Margaret Picken (1950-) trained and worked as a cartographic draftsman from 1968-1975 within the mining industry. These skills were readily transferable to work as a property illustrator for the real estate industry. Process: “Sketches were ordered by phone initially as there were no mobile phones or computers then. I would take our 2 year-old son with me to the houses when the other 2 boys were at school. I photographed houses with a Polaroid camera and made a ‘thumbnail’ sketch while there. The photos were used to scale off a sketch in pencil and then that sketch was overlaid with drafting film and the ‘pen and ink’ was completed. This process was the only one I used the entire time. Polaroid photos gave an instant usable photo. I then delivered the sketches by hand to the offices. There were deadlines each week on a Tuesday.” “… about 2003 coloured photos began to take over the sketches and mainstream companies replaced sole traders like myself providing a one-stop shop for all advertising. I produced my last Real Estate sketches in late 2005.” Margaret Picken (1950-) trained and worked as a cartographic draftsman from 1968-1975 within the mining industry. These skills were readily transferable to work as a property illustrator for the real estate industry. This architectural drawing is one of a series created by Margaret Picken for a range of real estate agents in Melbourne between c.1983 and 2005. Each work is signed and dated. Margaret Picken approached a number of historical societies in July 2020 with a view to donating her work. Sketches for post code 3127 are held by this collection. Others for suburbs including Ashburton, Balwyn, Camberwell, Canterbury, Blackburn, Box Hill, Burwood, Glen Iris, Hawthorn, Kew, Mont Albert North and Nunawading have been donated to the relevant historical group in those suburbs. (See Balwyn Historical Society, Box Hill Historical Society, Camberwell Historical Society, Hawthorn Historical Society, Kew Historical Society, Whitehorse Historical Society). In some cases, this collection also has a copy of the matching newspaper advertisement. Pen and ink architectural drawing on drafting film of 7 Arundel Crescent, Surrey Hills (VIC) by Margaret Picken. The drawing, dated 1995, was commissioned by the Woodards real estate company.7 ARUNDEL CRES., S. HILLS / MARGARET PICKEN ~ 95 / WOODARDS ~ C'WELLarchitectural drawing, houses, surrey hills / mont albert (vic.), artists, margaret picken 1950-, californian bungalow, arundel crescent

Each sheet or run details where the driver/conductor would sign on, time, the trips, meal breaks, finish time. Shows the tram operations with many short workings with some very detailed instructions.Demonstrates SEC crew timetables or sheets for tram operations.Set of Table or Run sheets for the Ballarat Tramways. Two tables per sheet, punch along top edge, with ring protectors on top sheet. Groups of sheets have been stapled centrally along the top edge. See Reg Item 3423.1, 3423.2 for Weekdays Motorman and Conductors. Both items dated January 1970. Ring protector hides actual day. 3424.1 - Saturdays - Runs 1 to 16, some carbon copies, mostly typed originals. 3424.2 - Sundays, Runs 1 to 20 (even numbers only) and run 21. All carbon copies. No matching conductor sheets. Full scan of document added as a pdf file 5/6/2019. On front of folder in black ink " BTPS 810" (3424.1).trams, tramways, timetables, sec, ballarat, crews

This uniform belonged to Sapper Hughes 3795948 of the Royal Australian Engineers Corps. By the date on the uniform, it is assumed that he served C 1968.This uniform has significance as an example of a uniform worn by soldier ranks for daily work and dress parades.Khaki coloured long trousers with attached suspenders. They have a button up front (5 brown plastic buttons). There are two pockets on either side of the trousers and one button up pocket on the back right with a flap that is fastened with a single brown plastic button. There are three extra brown plastic buttons on the back exterior of the waistband and six belt loops on the whole length of the waist band. The interior pocket fabric is more light weight and a slightly more green in colour. The interior of the right back pocket includes a white patch of fabric with printed inscriptions and further inscriptions written in black ink just above. The suspenders are composed mostly of blue, grey, beige, black and cream striped thick fabric. There are also silver coloured metallic components (which include inscriptions) and leather sections, most of which have a reddish/brown coating on the exterior and a white coating on the interior. One leather component has inscriptions in black ink on the interior as opposed to a white coating. The suspenders are attached to the trousers by six brown plastic buttons on the interior of the waistband. Back pocket interior inscriptions on the green fabric: HUGHES / 3795948 Back pockket interior inscriptions on the white fabric: E.W. P/LTD. / SOUTH AUSTRALIA / 1968 / (a symbol of a broad arrow) / Class 8405-66-025-6405 / Batch 67 / Mill / Size and Waist 28C / Matching Jacket 35 /36C / DRY CLEAN ONLY / CREASES SET BY SIROSET / REPRESS ON ORIGINAL CREASES / MENDING PATCH ATTACHED / NAME HUGHES. J.W. / ARMY No. 3795948 8PL Bcoj Identical metallic clip inscriptions on two of the suspenders: POLICE / (embossed image of a police baton)royal australian engineers, warrnambool rsl, warrnambool, engineer, hughes, sapper hughes, 3795948, hughes 3795948, uniform, army uniform, trousers, army

Donated by Lewe who is a local member of Beechworth RSL.The social significance is that it represents Lewe’s service and is shared by donating his jacket.Jacket service dress blue grey with insignia rank for leading aircraftsman on the upper sleeves of both arms.Shoulder flashes with the word,Australia , on both shoulders.8 gold buttons in parallel columns of 4.2 buttons one on each breast pockets.Gold airforce eagle on both upper lapels.Label on outside of inside right breast pocketCloth label 75mm wide by 80mm long. Faint grey no,s - “12 “at top left corner”,8051” at right corner and “12” on bottom left corner. Ink wording as follows: “KENTISH CLOTHES “ on top first line of label,”S.A./1972/Gov,t or Defence arrow sign/8405-66-037- 4802/size 39 REGULAR/MATCHING TROUSERS/35 WAIST/SERVICE NO” with dotted line for wearer to write on.This is blank. “NAME” with dotted line also blank.” DRY CLEAN ONLY/REPRESS WITH DAMP CLOTH/DO NOT SIRO-SET” on bottom of wording.jacket, service, dress

A gentleman's chair, gent's chair or grandfather chair is a term usually applied in Australia to a deep upholstered Victorian easy chair, often button-backed and with upholstered arms. The chair generally stood on short cabriole legs and had a 'spoon' or a wide balloon back. The 'show wood', that is, the polished frame, was usually mahogany or walnut, although many examples in Australian red cedar have survived. There are Australian versions of the gentleman's chair, ladies chair and matching settees, usually made from cedar, and occasionally from blackwood. As cedar is a softer timber than walnut, mahogany and rosewood, from which the English versions were made, the carving is usually not as crisp as in the imported version. However the Australian blackwood gentleman's chair is often difficult to distinguish from a good quality English walnut example. The Edwardian form of the gentleman's chair is much squarer in outline, with short turned legs and the arms are often supported by spindles. There was sometimes a row of spindles, like a gallery, beneath the top rail. The chairs were frequently upholstered in leather.An item probably made in Australia during the latter half of the Victorian era and is significant as it was made in Australia at a time when furniture and many other household items were imported from either America or England.Cedar Gentleman's armchair, upholstered and buttoned in brown leather, scalloped and carved with Prince of Wales Feather on back, arms are scrolled and carved with Acanthus leaf design and finished on tulip turned legs with brass and porcelain castors. circa 1870 Australian made. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, furniture, chair, armchair

The A.N.A. Hall in View Street was opened in August 1894. The Sandhurst Branch was started on August 26th, 1874. In July 1874, several gentlemen met together, and when a sufficient number had given in their names and sufficient promises of support had been received, the board of directors were approached with a view to forming a branch of the association in Bendigo. On August 26, 1874, the inception took place. The building was demolished in 1971. Plaque formerly attached to the lower edge of the framed photo collage of the Building Committee of the Sandhurst Branch of the Australian Natives' Association. It lists names of men in the photos. Names printed on gold coloured paper mounted on piece of masonite, matching the position on the collage. "BUILDING COMMITTEE - 1894" J H CURNOW M J CAHILL Dr J QUICK D A CAMPBELL M J E STAPLETON A DUNSTAN Dr J MURPHY C DALEY (President) A G DUNLOP W CROWLEY A J HAMPSON W BEEBE J HOGAN T GLASS J B YOUNG R H ABBOTT A.N.A. HALL A G DAYMOND D EGAN J DANIEL J BUCHAN S A COCK ana, australian natives' association, sandhurst, photo collage

Subdivision plans are historically important documents used as evidence of the growth of suburbs in Australia. They frequently provide information about when the land was sold on which a built structure was subsequently constructed as well as evidence relating to surveyors and real estate and financial agents. The numerous subdivision plans in the Kew Historical Society's collection represent working documents, ranging from the initial sketches made in planning a subdivision to printed plans on which auctioneers or agents listed the prices for which individual lots were sold. In a number of cases, the reverse of a subdivision plan in the collection includes a photograph of a house that was also for sale by the agent. These photographs provide significant heritage information relating house design and decoration, fencing and household gardens.An old inscription on this photograph identifies it as ‘an elegant timber villa in High Street. It occupied part of Lot 91, bought by Edward Glyn in the land sale of 16th October 1851, and run as a flower farm’. The subdivision called the ‘Flower Farm Estate’ in East Kew occurred in 1922. [The subdivision plan is on the reverse of this photo.] The Estate included 61 lots on either side of Boorool Road between High Street and Harp Road. In the MMBW Detail Plan 2017 of 1926, a number of these new villas had already been built. Matching houses with MMBW maps can always be a challenge, however if this house was near the corner of Boorool Road and High Street, it seems to fit the profile of a house called ‘Maxton’ (demolished).Photographer's name on photograph, lower right, and stamp on mount lower right: "A. Aberline, Glenferrie".houses - maxton - high street - kew (vic.), violet farm estate, subdivisions - kew (vic.)

.1 - Book - 4 pages, (brown paper) + card covers (brown printed matching brown on one side) - side stapled, titled "Cable Trams", published by the Science Museum of Victoria, Swanston St, at the time of the launch of the No. 1 cable tram set in the glazed display case 1/5/1975. Gives a description of cable tramways, a map, summary history, winding houses (power), the trams, cable, bell punches, grips, crews and "mind the curve". .2 - Program for the launch event and a list of speakers - Judge R. J. Leckie, F. R. Kirby, R. J Hamer and R. H. Fowler of the Museum. Also contains a pamphlet for the Science Museum of Victoria. Two copies held.trams, tramways, cable trams, science museum, displays

Part of a collection of items donated by Mrs Robyn Adams. Mrs Adams' father, Victor Clyde, was a wool grower who owned and used all of the items donated.Light pale blue/green lined paper page. Top part of page has typed black ink describing instructions on how to fill in lined section below, beneath headings reading -GOLSBROUGH, MORT & COMPANY LTD, MELBOUNRE- and -OWNER'S OR CLASSER'S SPECIFICATION OF WOOL CLIP-. Lower two-thirds of page is bordered with pink lines and split into six coloumns under headings. Fields can be filled in with information about wool lip/size/wiehgt/quality/bale stencil number/etc. Reverse of page is the same. Page has one vertical fold line in the centre and three horizontal fold lines. There is a dark blue line on the front and matching larger stain on the back, most likely from a carbon copy paper.elder smith goldsbrough mort limited, waybill, wool sales, wool clip, mrs robyn adams

Now 100 years old, this quilt belonged to the donor’s grandfather John William Huffstutter. John was Born in 1898 in a log cabin in the Ozark mountains of Missouri, USA. Tragically, John’s mother died when he was four years old. John said that he could always remember her voice calling his name as he hid under the porch in one of the many thunderstorms that frequent the area with his dog. John was raised by his grandmother and was treated as the youngest to her other children, growing up with his aunties and uncles rather than brothers and sisters. John began to study engineering at the State University of Iowa before serving in the US Army Engineer Corps in The Great War. He enlisted when he became eligible and served briefly before the Great War ended. He then returned to his engineering studies in Iowa, and shortly after finishing his studies got his first job with Westinghouse in Pittsburgh at age 23. It was when John was leaving for this job that he was given the quilts as a reminder of home from his grandmother Sarah Jane "Sallie" Tindall Coble, and her daughter (John's Aunt) Ottie Maude Coble Bittick. Widowed at age 78, John took to sleeping in his screen porch under one of these quilts. John remembered one winter in Missouri waking in his log cabin to find snow covering him and his quilt. When he died at age 94, the quilt he used was completely worn out and discarded. This remaining quilt was shipped to Australia, where Carol’s (the donor) immediate family had emigrated in 1970. Opening the box that contained the quilt released a wave of comforting smells, emotions, and a flood of childhood memories. Carol distinctly remembers sleeping under these quilts for afternoon naps at her grandparents' house. The quilt is 74 x 80 inches (1880 x 2030mm), matching the size of a modern-day king bed. It is made of various four-inch (100mm) squares. These squares are made of old men woollen suits in dark colours of browns and greys. The quilt is layered with a wool backing fabric and a batting lawyer of unknown material, possibly cotton or wool. The quilt is tied together with red wool yarn and the backing fabric is folded over the edge to be used as a binding. Embroidered across the front of the quilt in purple wool yarn is "John Huffstutter", "13 Oct 1921". A small, printed cloth label "HUFFSTUTTER" is pinned on the reverse of the quilt. The quilt is well-worn but in good condition considering its age. The care instructions passed down by word of mouth with the quilt were to "never wash, only air".Front embroidered. Purple handstitching: "John Huffstutter / 13 Oct 1921" Reverse. Printed cloth label: "HUFFSTUTTER"ozark, missouri, usa, textile history, quilt heritage

Land for the Methodist Church in Wodonga was reserved in 1864. By 1865 the Reverend Francis Neale, a Wesleyan minister was appointed to Albury from where he supervised the congregation at Wodonga Creek until a church was built in 1873. By 1885 Wodonga and the other preaching places on the Victorian side of the Murray had become a separate circuit under the Reverend L. J Rowlands. This circuit included Bethanga. Kiewa. Leneva, Kergunyah and Bonegilla. In the 1960s the Methodist congregation built a new chapel in Hovell Street, Wodonga. The creation of the Uniting Church during the 1970s meant that the services were held in the former Presbyterian Church and joint Sunday School classes were conducted in the Methodist Hall. In 1961 the Church building and land was purchased by the Ukrainian Community for £2,000. Ukrainian Catholic families in Wodonga donated £100 each towards the purchase. Additional fund raising such as carol singing in nearby towns (Benalla, Wangaratta, Albury and Wodonga) assisted with the purchase of the Church. The former Methodist Church was in poor condition and the members of its new congregation undertook the replacement of the floor, the footings, replastering of the walls and the construction of an altar. The renovations cost a further £400. Once a month a priest came up from Melbourne to conduct services in the Church. On completion it was blessed by Bishop Ivan Prasko to become St Olga's Catholic Church (Ukrainian). In 1965 the Church was dedicated to its patron St Volodymir, with Bishop Varlamm (Sydney) and Bishop Donat (Melbourne) taking part in the ceremony. The members of the Ukrainian Catholic community also built a hall and smaller chapel in Hunt Street, Wodonga. With a declining congregation, this property became more manageable to maintain than the original brick building and the decision was made to close the building in 2010. In 2022 the building and extensive block of land in Church Street was sold commercially for potential redevelopment.These images are significant because they depict an early Wodonga Church building.A collection of coloured photographs depicting the first Methodist Church in Wodonga, Victoria It was a red brick church with a steeply pitched gable roof and parapeted gable walls. There was a small front porch with matching roof and gable treatment to the front. Simple timber Gothic windows were along the sides, with a tri-partite window above the porch. Two sections of this window featured stained glass, the other was opaque glass. Red brick buttresses were topped with white-painted render, as were the parapets, and the windows were also outlined with white painted render. Timber joinery was painted white. A front path led directly to the porch and the Church was flanked by mature oak trees. A small, relatively modern red brick skillion extension was added to the rear of the building.wodonga churches, methodist church wodonga, ukrainian catholic church wodonga

In October 2011 the Ballieu Government announced funding cuts to public and private technical training organisations as a cost saving measure. The government reduced funding for seven subject areas including business and clerical, finance and hospitality, totaling $300 million across the state. During a visit to Ballarat on 15 June 2012 Premier Ted Ballieu was met by hundreds of protestors angry at the TAFE cuts. It was expected that the Ballarat TAFE sector would be cut by $20million (or 40%), and up to 60 TAFE programs would be cut. A report in 'The Australian' on 01 June 2012 projected the TAFE cuts would result in the loss of almost 2000 jobs across the state. 'If the projections are correct, Victorian college redundancies would dwarf those in manufacturing and aviation, matching the worst predictions of job losses across Australia's entire banking sector.' Ballarat's National Tertiary Education Union (NTEU) and the Ballarat Trades and Labor Council (BTLC) are following up their earlier protest campaigns with a monster meeting to be held at Ballarat Trades Hall, Camp Street on Sunday 8 July. The monster meetings will take place in close proximity to Bakery Hill where over 10,000 diggers protested against an the gold license system in 1854. .1) A brown and black Monster Meeting poster based on the Eureka Monster Meeting poster. The post uses text similar to the 1854 Eureka Poster to advertise a meeting to fight TAFE cuts as announced by the Victorian Government led by Premier Ted Ballieu. .2) A white hand flier with red text calling on the people of Ballarat to attend a meeting at Ballarat Trades Hall to fight TAFE cuts. Both items are authorised by Jeremy Smith NTEU UB branch President and Brett Edgington BTLC President.university of ballarat, national tertiary education union, jeremy smith, monster meeting, brett edgington, ballarat trades and labour council, tafe, trades hall, ballarat trades hall, eureka, eureka stockade, union

Uniform issued to "LOCKYER" 114493.Jacket - khaki colour wool serge fabric, Battle dress style, belted at waist with metal buckle. Dark green plastic buttons. Collar, shoulder epaulettes, two front pockets with concealed button down flap and sleeve cuffs. Shoulder epaulettes - rank three pips, red, cream and brown embroidery for Captain. Shoulder sleeve insignia, red fabric with dark blue embroidered lettering. "ROYAL AUSTRALIAN ARMY/ ORDNANCE CORPS". Green colour cotton twill fabric pocket and waist lining, manufacturers white cor=tton label inside pocket lining. 2. Trousers - khaki colour wool serge fabric, Battle Dress style, with fob pocket, two side pockets, one back pocket with concealed button down flap. Green colour polyester fabric lining with manufacturers white cotton label inside on back pocket, 6 button fly. Manufacturers information on labels - black ink print. 1. "A.G.C.F./ VIC 1977/^ /8405.66.025.6423/ SIZE OF CHEST/ SIZE 109/ 112PR/ YARRA FALLS 69/ BATCH, 21657/ DRY CLEAN ONLY/ CREASE UPPER/ HALF OF LAPELS ONLY/ NO./ NAME" Handwritten - blue ink pen - "LOCKYER/ 114493". 2. CONWAY BROS. PTY LTD/ ADELAIDE ^ 1968/ CLASS 8405-66-025-6199/ Y.F. PP2/ SIZE & WAIST 41PR/ MATCHING JACKET 43/44 P.R. / Dry Clean only/ Repress on original seams/ Creases set by Si-ro-set./ mending patch attached/ NAME/ ARMY NO." Handwritten black ink pen "LOCKYER/ 114493"uniform, army, battle dress, lockyer

These trousers are part of a Royal Australian Army Ordnance Corps uniform. The Royal Australian Army Ordnance Corps (RAAOC) is responsible for various logistics and organisational operations, such as maintenance of parachutes, fuel distribution, personnel administration, exlosive disposal and laundy operations. The trousers were manufactured in 1969 and were worn by an unknown RAAOC serviceman. The patches on the sleeves of the corresponding jacket denote that he had earned qualifications as a parachuter and a marksman and that he was a Warrant Officer 1. Due to the period of manufacture it can be presumed that the serviceman whom this uniform belonged to served in the Vietnam War.As historic military uniform trousers dating to 1968, it is presumed that this item would have been used in service during the Vietnam War. The wearer of the uniform is unknown, however the patches and flashes attached signify that the serviceman worked for the Royal Australian Army Ordnance Corps, earned qualifications as a parachuter and marksman and ranked highly as a Warrant Officer 1. The item is representative of a type of uniform worn by high ranking RAAOC servicemen during the 1960’s. It is also in very good condition for its age.khaki coloured trousers which are composed of a heavy fabric. The trousers button up at the front with 6 plastic buttons. There is an additional strip of fabric attached to the right-hand fly which can be fastened with an extra button on the interior of the left-hand fly. There are an additional 6 buttons along the interior waistband. There are also three buttons on the exterior waistband down the front and a buckle. The buttons are composed of brown plastic. There are two open hip pockets, one on either side, and another button-up pocket on the right-hand side of the back. There is a white label with inscriptions attached to the interior of the back pocket with an extra piece of fabric attached for mending patches.Printed in black inscriptions on the white label: CONWAY BROS. PTY. LTD ADELAIDE 1969 (a broad arrow) Class 8405-66-025-6183 A W M 7 (these characters are stamped in faded black ink) SIZE & WAIST 33R MATCHING JACKET 37-38R in a box are the words: DRY CLEAN ONLY. Re-press on original seams. Creases set by Si-ro-set. Mending patch attached. (end of box containing words) NAME.....DOCKSEY (‘Docksey is in hand-written black ink) ARMY No.....216308 (numbers also hand-written in black ink) (the number 40 is also wrtten in faded black ink in the top right corner of the label)military, army, raaoc, marksman, royal australian army ordnance corps, parachuting, warrant officer, uniform, trousers

Clothing. Woman's black waist length long sleeved silk blouse. Wide scooped neckline with fold over collar (10 cm) with rounded corners. Kimono cut sleeves with geometric pattern of black beading at wrist (5 cm wide). Front of bodice has crossover section with fastening across left shoulder. Front section has 30 cm panel of black beading geometric pattern. Waist is gathered by a cotton tape casing 2.5 cm above the hem. The front opening is on the LHS from shoulder to waist with eight metal hooks and cotton loops. Opening across the left shoulder is fastened with four hooks and loops and one press-stud. Back of bodice has matching panel (30cm wide) with a black beading geometric pattern. Garment is unlined. Beading patterns use 1mm black beads.costume, female, woman's black silk blouse.

Full length skirt, with a three-quarter length over-skirt, edged in braided embroidery. Over-skirt is attached at the waistline, with a band of tape, and separates on the left hand side waistline. Stitched to the underskirt at the front, and edged with a .5cm dark olive coloured braid. The braid extends around the hemline of the overskirt in a looped pattern. Fabric has a woven stripe-a narrow stripe of lighter colour, and a .75cm stripe of dark grey edged with tan. Skirt fully lined with brown cotton fabric. Centre back plackett fastens with one large metal hook and eye, and six smaller hooks, and hand made cotton loops. Skirt has matching bodice 11400.744. This two piece outfit - skirt and bodice, was made by Laura's Mother in 1908, and mostly by hand. She wore it also to Mass in 1913. It is made of material called "Resilda''.costume, female, brown striped long skirt

This kettle was made in the 1880s.Cast iron kettle 16 centimetres diameter at its base and 18 centimeters diameter at its widest point 11 centimeters above the base, it then curves up another three centimetres where there is a ten centimetre diameter hole. A non-matching metal lid with a one and a half centimetre knob covers the hole. Three centimetres from the base of the kettle there is a two and a half centimetre diameter spout which tappers to one and a half centimetres, it's 14 centimetres long and has two bends. A handle is attached to the top of the kettle, it is two centimetres wide, it extends two centimetres straight up at both ends that are 12 centimetres apart then forms an open oval 20 centimetres wide and nine centimetres high, it's one and a half centimetres thick for 11 centimetres at the top and has groves for fingers on the under edge.K23.1kettle, cast iron

This hand-knitted, white double-bed bedspread and matching round cushion were hand-made by Vera Giles. The process took her nine-and-a-half months. She presented it to Flagstaff Hill to be part of the Giles Collection. There are many 19th-century items of furniture, linen and crockery donated to Flagstaff Hill Maritime Village by Vera and Aurelin Giles. The items are associated with the Giles Family and are known as the “Giles Collection”. These items mostly came from the simple home of Vera’s parents-in-law, Henry Giles and his wife Mary Jane (nee Freckleton), whose photos are in the parlour. They married in 1880. Henry Giles was born at Tower Hill in 1858. He was a labourer on the construction of the Breakwater before leaving in 1895 to build bridges in N.S.W. for about seven years. Mary Jane was born in 1860 at Cooramook. She attended Mailor’s Flat State School where she was also a student teacher before, as a family legend has it, she became a governess at “Injemiara” where her grandfather, Francis Freckleton, once owned land. Henry and Mary’s family of six, some of whom were born at Mailor’s Flat and later children at Wangoom, lived with their parents at Wangoom and Purnim west, where Henry died in 1933 and Mary Jane in 1940.The Giles family collection has social significance at a local level because it illustrates the level of material support the Warrnambool community gave to Flagstaff Hill when the Museum was established. The handmade items were knitted in the late 20th century using a craft and design that augment the late-19th to early 20th-century furnishings where they are displayed.Hand knitted white cotton bedspread and cushion with knitted floral pattern. Items are both part of the Giles Collection. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill-maritime-museum, flagstaff-hill-maritime-village, knitted bedspread, knitting, bedspread, giles collection, henry giles, vera giles, tower hill, cooramook, warrnambool breakwater, mailor’s flat, wangoom, manchester, cushion

Donated by Sir Henry Newland.The samovar stands 41cm high, and is 39cm wide across the handles. It is made of Sheffield plate, and dates from the late 18th century. It is supported on a square base with four cast lion’s feet attached by elaborate mounts at the corners. The main vessel or tank is circular, and set on a short columnar stand. These elements are heavily fluted. There are two elaborately decorated solid cast silver handles attached to the sides of the tank. A long spout with a cast ivory handled tap extends from the bottom of the tank. The lid is plainer, with a fluted and scalloped edge, and is capped with a finial. Inside the tank is a cylindrical immersion container for hot coals, a primitive type of heating element. There is a crest, probably that of the original owner, engraved on the shoulder of the tank above the tap. A samovar is a Russian tea urn but the College’s samovar is not a tea urn, as it does not include the stand or the teapot. Undoubtedly it was intended to provide hot water for tea, and the absence of a matching teapot indicates a cultural difference between the English and the Russians, in the way in which they went about brewing tea. It is a showpiece, intended for use and display in the reception rooms of the house. In the 18th century tea was still a rare and exotic import from the Orient, so the serving of tea was an important act of hospitality and a statement of social status.Sir Henry Newland was the College President 1929-1935Antique sheffield plated samovar with shell design and pressed rib border, finely worked casted handles, spout with swivel top, with tapered centre column, square shaped base with cast lions feet

This is the original book “Warrnambool Past & Present Sixty Years of Progress 1847-1907” that was published in 1907. It features photos of Warrnambool, taken by Edward Vidler in 1907, who matches them with some earlier prints. Vidler had a photographic studio in Liebig Street Warrnambool. Compiled by Edward A. Vidler, Secretary, Warrnambool Chamber of Commerce and Manufacturers, and Warrnambool and District Progress League The front cover of this little but significant book of photographs, advertisements and commentary reads “Warrnambool Past & Present. Sixty Years of Progress – 1847-1907. Illustrated by 100 views of Old and New Warrnambool. Price : One Shilling.” The title page of the book states “Warrnambool : Past and Present. The Metropolis of the Western District. Compiled from contemporary records by Edward A. Vidler, Secretary, Warrnambool Chamber of Commerce and Manufacturers, and Warrnambool and District Progress League. Illustrated. Printed by The Thompson Printing Co., Koroit Street Warrnambool.” In 1984 a facsimile reproduction of Vidler's publication was printed by the 'Osburne Group'. (The Group was named after Richard Osburne who owned the first newspaper in Warrnambool, called The Examiner. The donor of this book was another member of the three people who formed the Osburne Group). This newer book is an A4 portrait style format with Vidler's publication on the top of each page, and a matching 1984 photograph with contemporary comments on the lower half of the page. This book is significant record of the development and changes of Warrnambool therough the years since it was first settled to more recent times.Warrnambool Past & Present. Compiled by Edward D. Vidler. Sixty Years of Progress 1847-1907. Cream, soft cover, A5 landscape orientation, black and white print book, apart from front cover's title, which is red print. Printed by The Thompson Printing Co. Koroit Street, Warrnambool. Original 1907 publication. Includes photographs, advertisements and commentary on Warrnambool and the Western District of Victoria. Price was One Shilling. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, warrnambool history book, vidler’s warrnambool past & present, warrnambool historical photographs, edward a. vidler, pictorial work of warrnambool

A sailing block is single or multiple pulleys with one or more sheaves that are enclosed in an assembly between cheeks or chocks. In use, a block is fixed to the end of a line, to a spar, or a surface. A rope line is reeved through the sheaves, and maybe through one or more matching blocks at the far end, to make up what's known as a tackle. The purchase of a tackle refers to its mechanical advantage. In general, the more sheaves in the blocks that make up a tackle, the higher its mechanical advantage. The matter is slightly complicated by the fact that every tackle has a working end where the final run of rope leaves the last sheave. More mechanical advantage can be obtained if this end is attached to the moving load rather than the fixed end of the tackle. Various types of blocks are used in sailing. Some blocks are used to increase mechanical advantage and others are used simply to change the direction of a line. A ratchet block turns freely when a line is pulled in one direction but does not turn the other direction, although the line may slip past the sheave. This kind of block makes a loaded line easier to hold by hand, and is sometimes used on smaller boats for lines like main and jib sheets that are frequently adjusted. A single, large, sail-powered warship in the mid-19th century required more than 1,400 blocks of various kinds and sizes. An item from an old sailing vessel from the late 19th to early 20th century, unfortunately, the item cannot be identified as to what vessel it belonged to. It does however give an insight into a piece of sailing equipment that's design is still in use today on pleasure sailing craft. Wooden closed spelter double rope block with two pully's between sheaves, block has metal frame around outside of the sheaves and 4 metal pins, 2 each side of the frame at top and 2 at bottom, joining the sheaves together. The shaft between the sheaves is also wooden. Remnants of orange and black paint on outside of block. Shafts are chipped, wood has borer holes. (NOTE: Block was rediscovered after relocating objects to new storage area)Noneflagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, sailing ship, pulley, block, sheave, ship equipment, rope block, sail rigging

Staffordshire dog figurines are matching pairs of pottery spaniel dogs, standing guard, which were habitually placed on mantelpieces in 19th-century homes. Mainly produced by Staffordshire pottery factories, these earthenware figures were also made in other English counties and Scotland. They are also known as hearth spaniels or fireplace dogs as they were positioned on top of the mantelpiece. Many other breeds were produced, particularly the greyhound, though the spaniels were especially popular and this is attributed to royalty favouring the King Charles Spaniel breed. In Scotland, they have colloquially been termed 'Wally dugs.' and were manufactured in bulk at potteries in places such as Pollokshaws in Glasgow and Portobello near Edinburgh. Though the most popular, the dogs were only one of many types of Staffordshire figures; other animals and human figures of various kinds were also popular. Staffordshire dogs are nowadays collectors’ items and since the 1720s, spaniels had been produced by various pottery factories in Staffordshire. The quality of the modelling and painting of the Staffordshire dogs may differ from factory to factory. As the popularity of the figurines increased towards the end of the 19th century, the quality began to decline. Thousands were manufactured but originals in good condition and their correct pairs are now uncommon. These figures continued to be made until the 1920s and early models are of better quality. However, reproductions were still being manufactured in 2009.Early 19th century pair of Staffordshire dogs used as a mantle place display however given their damaged condition and being of a later provenance have little historic or monetary value. Ceramic white dog, figurine one of a pair, with painted face and collar. Both are nearly identical except one sits to the left while the other sits to the right.Noneflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ornament, ceramic ornament, dog ornament

Dressing tables (also known as Vanity Tables in the U.S.A.) have been around since the beginning of the seventeenth century, however it wasn't until the early to mid 20th century that they began to be found in the homes of the middle class and they were often a matching part of a bedroom suite. Dressing tables often featured a variety of objects such as combs, brushes, hand mirrors, perfume bottles, cosmetics, nail buffers, ring holders, jewellery and trinket boxes and trays. The origins of this tray are unknown however its design is reminiscent of trays (and Dressing Table Sets) produced by two English firms in the mid 20th century - "Delina" and "Regent of London". A paper (written by the Warwickshire Industrial Archeology Society) notes that the products items produced by "Regent of London" in the 1940's "satisfied a demand for previously unattainable items, offered to the general public aching for change after wartime privations, post war austerity and years of having to 'make do and mend'." This tray is composed of several decorative elements and materials. The metal border is gilt brass with two filigree bow handles, the main part of the tray is two pieces of circular glass and the encased doily is a mix of embroidered net and petit point. It was suggested in the paper written by the Warwickshire Industrial Archeological Society that the different pieces would have probably been produced elsewhere and brought to the factory to be assembled into the finished product. This vanity or dressing table tray is significant as it is a rare example of an accessory available to and used by women in the mid 20th century. It is also significant as an example of an everyday household item which would have been a valued possession and was made in a style that reflected the importance placed on it to be decorative as well as functional.Round footed dressing table tray with a gilt brass border, filigree bow handles and an embroidered net and petit point doily encased in glass. The gilt border is decorated with a stylized leaf design on the side and a floral design on the top. The petit point embroidery in the center is of five flowers in pink, mauve and yellow surrounded by buds and leaves.vanity tray, dressing table tray, glass tray, gilt brass, petit point, embroidery, net embroidery, doily, filigree, brass tray, flagstaff hill maritime village, shipwreck coast, flagstaff hill, warrnambool, flagstaff hill museum and village, domestic object, dressing table

A sailing block is single or multiple pulleys with one or more sheaves that are enclosed in an assembly between cheeks or chocks. In use, a block is fixed to the end of a line, to a spar, or a surface. A rope line is reeved through the sheaves, and maybe through one or more matching blocks at the far end, to make up what's known as a tackle. The purchase of a tackle refers to its mechanical advantage. In general, the more sheaves in the blocks that make up a tackle, the higher its mechanical advantage. The matter is slightly complicated by the fact that every tackle has a working end where the final run of rope leaves the last sheave. More mechanical advantage can be obtained if this end is attached to the moving load rather than the fixed end of the tackle. Various types of blocks are used in sailing. Some blocks are used to increase mechanical advantage and others are used simply to change the direction of a line. A ratchet block turns freely when a line is pulled in one direction but does not turn in the other direction, although the line may slip past the sheave. This kind of block makes a loaded line easier to hold by hand and is sometimes used on smaller boats for lines like main and jib sheets that are frequently adjusted. A single, large, sail-powered warship in the mid-19th century required more than 1,400 blocks of various kinds and sizes.A historic item from an old sailing vessel from the late 19th to early 20th century, unfortunately. It represents part of the rigging required to set the sails on a wind-powered vessel.A two sheave wood sailing block with metal hook and becket. One sheave missing. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, block, sailing block, two-sheave block, 2 sheave wood block, marine technology, sailing equipment, rigging, rigging block

In 1895 artist Gordon Coutts was commissioned by Elizabeth Harding (Mrs. Silas Harding), a wealthy pastoralist, to paint this portrait of Prince Albert. The portrait was completed by 1896 and is a copy of an original by German artist Franz Xaver Winterhalter (1805-1873). In 1843 Winterhalter was commissioned to paint matching portraits of Queen Victoria and Albert, the Prince Consort. These originals hang in the Garter Throne Room at Windsor Castle and are part of the UK Royal Collection. Queen Victoria’s appreciation of Winterhalter began after she saw portraits by him of other European monarchs. Accordingly, between 1842 and 1861 he made fifteen visits to England and painted over 100 portraits of Her Majesty, the royal family and other friends and dignitaries. There are a number of notable differences in the original Winterhalter work and this painting. The local artist Coutts has changed the colour of the Prince’s cloak from deep blue/black to red (perhaps as a result of working from a black and white photograph). Other differences include extra satin shoulder ribbons, a simplification of the furnishings, notably the floor, and an inexact representation of the medallions worn; collars of the Order of the Garter, Bath, and the Golden Fleece. The painting is framed to match the official copy portrait of Queen Victoria, with the coat of arms of Prince Albert of Saxe-Coburg and Gotha, fixed atop the frame in place of the royal crown.Framed portrait, oil on cotton, of Prince Albert. The Prince Consort wears the robes of the Order of the Garter, holds a Field-Marshal’s baton, and is posed in front of a curtain and colonnade. Timber frame with a layer of gesso and decorative composition ornaments. There are rose, scotch thistle, clover leaf and Acanthus ornaments. The coat of arms that sits on top of the frame is a combination of carved timber and composition elements.Signed lower right corner in red brushpoint: ‘after Winterhalter / By Gordon Coutts / 1896’.albert, prince consort of victoria, queen of great britain, 1819-1861, winterhalter, franz xaver, 1805-1873, coutts, gordon (1865-1938)

This cream and green patterned vest is said to have been made for William Herbert Teal as part of his "trouseau" on the occasion of his marriage to Daisy Edith Davis on April 14th 1916 at St. Peter's Church, Merino, Victoria, Australia. It is a handmade waistcoat but it is not known who made it. William Teal was born in 1889 to Elijah Teal and Isabella Campbell Reid in Camperdown, Victoria and after marrying, William and Daisy also lived (and worked as farmers) in the Camperdown area. They had seven children. Daisy died in 1962 and William died in 1975. A wedding portrait of William and Daisy shows William wearing a dark suit consisting of a single breasted coat, trousers, good shoes, gloves and a shirt with a stiff, high collar, however if he is wearing this vest, it is unfortunately hidden under his coat. Although by 1916, men's "ready to wear" clothing were widely available, this waistcoat was handmade (possibly by his mother or sister or future wife) and has been preserved by his family for almost one hundred years. Men's suits in the early part of the twentieth century were predomininantly three piece, consisting of a jacket, vest ( or waistcoat) and trousers made from matching fabrics. On special occasions (such as a marriage) the groom might also wear gloves and have a flower in his buttonhole. Some men liked to wear a watch attached to their waistcoat with a fob chain.This item is of significance as a rare example of a man's vest that was made for a special occasion (William Teal's marriage in 1916) and preserved by his family for several generations.Man's handmade vest with a green and cream patterned brocade front, trimmed with green cord around the edges and featuring four inset pockets (also trimmed with the green cord). It has six buttonholes down the left front edge (plus a hand embroidered buttonhole to hold a fob chain) and six corresponding holes for shank buttons (which are missing) down the right front edge. The back and lining are made from cream cotton fabric. The back has a centre seam and a strap with a metal buckle with prongs (to allow for adjusting the length). The cream lining and back display some discolouration and brown marks.flagstaff hill maritime museum and village, great ocean road, warrnambool, camperdown, merino, teal family, william herbert teal, daisy teal, daisy davis, waistcoat, man's waistcoat, vest, wedding, handmade vest, wedding clothes

Sheer bri-nylon, over a heavier weight bri-nylon lining. Sleeveless and with a scoop neckline. A braid of padded flowers and leaves outlines the neckline and forms the straps that pass over the shoulders. This braid also forms a “yoke” from which the main body of the nightgown falls in soft gathers. Outer bri-nylon layer is edged with a one cm wide lace edging. Price on swing tag: 65 shillings. Negligee with double layer of soft pink bri-nylon. Scooped neckline with a 6cm wide yoke. Yoke has a braid of padded flowers and leaves that outlines the neckline that is appliquéd as is the matching nightgown. Two pearl buttons fasten the yoke at the centre front. Full length front opening. Double layer short “puff” sleeves are gathered at the shoulder and have an elastic casing at lower edge. Outer layer of sleeve is longer than lining, giving a soft “puff” effect. Hemline has a stitched “shell” finish.Hanro SW (Small Women’s) 100% bri-nylon On swing tag: Created by Hanro, Quality lingerie. Swiss Inspired.costume, female underwear, nightgown