1 RAR plaque made of light wood, the RAR badge is in the centre of the blue symbol, the metal plate on the top has the writing "presented to 5/6 RVR SGT's Mess By 1RAR SGT's Mess"

The Lochaber Ax fixed on to the wood board. The Lochaber axe was used by infantrymen to 'pull people off their high horse', it contains the champion company since 2005, although it was not given to any company for numbers of years.

Used in the 19th centuryA two piece large wooden handled Auger or steel drill bit with the insignia 'Hardypick, Sheffield, England' stamped on the top of the drill bit. It was used in the 19th century to drill holes in especially large wood.'Hardypick, Sheffield, England'steel, wood, woodworking tools, carpentry tools, auger bits, augers, cutting tools

The Alma Doepel Youth Sail Training program was made available to Junior Legatees between 1988-1999 and may be again when restoration of the ship is completed. The plaque acknowledges the support of Melbourne Legacy during the earlier restoration after the war following the ship's war service carrying supplies and troops in New Guinea. There was a program to send young legatees on trips on the Alma Doepel through the 1980s and 90s. The articles from the Answer show timetables and criteria for nomination of junior legatees to be selected on the trips. One of these articles mentions the war service of the Alma Doepel - the only ship with served in World War II that was still active in 1995.Illustrates another of the activities engaged in by Junior Legatees. A record of a Legacy providing amazing experiences for the junior legatees that they might never have done because of the deaths of their fathers.Brown wood base, lacqured, green felt adhered to base, metal engraving attached to base. Title printed on white paper,adhered to black wooden triangle, brown felt adhered to base of triangle.Engraving of sailing ship "Alma Doepel". Inscription underneath the sailing ship as follows; ALMA DOEPEL Fore and Aft topsail schooner built in Bellingen, NSW, by Frederik Doepel and named after his daughter. Length 118 feet, Beam 26 feet. Underneath the engraving of the Alma Doepel is the inscription 'Presented To, Legacy, In Appreciation, Of Their Support, - 1982 -' Attached to green felt, white adhesive sticker, C2-2 printed in blue biro. Black wooden triangle "ALMA DOEPEL" Presented by Governor's Sail & Adventure Ltd. 1982 junior legatee outing, answer, alma doepel

Presented by the Victorian Tramway Football Association to Mr Norman Charles Boucher, Victorian Railways, Tramway Motorman for his long service to the Association. Dated 18 March 1947. Hand made with ink and water colours, with VFTA logo. Signed by C A Peterson as President, L Montgomery as Hon. Treasurer and R Hodder as Secretary. See item 7056i3.pdf for his story prepared by Noelle Jones. See item 7057 for a football team photograph which included Mr Boucher.Demonstrates a hand made illustrated Life Membership certificate.Wooden framed illustrated certificate glazed secured with nails on rear. Hand made with ink and colour wash. Has two screws in the top corners and a section of string for hanging. The wood frame is machined carved.sports, vfta, football, certificates, vr trams, motormen, n c boucher

Framed black and white photograph of A.N.A. Social held in 1908. The frame is dark brown wood with gold line outlining photo. Group photo taken in the Clunes Town Hall with A.N.A. banners in the backgrounda.n.a., 1908

Object has two parts - Part (1) A Spalding Pancho Gonzales-endorsed 'Prize Cup' wood tennis racquet. String whipping reinforcements around shoulders and around shaft. Endorser's signature, lion symbol & model name printed across throat on obverse and reverse. Manufacturer's name and logo printed along shaft on both sides of racquet. Grip wrapped with perforated leather. Large Spalding 'S" logo printed onto butt cap. Unreadable writing in marker on butt cap. Part (2) Spalding racquet press, wood with steel bolts and springs in each corner for tightening press. Manufacturer name printed across base on obverse. Top piece on obverse painted black. Materials: Wood, Metal, Lacquer, Glue, Ink, Nylon, Paint, Plastic, Stringtennis

FALLS of HALLADALE - History The Falls of Halladale was a four-masted sailing ship built-in 1886 in Glasgow, Scotland, for the long-distance cargo trade and was mostly used for Pacific grain trade. She had a sturdy construction, built to carry maximum cargo and maintain full sail in heavy gales. She was one of the last of the ‘windjammers’ that sailed the Trade Route and one of the first vessels to include fore and aft lifting bridges, which kept the crew safe and dry in as they moved around the decks in stormy conditions. She was owned by Wright, Breakenridge & Co of Glasgow and was one of several Falls Line ships, all of which were named after waterfalls in Scotland. On 4th August 1908, with new sails, 29 crew, and 2800 tons of cargo, the Falls of Halladale left New York, bound for Melbourne and Sydney via the Cape of Good Hope. The cargo on board was valued at £35,000 and included 56,763 tiles of American slate roofing tiles, 5,673 coils of barbed wire, 600 stoves, 500 sewing machines, 6,500 gallons of oil, 14,400 gallons of benzene, plumbing iron, 117 cases of crockery and glassware and many other manufactured items. The Falls of Halladale had been at sail for 102 days when, at 3 am on the of 14th November 1908, under full sail in calm seas with a six knots breeze behind and misleading fog along the coast, the great vessel rose upon an ocean swell and settled on top of a submerged reef near Peterborough on south-west Victoria’s coast. The ship was jammed on the rocks and began filling with water. The crew launched the two lifeboats and all 29 crew landed safely on the beach over 4 miles away at the Bay of Islands. The postmistress at Peterborough, who kept a watch for vessels in distress, saw the stranding and sent out an alert to the local people. A rescue party went to the aid of the sailors and the Port Campbell rocket crew was dispatched, but the crew had all managed to reach shore safely by the time help arrived. The ship stayed in full sail on the rocky shelf for nearly two months, attracting hundreds of sightseers who watched her slowly disintegrate until the pounding seas and dynamiting by salvagers finally broke her back, and her remains disappeared back into deeper water. The valuable cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. Further salvage operations were made from 1974-1986, during which time 22,000 slate tiles were recovered with the help of 14 oil drums to float them, plus personal artefacts, ship fittings, reams of paper and other items (a list of items held at Flagstaff Hill Maritime Village is included below). The Court of Marine Inquiry in Melbourne ruled that the foundering of the ship was entirely due to Captain David Wood Thomson’s navigational error, not to technical failure of the Clyde-built ship. The shipwreck is a popular site for divers, about 300m offshore and in 3 – 15m of water. Some of the original cargo can be seen at the site, including pieces of roof slate and coils of barbed wire.The Falls of Halladale shipwreck is listed on the Victorian Heritage Register (No. S255). She was one of the last ships to sail the Trade Routes. She is one of the first vessels to have fore and aft lifting bridges. She is an example of the remains of an International Cargo Ship and also represents aspects of Victoria’s shipping industry. The wreck is protected as a Historic Shipwreck under the Commonwealth Historic Shipwrecks Act (1976).Watercolour painting behind glass, framed in the Art Deco style - stippled cream painted wood. There are some age marks under the glass. The painting depicts the Falls of Halladale with its stern under water. The back of the painting contains facts about the shipwreck handwritten in a similar style to the artist’s signature. The artist’s signature is not clear enough to identify. Inscription on the back: Pasted on typed text: Peterborough Handwriting: Falls of Halladale 2085 tons 4 masted iron barque wrecked Saturday November 14th 1908 Captain Thomson crew of 28 !st mate F Pearson 2nd mate T Griffinflagstaff hill, warrnambool, flagstaff hill maritime museum & village, maritime museum, maritime village, shipwreck coast, 1908 shipwreck, falls of halladale, peterborough, peterborough shipwreck, great ocean road, captain thomson, 1880s sailing ship, cargo vessel, 1st mate f pearson, 2nd mate t griffin, watercolour painting

Album contains 11 leaves with horse-and-pony-club-related news items including several loose clippings with hand-written names throughout. Compiled by Lilas Scale, member of the Eltham Pony Club, covering 1972-1977 general information about Pony Club events with some Eltham people. Names noted are Denis Heather, Bill Barrow, Sue Wood, Neil Clinton, Dianne Bennett, Denise Cornall, Sue Pike, Sue Scale, Kirsten Wood, Simon Brau, Sarah Bray, Janine Simpson, Maryka Biesbroek, Fiona Rogers, Mathew Ellis.Magnetic Photo Album with red covers containing 11 leaves with clippings from horsy magazinesbill barrow, denis heather, denise cornall, dianne bennett, eltham horse and pony club, eltham pony club, fiona rogers, janine simpson, kirsten wood, lilas scale, maryka biesbroek, mathew ellis, neil clinton, sarah bray, simon brau, sue pike, sue scale, sue wood

The mortar is a bowl, typically made of hard wood, ceramic or stone. The pestle is a heavy club-shaped object, the end of which is used for crushing and grinding. The substance to be ground is placed in the mortar and ground, crushed or mixed with the pestle. The mortar and pestle is usually utilised when cooking and when crushing ingredients for a certain drug in pharmacies. For pharmaceutical use, the mortar and the head of the pestle are usually made of porcelain, while the handle of the pestle is made of wood. This is known as a Wedgwood mortar and pestle and originated in 1779Glass mortars and pestles are fragile, but stain-resistant and suitable for use with liquids. However, they do not grind as finely as the ceramic type The mortar is a thick clear glass bowl and the pestle is a solid clear glass club-shaped tool used by pharmacists for crushing tablets to a finer powder or mixing liquids pharmacy, mortar & pestle, medications, medicines, glass manufacturing, glass works, early settlers, moorabbin, bentleigh, cheltenham

This is size one of three sizes (Mrs Potts) irons available in the late 1800s and early 1900s which were used for (press) ironing clothes etc. using wood or coal based heaters. The majority of these irons would have been placed on top of wood or coal fuelled stoves. They survived longer in isolated outback regions where electricity had not been connected. The weight of these irons was intentionally heavy so as to press the clothes etc. neatly. These irons were used in an era where stiff collars and creases in particular types of clothing was essentially a social requirementHistorically these irons fulfilled a particular function that was the norm in isolated or semi isolated country locations. Cities and larger towns had professional laundry and pressing shops. In smaller towns and homesteads, wives and relatives would use these heavy irons and required strong arms. In middle and higher levels of society these irons would be used by maids or nannies. Their use was a necessity to conform to the social requirements of acceptable appearances that all clothing worn had been "pressed" clean. In the Kiewa Valley the majority of these irons would have been used by mothers or relatives. Men would hardly have used these irons as society labelled this type of activity as "women's work"This double pointed, heavy and solid cast iron, is a Mrs Potts No. 1 type. It does not have a handle. It was used to iron clothes. Open cavity on top for handle (not included) see KVHS 0369 for No. 3 ironMrs Potts No. 1house hold, ironing, domestic, pressing, clothes appliance

This is size one of three sizes (Mrs Potts) irons available in the late 1800s and early 1900s which were used for (press) ironing clothes etc. using wood or coal based heaters. The majority of these irons would have been placed on top of wood or coal fuelled stoves. They survived longer in isolated outback regions where electricity had not been connected. The weight of these irons was intentionally heavy so as to press the clothes etc. neatly. These irons were used in an era where stiff collars and creases in particular types of clothing was essentially a social requirementHistorically these irons fulfilled a particular function that was the norm in isolated or semi isolated country locations i.e., ironed clothes and linen.The iron was heated by using locally acquired wood in a cast iron stove or "pot Belly". It would be placed on top of the stove but not directly in the flames. Cities and larger towns had professional laundry and pressing shops. In smaller towns and homesteads, wives and relatives would use these heavy irons which required strong arms. In middle and higher levels of society these irons would be used by maids or nannies. Their use was a necessity, to conform to the social requirements of acceptable appearances in that all clothing worn had been "pressed" clean. In the Kiewa Valley the majority of these irons would have been used by mothers or relatives. Men would hardly have used these irons as society labelled this type of activity as "women's work"This double pointed, heavy and solid cast iron, is a Mrs Potts No.3 type. It does not have a handle. It was used to iron clothes. Open cavity on top for handle (not included) Note: one end is pointed up to allow the natural weight of the iron to increase the pressure at any of the "hard to press" spots or emphasizing required creases. see KVHS 0368 for No. 1 ironMrs Potts No. 3house hold, ironing, domestic, pressing, clothes appliance

These badges were almost certainly issued to Leslie Samuel Woods of Albury who enlisted 10 May 1915 having completed first year medicine at Melbourne University. He served a year at the Convalescent Hospital, Harefield UK, before being ordered home to complete his medical studies. He would have completed his studies near the end on 1918 and attempted to re-enlist but had not entered training before the Armistice. Doctor Leslie Woods was a General Practitioner in Albury till his death. He is buried in Albury Waugh Road Cemetery.Well provenanced object illustrating the WWI experience of a young Albury man.Two lapel badges pinned to a piece of paper with a handwritten notation. One is a Demobilised Soldiers badge issued to new recruits training in Australia at the time of the Armistice on 11 November 1918 or those who had enlisted but had not yet been called into camp for training, and the other a Volunteer Home Service Badge issued to employees of the Department of Defence who had volunteered for active service abroad but who had been denied due to their services being required in Australia. ."14-18 War / 'required for Home Service' / to complete medical course. Pulled / out of camp by Gen Fetherson / DGMS"military, wwi, world war one, woods, enlist, enlistment, non-enlistment

Two colour slides of a steering wheel, dashboard and speedometer. One shows 65 miles per hour and the second 70 miles per hour. It was during Operation Firewood. Legatees would organise collection of wood from the country and distribute it to widows in metropolitan Melbourne. Other slides show the cutting and loading of wood and delivery to widows in metropolitan Melbourne. Was with many other slides taken in the 1950s and 1960s. The slides have been photographed to make digital images and moved to archive quality sleeves. In many cases the original images were not well focussed and the digital image the best available.A record of Legacy helping widows by sourcing, supplying and delivering firewood. When open fires were the main source of heating, a load of firewood and help moving it, would have been very important to the widows.Colour slide x 2 of the steering wheel and speedometer during Operation Firewood in brown Anscochrome cardboard mount.Printed on front in red ink 'Anscochrome / View from this side / Made in Australia'. Hand written on front of one '65MPH Warming up' and on the other '70MPH just cruising' in blue pen. Printed on reverse in red ink 'Processed by Verycolor photo labs. Melbourne, Victoria'.operation firewood, cars

The downright shave is a tool used by coopers in the preliminary stages of smoothing the outside of a cask, before it is finished with a buzz shave. The shave is pushed downwards, hence its name, away from the operator to take away the wood shavings. A significant tool used by a cooper in the production of making wooden barrels a design that has not changed much in many hundreds of years of barrel making.Coopers Downright/Pluckers PlaneNoneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, coopers tools, coopers plane, barrel making, carpenters tools, smoothing plane

Cherry Tree Road Job 56F443 Contractors Wolf and Wood Culverts in place, 3 rows 73” diameter 45-degree skew Looking towards Panton Hill – before trimming ends of pipe March 1960Record of various Shire of Eltham infrastructure works undertaken during the period of 1952-1962 involving bridge and road reconstruction projects, sometimes with Eltham Shire Council Project Reference numbers quoted. It was during this period that a number of significant improvements were made to roads and new bridges constructed within the shire that remain in place as of present day (2022). In many situations, the photos provide a tangible visible record of infrastructure that existed throughout the early days of the Shire. The album was put together by or under the direction of the Shire Engineer, J.A. McDonald.infrastructure, 1960-03, bridge construction, cherry tree road, heidelberg-kinglake road, road construction, shire of eltham

Red cloth large hardcover book. Title is written on the front cover and on spine in gold. Small gold circle pattern on front cover. The book contains 100 coloured plates, 32 b/w plates with images of peasant handicraft. The book includes table of content, index, bibliography and a library due date card inside back cover, it was borrowed by Donald Ferguson(an art lecturer)on 13 May 1957. Page numbers written in roman numerals. embroidery, europe, ceramics, ornaments, peasant art, h th bossert, folk art, embroideries, handicraft, decorative arts, textile fabrics

Cuisenaire Rods are pieces of wood/plastic, 1 square cm in cross-section, made in 10 different lengths, each having a charactersitic colour. Invented by a Belgian teacher, Georges Cuisenaire, as a tool to assist in the teaching of mathematics.A plastic box with a clear lid containing 10 different coloured plastic Cuisenaire Rods: Orange, blue, brown, black, dark green, yellow, pink, light green, red, white. Taped to the box is a leaflet titles 'Cuisenaire Rods: A Brief History'. The following rods are: 6 x orange 6 x blue 6 x brown 6 x black 8 x dark green 16 x yellow 12 x pink 18 x light green 24 x red 24 x red 42 whiteeducation, maths, cuisenaire, rods, teaching tool, mathematics education

Cuisenaire Rods are pieces of wood/plastic, 1 square cm in cross-section, made in 10 different lengths, each having a charactersitic colour. Invented by a Belgian teacher, Georges Cuisenaire, as a tool to assist in the teaching of mathematics.A selection of timber Cuisenaire rods in a blue plastic container with clear lid. education, maths, cuisenaire, rods

A cast of the Legacy torch mounted on wood. The badge of Legacy is the Torch and Wreath of Laurel. The Torch signifies the undying flame of service and sacrifice of those who gave their lives for their country. The Wreath of Laurel is the symbol of our remembrance of them. An example of the Legacy torch being cast and mounted for use in events and meetings.Cast metal torch and wreath, mounted on a timber triangular mount. Torch and wreath colour gold. Triangular timber stand, one side stained brown, base and third side painted brown. Wreath and torch attached to stained timber side by a single screw.torch, logos

A froe was used for splitting, or riving, wood in the early days and was a skill practiced by craftsmen who made boards, shingles, c lapboards, fences, basket splints, chair parts, wagon spokes, lath, and more. Our ancestors used axes, gluts or wedges, froes, draw knives and spelk planes for splitting wood.   The froe was designed in many sizes and designs for splitting timber. It is typically an L-shaped tool made up of a wedge-shaped blade with a dull, but not blunt, knife edge and a wood handle. Blades were usually straight with a socket forged at one end for a handle, but curved blades were also made. Most handles were round and tapered and were inserted up through this socket. But some froes had eyes similar to those on axes for handles that were wedged. The froe handle is held in an upright position in one hand while the other hand drives the top of the blade downward with a wood froe club or mallet. After a split is started, the froe is wiggled downward to lengthen it until the split is complete. Most old froes were hand forged, but they were also available in many catalogues. The 1873 D.R. Barton American catalogue offered straight froes at 12 1/2 cents per inch. You can still buy new froes from many tool manufacturers today.A tool that has not changed in design or use since its inception several hundred years ago to split timber for various uses.Froe, also called cooper's froe or stave froe, without handle.Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, froe, cooper's froe, stave froe, wood splitter, carpenders tools, coopers tool, splitting timber

Greg CROWE (1953- ) Born England, arrived Australia 1963 Greg Crowe's intial training was in architecture. In 1980 Greg Crowe established the Hovea Pottery in the hills east of Perth and am constantly firing up new work there 30 years on.In 2008 Greg Crowe undertook a McKnight Residency for Ceramic Artists at the Northern Clay Center, Minnesota, U.S.A., and has demonstrated and exhibited elsewhere in the U.S.A. and Canada, Japan, France, Denmark, Ireland and Singapore. In 1985 he built a wood-fired salt kiln at Hovea with Fergus Stewart, and has specialised in wood-firing and salt-glazing since then, In 1992 he worked with wood firer Sven Bayer in Devon, UK. In 1996-1998 he built an anagama kiln in the south-west of Western Australia. y Texture and the unique, plastic responsive nature of claygre to stretching has been of great interest to Greg Crowe. Greg Crow signs his work with an impressed 'GC'. Thrown bulbous woodfired pot.greg crowe, ceramics, gippsland campus, jan feder memorial ceramics collection, hovea pottery, woodfire 86

An aerial photo of the Somme in France during World War One. There are coordinates or numbers in some areas. Also labelled are the Johannes and Anvil Wood. Was with 11 other photos of World War One that had been mounted on board for display at Legacy House at some stage. When they were taken off display they were put in the archive cabinets. The founding legatees all served in World War One so these photos would have been of significant places for them. (see 01888 to 01899). From the AWM: Anvil Wood was a small wood to the north of Peronne that marked the centreline of an attack by the 14th Brigade on the morning of 1 September 1918. The northern approaches to Peronne were covered by numerous field and machine-guns, but the leading battalions of the brigade - the 53rd and 54th - pushed their attack home with determination, and sent the German defenders fleeing back to Peronne. The attack opened the way for the 14th Brigade to advance on to Peronne itself and break into the town's northern defences.Photos from World War One that would have been significant to the founding legatees.Sepia photo of the Somme battlefield in France during World War One.world war one, france, somme

An early colour tinted photograph of the Upper Cumberland Falls near Cambarville in Victoria. This postcard was published by Victorian Stamp Market as a souvenir of Marysville. An early colour tinted photograph of the Upper Cumberland Falls near Cambarville in Victoria. These falls are located on the Marysville-Wood's Point Road. Cambarville is notable for its giant mountain ash (Eucalyptus regnans) trees within the Cumberland Memorial Scenic Reserve, and relics from former sawmills and gold mining. The Big Culvert is located nearby on the Marysville - Woods Point Road, which was historically part of the Yarra Track. Cambarville was established as a timber mill town in the 1940s. Timber mill owners A Cameron and FJ Barton named Cambarville. They established the mill to salvage timber from trees destroyed in the 1939 bushfires. Cambarville was impacted by the 2009 Black Saturday bushfires and any remaining structures were destroyed.POST CARD This space may be used for Correspondence. FOR ADDRESS ONLY Printed in Germany V.S.M. Series WOOD / VICT/ A/ 10 -4.S.10-3/ DISTRIBUZIONS JWO Gricardi/ Via Galletti/ V 16/ Loruis/ Italy Mary A????/ Australiacumberland falls, cambarville, marysville, victoria, waterfalls, postcard, souvenir, mountain ash, mining, timber mills, big culvert, yarra track, a cameron, fj barton, black saturday bushfires, 1939 bushfires, eucalyptus regnans, victorian stamp market, victorian stamp market series

Reproduction unglazed ceramic bust.Engraved on back: "The Rev John Wesley M.A. Fellow of Lincoln College Oxford and founder of Methodism. He sat for this bust to Mr Enoch Wood, Sculptor Burslem 1781 and died in 1791 aged 88 years". "Is not this a brand plucked out of the fire".john wesley, methodism, lincoln college oxford

This CD relates the story of the quest to discover the Mahogany ship wreck which purportedly lies to the west of Warrnambool and is believed to be either a Spanish or Portuguese ship. It is named the mahogany ship due to the dark colour of the wood seen by early settlers.The story of the Mahogany ship is an integral part of Warrnambool's maritime historyThis a DVD with a plain white face with brown printing on it. ‘Quest For the Mahogany Ship, Rob Simpson’mahogany ship, warrnambool history, warrnambool shipwrecks

Chandler was always going on nature walks. If he had time off, he would go off and walk into a wood or go and look for bird's nests or chasing butterflies and insects or whatever because he was interested in the whole of nature. nature walk, aif, a.i.f, ww1, world war 1, colour

Approval received from the Forests Commission of Victoria to purchase two tons of firewood for use at Holmbush at 1267 Burke Road. It shows that wood was a rationed resource during the war and approval was required from the Forest Commission before acquisition. A record that purchase of firewood required approval in 1943.Letter on Forest Commission Victoria letterhead about acquiring firewood, white paper with black type, two hole punched.Signed illegible for Secretary of Forests Commission of Victoriaholmbush administration, holmbush