Demonstrates that methods and equipment use by the SEC to give destination information to passengers and later on advertising for events that passengers could access from the trams with a walk. Yields information about an event and its location, but the date of the event is unknown at this time.Sign - painted onto a SEC (very similar to a MMTB auxiliary destination board of the type that could hang on the front of a Ballarat tram car with the words "Bell St Only" on the front and a paper advert on the rear for the Homes and Industries Fair, at the Drill Hall in Curtis St. Has another former painted advertising sign underneath. Date of use not known at the time of acquisition. To be researched. Bell St was a destination on the Ballarat Destination roll, so it may have been used on trams which were not fitted with full destination rolls and then recycled by the SEC for advertising means. Metal sign, fitted with metal hanging brackets, riveted to sign on both sides, made from about 1.5mm sheet steel. Purchased by the Museum August 2015.trams, tramways, signs, auxiliary board, events, advertisements

Yields information about the Ballarat tram services in 1924.Sheet of foolscap paper with hand written note about services and the 1924 timetable pages from Reg Item 5503 glued onto the sheet. Contained within Reg Item 5507 - Foolscap binder with green covers, black binding edge and metal clips. timetables, tramways, services

Yields information about the work to rebuild the bridge over the creek on the Mt Pleasant Line.Newspaper cuttings pasted onto a single foolscap sheet, titled "Bridge Work Cuts Tram Line" dated 7/6/1955, with handwritten notes associated with the work on the Mt Pleasant line, Barkly St, Pennyweight Creek, underneath. Loose within the book was another cutting titled "Impossible", featuring a tram at the work site and the Detour sign - dated 5-7-1955, noting the work in almost complete. Contained within Reg Item 5507 - Foolscap binder with green covers, black binding edge and metal clips. barkly st, mt pleasant, bridges

Tramcar record for SEC Ballarat No. 16, builder, system location, short history and work in Ballarat. Loose on the same folder was a typed sheet of paper dated 21-6-55, noting the SEC proposal for this tram, not intended to recondition it. See btm5526i1.jpg See Reg Item 5614 for a photo of the 21E truck after the body was sold and disposed of.Yields information about the history of individual tramcars in Ballarat.Handwritten note on foolscap lined sheet outlining the history of Ballarat Tramcar No. 16, who built for, date to Ballarat, painting and other changes to the tramcar as compiled by Wal Jack. Part of a series on each SEC Ballarat operated tramcar, except for the ESCo trams. Contained within Reg Item 5507 - Foolscap binder with green covers, black binding edge and metal clips. trams, tramways, ballarat, tramcars, tramcars of ballarat, tram 16

Has a strong association with the person who the item was made for (Austin Brehaut) who worked for the BTM and the person who made it.Hand made woollen tapestry on a white tapestry backing, stapled to board, placed in a metal frame with a circular cut out off white card. Features a Ballarat bogie tram with Sturt St buildings in the background and the median strip of Sturt St with flowers in the foreground. May have had a glass sheet, as not secured in the frame when received. trams, tramways, tapestry, souvenirs, memorabilia

The 1919 bushfire was the worst the area suffered. The fire struck on Saturday afternoon on the 15th February. It destroyed the station at Lavers Hill and Crowes, departmental residences at Lavers Hill and Weeaproinah, the overhead bridges at Beech Forest and Wimba, and damaged the track at various points along the line so that two locomotives became temporarily marooned at Beech Forest.. By the following Tuesday a daily fire relief train had begun operation. By the following Sunday a special train loaded with army tents travelled through to Lavers Hill and deposited most of its consignment there because little remained of this sizeable settlement. An outsider would have had difficulty in picking the place. The letters of the Lavers Hill station nameboard had been burnt although the metal letters survived, and one of the local wags had rearranged them to read "LIARS HELL". By the 1920s water trains were being used to help fight fires, a simple NQR open wagon loaded with the standard 1500 litre square iron water tank.B/W. Crowes station sign, the remains of a chimney, galvanised iron sheet and a water tank, and two men gazing at the camera. Note in the background the clear felling of the timber.crowes; lavers hill; beech forest; weeaproinah; wimba; railways; bushfire;

Detailed in The Met colour scheme of the 1980s with the logo of the early 1980s. Demonstrates an operable model of a Melbourne SW5 class tram.Model of Melbourne Melbourne tram W5 (actually an SW5) No. 812, electric model, made by Cooee Concepts Pty Ltd in China. The model is packaged in a wooden packing case with a blue felt base, contained within a cardboard outer case. The cardboard cover or case has a printed sheet giving details of the model and the history of the W5 Class tramcar. The wooden case has a brass plate detailing the contents. Scale 00 or 1:76. Model made from plastic and metal, with operable lights and motors with operable trolley poles, swiveling bogies, the destination of St Kilda, showing route 16. Headlights function in the direction of travel. The package has a manufacturing date of 2008 printed on it. Contains a plastic cover strip, a plastic holder for the tram, a plastic lift-out strip, a printed Certificate of Authenticity, No. 553 of 700, and a folded sheet giving instructions for the use of the tram on a model tramway - up to 15V DC.models, the met, tramcars, w5 class, sw5 class, tram 812, cooee, cooee collectables

Detailed in Bendigo Tramways livery of their Restaurant Tram "Ninesevensix". Demonstrates an operable model of a former Melbourne W6 tram as a Bendigo Restaurant tram.Model of Melbourne Melbourne tram W6 976 dressed as the Bendigo Tramways Restaurant / Cafe tram "ninesevensix", electric model, made by Cooee Concepts Pty Ltd in China. The model is packaged in a wooden presentation case with a black felt base, contained within a cardboard outer case. The cardboard cover or case has a printed sheet giving details of the model and the history of the tramcar. The wooden case has a brass plate detailing the contents. Scale 00 or 1:76. Model made from plastic and metal, with operable lights and motors with operable trolley poles, swiveling bogies, a destination of "Special" and showing route 01. Headlights function in the direction of travel. The package has a manufacturing date of 2008 printed on it. Contains a plastic cover strip, a plastic holder for the tram, and a plastic lift-out strip.models, tramcars, cooee, cooee collectables, bendigo tramways, tram 976, restaurant tram

Model of a Bendigo Birney tram prior to the painting of the safety stripes by the SEC during the 1960s. Not fitted with a trolley pole. The sheet gives the story of the tram in Adelaide and Bendigo and colour schemes. The Tenshodo bogie would have enabled the tram to be motorised. Made by John Eastaff Model (JEM) of Adelaide.Demonstrates an model kit that represented the Bendigo Birney trams.Model of Bendigo Birney tram by JEM Models, comprising cardboard box, cast metal parts and instructions. HO Scale. In box as received from the donor is a Tenshodo WB 24.5 motorised bogie or wheel set or truck.models, tramcars, bendigo, birney tramcars, jem models, john eastaff models