These boots had a metal plate inserted in sole to protect the feet of personnel wearing boot. This was after earlier boots without this protection did not protect the wearer from sharpened spikes eg bamboo set in pits or “punji” pits, during the Vietnam war. The laces were done up by knotting one end,threading from bottom hole across to opposite hole,up next hole on same side,across to opposite hole etc. This meant that only one loop per opposite holes was all exposed for a quick and easy cutting to release the boot in case of injury to wearer.These boots were typically worn on parade,training and in combat during the Vietnam war era and after.The LEFT boot solid black leather uppers with split leather tongue sewn to sides - making the boot semi water and insect proof.The sole is hard black rubber compound with 7 cleats on sole and 3 cleats on heel,all part of rubber sole. Woven black cotton laces. 30 mm leather reinforcing strip sewn on inside top of boot. 11 by 5mm metal holes per boot for laces. Sole is welded on. “Dunlop made in Australia” and “5/5” on sole in front of heel. Inscribed on top reinforced inside leather band is- “ B 22 R.B.T 1439 188” on one side and “ 5/6” on the other.boots, general purpose, g.p., vietnam war

These boots had a metal plate inserted in sole to protect the feet of personnel wearing boot. This was after earlier boots without this protection did not protect the wearer from sharpened spikes eg bamboo set in pits or “punji” pits, during the Vietnam war. The laces were done up by knotting one end,threading from bottom hole across to opposite hole,up next hole on same side,across to opposite hole etc. This meant that only one loop per opposite holes was all exposed for a quick and easy cutting to release the boot in case of injury to wearer.These boots were typically worn on parade,training and in combat during the Vietnam war era and after.The RIGHT boot solid black leather uppers with split leather tongue sewn to sides - making the boot semi water and insect proof.The sole is hard black rubber compound with 7 cleats on sole and 3 cleats on heel,all part of rubber sole. Woven black cotton laces. 30 mm leather reinforcing strip sewn on inside top of boot. 11 by 5mm metal holes per boot for laces. Sole is welded on. “Dunlop made in Australia” and “5/5” on sole in front of heel. Inscribed on top reinforced inside leather band is- “ B 22 R.B.T 1439 188” on one side and “ 5/6” on the other.boots, general purpose, g.p., vietnam war

Coins are one of the worlds oldest types of currency, though the worlds first coins were very basic . They first began to appear in the ancient world and by the time of the Roman and Greek civilisations, coins were being issued in a range of denominations with quite sophisticated designs. With coins being used instead of older systems such as barter, people needed a way to carry and store their money and the coin holder appeared on the scene. Sovereign cases were small portable boxes usually in cylindrical shape and made from various metals with snap shut covers to contain the coin. This one is kept safe by being attached to a fob chain. The silver sovereign holder was used for carrying either full or half gold sovereigns. It had the shape of a locket or of a watch and was often worn on a chain and kept by gentlemen in a waist coat pocket. This item is an example of a commonly used sovereign case.A small round metal ( nickel plated?) sovereign coin holder. it has a spring opening with a slot for insertion of coin, It has a link attached to top.currency coin sovereign-case personal-effects

The badge was sewn to the hat band and worn at the front of the hat. Mrs N Trethewie, of Penguin, Tasmania, donated the badge to the school in July 2002. Silver coloured metal badge plate slightly concave, in the shape of the Clarendon Ladies College crest with motto and school name on scroll at base of crestEmbossed on scroll: SUIVEX LA VERITE / CLARENDON LADIES COLLEGEclarendon-ladies-college, hat, badge, trethewie

Post natal forceps, metal, chrome plated, with break hinge. Maker Smith & Sheppard with number 4 stamped on shaft. 2 handle piecesflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

The rusted metal machine part has an inscription discernible on an attached plate. It is part of the hydraulic system used in the East landing crane between 1971 and 1978.Meets second level threshold.Rusted metal machine part with plate with inscription.

This banknote plate was created for the Sydney branch of the Bank of Australasia in February 1900, before the Federation of Australia. After printing the banknotes from this plate the printer would have overprinted the banknotes with a unique serial number and the denomination of the banknote in capital letters using a contrasting ink. The Bank of Australasia was incorporated by Royal Charter of England in March 1834. It first came to Australia on 14th December 1835, opening in Sydney. In that year, the Acting Superintendent of the Bank of Australasia in Sydney was David Charters McArthur. He went on to become the Superintendent from 1867-to 1876. The Melbourne branch of the Bank of Australasia opened on 28th August 1838. In 1951 the Bank of Australasia amalgamated with the Union Bank to form the Australia and New Zealand Bank, now known as the ANZ. Then in 1970 the ANZ merged with both the ES&A and the London Bank of Australia to form the ANZ Banking Group Limited. The ANZ Banking Group Ltd kindly donated a variety of historic items from the Bank of Australasia. BANK of AUSTRALASIA, WARRNAMBOOL – The Bank of Australasia was the first bank in Warrnambool. It was established in 1854 and operated from leased buildings on Merri Street and then Timor Street. The bank opened its own building on May 21, 1860, on the northeast corner of Timor and Kepler Streets. Mr A Butt was the Manager of the Warrnambool Branch in 1895. This significant item of early Australian social history gives a snapshot into the founding and early development of the banking system in Australia. The plate has historical significance as it belonged to the Bank of Australasia which was established in 1834 by Royal Charter and opened in Sydney, Australia, in Sydney in 1835. The plate is significant for its association with the Bank of Australasia, which had a branch in Warrnambool. Warrnambool's branch was the first bank in Warrnambool, established in 1854. The bank continued to operate until its merger in 1951 when it became the ANZ Bank, which is still in operation today. The Bank was an integral part of the establishment and growth of commerce in Colonial Warrnambool and throughout Australia.Printer's plate for a five-pound note, attached to a block comprising several layers of different varieties of wood. Rectangular metal plate embossed with the banknote's design and produced by the Sydney, New South Wales, branch of the Bank of Australasia. The border includes numbers and text. The image of the bank's logo is included, along with the banknote's denomination in letters and numerals, a signature and a date of 15th February 1900.On the border: in each corner "5", on sides and base "NEW SOUTH WALES" Within the border "FIVE" "The Bank of Australasia / INCORPORATED BY ROYAL CHARTER IN 1835" "FIVE POUNDS' "SYDNEY 5th of February 1900" "for the Bank of Australasia" (Signature) , "MANAGER" Image: (Bank's logo) [Two female figures seated together in a paddock, produce beside them, sheep and buildings in the background]flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, bank of australasia, union bank, australia & new zealand bank, anz bank, sydney, new south wales, currency, banknote, legal tender, commerce, banking, five-pound note, banknote plate, printing plate

Brown wooden 2006 Hume North East Region Sports Award plaques with gold metal plate on the bottom section and 3D Year Champion sticker in the centre. Team awards: Year 7 female squash Year 11 & 12 Cross country U21 relay athletics Year 11 & 12 Squash Individual Awards: Jayson Shaw- Baseball Outstanding Achievement

Brown wooden 2008 Hume North East Region Sports Award plaques with gold metal plate on the bottom section and 3D Year Champion sticker in the centre. Team awards: Year 9 & 10 girls cross country Skiing Year 9 & 10 girls soccer Year 9 & 10 girls squash Year 11 & 12 girls netball

Brown wooden 2009 Hume North East Region Sports Award plaques with gold metal plate on the bottom section and 3D Year Champion sticker in the centre. Team awards: Year 8 girls Netball Year 7-11 mixed Cross country snow Skiing Year 11 & 12 girls Squash Year 11 & 12 girls Badminton

The Blair-Bell medal was awarded quinquennially for the advancement of science in gynaecology or obstetrics or both in the preceding five years. The image on this block was used in an article, "The Blair-Bell Award" in the Australian & New Zealand Journal O + G [1961]1:77 featuring Prof. F.J. Browne, winner of the Blair-Bell Medal, 28/10/60. Also used in obituary of Professor Browne.Metal printer's plate attached to a wooden block. Depicts the official recto medal image of the Blair-Bell medal, featuring a portrait of William Blair-Bell. blair-bell award, browne fj, printing

The Rev Charles Kingston Daws was president (1957) of the Victoria and Tasmania Conference, and president-general (1969-72) of the Methodist Church of Australasia. Two metal printing plates in a buff "Spectator Publishing" envelope which has ink handwriting on the front. G138.1 and G138.2 printing plates. G138.3 envelope.On envelope: "C. K. Daws Original Block Church Crest Do not use Hold for making Electros or Sterios"rev c k daws, methodist church of australasia, methodist minister, president of conference

Hand brace - 'U' shaped with split end to take a tapered end drill. Drill is secured by a bolt to tighten split end. Metal breast plate.trades, carpentry, tools

Nickel plated metal shoe horn, The Co-operative Boot Store Bendigo & Eaglehawk.Made in USAcostume accessories, footwear accessories, shoe horn

This machine was made in Baden, Germany, for the Ward Brothers of Melbourne, who imported machines from various manufacturers and had them branded with their Ward Brothers decals. This machine is most likely dated after 1911, when the Ward Brothers became two separate businesses, as there are only remnants of two portrait decals on the machine bed. There is a fitted embedded ruler in the wood of the base. Many sewing machine manufacturers in Germany produced their machines specifically for export. A company could mass-produce its machines and give the same product several different brand names, according to their overseas buyers. There was a huge market for domestic machines as it enabled tailored clothing to be made in households at a fraction of the retail prices. Ward Brothers began in Australia in the late 1890s and early sewing machines sold by them had the three brothers on their decals. In 1911 the brothers divided into two separate firms, one operating on his own, the other two remaining together, and all still operating in Melbourne and at first still using the name Ward Brothers.This sewing machine is one of two hand-operated Ward Brothers machines in our collection that were made in Baden, Germany, and the only one that has the two Ward Brothers on its decal and that has side to side slide plates. This machine represents the early domestic market for sewing machines, making it possible for the everyday homemaker to produce fashionable garments and linen ware that was affordable. The owner of this machine could work at more than one location as it was portable and did not require a large space to set up. The machine is associated with the well-known Ward Brothers of Melbourne, who sold imported sewing machines that were branded with their own name.Sewing machine with case. The black-painted metal machine is hand-operated and the crank handle is wooden. The machine is on a wooden base and has a box included that contains many machine accessories. Made in Baden, Gemnamy, for Ward Brothers of Melbourne. There is an attached metal plate on the front with rows of groups of numbers on it. The wooden bed has an embedded ruler. The machine had decals with geometric designs and the maker's name.Printed in script: "Specially made in Baden / by Ward Broth Melbourne"flagstaff hill, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, sewing machine, hand operated, domestic sewing, homemade clothing, fashion, ward brothers, made in germany, baden, front and rear slide plates, post wwi, post 1911

Thomas Alan Broadbent, a student prior to enlisting had served 4 years in Snr Cadets. He enlisted in the AIF aged 18 years 5 months under a special condition from his parents that he not embark for overseas until he turned 19 years. Enlisted No 15887 in 10 reinforcements 46th Batt AIF on 7.5.17. Embarked for England 28.2.18, hospital 18.6.18 with Bronchitis, hospital 1.8.18 with Influenza, embarked for France 22.8.18, KIA by high explosive shell on the advance towards Bellicourt on 20.9.18. Refer 2567P, 2568.2..1) Medals, court mounted, set of (2) re T.A Broadbent. 1. War Medal 1914-19. 2. Victory Medal. .2) Badge "Mothers & Widows Ribbon" re T.A Broadbent. Metal and fabric, centre fabric has the Rising Sun in colour, metal plate top and bottom, bottom plate has one Star depicting one person lost in the War..1) "15887 Pte T.A Broadbent 46 BN A.I.F" .2) "32774"medals, badges, military

A hand plane is a tool for shaping wood Hand planes are generally the combination of a cutting edge, such as a sharpened metal plate, attached to a firm body, that when moved over a wood surface, take up relatively uniform shavings, by nature of the body riding on the 'high spots' in the wood, and also by providing a relatively constant angle to the cutting edge, render the planed surface very smooth. A cutter which extends below the bottom surface, or sole, of the plane slices off shavings of wood. A large, flat sole on a plane guides the cutter to remove only the highest parts of an imperfect surface, until, after several passes, the surface is flat and smooth.The family of Mr Lamb were early settlers in Moorabbin Shire and had to be self reliant and made their own clothes and tools as they established homes and farms for their families.c1880 A hand made wood planeearly settlers, pioneers, market gardeners, moorabbin, bentleigh, brighton, cheltenham, tools

Metal printing plate used by the Bendigo Butter Factory. 11.3cm x 5cm. The words on the plate - Buy Bendigo Butter It's Best! Produced in Bendigo, with a logo.bendigo, industry, bendigo butter factory.

Taken from a Japanese heavy machine gun after surrender at Lawas, British North Borneo. September, 1945Black Metal machine gunsight with spirit level and 2 X focusing wheels and sight and monocular. Metal base plate has 5 holes to secure to a benchLetters in metal: 27994 4 x 10 degrees To ? Jes 4? 154 on reverse No. 38458gunsight, gun, japan, dickinson, b, tatura, borneo, arms, firearms

Collingwood Technical School which opened on 15 July 1912, changed its name to Collingwood Technical College (CTC) in 1970. This stencil is of the CTC logo. It is made from thin sheets of metal, possibly tin-plated, with the design cut into the metal so that the design can be reproduced when colour is rubbed through it. The logo appears in school publications including school magazines from 1971 to 1980 (see descriptive article about the logo in Turawan 1971). Over the same period of time the logo was also used on emblems for School blazers, Cadet uniforms and on school standards and banners.This item is historically significant as a record and example of the change of name of the Collingwood Technical School to Collingwood Technical College in 1970, and it links to the description of the logo in the school magazine 1971.Metal (possibly tin plated) stencil, of Collingwood Technical College (CTC) logo, consisting of 2 parts. One: Outer circle with gear cog shaped outer edge. Two: Diamond shaped centrepiece with a square, an artist's palette and a pair of calipers enclosing the College monogram CTC.collingwood technical college, stencils, nmit,

Model of the ship served on by W Thomson during WWII.Scale model of the HMAS Maryborough that was operated by the Australian Navy during WWII.Grey and black painted plastic and wood scale model of the Bathurst class HMAS Maryborough (1940 to 1946) minesweeper (commonly known as corvettes) mounted in a wooden frame glass sided and top case. It has cotton rigging with metal anchor chains. An inscribed metal plate is located on the front glass side. The upper of the model is painted grey, and the bottom black. J195 is painted in black lettering on the bow of the model.J195 H.M.A.S Maryborough 1940 - 1946 Made by W. Thomsonmodel, hmas maryborough, bathurst class, minesweeper, corvette

Plaque with metal circular plate sitting on wooden square block with rounded edges. Plate features an image of the Port of Busan. On reverse is pocket where a metal stand sits. "In Commemoration of Your Visit/ Busan Container Terminal Operation Corporation/ President Huh, Taek" On reverse "PMA 0149/1" "Presented to Chairman, PMA/ John B King/ By Busan Container Terminal/ Operation Corporation/ On Occasion of his visit to/ Pusan, Sth Koread/ 22-25 October 1991 (Plaque)"

Francis Powell (1861-) and Francis Hanmer (1858-1925) founded Powell and Hanmer Ltd in the Summer of 1885 for the manufacturer of bike and carriage lamps. Their first advertisements began to appear in November of 1885. In 1890 they lodged a Patent for “velocipede” lamps to be used by lightweight wheeled vehicles propelled by a rider, such as a bike, tricycle and railroad handcar. In April of 1913, they were selling headlamps for cars and in 1914 built their second factory manufacturing dynamo lighting sets in Rocky Lane Birmingham, also for the production of dynamos for motor cars. Then in 1929 Powell and Hanmer Ltd, was acquired by the Lucas company which was at that time the main competitor for the manufacture of non-electrical equipment for cycles and motorcycles. When a director of Powell and Hanmer joined the board of Austin motor cars, Lucas feared that Austins might encourage Powell and Hanmer to start to produce electrical equipment for supply to the company and as a result this association might affect Lucas's business with other large vehicle manufacturers. As a result, Lucas made an offer to Powell & Hanmer and purchased the business for £500,000. Carbide lighting was used in rural and urban areas of Australia which were not served by electrification. Its use began shortly after 1900 in many countries and continued past the 1950s. Calcium carbide pellets were placed in a container outside the home, with water piped to the container and allowed to drip on the pellets releasing acetylene. This gas was piped to lighting fixtures inside the house, where it was burned, creating a very bright flame. Carbide lighting was inexpensive but was prone to gas leaks and explosions. Early models of the automobile, motorbike and bicycles used carbide lamps as headlamps. Acetylene gas, derived from carbide, enabled early automobiles to drive safely at night. Thick concave mirrors combined with magnifying lenses projected the acetylene flame light. These type of lights were used until reliable batteries and dynamos became available, and manufacturers switched to electric lights. Acetylene lamps were also used on riverboats for night navigation. The National Museum of Australia has a lamp made in about 1910 that was used onboard the PS Enterprise, an 1878 Australian paddle steamer, currently owned by the National Museum of Australia in Canberra. It is still operational, and one of the oldest working paddle steamers in the world, listed on the Australian Register of Historic Vehicles.Acetylene Carbide lamp, marine pattern burner housing and reflector missing Carbide Lamp, metal. Has plate for attaching to wall, & gimbal to allow lamp to remain vertical. Noneflagstaff hill, warrnambool, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, carbide lamp, motor vehicle, bike lamp, lighting, vehicle lighting, powell, hanmer, acetylene gas lamp, early lighting, marine lighting

Probably used for picnics & knee rug whilst travellingWool rug - red and olive green 2cm square check 12 cm fringe folded within leather straps 2 metal clasps, plated silver handlepersonal effects, travel goods

An example of a Telephone Set D Mk V which was used by Australian forces during the Second World War for verbal and Morse code communications over short distances via a telephone line.An example of a Telephone Set D Mk V which was used by Australian forces during the Second World War for verbal and Morse code communications over short distances via a telephone line. Rectangular aluminum green painted box with broad canvas webbing strap secured to the side of the body through metal loops. Two vertical webbing loops are attached to the rear of the body. Stencilled in black on top TELE. SET. D. MK. V.'. The housing opens by a hinged fold back lid that is secured by a hook and eye closure. Attached to the inside of the lid are two metal plates. The first is a circuitry diagram, the second is the instructions for use of the set. The interior contains the phone assembly and is divided by a metal shelf. On the left is a bell with two screw terminal in front. At the center is the telegraph key and behind that is the battery box with a small metal plate with, 'TELEPHONE SET. D.MK.V To the right is metal box with two terminals in frontAttached to the bottom of the shelf is a slide out metal key Below the shelf is a compartment in which is stowed a black metal headset with provision for a bakelite handset with attached cord and four-prong plug.Tele Set stamped on outside of unit. Inside lid plaque - Telephone Set D MK V

The Archimedes drill, also known as a fretwork drill, is an old type of drill which works on the Archimedian principle; the drill rotates quickly as the barrel on the stem is worked up and down. This tool provides a quick and easy way to bore holes through ordinary fret wood and other substances, smaller versions are used in jewellery making where precision drilling is required. There were numerous different sized Archimedes drills made from various materials, usually a combination of wood and steel, some being all steel and some including brass parts. The fancier versions of these drills included parts made from Rosewood, Ebony, Ivory and decorative brass parts. Some of the later Archimedes drills had technological improvements such as a ratchet device and the inclusion of fly-weights. The ratchet device allows the drill to revolve continuously in the cutting direction. The fly-weights give momentum to maintain the speed of the drill during the upward stroke of the hand. Most old examples have no makers names.A vintage drilling tool that has been nickel plated with brass fitting and easier to sterilise. The item therefore could have been used in the medical profession as a bone drill during surgery. Weighted Archimedes drill all metal construction, nickel plated with brass handles centrifugal typeNoneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, archimedean drill, drill, tool, drilling tool

Silver plated metal pin tray, part of desk set, hinged lid with Japanese scene.domestic equipment, containers, desk set