A digital copy of a colour photograph of the timber tramway bridge along the Michaeldene Walking Track near Marysville in Victoria.A digital copy of a colour photograph of the timber tramway bridge along the Michaeldene Walking Track near Marysville in Victoria. The Michaeldene Trail to Taggerty River Lookout is a 4.3 kilometer lightly trafficked loop trail located near Marysville, Victoria. The track is one of several walking tracks located in and around Marysville in Victoria.timber tramway, michaeldene walking track, marysville, victoria, walking track

A digital copy of a colour photograph of the timber tramway bridge along the Michaeldene Walking Track near Marysville in Victoria.A digital copy of a colour photograph of the timber tramway bridge along the Michaeldene Walking Track near Marysville in Victoria. The Michaeldene Trail to Taggerty River Lookout is a 4.3 kilometer lightly trafficked loop trail located near Marysville, Victoria. The track is one of several walking tracks located in and around Marysville in Victoria.timber tramway, michaeldene walking track, marysville, victoria, walking track

This folder of documents was created by Bonang Timbers at their Waygara mill.Orbost has historically been based on the timber industry, but that industry has declined considerably over the last 20 years. Many Orbost men worked at the Waygara timber mills. The number of locals involved in the timber industry has declined and many of the mills have closed. This item reflects a time when that industry was a significant contributor to the economy of the district.A lever arch folder. The cover is a mottled dark grey colour. It contains copies of delivery dockets , called "Log Dockets", coming in to Bonang Timbers.on spine - label - "Log Cartage 1993"timber-industry-east-gippsland bonang-timbers

The original small, pioneer cottage was built in the late 1840s to early1850s, by an unknown pioneer. It was located on part of a 30 Acre allotment that was originally part of Dendy’s Special Survey granted in 1841. The doors and window sashes, (made of red deal joinery timber), as well as the brass locks and fittings, are from the original cottage, and were imported from England. The fire-place bricks are from the original cottage, and are sun-dried, (not kiln fired), and are hand-made. Convict marks can be seen on two bricks. There is a small display of external cladding shingles from the original pioneer cottage. These shingles were hand-split, and most likely made from locally collected timber The nails included in this display were used to fasten the shingles on the original cottage, and are also hand-made. The cottage was occupied by William Box and family from 1865 until 1914 when it was sold to William Reitman who resided there until 1950. The enamel nameplate, “Colonial”, on the wall of the cottage, was the name chosen for the original pioneer cottage by Mr William Reitman, when he purchased the property in around 1915, for 1200 Pounds approximately. In 1974 Mr Lewis, a timber specialist, found the dilapidated building on property he had recently purchased in Jasper Rd and suggested it be reconstructed and relocated. Moorabbin Council agreed and the cottage was rebuilt just about 250 metres from its original site. The cost of the rebuild was met by 'Victoria's 150th Committee, plus a small grant from the City of Moorabbin, and Mr Laurie Lewis donated much of the timber for the reconstruction. The re-constructed cottage plan has followed faithfully the original dimensions, and plan of the original pioneer cottage, and as many original items from that cottage’s long occupation have been incorporated. The photographs in Album 1 record the progress of the reconstruction from February 1984 to the First Public Open Day November 18th 1984 This photograph shows the 'Box Cottage' in the Lewis Timber Co Ltd property in 1977 where it is being used as a storage room for timber. Mrs H Deam and Mr A. Smith, CMHS members, photographed the progress of the 'Reconstruction' from February 1984 to November 1984. Although 'Box Cottage' is a re-construction, it is an unique museum that, being located in the midst of a modern community in Ormond Victoria, can educate and demonstrate many aspects of the early settler’s way of life in Victoria. As such, it is an invaluable resource for students and all kinds of visitors.A colour photograph of the ‘Cottage’ in the yard of the Lewis Timber Co P/L Jasper Road, Ormond, in 1977 where it is being used as a storage area for timber.brighton, moorabbin, cottages, pioneers, ormond, colonial, mckinnon, dendy henry, box william, box elizabeth, reitman william, convicts lewis timber co. ltd., deam h, museums, box alonzo, smith a,

Mr Arthur Dunstan established a sawmill at Glen Wills in 1931 which operated for about 16 years. A larger and more modern sawmill with drying kilns was erected at Eskdale in 1947. He was contracted to build Wodonga’s municipal saleyards in 1935, followed by the Wangaratta saleyards which created so many forward orders that he bought a large block of land on the corner of Beechworth and Tallangatta Roads and opened a timber mill and hardware store. In 1974 other sawmills opened in Tallangatta Road near Chapple Street to cope with the expanding business. A large proportion of the company’s timber output was processed at the Wodonga yards into flooring, weatherboards, mouldings, and practically the whole output was distributed locally and throughout the Riverina and eastern freeboard of New South Wales, and Canberra. At its peak Dunstan’s was one of the biggest sawmilling businesses in Victoria and in Wodonga employed 150 people and milled 16,000,000 super feet of timber annually. Arthur Dunstan died in 1963 and the business was carried on by his sons Arthur Jr, Jack and Les, together with Reg McDermott and Neil Carr. Dunstan’s timber yards in Wodonga were sold to Ezard Industries in 1987 with the retail section being bought by BBC Hardware. Hardy’s took over the timber yard in 1989 and staff was gradually reduced to 51 by 1991. Processing fell to 1000-1200 tonnes of pine a month by 1992 and Hardy’s, by then part of Pacific Dunlop, finally closed operations in that year with the loss of the remaining 27 jobs. The area where Dunstan’s was located is now known as Southside.A black and white photo of a retail buildinga and workshopOn shopfront: DUNSTAN A & SONS HARDWARE JOINERY & TIMBER MERCHANTS RICKSHAW MAGICOLOR We stock and recommend HARDIES FIBROLITE SHERWIN WILLIAMS PAINT FINISHESdunstan's hardware wodonga, wodonga businesses, dunstan's timber

A colour photograph of the timber tramway bridge along the Michaeldene Walking Track near Marysville in Victoria.A colour photograph of the timber tramway bridge along the Michaeldene Walking Track near Marysville in Victoria. The Michaeldene Trail to Taggerty River Lookout is a 4.3 kilometer lightly trafficked loop trail located near Marysville, Victoria. The track is one of several walking tracks located in and around Marysville in Victoria.1996timber tramway, michaeldene walking track, marysville, victoria, walking track

THIS PHOTOGRAPH IS OF 1939 CENTENARY OF CLUNES STREET PARADE, BLACK AND WHITE HORSES , WITH RIDERS IN FANCY DRESS.BLACK AND WHITE PHOTOGRAPH OF PARADE OF HORSES AND PEOPLE IN SERVICE ST. CLUNESA. ARNOLD TIMBER MERCHANTlocal history, photography, photographs, shops, auction mart, events and celebrations, back to clunes

This photograph was probably taken at the site of McKay Creek Power Station. Excavation of this site did not commence until 1951 but road access(a narrow track) was provided in 1948 and widened in 1954. The logs would have been milled for timber at the State Electricity Commission's mill at Howman's Gap and thus provided a much needed source of timber for construction of camps and houses as there was a general of shortage of this commodity. Because of trouble with landslides in this area, a decision was made to place the machine hall of the power station underground instead of on the surface. Restricted financial resources and the repositioning of the power station retarded construction activities and it was not completed until early 1961.. An excellent pictorial record of the general working conditions, type of machinery and vehicles in use in the 1950/s.Black and white photograph showing logging equipment, fallen logs.Handwritten on the back of the photograph "Logging at McKay Creek)logging, mckay creek, timber, machinery

Timber Cottage circa 1881 at 35 Ingrams Road, Research.Printed Real Estate brochure of 'Illilawa', Ingrams Road, Kangaroo Ground featuring pretty stucco and timber cottage, bay windows, open fireplaces, loads of charm and character.houses, research, illilawa, ingrams road

Originally known as Smith's Siding, in November 1914 the siding was renamed "Pettits" following the sale of a nearby mill to the north. The sawn timber was initially carted out by bullock wagon but the mud and slush caused such difficulties that Pettits caused a thirty chain incline to be built from the mill to a tramway. The tramway connected the mill to the railway until 1924. An annual average of 2,450 tonnes of timber was despatched from the siding. No provision was made for passenger traffic. After ten years Pettit Brothers had cut out the area and moved on, abandoning the siding which was put out of commission on 23 September 1924. However, local residents, not wishing to suffer the loss of railway facilities, managed to have the siding reopened in February 1925 for goods and passengers. It was lightly patronised until all traffic ceased in 1936. B/W. Sam Knox, timber loader and tallyman, and George Pritchard, a teamster, resting at Pettit's Siding after delivering a six-horse-drawn load of timber to the Siding. Stacks of wood awaiting transport by rail are in the background.pettits siding; wyelangta; railways; smith's siding; sam knox; george pritchard;

c1880 This tiny tape measure, in Imperial measurements, was part of a Victorian era lady's sewing basket. The case is of polished timber, and the little winder, to retract the tape, is made of brass with a small ivory handleEarly settlers and market gardeners of Moorabbin Shire had to be self reliant producing their own food and making their farm equipment and clothing. The women of these families were skilful in all craftwork.c1880 this tiny, retractable, tape measure, in Imperial measure, is made of polished timber with a brass winder and ivory handle. Imperial ‘inch’ measurements on tape dressmaking, tape measure, sewing, craftwork, pioneers, early settlers, market gardeners, moorabbin, brighton, bentleigh cheltenham

An agricultural tool used by loggers, or farmers, the log splitting wedge has been used for thousands of years and was originally made from stone. They were either driven straight into the wood or into a previously made incision with the blade parallel to the grain. Using a sledgehammer or other tool hammered onto the flat end, the wedge is forced deeper into the log until the force splits the timber.Timber splitting wedge; steel; commercially made; has relief groove.timber splitting, churchill island heritage farm, olinda, shady creek

Constructed with timber from the wreck of the Pribislaw by3-masted ship modeled on the Pribislaw and constructed from this ship's wood, salvaged in the Shetland Islands. On timber base with descriptive panel. Ship complete with trimmings - German flag, sails, ladders, steering wheel etc.In printed type, cut out and stuck onto the back end of the model ship 'Pribislaw' and 'Hamburg'.maritime technology, model ships, pribislaw, 1849, 1850, german migration, model ship, hamburg

These plans were used by POW Sawmills, Newmerella, probably owned at the time by Henry's Timber Company. Hec Pow and his father sold the Newmerella mill to Henry Silverberg and Les Grace. The mill is currently owned by Mectec.Orbost has historically been based on the timber industry, but that industry has declined considerably over the last 20 years. The number of locals involved in the timber industry has declined and many of the mills have closed. This item reflects a time when that industry was a significant contributor to the economy of the district.Eight large plans for various sections of POW's at Newmerella. The plans were drawn up for Bonang Timbers and Bowman.2317.2 - on back in pen "REC 24/9/80" 2317.3 - on back in red pen "INCOMPLETE SET OF PLANS" ; sticker with "Shire of Orbost Compulsory Inspection" 2317.5 - "DODD" in red ink (John H. Dodd Pty Ltd)

House was demolished May 1997 to make way for RSL car park extension. Local information says house built c1900. Internal wall lining was of wall paper covered hessian attached to rough sawn timber.|Also second Photograph taken in Spring.Colour photograph of Ivy Cottage, taken early Autumn. Previously home of Bell Family in Grey Street. Timber dwelling has hipped roof with small gable at ridge, veranda across front supported by white timber veranda posts. Lakes Entrance Victoriahouses

Jane and Samuel Delley emigrated to Australia in 1857. By 1870 they and their young family had settled in the area at the entrance of the Fyans Valley and on the west of Fyans Creek. There they built a home and recognising the needs of passing travellers and timber-getters, they established Delley's Inn, providing food and refreshments to all in need.Timber dwelling with bark roof and two chimneys, one at either side of the house. In front stand four men and two women with two wagon drays in the foreground. The area is enclosed by picket fencing close to the house and a rough timber fence on the rear of the boundary. Delley's Inn,1870 on reverse in pencilbuildings, houses, accommodation, delley's inn

Frank Guy took timber and piles from Gippsland to Melbourne for wharf constructionSepia photograph of the masted barquentine Frank Guy with sails up being towed out the entrance by the S S Stormbird. Timber entrance piers quite distinct. Lakes Entrance Victoriawaterways, boats and boating, tourism

A colour photograph of the timber tramway bridge along the Michaeldene Walking Track near Marysville in Victoria.A colour photograph of the timber tramway bridge along the Michaeldene Walking Track near Marysville in Victoria. The Michaeldene Trail to Taggerty River Lookout is a 4.3 kilometer lightly trafficked loop trail located near Marysville, Victoria. The track is one of several walking tracks located in and around Marysville in Victoria.MARYSVILLE JANUARY 1964timber tramway, michaeldene walking track, marysville, victoria, walking track

Malaysian Kris with scabbardOrnate timber scabbard for decoration

The house used to be the residence of Mr. Arthur Peake, owner of Peake and Cox, timber merchants, Mitcham. The house was on one side of Whitehorse Road and the mill was directly opposite. The Catholic Church built a primary school on the timber mill site and the teaching sisters lived in the house, which has now been demolished to make way for flatsColoured photograph of a house at 459 Whitehorse Rd. Mitcham, that had been built for Mr. Arthur Peake, timber merchant of Mitcham. House has 2 adobe-style archeswhitehorse road mitcham, no. 459 peake, arthur.timber merchants

The Donchi family has been cutting sleepers since the 1890s in the Orbost area. This photograph , one of a set of six, was taken for an article in the Victorian railways Magazine in 1975. This was a pamphlet produced for Victorian Railways. . It contains photographs and an article about Orbost as "Timber Country" and a detailed article titled, " Cutting Sleepers is a Family Business" which tells about the Donchi family.This item is associated with the timber and sleeper-cutting industry in the Orbost Region. Timber sleepers were superceded by concrete sleepers in c. 1970s. Orbost has historically been based on the timber industry, but that industry has declined considerably over the last 20 years..The number of locals involved in the timber industry has declined and many of the mills have closed. This item reflects a time when that industry was a significant contributor to the economy of the district.A black / white photograph of a bush scene of a timber harvesting coupe used by the Donchi family.on back - Pr 8766sleeper-cutting-orbost donchi-orbost timber-industry-orbost

This tool is used to clamp and hold pieces of timber together during the process of joining or compressing two pieces of timber together. The first block is stationary and attached to the end of the base while the second block moves with the turning of a long screw. It is used also in the process of bookbinding with a similar holding intent.An interesting object with a specific purpose which is still in working order.Wooden triangular shaped block which is divided in two pieces with one piece being moveable with the turning of a turned wooden screw device. It is quite heavy which would suggest that the timber is quite dense warrnambool, wood press, mitre press, book binding press,

R J Russell operated a timber and hardware store in Koroit Street Warrnambool around the 1950’s. He succeeded from Newcombe Pty Ltd which had operated a timber and hardware store on the site (the present Target store) from the 1870’s. The business continued to trade under the Newcombe name after the death of Newcombe around 1900.A common well used item with links to a local business.Wooden yard ruler with markings in one eigthth inch measurements and numbered in inches. Text written in black on both sides.On front side: J Russell Pty Ltd. Timber and hardware merchants 148 Koroit Street Warrnambool. Phone 22. On reverse: Fencing materials, general hardware, paints, oils , Glass. Contractors or builders. Phone 22r j russell warrnambool, newcombe pty ltd warrnambool, timber yards warrnambool

A history of the Rubicon forestHardcover. Green dust cover. Front cover photograph is Krauss 0-4-OWT, builder's No. 2459 of 1891, takes water at the western end of Rubicon Lane in 1934. Driver Bob Rees attends to his engine while brakeman Hayden looks on. End papers show a photograph of a man standing besides a timber railway trolley holding onto the brake lever. There is a group of men, some sitting and some standing, on piles of cut timber under a large, open shed in the background. There are also some small, timber, tent like structures standing next to the railway tracks. There is a forest in the far background. Written in white is the line "Mr Clarke & Kidd's Sawmill".Stamp of the Marysville & District Historical Society Inc / PO Box 22 / Marysville 3779 Signed by the author, Peter Evansrubicon, timber, sawmill, railway, tramway, clarke and pearce, evans, peter

The Donchi family has ben involved in sleeper cutting in the Orbost district since the 1890s. This phootograph , one of a set of six, was taken for the Victorian Railways Magazine, August,1975, a pamphlet produced for Victorian Railways. It contains photographs and an article about Orbost as "Timber Country" and a detailed article titled, " Cutting Sleepers is a Family Business" which tells about the Donchi family.Name Associated with the timber and sleeper-cutting industry in the Orbost Region. Timber sleepers were superceded by concrete sleepers in c. 1970s. Orbost has historically been based on the timber industry, but that industry has declined considerably over the last 20 years. The number of locals involved in the timber industry has declined and many of the mills have closed. This item reflects a time when that industry was a significant contributor to the economy of the district.A black / white photograph of Pat, Ken and Alan Donchi working a large saw at a timber coupe in Orbost.on back - Pr 8767timber-industry-orbost sleeper-cutting-orbost donchi-family

Port of Portland Authority archives.Front: (no inscriptions) Back: Poles in the background. Timber treatment plant in middle. Mills at background. Photography by the Arthur Studio. Further copies always obtainable at 27 Commercial St. East, Mt. Gambier. (purple stamp, lower right) (upper left, pencil), 22 (lower right, pencil).port of portland archives

Used in Building Studies at Ballarat School of Mines. The sander used to sand rough timber smooth, remove old finish from wood, put a bevel on a door, reduce the thickness of timber, dress up a poor saw cut. Also used for back cutting miter cuts for neater joints and for polishing and cutting.Stainless steel with rollers and sanding plate. Hand held. Continuous loop of sandpaper would be mounted.Maker's Plate: MILLER FALL TOOLS CATALOG 830 3 INCH BELT SANDER MODEM "C" USE 3" X 21" BELT 230/250 VOLTS 3 AMPS 25-60 CYCLES MADE IN USA PATENT 2,991,595 MILLER FALLS COMPANY, GREEFIELDS, MASS. TO CHANGE BELT PULL LEVER DIRECTION OF BELT ballarat school of mines, building studies, david flintoff, timber, smooth, miter cuts, polishing, buffing, thinning