This paper roll holder would have been used in a retail premises. Large brown paper rolls were able to be cut to any length for wrapping goods.Two wooden bevelled pieces, narrow piece on top wider piece on bottom with steel support ends and moveable centre piece screwed to wood pieces. Steel ends have "U" shaped holder in inside at centre.Steel ends have two raised diamond patterns. "24in CLARENCE 24in"shops, george evans collection

P. S. PEVENSEY: Dimensions: 111ft 5 ins X 23 ft X 6ft 8 ins. Tonnage:130 tons Built: 1910 at Moama, N. S. W. References : Book: Murray river Paddle Steamers by D. Wardle Permewan , Wright & Co. : pp. 72, 129, 157 The P. S. PEVENSEY holds historical and social significance for the Port of Echuca, being the cornerstone of their paddlesteamer fleet. The PEVENSEY was renamed for the TV series All the Rivers Run, to P. S. Philadelphia , playing a staring role in the program, which has resulted in the PEVENSEY becoming a tourist attraction and has increased tourism to the Port of Echuca. The PEVENSEY was originally designed for use on the Murrumbidgee river, named after Pevensey station on that river. It was then owned by Permewan Wright & co operating out of Echuca for many years. She returned to Echuca in 1975 to begin another life as part of the Port of Echuca tourism operation.Colour photograph of the P. S. Pevensey, in side view, moving through the water. There are people, 2 on the bow and 3 on the stern of the boat as it steams along the river. In the background is the river bank and the bush landscape.On the front:PEVENSEY on the wheelhouse of the boat. Printed on reverse: This paper manufactured by Kodak: Print made by Kodak: KODAK: OCT.78-Mriverboats, p.s.pevensey, echuca, port of, paddle steamers

The PS Success was built in Moama in June 1977 by GB Air for Westwood & Air. It was built to tow barges of cargo along the Darling and Murray rivers, as well as running as a passenger boat from Swan Hill to Mildura during 1915-16. The Success was the last paddlesteamer actively working on the river when she performed several rescue voyages to flood bound properties along on the Darling River, rescuing sheep and a large cargo of wool. The vessel ended her working life in 1957 and was put up on the bank at Ned's corner, 80km west of Mildura. In 1996, the Pollard family donated the vessel to the Riverboat Historical and Preservation Society of Mildura with plans to restore her to her former glory. This project became increasingly difficult for the dedicated volunteers to handle and the Port of Echuca took ownership in 2009 in the hopes that further restoration work can be done at the Port. The Succes is currently on static display at the northern end of the Port of Echuca. The PS Success had a long, colourful history towing barges on the Murray River and in particular in the Mildura, Wentworth and Ned's Corner regions. She was the last paddlesteamer to be working on the river system right up until the 1956 floods towing the barge Vega, where at one point both boat and barge smashed into trees on a wild, uncontrolled journey downstream where she was damaged and later lay stranded on Ned's Corner.Composite timber hull, 3-inch red gum planks on angle iron frames. Carvel built with counter stern and straight stem. Originally had a round keel and a pair of 35hp engines. Success paddle steamers, echuca boat builders, westwood & air, p.s. success

Possibly a gift presented to the university from International Students/University - Corporate GiftGreen jade boat with three masts. Bow has dragons head and stern the tail. Placed on green jade sphere which in turn on square base. Sails have carved symbols on themjade, carved, boat, dragon, gift

Red Ensign used by Australian Registered Merchant ships and is a red version of the Australian Flag. Uusually placed on the ships stern.Large red ensign used by Australian ships. Similar to Australian flag except predominantly red in colour with the Southern Cross stars in white and the red, blue and white British emblem in top left corner. White edging on left side through which rope is threaded.red ensign, flag, navy

This was the uniform of junior girls from the 1960s until the new campus for secondary students began at Truganina in 1978. Shortly after the opening of the secondary campus a new dress, green in colour, was adopted for all girls. This summer uniform dress, donated by a past parent, was handmade and worn by a prep student in 1977. It is a rare example of the school dress from this period. Together with a dress pattern and a sample of the same fabric donated by another past parent, these items have historic significance and interpretive capacity. Current students enjoy learning about how different the provision of school uniforms was not so long ago, as Westbourne uniforms can now be ordered online.Small belted dress in blue checked pattern with white collar and sleeve cuffs and three white buttons down the front.

Wandin Thomas Sebire JP (1867-1960) learnt boot-making as a young man. In a small workshop on his property in Sebire Avenue, Wandin he made boots for family, friends & neighbours. He also repaired boots & made other small leather articles. Bootmaking is a complex process requiring a variety of tools. The leather is cut to shape, glazed & burnished (polished) with heated irons. The pieces are stretched onto, & nailed to, a wooden last to form the boot. Once attached to the insole, the boot is finished on a metal last. Uppers are stitched with waxed thread through holes made with an awl. Heels comprise pieces nailed together & neatened with a heel shave. Metal plates, short nails or hob nails driven into the sole & heel, often in a pattern, improved durability.2 pairs of handmade, adult brown leather boots, with decorative stitching, eyelets and stitched with waxed thread. Soles covered with hob nails in a decorative pattern. 1 handmade child's brown leather boot, with decorative stitching, metal eyelets, heel has patterned nails.bootlaces, boots

A garment construction pattern entitled: '1898 TENNIS GOWN' from the pattern series 'AGELESS PATTERNS: VINTAGE PATTERNS FOR THEATRICAL COSTUMES'. Materials: Paper, Inktennis

Historically(1920 to 1927), this ledger not only details the legible hand writing of this era but also the day to day commercial activity in the Kiewa Valley region. The neatness and the diligence of those who were required to pen the information into this ledger was a requirement by all who were involved in commercial trade be it in the city or in the rural area. Emphasis on neatness was ingrained in students at a young age. This era was well before general commercial stock computer based inventories. Generally all students of commerce required an accuracy in writing and arithmetic. Neatness and order were a "selection criteria" requirementThis item clearly identifies the Kiewa Valley as having a substantial financial hub to accommodate the various commercial enterprises within a rural environment Circa 1880's. Although Kiewa Valley had mining, agriculture, cattle and sheep it was also composed of a mixed society, encompassing all levels of society at that period. It identifies some the commercial activities(newsagency) undertaken by specific families farming in the Kiewa Valley and relates their history in the period of 1920 to 1927This ledger has a very thick cover of strong compressed cardboard. It has a cloth covering (Glued on) and is a faded blue colour. The corners of the opening side of the cover are reinforced by suede cloth,in a triangular shape, and enclose both the front and inside portions of the the ledger. The spin is reinforced by a suede section to provide increased strength and protection. The inside cover (both front and back) has an orange and brown bubbles and specks pattern. The grammage of the lined sheets (blue) is approximately 120g/m. The first twelve pages are indented and alphabetically marked with alternating red and black letters (two letters per page except for the last page which has three letters). The remaining pages are numbered in black print at the top outside edge of each page. There are 742 page numbers. Each page has thirty two blue horizontal lines and one double red line (second from top) Each page has thirteen vertical lines starting from the top horizontal double red lines and ending at the bottom of the page. These lines segregate the page into blocks for the date, the transaction and financial input. There are three double vertical red lines which designate the amount of money of each transaction (in pounds shillings,and pence).Located on the top section of the spin (in gold print on red background) "LEDGER" This is framed within a golden printed pattern of straight and squiggly lines.ledger, book keeping, 1920s commercial transactions, local kiewa valley commercial history

This hat is part of a General Purpose Uniform issued by the Australian Airforce to Bernard Farley during service. This uniform type was developed in 2014 and replaced camouflage as the uniform worn during general base duties and in non-warlike environments. Although a camouflage pattern, this design is not intended for use as camouflage. This item has social significance, as an item of uniform worn by Warrnambool RSL community member and Secretary (2019), Bernard Farley during service with the Australian Airforce. The item is a representative example of current Airforce General Purpose Uniform and is in excellent condition. As a set, the uniform has aesthetic significance in it’s design, incorporating GPU uniform design from the Army alongside the colours and motifs of the Australian Airforce. General Purpose Uniform (GPU) hat in Airforce colours of blue and grey in camouflage pattern. Broad brim hat with black plastic cord end fastener on a blue cotton cord. Plastic tag on interior of hat lining with printed inscriptions.Inscription on tag: “Hard Yakka/AUSTRALIA/AUGUST 2015/PO No: CC2XZ8/LAY No: 10609/SQNCOR FARLEY/(broad arrow)/[Mobile Phone Number]/NSN: 8415-66-161-4051/SIZE: M 56cm/NAME:” Inscription on reverse of tag: “PM KEYS No:/75% COTTON/25% POLYESTER/CARE INSTRUCTIONS/HAND WASH IN COLD/WATER WITH MILD/DETERGENT RISE/WELL DO NOT WRING/TUMBLE DRY OR/DRYCLEAN (X)/DRIP DRY IN SHADE”camouflage, airforce, uniform, general purpose uniform, australian defence force

Serving member of RAN - superseded pattern.1. Jacket - Disruptive Pattern Navy Uniform, long sleeves. Two breast pockets with flaps held shut with Velcro shoulder epaulettes with attached rank badges for Leading Seaman. Shoulder flash is White Ensign held with Velcro. Above pockets is an oval RAN badge. Front placket opening with 6 metal buttons. Both sleeves have a reflective band. Left front has a Velcro patch for name tag. 2. Trousers - DPNU - Two open hip pockets. Two leg pockets with zip closure. One back pocket with button close. Metal zip fly. Velcro on leg hems to draw tight.1. White tag on inside back below collar - ADA - top illegible. Name. Fibre content 75% cotton/25% polyester. Flame resistant/ WASH BEFORE USE/ Hot machine wash. May be tumble dried hot/ Warm iron, Do Not Bleach. Do Not Soak/ Dry Cleanable. 2. White tag illegible. Black texta name written - IBBOTSON 2 EA 1.uniform, work dress, ran/dpnu

Diana Jones (1939-2009) was President of the Association for the Blind from 1985 until 1992. In her 8 years as President a great deal was accomplished. New centres were opened or extended throughout Victoria and the Metropolitan area, volunteer services expanded and the Vision Resource Centre at Kooyong was built into which 3RPH radio was relocated. A Vision Information hotline, audiology services and the National Centre for Ageing and Sensory Loss were established, the Braille and Talking Book libraries was incorporated into the Association and the Charlie Bradley Cricket Pavilion opened at Kooyong. In 1990 Diana Jones became a member of the first Board of Directors of the newly incorporated Association for the Blind Ltd which ushered in a new era, requiring strict observance of financial and accounting methods in order to ensure continued Government funding. Mrs Jones was highly regarded by clients, volunteers and staff as a capable hard-working leader. Her services to the Association and over many years to the wider community, were recognised in her appointment as a Member of the Order of Australia in the 1993 Queen's Birthday Honours. In this image she stands inside, wearing a knit jumper with bow ties and a patterned blouse with tied neckline.Diana Jones wearing a knit jumper with bows, and patterned blouse with tied necklineGeneral Committee President Diana Jones 1404.5diana jones, association for the blind

Built Williamstown 1938, taken over by Navy 1942, renamed 'Stella'?Black and white photograph showing fishing boat Warreen, CSIRO research ship. Lifeboat across stern, six or seven men onboard. Dark coloured hull, white cabin. Lakes Entrance Victoriafishing industry, boats and boating

World war 1 eraWorld war 1 eraWorld War 1 stitched brown leather field binoculars case with lid. The case has two belt loops attached to the rear with light brown coloured stitching and copper rivets. The case has a long thin leather and small steel buckle adjustable shoulder strap. The shoulder strap is attached to the case by short leather straps, stitched and riveted to the sides and bottom of the case. The lid pivots open to the rear, attached to the case by a leather strap which is stitched and riveted to the case and lid. The lid is secured closed by a short leather strap and brass buckle. The top of the lid has a thin leather carrying handle attached by rivets. The top of the lid has the maker's name and case pattern stamped on the top. Stamped on the lower front is the broad arrow mark.1917 G. Battle & Co H X The top of the lid has the numbers 709 and 49867 written in pencil. The lower front of the case has the broad arrow pattern.binoculars, case, leather, world war 1, military

Isabella Mary Beeton (née Mayson; 14 March 1836 – 6 February 1865), also known as Mrs Beeton, was an English journalist, editor and writer.In the 19th century, the craft of embroidery became a pastime for women. Needlework creations were crafted to be displayed in the home.This book is an example of a popular book of ithat time.A hard back book with a dark green fabric cover. The title is in gold print -"Beeton's Book of Needlework" inside an ornate gold border. It contains descriptions and instructions for tatting patterns, crochet patterns, knitting patterns, netting patterns, embroidery patterns and point lace patterns. There are six hundred illustrations / engravings. some of the patterns are fold-out.inside cover - "Special first prize to Catherine J. Horne by Mrs William for Needlework" Tarang State Schoolbeeton-isabella needlework-knitting-lacework

This nut roll tin was used in a period before 1959(when plastic containers started being used). It was a period when "home" cooking(desserts and cakes) was the only method of having cakes and other pastry dishes in rural areas as there were no local shops. The utensils available for this home cooking had to be strong and reliable and low maintenance. This was a period of self sufficiency especially in semi remote rural areas. Sadly, the Willow Company no longer has a nut loaf tin among their many cooking tins. A cylindrical nut loaf tin with removable lids at each end. The metal body of the tin has tiny patterned indented squares with only two of the three clips to ensure the tin stays closed. The lids at each end add to this tightening. On the lids there is rusty difficult to read stamping for the Willow brand. The cooked cake can be easily removed when the two lids are taken off. This is a rare tin.Around the edges of each lid is stamped 'NUT LOAF TIN'. In the middle of each lid is a circular shape with 'Made in Australia' around the edge. Inside this is a diamond shape with 'WILLOW'. There is a tiny square shaped pattern indented all over the body of the tin.baking tins, kitchenware, baking, cooking

One of a collection of fourteen items of protective wear and household textiles donated by Lisa Sylvan, a long-term resident of Kew, Five of the items are homemade aprons made and worn by her mother. Of the seven pinafores, three identical but differently sized pinafores were made in her parents' factory, while the other three are handmade. The handmade aprons and pinafores are representative samples of women's work, possibly from published patterns, using fabrics originally deigned for dresses. Typically, contrasting fabrics and colours were selected to provide visual interest. The donation also includes a hand embroidered linen supper cloth and a commercially produced 'birds of Australia' printed table cloth. Most of the collection derives from the 1950s.Although not uncommon, hand-made protective clothing in the form of aprons and pinafores often represents samples and styles of 'women's work' using remnant fabrics often designed for other purposes. While generally utilitarian, women found means of gracing these items by the use brightly coloured fabric or patterns, the positioning of pockets and the use of contrasting fabrics to provide visual interest.Handmade apron created out of a blue and white dress fabric that has a pattern of leaves. The apron is highlighted with red braid.aprons, protective clothing, handmade clothing, costume accessories, lisa sylvan, fashion design, women's clothing -- 1950s, fashion 1950s

Page turners were used in churches and synagogues to read Holy books, to turn pages in huge manuscripts and books (and later newspapers) as well as open double pages without a sharp knife (letter openers). This was from the home of W.J. Sebire in Wandin.A highly polished cream coloured long vintage celluloid page turner used for reading. It has a curved round ended long smooth blade which is paler than the darker short round pointed handle. Both sections have small dark brown fine floral designs on one side. There is a 3mm crack all round near where the handle meets the blade. On one side only are small dark brown floral patterns on the handle and one on the blade.page turners, holy books, celluloid

Used in the 19th century.A forged steel long narrow sharp bladed felling axe head without a handle - it has a hole for the handle. It was commonly used to chop down trees as it has a more elongated and rigid blade excellent for deep gouging cuts.The length of the handle, weight of the head and angle of the blade all play a role in just how deep it cuts. It was use din the 19th Century.There is a small grooved pattern on the head where the handle would attach. A circular indentation is evident.woodworking tools, steel, froes, cleaving axes, axes, cutting tools, hand axes, felling axes, axe heads, tool components,

British pattern steel army helmet as used in both WW1 and WW2. This example dates from the WW2 era.British pattern steel helmet, dark olive in colour. Outside of the helmet is covered in dark olive green mesh which is secured with olive green cotton cord. A bolt head is prominent on the crown of the helmet and corresponds to a nut and thread on the inside. This nut and bolt secures a black rubber pad. A sweat band in black synthetic material is secured to the inside rim of the helmet. An adjustable webbing chin strap with brass buckle is attached with clips to each side.Niluniform - army, costume - male, protective headgear

The fabric of this child's dress includes 'Broderie Anglaise, a form of needlework involving patterns of holes that are each stitched to form a finish that will not fray. The dress features a homemade button.. This handcraft dates back to the 1500s. It became popular in the 1800s and early 1900s, particularly for women's nightwear and underclothing.This child's dress has handcraft and needlework skills that were popular in the 19th and early 20th centuries. The dress also features a homemade button.Child's dress, white fabric, with short sleeves, gathered waist and scalloped hemline. The bodice and shirt have Broderie Anglaise embroidery inserts, with the holes formed into a star pattern. The bodice insert is a 'V' shape. The back has a ribbon tie and is finished with a homemade button.flagstaff hill, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, child's dress, clothing, embroidery, broderie anglaise, handmade button, handmade dress, child's fashion, dressmaker, handcraft, needlework, lacework

Ship model Skylark. 2 masted sailing ship, hill painted, black strip on white. Separate wooden life boat. "Skylark" on each side of bow and across stern. Rudder pivots. On timber stand. Name "SKYLARK" on both sides of bow. "SKYLARK HULL" across bowflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Original Ships History: Aréthuse was a French frigate, launched in 1757 during the Seven Years War between England and France. She was captured by the Royal Navy in 1759 and became the fifth-rate HMS Arethusa. She remained in Royal Navy service for twenty years until she was wrecked after being badly damaged in battle. The ship was constructed at Le Havre for privateer warfare as ”Pélerine” and soon after her launch, she was purchased by King Louis XV (1710-1774) and commissioned as Aréthuse on 21 January 1758. In June, under captain Vauquelin, she sailed through the British blockade of Louisbourg helping to defend the site before departing, again forcing the blockade. On 18 May 1759, she was in transit from Rochefort to Brest, under the command of Louis-Philippe de Rigaud, Marquis of Vaudreuil, when she was intercepted near Audierne Bay (Baie d'Audierne) by three Royal Navy ships the Thames, Venus and Chatham. She attempted to escape but after two hours, lost her topmasts and was overtaken by her pursuers. Thames and Venus engaged her with heavy fire, causing 60 casualties before the vessel surrendered. She entered service with the Royal Navy for the rest of the war, and was in service in British home waters and became responsible for the capture of several French privateer cutters. In 1777, a Scotsman James Aitken, widely known as John the Painter, was hanged from her mizzenmast for burning the Rope House at Portsmouth Royal Dockyard on 7 December 1776, to aid the struggle of American independence. The mast was struck from the ship and re-erected at the dockyard entrance so as many people as possible could watch the execution. On 17 June 1778, she fought a famous duel against the French 36-gun frigate, Belle Poule. Belle Poule was on a reconnaissance mission, along with the 26-gun Licorne, the corvette Hirondelle and the smaller Coureur when she encountered a large British squadron that included Arethusa at a point 37 km south of The Lizard. Admiral Keppel, commanding the British fleet ordered that the French ships be pursued. The captain of Belle Poule refused the order to sail back to the British fleet. The British fired a warning shot across his ship's bow, to which he responded with a full broadside. This action began a furious, two-hour battle between the two ships that resulted in the deaths of the French second captain and 30 of the crew. However, Arethusa was crippled by the loss of a mast and withdrew, allowing Belle Poule to escape. This battle was the first between British and French naval forces during the American Revolutionary War and took place around three weeks before France had made a formal declaration of war. The battle was widely celebrated in France as a victory, even inspiring a hair-style in court circles that included a model of Belle Poule. It was also viewed as a victory in Britain and became the subject of a traditional Sea shanty, The Saucy Arethusa. On 18 March 1779, under captain Charles Holmes Everitt, Arethusa engaged the French Aigrette, under Lieutenant Mortemart, sustaining considerable damage in the fight. Arethusa was wrecked the next day off Ushant, It was the fame of this Arethusa which induced the Royal Navy, during the following two centuries, to bestow the name on a further seven consecutive individual ships and two consecutive classes of cruisers. (See Provenance Sec this document for information on the makers of this model). Model ship of the 3 masted frigate the “Arethusa”, model is painted black and white with varnished deck and masts. A British flag is flown at the stern. The ship is displayed in a glass case with timber frame and 4 legged stand.Label at bottom of glass case, printed in black script on a gold strip “Model of the “Arethusa" "A famous frigate, taken from the French by the British, on the 18th of May 1759 and lost on the French coast in 1779. – Made and presented by G. Lance & P. Diggins, October 1894” flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, arethusa ship model, george lance, peter diggins, len asling, warrnambool art gallery, warrnambool exhibition, message in a bottle

Black and white photograph showing an inlet of Agnes Bay, with steep scrub lined bank on opposite shore and a Lake Tyers Aboriginal seated at the stern of a rowing boat facing into foreground shore. Lake Tyers Victoriaaboriginals, waterways, boats and boating, vegetation

The Boyds purchased their record player and sound system from Thomas’s in Melbourne. Patricia Boyd (later Davies) was very interested in opera and was later appointed to the Board of the Australian Opera.Songs by Tom Lehrer. LP 33RPM vinyl, Catalogue Number: KL 1653, Record cover, no sleeve, 1 vinyl disk. Cover notes, no author listed. Cover design: Janine Sterner. Tom Lehrer.lp, sound recording

Crochet covers for milk jugs, teacups and bowls were produced to repel the dreaded Australian blow fly. They were typically decorated with Australian flora and fauna and commemorative motifs and sometimes edged with beads, shells and other three dimensional forms, not only for appearance, but also to weigh down the crochet so it would stay safely in place on the jug. The three dimensional parts were stiffened with sugar syrup, or sometimes starch, paraffin or gelatine. The main sources for crochet cover and other needlework designs available to women were in journals, magazines and pattern books. In the first half of the 20th century women's focus was the home and its decoration was important. Embroidery and crochet work was an affordable way to personalise and add aesthetic value, and examples of embroidered and crocheted pieces could be found in most Australian homes, decorating or protecting furniture, floors and walls, and keeping off flies and insects from food. Small square milk jug cover that has been hand crocheted with crown, flag and date patterned into centre. It has a red, white and blue beaded fringe.cover milk-jug-cover handcraft tableware

It is made up of andalusite. Andalusite is a rock-forming mineral, sometimes found in granite or schist. It is often used to make glass, ceramic products, chemicals, and heat-resistant bricks as it can withstand high temperatures without changing. The chiastolite contains particles of graphite, which arranges in geometric patterns. When crystal growth occurs in the rock, the granite particles concentrate at crystal interfaces and can result in cross shapes. These ‘cross stones’ have been valued and used for their spiritual or religious meaning and used as charms, gems, or amulets. Chiastolite was first discovered in 1754, seen in a description in a published book by a palaeontologist, Franciscan priest, and Spanish author, Jose Torrubia. Deposits have been found in Australia, France, the USA, Chile, Canada, Spain, Brazil, Sri Lanka, and Russia. Deposits have been found in Western Australia and South Australia. This particular specimen was found in Bimbowrie, South Australia. Other chiastolite specimens have been found in Bimbowrie, along with jasper, quartz, and aventurine in the form of rolled pebbles or schist. This chiastolite specimen is socially and historically significant. It is a very rare sort of andalusite mineral. It is from one of only two locations where it is regularly found in Australia. The carbon cross has made it an important religious symbol in the past. Its ability to withstand high temperatures has made it a common ingredient in heat-resistant bricks and ceramics today. This specimen is part of a larger collection of geological and mineral specimens collected from around Australia (and some parts of the world) and donated to the Burke Museum between 1868-1880. A large percentage of these specimens were collected in Victoria as part of the Geological Survey of Victoria that begun in 1852 (in response to the Gold Rush) to study and map the geology of Victoria. Collecting geological specimens was an important part of mapping and understanding the scientific makeup of the earth. Many of these specimens were sent to research and collecting organisations across Australia, including the Burke Museum, to educate and encourage further study.A metamorphic mineral consisting of andalusite, with a cross shaped graphite pattern in colours of grey, brown and yellowburke museum, beechworth, geological, geological specimen, andalusite, chiastolite, geometric, cross stone, spiritual, religious, australia, south australia, bimbowrie, quartz, jasper, aventurine, schist

- Domestic dressmaking - Girls' fashionC 1950 Butterick paper pattern No, 8251 Size 8 - Girls nightdress & pyjamas pattern - Pattern with 4 choices to make - Pattern sized to "Brest 26 inches, size 8"Butterick - Designed in New Yorkdressmaking, home, children's fashion

The wooden pattern forms part of a larger collection; some of them were secured within a durable wooden crate. The cast pattern was an essential tool at Briggs Brass Foundry, specifically designed for creating sand casts. Sand casting is a time-honoured technique, with a history exceeding 2,000 years. The handcrafted nature of this process produces brass and copper alloy items particularly suitable for maritime applications. Typical products include bells, boat hooks, cowls, propellers, handles, lids, rowlocks, hooks, letters, bolts, rail holders, brackets, deck plates, flanges, rudder guides, portholes and covers. The distinctive bronze mixture used at Briggs’ Foundry is copper based. It is composed of local ingots of copper, tin, zinc and lead, blended in precisely measured quantities. The resulting alloy is non-ferrous, known for its exceptional durability and longevity. HISTORY OF BRIGGS MARINE: The Briggs Brass Foundry, trading as Briggs & Son Foundry, was established in 1912 by Herbert Harrison Briggs (1863-1931) with his son George Edward Briggs. In 1922, the youngest son, Cyril Falkiner McKinnon Briggs, joined the foundry. After Herbert died in 1931, his sons George and Cyril ran the foundry. The business became known as Briggs Marine Foundry, the “non-ferrous founders” and “bell specialists”. The foundry products were made using the traditional sand-casting method, which is now over two thousand years old and is becoming a dying art. The foundry operated at 70 Wellington St, Collingwood, and specialised in casting ship bells and other marine equipment and fittings. It also made decorative items such as miniature ship propellers. The great-granddaughter of Herbert Briggs inherited a Briggs brass bell, similar to one at Flagstaff Hill Maritime Village. In 1965, Cyril was the only remaining family member involved in Briggs Marine Products. The firm relocated to Chesterville Rd, Moorabbin and Cyril went into partnership with Frank Lee. In the same year, the firm exhibited its products at the 1965 Boat Show. When Cyril passed away in 1967, Frank took over the business with two new partners. After Frank Lee died in 1971, the foundry was run by his son and daughter-in-law, Les and Eva Lee. Briggs Marine still exists today, but the Briggs family is no longer involved. Briggs Foundry had a community-minded retail branch in Warrnambool, selling cast boat fittings and equipment to fishermen and others in the regional marine industry. The branch closed in 1972. In Flagstaff Hill’s formative years, 1972-1975, many Briggs Marine brassware products were generously donated from its Melbourne foundry, along with casting patterns, tools, machinery and a cupboard. EXHIBITION and LEGACY: The donated items were displayed in a simulated Brass Foundry within the Village, where visitors could view them and gain insight into the foundering and metalwork trades that supported maritime industries, including shipwrights and boatbuilders. The castings produced at the foundry were also vital for farmers, manufacturers and other local industries. This exhibit was part of a broader showcase of working crafts, trades and services typical of a Maritime town. The display was available to the public from the completion of the building in 1986 until 1994, when the space was repurposed. It is believed that Briggs Marine’s family members gave personal assistance in setting up the displays in the original village shops, particularly the ‘Brass Foundry’ building. A notable feature of the Village Brass Foundry was the historic Cornish chimney, presented as a working model. This chimney visually demonstrated the process of smelting metal in furnaces and pouring it into sand moulds. Constructed from specially curved bricks, the chimney now stands at about two-thirds of its original height, having been relocated from the Grassmere Cheese factory. The hand-cast sand patterns hold considerable significance due to their association with Briggs Brass Founders, a firm established in the early 20th century and widely recognised for its expertise in producing, repairing, and restoring ship bells and marine equipment. Known for their specialisation in non-ferrous metal casting, Briggs Brass Founders supplied high-quality fittings and equipment for maritime use. The company extended its operations by opening a branch in Warrnambool, where it actively supported the local community. The foundry’s ability to cast essential products was important to local and regional industries, like fishing, farming, manufacturing and commercial businesses. Through its presence, its reputation was reinforced as both a skilled manufacturer and a community-minded enterprise. The foundry is notably associated with the Schomberg Bell at Flagstaff Hill, having restored this small, historic bell to its original condition. The Schomberg Bell is a fine example from a luxury migrant vessel dating back to the mid-19th century, reflecting the craftsmanship and heritage preserved by Briggs Brass Foundry. Pattern; an unpainted, rectangular wooden frame with a top and sides, similar to a small rectangular stool. A solid half-cylinder shape was added under the horizontal 'seat' with another smaller half-cylinder attached to it, end-to-end. A string is tied between two metal loops attached to the back. There are two X marks stamped into the back. The pattern is part of a set of foundry patterns from Briggs Brass Foundry.Stamped: "X" "X"flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, briggs' bronze, traditional method, trade, sand cast, cast, brass alloy, copper alloy, pattern, mould, foundry, brass foundry, metal foundry, casting, sand mould, sand casting, marine equipment, marine tools, marine fittings, copper tin zinc lead, non-ferrous, non-corrosive, brassware, metalware, foundering, metalwork, maritime, bell founders, ship chandlers, marine products, biggs, briggs family, herbert harrison briggs, h h briggs, george edward briggs, cyril falkiner mckinnon briggs, cyril briggs, briggs & son brass foundry, h h briggs & sons foundry, briggs marine, alliance casting & engineering solutions, grassmere cheese factory, cornish chimney, curved bricks, collingwood, moorabbin, collingwood foundry, moorabbin foundry, 1912, briggs, briggs brass foundry, briggs marine foundry, briggs marine products, frank lee, les lee, eva lee, briggs marine warrnambool, non-ferrous founders, bell specialists, ship bell specialists, founders, metalworking, traditional sand casting, casting pattern, foundry pattern

One of a series of photographs taken by Michael Ritchie who was enthusiastic deck hand on Wattle. Photographs taken when Wattle was at Rye for the Christmas/New Year period, most likely 1997. Sailing schedule,shows 5 cruises per day, ticket prices, cruise destination of Seal Colony.and tea, coffee & scrolls available. Colour photograph of Wattle moored at Rye Pier, looking to stern. Gangway, lifeboat, signs, Red Ensign visible. Skipper Leigh Doeg selling tickets to 2 parents,2 children on right hand side of photographsteam tug wattle, rye pier, seal colony cruises, leigh doeg, michael ritchie