Metal cylinder for storing map or documents with hinged lid on both ends, painted black.domestic equipment, containers, document

The splitter's axe was used to cleave timber apart into shingles or palings. A timber handle or haft would have been inserted through the socket. The cast iron blade was placed vertically into the timber end. The blade was then driven into the timber with a rough mallet while the haft was used to guide the split along the grain. As the timber split, the haft could be twisted to lever the two pieces apart. This tool is sometimes called a froe or frow.Machine made, painted black, cast. No handle. Shows signs of use. Socket warpedchurchill island, farm, tool, tools, splitter, splitter's, axe, paling, shingle

Presented to mayor as a memento of Century of ClunesCarved light coloured wood, varnished, with axe mounted on it. Axe head is painted black.To the Mayor, Cr. Lean Celebrating the Century ....1838 - 1939......century, 1939, cr. lean, mayor, memento, clunes

Used by horse rider for control of horse and safe movements of horseManufactured and retailed by Holden and Frost Ca1900Horse shoe shaped metal with flat base to support foot of rider. Painted blackstirrup, equine

Used over horse collar Ca1900 to attach to horse cartImported and sold by Holden and FrostSteel painted black hames with bracket hook with kangaroo imprint with leather strap and buckleKangaroo imprint on hookequine, collar, hames

Refers to the service of G.F. Pierce DCM number 2839 Cat No 1891PPhotograph- is in an old wooden frame. The photo show three Aust soldiers, two standing, one sitting. Uniform- slough hats, shiny boots. The photo is surrounded with a red, white and blue ribbon, then surrounded with a sort of red ensign. The frame is wooden with a mixture of black paint and gold. The rear has two screw eyes and a small piece of brass wire. PIERCE. G. F. Is first on left.ww1, australian soldiers

Historically this item was before electricity lighting was available. There is no protection around the candle to prevent wind or air movement from extinguishing the candle flame therefore this means of night illumination was used within a house environment. It could be easily moved from room to room but would have insignificant "candle power" to lighten more than a few metres around it. This item was before kerosene lamps, gas lighting and electric/battery lamps This candle holder would have been used within the homes of Kiewa residences to illuminate the way from room to room where there were no other forms of lighting available. As it is relatively light in weight and with a finger/s grip it is highly portable and was in time replaced by battery powered torches. It was used in a period where home, or local made candles were a necessity of living. This Item was used before battery powered torches were invented. Although candles are still used in the late 20th and after, their fundamental use has changed and they function more as a mood enhancement item or as a back up for an electrical power failure and the alternative battery powered torch also runs out of power.1. This small basin shaped candle holder is formed of metal and sealed with a pale grey enamel skin. It has a black painted edge and finger holder. It has a raised vertical spout for the securing of the candle. The bottom of the basin is contoured from the candle base to the outer edge to allow for melted candle wax to be safely held within the basin. 2. As above. The handle is rusty but otherwise in good condition. candle-holder, portable light enamel household goods

Semi circular sign with mild steel metal strap for use at tram stops and fixed around a pole. Painted on heavy metal sheet. Red band top and bottom, smaller band at top with words HAIL TRAM HERE in black paint on a white background. Used on Ballarat system until 9/1971. Has a black back. See original worksheet for sketch and dimensions. Two copies held.trams, tramways, ballarat trams, secv, street furniture, tram stops

A Wilson Speed Flo racquet, with 'SUPER-FLEX SHAFT', red painted throat and shaft, black-painted shoulder undersides, perforated black leather grip, and white cloth butt cover with red-stitched 'W' trademark. Inscription: WILSON/SPEED FLO/SPEED FLEX/FIBRE FACE. Materials: Wood, Nylon, Glue, Lacquer, Metal, Leather, Adhesive tape, Paint, Ink, String, Cloth, Ribbontennis

Replica Builders Plate, sign - cast brass with raised letters within two raised lines and four screw holes in each corner. Black painted background. "Designed and Manufactured at the Tramways Board Workshops Preston" Two copies held, both within plastic heat sealed envelopes with small label "Replica $20-" Produced by Tony Smith of the MTPA, c2010, cast by Hasco Foundry, Ballarat.trams, tramways, signs, tramcars, tramcar bodies, mmtb, new trams

A Cigar cutter? Or Button Stamper? The blade/stamper is missing. Has a black wooden handle. It is constructed of steel, painted black with gold painted patterning, displaying flowers and leaves. The base is 18cm x 8xm and the height is 15cm Previously numbered #113.

Black matt painted oval frame with scalloped edge and floral decoration. Picture of 1900s+ woman singing wearing long skirt with jacket and hat. Black and white photograph.

Wooden box, painted black with straps for canister, leather handle and metal latches, missing lidCheney/ Englandport melbourne authority (pma)

The Portland Stevedoring Company took over from the "Pier Spring Trust" in 1923. Members of the new company were: W.S. Williamson, Solicitor; Capt. D.W. Hislop, Harbour Master, C.V. Parkinson, Borthwicks Manager. The Portland Stevedoring Company serviced about 3 vessels, and was then taken over by the Victorian Stevedoring Company. They were responsible for servicing vessels. Portland Harbour Trust took over moorings on 2/2/1960.Steel and bronze press, painted black with gold highlights with press-down handle and hollow base.

Belonged to Mary Gilbert who was a passionate local historian. She was awarded a British Empire medal in recognition of her work for education and the community. . Mary Isabelle Gilbert was born in 1905 in Orbost, Australia. She was born to John Gilbert and Annie Cameron Gilbert, and had seven sisters and one brother. Four siblings died at a young age. .She was a teacher historian loved and respected by her family and the wider community.This item has aesthetic significance. It was owned by Mary Gilbert, a prominent Orbost personality, the first curator of the Orbost Museum. Handmade, tall carved wooden vase painted red. Bush scene painted black with pokerwork.vase ornament-wood gilbert-mary

This McMillan Tobacco Cutter was used to cut plugs of tobacco suitable for pipes.Tobacco cutters were important tools for pipe smokers until self-made or manufactured cigarettes began to dominate the tobacco sales market from the 1920s. This item is a link to a previously common means of consuming tobacco.Large wooden block inset with metal tobacco cutter. It has a metal handle and is painted black.tobacco-cutter smoking-accessories personal-effects

A fender is part of the hardware used in open fireplaces to prevent the fire from spilling out of the fireplace. Wood fires were the main source of domestic heating in the 19th century.This fender is significant for its association with domestic heating in the 19th and early 20th century.Fire fender, cast iron, painted black, sides bolted onto front as is base plateflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, shipwreck coast, great ocean road, fire fender, fire guard, domestic heating, fender

T. & C. Clark & Company Limited was based at Shakespeare Foundry in Wolverhampton England and was founded in 1795 by Thomas and Charles Clark. The company grew to be one of the largest iron foundries in Wolverhampton and were pioneering in the manufacture of enamelled cast iron cookware and sanitary wares. The company's product range included thousands of items, both domestic and industrial. T. & C. Clark were pioneers in the use of enamelled cast ironware, after taking out a patent in 1839 guaranteeing their products to be free of lead or arsenic. The company became the largest employer in Wolverhampton employing between 600 to 700 people.The item is significant as it was used as a domestic kitchen item to boil water safely without the concern that the metal may contain lead or arsenic as earlier cooking utensils had. Cast Iron Kettle straight metal handle painted black. Rusted inside and holed in the bottom, "T C Clark England" RD665876, 3 quarts No3" and other unreadable inscriptions.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, flagstaff hill maritime village, great ocean road, kettle, iron kettle, kitchen ware, t c clark, enamel cook ware, cast iron kettle

Households from the 18th century onwards used a hot iron to removed wrinkles and creases in fabric such as clothing, table and bed linen This simple iron stand provided a rest for a hot iron between use during an ironing session and a place for the iron to cool when the session was completed. This item is associated with domestic life during the 19th and early 20th centuries. Triangular shaped stand made from metal rods welded together at feet. Painted black.flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, iron stand, triangular iron stand, ironing, laundry equipment

The first classroom uses of large blackboards are difficult to date, but they were used for music education and composition in Europe as far back as the 16th century.The term "blackboard" is attested in English from the mid-18th century; the Oxford English Dictionary provides a citation from 1739, to write "with Chalk on a black-Board". The first attested use of chalk on blackboard in the United States dates to 1801, in a lecture course in mathematics given by George Baron. James Pillans has been credited with the invention of coloured chalk (1814); he had a recipe with ground chalk, dyes and porridge! The use of blackboards did change methods of education. Manufacturing of slate blackboards began by the 1840s. A green porcelain enamel surface was first used in 1930, and as this type of board became popular, the word "chalkboard" appeared. Various types of easel have been in use since ancient times, in particular for supporting paintings and other artwork. However, the schoolroom easel would have been introduced around the same time as when the blackboard started to be used in educational establishments. Wooden board painted black, resting on wooden easel with rope supporting the three easel legs.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

NoneMetal hat or wig box probably used to store a ceremonial hat of some kind or legal wig significance unknown at this time.Metal round hat or wig box with hinged lid. Small handle on top & painted black.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Metal, plastic, pale blue paint, black and silver knobs, On/Off switch, morse keyNS No. 5805-99580-8558 Key telegraph F.I.L.71 Ser.No 2353signals, trainer

Flat head screwdriver with surface rust, and a black wooden handle; paint worn off handlechurchill island, tool, screwdriver

8713.1 - Large metal hole puncher painted black, the handle area is a rounded triangular shape. 8713.1 - MADE IN LEITZ GERMANY

Wooden 4-legged table, painted pale green around top with legs painted black.

Train Instrument transportation Box used for the transporting of Flaman Speed Indicator and Recorder to the repair workshops The Flaman Speed Indicator and Recorder was a device patented in 1901 by Nicolas Charles Eugène Flaman of France for indicating the current speed of a vehicle (for example a railway locomotive) and recording it on a paper tape that could be unrolled and examined at the end of a run to provide evidence of the speeds attained on the journey. Design features: The paper tape recording was driven directly by the wheels of the locomotive, with the paper spool moving at a fixed rate per kilometre travelled. Three graphs were recorded, the first being time elapsed (with the trace moving vertically if the train was stationary), the second being a speed curve. and the third recording the driver's attentiveness to signals ("Vigilance") by marking one tick above a line when the driver depressed a button, and another below the line when the engine went over the signal ramp. Data recorded: Read together, it was possible to determine exactly what speed the locomotive had been travelling at any point in time or distance. As well as allowing study of locomotive performance, it also allowed greater scrutiny of the observance of the driver of speed restrictions along the line and attentiveness to signals. It was practice on some railways such as the Victorian Railways in Australia for the driver to sign the speed chart prior to departure.Historic - Victorian Railways - Train Instrument transportation Box for the transporting of Flaman Speed Indicator and Recorder to the repair workshopsLarge wooden box with wrought iron fittings, painted black with white lettering on side panels. RETURN TO / TOOL ROOM / NEWPORTpuffing billy, train instrument transportation box, victorian railways, flaman speed indicator and recorder

Model Rolls Royce Silver Wraith originally painted black. Wheels missing. Perspex windows.150/Dinky toys/Rolls Royce Silver Wraith/Made in England/Meccano Ltd.toys, general