Kedge anchoranchor, kedge anchor

Bass Strait passenger ship Nairana. Built for Bass Strait ferry operator Huddart Parker & Co. Ltd. of Melbourne during World War One, the Nairana was requisitioned by the Royal Navy and completed as a seaplane carrier, HMS Nairana. Serving from 1917 to 1920 participating in the capture of Archangel during the Bolshevik Revolution. After 1920 she was decommissioned as a seaplane carrier and returned to her Australian owners crossing Bass Strait until she was laid up in 1948. Just off Port Phillip Heads on April 12 1936, a strong wave struck the Nairana, tipping her over for two minutes before she righted herself again. During the horrifying two minutes, four people were drowned, and eight people were injured. The ship was reportedly carrying roughly one tonne of concrete in the hull when she tipped. Reports from the local papers said that it was a tidal wave meanwhile others were saying it was either an earthquake or a total lie. A later paper said that the ship had been caught in a rip at the mouth of the bay, causing the tragedy. The S.S Nairana, was sold for £4,000 (over $170,200 in today’s money!) in 1951 after two years of being stranded on the beach at Port Melbourne, when the moorings broke one night during a storm and drifted ashore, causing her to wreck.Items associated with the TSS/HMS Nairana in its military and civilian roles and items relating to Capt. JF Spence, navigation Officer and possibly later the captain who sailed with the Nairana out of Plymouth after WWI. .01 Barometer and Clock from Dining Saloon .02 Commemorative plaque describing the HMS Nairana's WWI service with timber mount for plaque with information sheet attached. .03 Clock Key .04 Two 2 Log books owned by Capt. Spence containing the navigation calculations for the journey from Plymouth to Melbourne. .05 Huddart Parker hat badge [Capt. JF Spence].Barometer and Clock from dining saloon, TSS Nairana 1917 - 1951 Clock Key - 4 50-No9 Hat badge - HPtss nairana, wwi, bass strait, huddart parker, capt. spence

Submission made on the 5 March 1982 to the Minister of Tourism The Honourable Graeme Weideman MP for Financial Support to Establish the Queenscliff Maritime Centre which later became the Queenscliffe Maritime Museum.The resulting funding from this submission enabled the construction and establishment of the Queenscliffe Maritime museumAn A4 Document containing a submission to the minister of Tourism.Submission to the Minister of Tourism The Honourable Graeme Weideman MP for Financial Support to Establish the Queenscliff Maritime Centrequeenscliffe maritime museum, funding

Outboard motor - single cylinder air cooled 2 stroke motor probably mower conversion

Modelled on a lifeboat 11.3m [37 feet] long stationed at Llandandru, Northern Wales from 1964 to 1990. Samuel Lloyd-Jones who was 2nd coxswain for 7 years built this model.Model of an Oakley Class Lifeboatlifeboats, model boats, samuel lloyd-jones, oakley class

Prior to 1901, sailing pilot cruising cutters were "Boomerang", "Corsair", "Anonyma", "Proserpine", "Rip", "Mavis" and "Hawk". In 1901 the pilots took delivery of their first steam powered pilot cutter, "Victoria", 46 metres in length, built at Williamstown. "Victoria" was followed by "Alvina", "Akuna", "Akuna II" and in 1953, "Wyuna", a twin-screw diesel electric pilot cutter 63 metres long. "Wyuna" served until November 1979 and was then sold to the new Nautical College at Launceston for use as a training ship. The system for getting pilots on and off ships at sea was for the ship to stop dead in the water with the wind and sea broad on the beam. The pilot cutter would round the ship's stern, manoeuvre into the lee and lower the 18ft. workboat which, with a crew of two, transferred the pilots to and from their ships.Chief Officer's Log Bok from SS Victoria from June 1930 to June 1931log book, port phillip sea pilots, ss victoria

A portable radio receiver and VHF transmitter used by the Sea Pilot Service. An early model used from about 1956 for ship-to-ship and ship-to-shore communication during arrival and departure procedures.Used by the Port Phillip Pilot service in the 1950sMiniphone radio receiver / transmitter and carry bag MFD by Commonwealth Electronics Pty Ltd Type No 180TRN Serial No 184communication, radio receiver and transmitter

Ship's binnacle mounted on wooden stand possibly ornamentalTrade Mark 'Sistral', Henry Brown & Son Ltd, Station Works, Barking, Essex, Type SJbinnacle, compass

A gift from Shipwright Laurie DilksIn 1965 the current wheelhouse was built on the Plover. While fixing a leak in the starboard window we found an inscription “This wheelhouse was built by C. Barnard and L. Dilks”. Laurie Dilks has been a wonderful source of information about Plover’s time with Ports and Harbours. The photos attached are from his personal collection. Around the same time, the bulwarks on the bow of the vessel were also built. The Plover was the first AWB to be enhanced. Others in the photos are the Ibis, Hydra and Murray.A wooden display board holding shipwrights toolsDonated by Laurie Dilks Shipwrighttools, shipwright, shipwright tools, plover

Obtained form the wreck of the Time on Corsair Rock and was collected by Norman Hunt who was a lighthouse keeper at Point Lonsdale. Door and Locker from the wreck of the Timeships fittings, lighthouse keeper, norman hunt, point lonsdale lighthouse

The last Pilot Boat flag to be flown from TSPV Wyuna hauled down on the 29 November 1979This flag is of historical significance to Queenscliffe [Home of the Port Phillip Pilot Service] as it was last flown by the TSPV Wyuna and was hauled down on the 29th November 1979Horizontal Bicolour flag, half white and half red from the Pilot Boat Wyuna."The last pilot flag flown from TSPV Wyuna hauled down 29.11.79". Evan Evans Flags, Melbourne.wyuna, pilot service, flag

The SS Edina's active service included the North Sea trade, ‘Crimean War’, ‘American Civil War’, Victoria’s west coast run, New Zealand to Melbourne trade, Queensland coastal trade, and of course, the Port Phillip Bay runs between the years 1880 to 1938.A saloon swivel timber chair with green velvet cushion and cast iron base from the SS Edinachair, steamers, ss edina