paddle in black ink over white background: C11087 Manufacturer's detail stamped into metal groove on platform: S. MAW SON / & / THOMPSON / LONDONpill press, pharmaceuticals, apothecary, pharmacy

This is a large metal framework covered in gauze, the whole mask completely enclosing the patient's face excluding any possibility of carbon dioxide being excreted. This object was found in the possession of the Italian Army in Libya in 1940, and donated to the museum by Dr Geoffrey Kaye. Gustave Julliard, of Geneva, after a death from chloroform had occurred in his practice, abandoned the use of that anaesthetic and adopted ether. He administered it from a large, wire frame, the outside of which was covered with waxed cloth to make it impermeable to air, the inside with surgical gauze on to which the ether was poured. Large metal wire frame mask, covered in waxed paper, with gauze wrapped around the rim to prevent ether leaking out, effectively forming a rebreathing apparatus.ether, carbon dioxide, italian army, libya, 1940

The Bird Mark 4 is an anaesthesia assistor or controller with pressure and volume controller to be driven by a respirator. Combination of Mark 4 with respirator makes an automatic anaesthesia respirator eliminating manual bagging. The machine can work through Boyle anaesthetic system. It is designed for both paediatric and adult application. (Drugs and Equipment in Anaesthesia Practice, Aruna Parameswari, 2019)Green metal box atop a clear plastic unit with a black bellows inside, which forms one part of the overall unit. The unit is attached to a pole, enabling height adjustment. The pole is, in turn, attached to a set of four castors [not original].White text on black stick on strip on top of metal box: DO NOT PULL APART / FOR USE IN THEATRE ONLY A series of instructions are printed in white text over the unit.anaesthesia assistor, anaesthesia controller, pressure controller, volume controller, paediatric, adult

The Heywood Water Board was constituted on 1 July 1984 under the Water And Sewerage(Restructuring) Act 1983 and amalgamated the previous authorities of Heywood Waterworks Trust and the Heywood Sewerage Authority. The Heywood Water Board was abolished on 1 July 1994 under the Water Act 1989 when it amalgamated with Port Fairy Water Board and Portland Water Board to form Portland Coast Regional Water Authority.A cast iron seal press, . This was used by Heywood Water Board to emboss agreements and official documents. Die is still attached to the press. It reads: Heywood Water Board 1984Antique cast iron seal embossing press , painted brown colour, silver coloured metal dieHeywood Water Board 1984public administration, restructure, amalgamation, water board, water supply, sewerage, heywood

Heywood Waterworks Trust was constituted on 20 November 1962 upon application by Councillors of the Shire of Portland to construct, manage and maintain the works for the supply of water to the township of Heywood. The Trust was abolished on 1 July 1984 under the Water and Sewerage (Restructuring) Act 1983 when it amalgamated with the Heywood Sewerage Authority to form Heywood Water BoardA cast iron seal press, . This was used by Heywood Waterworks Trust to emboss agreements and official documents. Die is still attached to the press. It reads: Heywood Waterworks Trust 1963Small metal machine painted black and mounted onto a black rubber base. Two dies are attached with the seal of Heywood Waterworks Trust. Paper is placed between the dies, the handle depressed and the seal embossed on the paper under pressure as a blind (inkless) embossing. The seal consists of two circles with the wording "Heywood Waterworks Trust".Heywood Waterworks Trust 1963/ Excello / Reg Trade Mark/ Seal Press/ Pat NO 420419/Size No 2/Inscription on rubber base: "EXCELLO SEAL PRESS" / REGD TRADE MARK / 1. PATENT ROLLER BEARING HANDLE PAT. NO. 420419 / 2. DURABLE PLASTIC COUNTER / 3. RUBBER DESK PROTECTOR / STANDARD RUBBER TYPE CO. LTD. / TOKYO JAPAN"heywood, public administration, water supply, amalgamations

Velvet Soap was a widely used laundry bar soap launched in 1906, produced by J. Kitchen & Sons, owned by John Ambrose Kitchen (1835 - 1922). Kitchen was born in Britain and emigrated to Victoria in 1854. After a less than successful period at the Caledonian and Blackwood diggings, Kitchen returned to Melbourne and joined his father and brothers in establishing a tallow candle making works. Through merger and expansion the company became the pre-eminent manufacturer of soap and candles in the eastern colonies in the mid to late 19th century. Kitchen also speculated in a number of enterprises but suffered financial setbacks as a result of the 1890s bank crashes. Despite this, the company continued to grow in the early twentieth century with the introduction of products such as Velvet Soap and Solvol. The company merged with the British company Lever Bros in 1914 who eventually took full control of the company in 1924, becoming Lever and Kitchen. Advertising for Velvet Soap in Australia was extensive and pervasive. All manner of surfaces were used to advertise the product such as building walls, roofs, and most commonly, enamelled sheet metal signs which were fastened to any available surface internally and externally. The most common form of sign that Velvet Soap used was the words 'PURE VELVET SOAP' in white lettering within a vivid dark blue, elongated Maltese cross. On the enamelled metal signs the Maltese cross sat on a red background with a yellow border. While this was the dominant form for Velvet Soap signs, there were variations from the standard. The Velvet Soap sign is of historical significance as a representative of painted signs that were once a common form of advertising during the nineteenth and early twentieth centuries. - : http://vhd.heritagecouncil.vic.gov.au/places/14447#sthash.Vb6KAUWl.dpufHistoric - Advertising Sign - Velvet SoapTin sign with white, yellow, red and blue enamel. Pure velvet soap.puffing billy, enamel sign, pure velvet soap

Station Sign - Emerald Emerald Station is situated on the Puffing Billy Railway in Victoria, Australia. It was opened with the Railway on 18 December 1900 and comprised a platform track and a loop siding. A passing loop was added between the two a few years later. There was also a spur siding off the Down end of No. 3 Road. Two standard 12 ft by 20 ft timber portable station buildings with a Van Goods Shed between (all adjoining) were provided on the platform and a Goods Shed on the No. 3 Road loop siding. Other buildings included Tea Rooms, lamp room and toilets along with a cattle race and loading bank. The station building was later reduced in length by one of the portables which housed the General and Ladies' waiting rooms. Emerald today remains very similar to the early days, but has had other Roads added into a Carriage Workshops, a turntable and storage sidings. Also, a Signal and Telegraph Branch depot in the form of a large Goods Shed and a multi-purpose yard building in the form of a Locomotive Depot administration building have been added. During 2009, the station building underwent stage one of an internal restoration to its former glory. ref: https://en.wikipedia.org/wiki/Emerald_railway_station,_Victoria photos at http://www.vicrailstations.com/Gembrook/Emerald/Emerald.html Historic - Victorian Railways Station sign used at Emerald Station Station Sign - Emerald Metal rectangle Station Name Sign with white enamel back ground and black lettersEmeraldstation sign, puffing billy, emerald station

This hand operated drill was used to drill holes in the rails so that with fishplates (metal joiners) the rails could be bolted together to form a continuous length.Historic - Railways Permanent Way and Works - track equipment - Hand Operated Rail Drill Hand Operated Rail Drill made of cast Metalpuffing billy, hand operated rail drill

This Jones sewing machine was one of the few sewing machines that accompanied the Germans who were deported from Palestine in 1941 to Australia where they were interned at Tatura. The machine was owned by Nelly Wied (nee Glenk). See notes in Item receipt form.Lid is plywood constructed with domed top. Brown handle on top and a clip each end to fasten to machine base. Machine is on a wooden base with clips on each end to fasten to lid. Right hand side of machine has a rectangular hole with wooden lid and brown wooden knob. To keep accessories in. Machine is made from metal, painted black and has fancy gold patterns on front right, "Jones" in gold and gold design around the metal base. It has a silver turning wheelJONESjones sewing machine, palestine germans, german templers, palestine internees, templer internees, nelly wied, nelly glenk, helmut glenk, tatura internment camps