Black and white photograph of jetty below the homestead of Nyerimilang. Crane positioned at end of jetty, a fenced barge used for transporting sheep is at anchor behind the jetty. Gippsland Lakes Victoriajetties, waterways, tourism

Date made 10 April 1999Colour photograph of the construction of the road approaches and abutments for the new North Arm bridge, earthmoving machinery and crane on southern approach looking towards northern abutment. Lakes Entrance Victoriabridges, machinery, construction, roads and streets

Also black and white print 10 x 17.5 cmBlack and white photograph showing Eastern Pier and Entrance to Gippsland Lakes from Bass Strait. Works machinery, buildings, cranes etc still in place. Lakes Entrance Victoria waterfront, piers

Colour photograph showing old crane and Snapper Cottage on the Western side of the Entrance, shoreline stabilised with rock ouside the original walings which edged the lakes, Lakes Entrance Victoriaships and shipping, transport, waterways, gippsland lakes

Black and white photograph of Eastern Wharf, Harbecks Jetty, Lakes Entrance Victoria with steamers Lady Harriot, Wyrallah and Stormbird alongside, goods on wharf with crane in background. c 1910waterways, ships and shipping, jetties

Part of a 43-photo record of the MMBW�s engineering feat in drilling a 12 inch pipe line up to 40 feet deep through rock hardened by volcanic action associated with geological fault that occurs along the line. The work took place from October 1979 to May 1980 on the southern boundary of Hubbard Reserve, North Ringwood. The collection was presented to the Ringwood Historical Research Group by J Clarke on 9th June 1980.E561 N3 Feb 1980 A43 Swivel crane over first hole west of boring pit in 39 Burlock Avenue. The track used to reach Burlock Avenue on left.

Part of a 43-photo record of the MMBW�s engineering feat in drilling a 12 inch pipe line up to 40 feet deep through rock hardened by volcanic action associated with geological fault that occurs along the line. The work took place from October 1979 to May 1980 on the southern boundary of Hubbard Reserve, North Ringwood. The collection was presented to the Ringwood Historical Research Group by J Clarke on 9th June 1980.E561 N12 Feb 1980 A43 Line of tunnel shafts at 29-30 Burlock Avenue showing swivel cranes 5 and 6 from the bore-hole in Lot 7

Also a black and white photograph taken at the installation of the waterwheel at Tavern by Whiters Street Crane Hire. It was designed by Michelle Shugg built by Rob Davis of red cedar taking fourteen weeks to make.Black and white photograph showing staff of newly opened Waterwheel Tavern showing Tammy Glover, Donald Brennan, Ron Marley and George Clements behind the bar Lake Tyers Beach Victoriabusinesses, construction

EIG School - Ralph Birrell Collection. - Construction of Latrobe Uni. C1967. Bendigo Institute of Technology, Engineering School, Applied Science. Walls well underway, crane and truck also in shot.Kodakeducation, tertiary, latrobe university bendigo, eig school - ralph birrell collection. - construction of latrobe uni. c1967. bendigo institute of technology, engineering school, applied science. walls crane truck

Blue printed plan view of Malcolm Moore Crane Factory with lettered index of areas within the factory from 1979 some with names listed including Norm (presumably Norm Robinson).built environment - industrial, industry, engineering, malcolm moore pty ltd, norm robinson

J Blight's quarry is located on Mt Alexander. It was opened up by Blight, a Cornish born quarryman turned gold-miner, in 1862. The quarries supplied Harcourt granite to monumental yards and building sites all over Australia. The photo depicts the average workforce of the Harcourt granite quarry as well as the methods of transportation of the heavy blocks of stone. B & W photograph showing 19 workers on the floor of the quarry using cranes to lift large blocks of granite onto lorries drawn by teams of horses. Several women and a child are watching

Taken after the launch of S S Gippsland in 1908.Black and white photograph showing shipping at Paynesville Slipyard, shows barge with crane on right, S S Gippsland next, several larger and smaller boats and small jetties. Paynesville Victoriaships and shipping, jetties, slipway

Colour photograph of Metung wharf showing crane at end of wharf with small runabout on one side and larger boat outside, Boole Poole seen across Bancroft Bay Metung Victoriahotels, jetties, waterways

The photograph shows the construction of the Stores building at Preston workshops during 1925. In the middle foreground is a lifting jib crane. The Lifting Shop is the background. See also items 5526 and 7418 for other construction photographs.Yields information about the then new Preston Workshops being built.Photograph, black and white, on Kodak Velox paper with notes on the rear.On rear in black ink "17/6/25" tramways, preston workshops, construction, buildings

BINSNES (3) 1974: Ordered by Dillingham, Jebsen Shipping Corp, Liberia, from Sumitomo Heavy Industries Ltd., Uraga (Yard No. 986). 3.12.1976: Launched. 27.4.1977: Completed. (O.N. 6815). As built: 19,196g. 12,572n. 34,544d. 180.02(BB) x 28.45 x 10.891 metres oa. Post 1997: 20,589g. 11,810n. 34,545d. 7-cyl. 2 S.C.S.A. (760 x 1,550mm) Sulzer 7RND76 type motor engine, manufactured by the shipbuilder at Tamashima, geared to a shaft with a controllable pitch propeller. 14,000bhp, 15½kts. Bulk carrier with four 15-ton cranes capable of operating grabs carried aboard. Leased to the British Phosphate Commission. 1981: Transferred to Pacnorse Shipping International Ltd. 1982: Transferred to Sanders Shipping Ltd., (AS Kristian Jebsens Rederi, managers), Philippines, and renamed GENERAL ROXAS. 1986: Transferred to Pacnorse Shipping Nine Ltd., (same managers). 1986: Sold to the USSR-Black Sea Shipping Company, Russia, and renamed VASILIJ (VASILIV?) AZHAYEV. 1997: Hero Maritime Ltd., (Ocean Agencies Ltd., managers), St. Vincent and The Grenadines, and renamed KARAGOL. 1999: Sold to Flagship Company Ltd., (Barclay Shipping Ltd., managers), Malta, and renamed MILTIADIS M. Sold to Shandong Province Marine Shipping, named Shun Ying or Shunying (Apr 2008?). Ship builder's model of bulk carrier M.V. Binsnes IMO 7426203 built in Japan 1976, 19,196 gross tonnes. Model - Hull painted in burgundy and grey, with four cranes and detailed deck fittings with white and gold highlights, a Liberian flag flying from the stern, raised on a laminated wooden base (lacking perspex cover). Original ship 590.66' x 93.34' x 35.73' (180.02 x 28.45 x 10.89m). Original ship was built by Sumimoto Heavy Industries and leased to the British Phosphate CommissionPlaque at base: " M.V BISNES/ PRINCIPAL PARTICULARS OF 33,750 LTDW/ DIESAL BULK BARRIERS/ Length (overall) abt. 180.00 M/ length (between perpendiculars) 170.00 m, breadth (moulded) 28.40 M, Depth (moulded) 15.00 M/ Draft (designed loaded, moulded) 10.84 M/ Deadweight abt. 33.750 LT/ Gross Tonnage abt. 18,800 T/ Cargo Hold Capacity abt. 42,500 M/ Main Engine/ Type Sumitomo - Sulzer 7RND68 type main diesel engine/ Max Continuous Output BHP 14, 00 PSat 122 rpm/ Service speed at designed draft abt. 15.7 knots/ classification Lloyd's register of Shipping/ Keel -- Laying September 1976/ Launching December 1976/ Delivery April 1977/ Owner : Dillingham Jebsen Shipping Corporation, Liberia/ Builder: Sumitome Heavy Industries Ltd., Japan" second plaque: "MANUFACTURED BY/ FUJI BIJUTSU MOKEI CO., LTD/ TOKYO JAPAN" On model "Binsnes Monrovia"

In 1970, All Saints' Anglican Church was rebuilt on the corner of Church and Grimshaw Streets Greensborough, replacing the timber church. This photograph shows building works underway with the spire being craned into place. Taken in the late 1960sDigital copy of colour photographall saints anglican church greensborough

This item was made by John Russell Senior, a blacksmith, wheelwright, farmer and later chairman of the Orbost Butter Factory, makers of Sunny South Butter (today part of Murray Goulburn Co Ltd). The buggy lifter was handed down to George Henry Russell (Doug), the second son between 1970 and 1973.Blacksmiths played an essential part in the regional parts of Victoria and were required to use their ingenuity and skills to design and make tools needed on local farms. This item is an example of a tool specifically designed for a horse-drawn wagon. Horse-drawn wagons are an important part of Australia’s agricultural history. Light buggies were popular with farmers for trips into town before the common use of motorised vehicles.A metal buggy wheel lifter. It has two hooks connected at the top by a bolt and a shackle. The hooks fit under the rim to enable the wheel to be lifted with a pulley / crane system operated by a man or a horse.tool buggy-lifter russell-john blacksmith wheelwright