Wooden sliding ruler used to measure the length of folded bolts of cloth. Ruler is diamond shaped with numbers on the four sides. Sliding arm has numbers on the metal and the arm itself.Putnams Cloth Chart Copyrighted 1898. Patent pending

Used by Mr. Craven to survey agricultural land in the Goulburn Valley for the purposes of setting out farm irrigation channels and check banksStanlley Dumpy Level on tripod, complete with carrying case and sixteen foot telescopic staffPatent Stanlley, Great Turnside, Holborn, London 11182surveying, irrigation, terrestrial

Hand Pump. Reticulated water did not reach Diamond Creek until 1914. This beautiflly restored hand pump raised water from the outside domed well to provide cool clear water for domestic use.The Hand Pump is a well preserved example of equipment used domestically in the Diamond Creek areaHand pump used for pumping water from shallow wells. Restored by Kim Howard in 1996. Green. Column is screwed to base which is mounted on Redgum planks.PATENTED 1842, W & B DOUGLAS, "MIDD'A CONN.#handpump, #waterpump, #domesticuse

At tall metal structure with a bucket shape attached to a hollow pipe for the grain to run through. A metal badge yuMetal badge patent No 1441 613/07/p

Domestic Meat Mincer, Popular in the 19th - 20th CenturyFunnel type feed to a horizontal screw feed mechanism operated by a Hand crank.MFG.Co. Phil'a USA. Patented 5/6/1888

Found, stored on-site.Wooden frame with inscriptions, mainly indecipherable. Has vice on each side at base. No rollers. See mangle rollers DM3163 and DM2977, these fit into frame."PATENT / Sept.3. 1867 / may 13 1868

Robin Boyd developed a close friendship with the founder of the Bauhaus in Weimar Germany, Walter Gropius, who had moved to the USA in the 1930s. Through this connection, Boyd was invited to be the Massachusetts Institute of Technology (MIT) Bemis Professor at the School in the North American academic year 1956-7. Robin and Patricia Boyd, with their youngest daughter Suzy, were based in Cambridge, Massachusetts for the year. Boyd gave some lectures at MIT and he was also invited to give lectures at many other universities, allowing him to travel widely within the USA, especially on the East Coast. This gave him the opportunity to meet architects like Frank Lloyd Wright, Eero Saarinen, Paul Rudolph and many others, and visit the offices of Skidmore, Owings and Merrill, and places like Taliesin and the General Motors Technical Center Detroit. On the way home, the Boyds visited London, Berlin, Paris and Le Corbusier’s Ronchamp Chapel in France.Colour slide in a mount. Memorial Church of Harvard University, Cambridge, Massachusetts, USA, 1932. (Architects: Coolidge, Shepley, Bulfinch and Abbott.)Made in USA / Patented / 04819 / Encircled 10F (Handwritten)mit bemis professorship, mit, robin boyd, slide

The Kacoonda Carder subjected to patent action Australian madehart-davis(deceased), ms mary - kacoonda enterprises

Static wooden knife cleaner, with a brass plaque. Two pieces of wood with a cork inner piece, held together by elastic bands."J.L. Hinks Knife Cleaner Patented" on the brass plaque.

A separator is a centrifugal device that separates milk into cream and skimmed milk. Separation was commonly performed on farms in the past. Most farmers milked a few cows, usually by hand, and separated milk with a hand operated machine for domestic use. The milk was poured into the bowl on the top and the handle had to then be turned fast enough to get the separator up to speed adequate to separate the cream and the milk. The milk would come out of one spigot and the cream out of the other. In general practice some of the skimmed milk was consumed by the family, while the rest may have been used to feed calves and pigs. Enough cream was saved to make butter, and the excess was sold. In many cases excess could be bartered or swapped with neighbours for other items of produce. ALFA-LAVAL SEPARATORS The principal works and head office of Aktiebolaget Separator was established by Gustaf de Laval in Stockholm. The first Laval milk separator was patented in1884. In Australia three old established firms commenced pioneering the Alfa Laval cream separators in about 1885. These were A. W. Sandford & Co. Ltd., in Adelaide, J. Bartram & Son, of Melbourne, who have ever since been the Victorian agents of Aktiebolaget Separator. In New South Wales and Queensland, the pioneering firm was Waugh & Josephson Ltd. J. Bartram & Son, the distributor of the separator in this collection, established their business in Melbourne in 1881. In 1892 Bartram & Son estimated that 1,130 of these machines were operating throughout Victoria. This item is significant as it is representative of domestic and dairying machinery used throughout rural areas of Australia in the early to mid 20th century.The separator is made in 3 sections. The base is made from cast iron. The cover and vat are made from silver painted tin. There are 2 outlet spouts. The detachable handle, made from cast iron and wood, is held in place by a screw. A name plate featuring the Victorian distributor, J Bartram & Son of Melbourne and a plate outlining patent information are attached to the base by screws.Around edge of wheel "Aktiebolaget Separator Stockholm/ 2236"dairying industry, dairy machinery, milk separators

Displayed in History HouseGlass bottle with moulded words on side. Impressed semi-spherical pattern near neck, forming a marble and rubber ring stopper (marble still in bottle) (possibly Dobson Patent type).Front: E. Rowlands/Ballarat/Melbourne/Katoomba/and/Sydney.bottle, domestic

Nickel/Chrome plate. Patent No 104593. Two dials. Wristband added later? (1930's wristband?). In box marked 'F Band & Son Geelong'. Attached to band of different era.watch, digital

Hollow metal lawn roller, with painted green frame, and Hungerford 'Flexigrip' rubber handlegrips. Handlegrips are U.S. patented 2.618.986, issued 25 November, 1952. Materials: Metal, Rubber, Painttennis

Durham Duplex cream and steel razor with plastic handle. Has three interchangeable blades in cardboard box. Patented July 4 1911. Plus blue plastic case with red top. cut-throat razors, shaving equipment

Portable D.C. voltmeter and ammeter (0-130V, 0-100 A), Evershed's patent in a wooden case. Information and warnings on inside of lid. Adjusting knobs on each end. Metal opening lid on top.Serial No. 40102 Brass disc with warning on top of box.voltmeter, ammeter, physics, electrical engineering, portable

'Magic cream tube' - device for siphoning off the cream from bottled milk where the cream has risen to the top. Made in England ca. 1940. Original card with instructions for use. Patented.domestic equipment, food storage & preservation

Part of the laparoscopy equipment donated by Dr Geoff Bishop. Dr Geoffrey Bishop, whilst at the Department of O and G, University of Liverpool, UK, began laparoscopy in 1969. On returning to Australia, Bishop and Grimwade together with Mr Peter Paterson introduced gynaecological laparoscopy to Melbourne, practising at the Queen Victoria Memorial Hospital (QVMH), Melbourne in 1969. The College, through the Victorian State Committee of the Australian Council, RCOG, ran training courses in laparoscopy for local and interstate gynaecologists. These were conducted by Bishop, Grimwade and Paterson. They established protocols, with particular reference to safety, for the conduct of laparoscopy. Laparoscopy was used initially for diagnosis and for limited treatment using diathermy for conditions such as endometriosis. The real impetus came with the great upsurge of tubal sterilization in the early 1970s. Early techniques included diathermy and division of the Fallopian tubes using the Palmer forceps. [Dr Peter Renou, former honoury curator.]This Spackman's cannula was used by Dr Geoff Bishop during gynaecological laparscopioc surgery.He used this decice as a uterine elevator. Also, for testing tubal patency by inserting dye through it. Manufacturers stamp: ANAX.laparoscopy, tubal ligation, infertility investigation

An empty Wright & Ditson (USA) 'Championship' lawn tennis balls box. Patents listed on box: pat No 1146523 (1915); Pat No 1566974 (1925) and Pat No 1593211 (1926). Materials: Cardboard, Inktennis

This is a pocket spring balance. It would have been used last century in our district by market gardeners, hawkers and other itinerant workers and possibly also used in some small businesses. In households it could also be useful for weighing jam fruit, vegetables etc. Spring balances are still in use today.This item is retained as an example of a spring balance manufactured 80 or more years ago.This is a set of spring balance scales. The spring is fixed at one end with a hook attached to hold an object to be weighed. The top end has a ring to hang the scales up. The spring mechanism is enclosed by a steel cover. The front scale face is made of brass and both this face and the rear spring casing are fastened by three rivets. On the front is a spring-loaded blade which has equally spaced scale markings next to it on one side. This item is much rusted. ‘Hughes Pocket Balance’ ‘Patent’ Scale Markings:- ‘0 to 25’ pocket spring balances, household items of the past., history of warrnambool

This gong was used by staff to call guests to meals at Kalimna Guesthouse. A gong used at Kalimna Guest House to notify guests that a meal was ready . The four metal striking plates sit on a wooden base with four round metal cylinders inserted. Thin nylon rope separates the metal plates from the wood. There are two fittings to allow the gong to be held on the wall.Made by J.C. Deanna . Inc Chicago Patented Madel in USAkalimna guest house, guesthouses, kalimna

This gong was used by staff to call guests to meals at Kalimna Guesthouse. A gong used at Kalimna Guest House to notify guests that a meal was ready . The four metal striking plates sit on a wooden base with four round metal cylinders inserted. Thin nylon rope separates the metal plates from the wood. There are two fittings to allow the gong to be held on the wall.Made by J.C. Deanna . Inc Chicago Patented Madel in USAkalimna guest house, guesthouses, kalimna

White china plate with fluted and gilded edges decorated with flowers, crossed flags and a portrait of a military officer with medals in centre. Titled General Sir Redvers H Buller VC GCB KCMG PCPatented England Grindley & Co Oct 31st 99 USAdomestic equipment, table setting, plate

l.r; BAXTER'S/PATENT/OIL/PRINTING/11 NORTHAMPTON SQUAREqueen victoria, royalty, british royal family, leader, monarchy, gown crown, portrait, work on paper, print

Robin Boyd developed a close friendship with the founder of the Bauhaus in Weimar Germany, Walter Gropius, who had moved to the USA in the 1930s. Through this connection, Boyd was invited to be the Massachusetts Institute of Technology (MIT) Bemis Professor at the School in the North American academic year 1956-7. Robin and Patricia Boyd, with their youngest daughter Suzy, were based in Cambridge, Massachusetts for the year. Boyd gave some lectures at MIT and he was also invited to give lectures at many other universities, allowing him to travel widely within the USA, especially on the East Coast. This gave him the opportunity to meet architects like Frank Lloyd Wright, Eero Saarinen, Paul Rudolph and many others, and visit the offices of Skidmore, Owings and Merrill, and places like Taliesin and the General Motors Technical Center Detroit. On the way home, the Boyds visited London, Berlin, Paris and Le Corbusier’s Ronchamp Chapel in France.Colour slide in a mount. Unknown location, USA (see also items S0471, S0472, S0515)Made in USA / Patented / Encircled 10 (Handwritten) / 6 (Handwritten)mit bemis professorship, mit, robin boyd, slide

Robin Boyd developed a close friendship with the founder of the Bauhaus in Weimar Germany, Walter Gropius, who had moved to the USA in the 1930s. Through this connection, Boyd was invited to be the Massachusetts Institute of Technology (MIT) Bemis Professor at the School in the North American academic year 1956-7. Robin and Patricia Boyd, with their youngest daughter Suzy, were based in Cambridge, Massachusetts for the year. Boyd gave some lectures at MIT and he was also invited to give lectures at many other universities, allowing him to travel widely within the USA, especially on the East Coast. This gave him the opportunity to meet architects like Frank Lloyd Wright, Eero Saarinen, Paul Rudolph and many others, and visit the offices of Skidmore, Owings and Merrill, and places like Taliesin and the General Motors Technical Center Detroit. On the way home, the Boyds visited London, Berlin, Paris and Le Corbusier’s Ronchamp Chapel in France.Colour slide in a mount. Mormon Meeting House, Longfellow Park, Cambridge, Massachusetts, USA, 1956Made in USA / Patented / 04819 / D (Handwritten) / 1 (Handwritten)mit bemis professorship, mit, robin boyd, slide

Robin Boyd developed a close friendship with the founder of the Bauhaus in Weimar Germany, Walter Gropius, who had moved to the USA in the 1930s. Through this connection, Boyd was invited to be the Massachusetts Institute of Technology (MIT) Bemis Professor at the School in the North American academic year 1956-7. Robin and Patricia Boyd, with their youngest daughter Suzy, were based in Cambridge, Massachusetts for the year. Boyd gave some lectures at MIT and he was also invited to give lectures at many other universities, allowing him to travel widely within the USA, especially on the East Coast. This gave him the opportunity to meet architects like Frank Lloyd Wright, Eero Saarinen, Paul Rudolph and many others, and visit the offices of Skidmore, Owings and Merrill, and places like Taliesin and the General Motors Technical Center Detroit. On the way home, the Boyds visited London, Berlin, Paris and Le Corbusier’s Ronchamp Chapel in France.Colour slide in a mount. Speculative housing, likely built by Levitt & Sons in the 1950s, USAMade in USA/ Patented/ 04819/ D (Handwritten)/ 9A (Handwritten)mit bemis professorship, mit, robin boyd, slide