Corroded nail with rectangular shaft narrowing to a blunt tip. The head is slightly irregular. Horizontal incised lines on shaft below head.archaeology, historic building, former royal mint

This item advertises and describes a power pumping head and other products made by Alderdice Brassfounders of Warrnambool. Brothers William and Charles Downing came from Melbourne to Warrnambool in 1898 and established the Atlas Brassworks. In 1901, with the involvement of John Alderdice, the Downing brothers began the Alderdice Brassfounders Company situated at 64 Henna Street in Warrnambool, the site of an old cordial factory. This business which produces fittings used in farming, factories, public utilities, Government departments etc., still operates at the same address.This item is of considerable interest as an early example of the the business activities of Alderdice Brassfounders Co., a prominent business in Warrnambool for over 120 years.This is a sheet of paper describing a power pumping head one side and other products of the Alderdice Brassfounders Company on the other. It contains black printing and black and white illustrations on both sides of the paper. Three of the illustrated items have been crossed out.warrnambool industries

This tool is one of several tools which are believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute. This tool is of interest as an example of a home-made vintage tool and as a memento of the Warrnambool carpenter and businessman, Henry Phillips. This is a small mallet with a wooden handle and a cylindrical-shaped piece of wood inserted into the handle to form a mallet head. The head section is reinforced with a piece of curved thin metal. The ends of the mallet head are very worn. This is a home-made tool. vintage tools, henry phillips, warrnambool, history of warrnambool

HAND MADE MINERS PICK METAL HEAD - LONG HAMMER HEAD ON ONE END AND PICK HEAD ON THE OTHER END WOODEN HANDLE, THE HANDLE IS SPLIT, HELD TOGETHER WITH LEATHER AND WIRE LEATHER STRIP WOUND AROUND AND NAILED ONpick, miners pick, miners tool, gold

This book, published in England, has been awarded as a school prize in 1887. Woodford School, No. 648, was an early National School which commenced in a house in 1854. In 1872 a sandstone building was erected. The school still operates. James Craig was the Head Master of Woodford School from 1884 to 1889. His wife was the Work Mistress of the school and both were involved in community affairs, particularly in regard to the Presbyterian Church and the local Mechanics’ Institute. Annis Morgan was born at Woodford to Jenkin and Mary Morgan in 1874. She would have been about 13 at the time she received the prize book. Annis (Ann) married Alan Patterson in 1897. This book is of considerable significance as it is connected with the history of Woodford, the Woodford school, the teacher, James Craig, the pupil, Annis Morgan and her family. This is a hard cover book of 812 pages The cover is black with an engraved ornamental pattern and edging and gold printing in the title on the cover and the spine. There is gilt edging on the pages. There is a bookplate on the inside front cover and one or two pages at the beginning are missing. The book contains many black and white illustrations with the first one covered by a piece of tissue (now blotched). The book contains poetry, short stories (some serialized) and some factual writing suitable for older children and adults. The cover is stained and somewhat faded and is ragged at the edges.Bookplate: ‘State School No. 648 Woodford, Fifth Class, presented to Annis Morgan, Christmas 1887, Jas. Craig, Head Teacher’. Stamp inside first page: ‘Warrnambool & District Historical Society WB 196’ history of woodford, woodford state school, annis morgan

This is a photograph of Samuel Smith, aged 92, with his dog outside his home, Gloucester House, near Cann River. He was the keeper at CapeEverard (Point Hicks) for five years.He retired from the lighthouse position in 1904. His life story was written in The Snowy River Mail, Orbost, Wednesday Evening – 27 January 1937 as "LIFE STORY OF SAMUEL SMITH". He was born in Gloucestershire in 1844 and died in 1937 at the the Orbost Hospital. There was an obituary in The Argus (Melbourne) on Saturday 18 February, 1939. Samuel Smith, of Noorinbee, East Gippsland, was the last survivor of the original crew of the frigate Victoria, the first vessel of the old Victorian Navy. When the Victoria arrived in Melbourne in 1861 after having landed soldiers in New Zealand for the Maori War, the crew was given a civil reception, and each member was presented with a sovereign in honor of the birth of the Victorian Navy. A black / white photograph of a bearded elderly man sitting and holding a cane. A dog is sitting at his knee. The photograph has ben taken outside in a garden.on back - "Samuel Smith, Head Lighthouse Keeper at C. Everard, retired 1904"cape-everard point-hicks smith-samuel

Instructions related to compulsory attendance to Parade of Battalion with aim to divide the companies into 3 from 2.An instruction to all cadets of No. 2 Victorian Senior Cadet Battalion to attend parade. Single piece of white paper with black writing. Tattered edges and water stained. Writing in black on one side only.Headed "No2 Victorian Senior Cadet Battalion" with instructions to attend Compulsory Parade.passchendaele barracks trust, document

A community-led project to contribute to a vision for the Shire of Nillumbik. Between October 2011 and June 2012, Nillumbik Shire Council undertook a community information gathering project to ask residents "what is your vision for your local community?” Picture Nillumbik represents a collection of responses from community groups, schools and households via online submissions, photos, interviews and workshop contributions. The resulting document provides a snapshot of the values, ambitions and resilience of Nillumbik communities. The project aimed to inform community planning and identify how Council can work better with residents. The resulting document provides a snapshot of the values, ambitions and resilience of Nillumbik communities. Aimed to inform community planning and identify how Council can work better with residents. Further that the document be inspiring, stimulating and a reminder that the future is worth planning for. Includes a number of case studies of local organisations and projects including: Christmas Hills - Butterfly Studios, Strathewen Tree Project, St Andrews mosaic seat, Eltham & District Woodworkers Inc., Edendale Farm - Home harvest, Hurstbridge, Bend of Islands, Bendigo bank, Dunmoochin - Cottles Bridge, Artists Open Studios Program, World Matters and Past Matters, Nillumbik Reconciliation Group, Boots for all. Chapters include: Deep connection and resilient community, local village life, Balance with nature, a sustaining and evolving economy, creative expression, art and cultural exchange, experience discovery and fulfilment and stewarding the Nillumbik way. Each chapter includes further questions for discussion.Spiral bound document printed in landscape format. Includes text and colour photographs. 196 pagesSmall piece of paper headed "DRAFT" included at the front of the document when bound.shire of nillumbik, planning, future, christmas hills, strathewen tree project, st andrews, eltham & district woodworkers inc., edendale farm, bend of islands, dunmoochin, artists open studios program, nillumbik reconciliation group, community groups, vision, strategy

This bayonet and scabbard was made for the Charles Lancaster .577 calibre Oval Bore Carbine and was known as the Pattern 1855 'Sappers and Miners' bayonet because they were designed for use by the Corps of British Royal Sappers & Miners. The first model Sappers and Miners bayonet appeared in 1841 and differs significantly from this type. Pattern 1855 bayonets were issued to some volunteer units of the Victorian defence forces in the late 1850s, Stylised beaked-brass pommel with T- shaped attachment slot. A steel press stud operates the locking catch via a steel leaf spring on right side of hilt. Two-piece black chequered leather grips. Left grip has four small steel rivets, right grip three rivets and the leaf spring securing screw. Brass cross-guard with formed muzzle ring. Long single-edged, pipe backed, quill pointed 24 inch (615mm) steel blade. Original leather scabbard with brass locket and chape.Knight's Head stamping of the German Solingen-based firm Carl Reinhard KIRSCHBAUM bayonet, victorian defence forces, lancaster carbine

Red cover book, 223 pages, title ' Outlines of English History' printed on front cover. Written top RH corner 'Merle Bush "Girton" Bendigo. Inside cover lists of dates relating to English kings and queens. Dates July 28th 1914 and Feb 12th 1915, handwritten in pencil and 'keep this excellent for reference, M Bush, outlines Carter' Autographs on first page: Jessie Mossman; Nancy Green; Flora MacKay, presumably fellow students at Girton. Merle Bush C.EG.G.S, Girton, Bendigo, handwritten on top RH corner.George Carter, M.A. Late Head Maser of New College School, Oxford.person, bendigo, merle bush

Hinged tin, empty, decorated lid.NILE Egyptian cigarettes, Blue background, pyramids, palm trees, and head of Pharoh.cigarettes, tin

The Kew Historical Society's postcard collection includes views of Kew, Melbourne and Greater Melbourne as well as those including overseas scenes sent or received from Europe or the Middle East. They date from the 1890s to the 2000s. These postcards may or may not include the name of the publisher or printer. A number of the cards were published as parts of popular series. A way of dating early postcards is to identify whether the reverse was divided by a central line which became the norm after 1902 in the United Kingdom. However, other postcards produced after this date do not always conform to this print layout.Polychrome postcard of the Wertheim Piano factory in Richmond.KH-152. H.V. Barlow, Head Office, 173 William St., Melbournewertheim piano factory, bendigo street - richmond, postcards -- richmond (vic.)

Inspected by Joanna Freslov, archaeologist 2.6.2008. Ground-edged axes first appeared in south-eastern Australia about 4,000 years ago and were used either with handles or hand-held. Stone tools were used for a variety of purposes, in ways similar to those of steel knives, axes, hammers and chisels. Ground-edge tools are made from fracture-resistant stone, such as basalt. This is able to withstand repeated impact making it suitable for use in objects such as stone axes. The stone was quarried, and then roughly shaped into a tool blank with blows from a hammerstone. The edges were then sharpened and refined by grinding the tool against a coarse, gritty rock. The necessary tools and equipment for hunting, fishing and warfare were one of the very few items that Aboriginals carried with them from place to place. Most were used for a multiplicity of purposes. Because many were made from raw natural materials, such as wood, generally only partial remains are found today. This item is an example of a stone tool used by the early Indigenous people of Eastern australia.A handmade stone Aboriginal axe head.axe-head aboriginal tool stone-artefact

Inspected by Joanna Freslov, archaeologist 2.6.2008 Ground-edged axes first appeared in south-eastern Australia about 4,000 years ago and were used either with handles or hand-held. Stone tools were used for a variety of purposes, in ways similar to those of steel knives, axes, hammers and chisels. Ground-edge tools are made from fracture-resistant stone, such as basalt which is able to withstand repeated impact, and so is suitable for use in objects such as stone axes. The stone was quarried, and then roughly shaped into a tool blank with blows from a hammerstone. The edges were then sharpened and refined by grinding the tool against a coarse, gritty rockThe necessary tools and equipment for hunting, fishing and warfare were one of the very few items that Aboriginals carried with them from place to place. Most were used for a multiplicity of purposes. Because many were made from raw natural materials, such as wood, generally only partial remains are found today. This item is an example of an early axe head used by the Indigenous people of East Gippsland.A handmade stone Aboriginal axe head.aboriginal tool stone-artefact axe-head

Inspected by Joanna Freslov, archaeologist 2.6.2008. Stone tools were used for a variety of purposes, in ways similar to those of steel knives, axes, hammers and chisels. Ground-edge tools are made from fracture-resistant stone, such as basaltwhich is able to withstand repeated impact, and is suitable for use in objects such as stone axes. The stone was quarried, and then roughly shaped into a tool blank with blows from a hammerstone. The edges were then sharpened and refined by grinding the tool against a coarse, gritty rockThe necessary tools and equipment for hunting, fishing and warfare were one of the very few items that Aboriginals carried with them from place to place. Most were used for a multiplicity of purposes. Because many were made from raw natural materials, such as wood, generally only partial remains are found today. This axe head is an example of an early stone tool used by the Indigenous people of Eastern Australia.A handmade stone Aboriginal axe head.aboriginal tool stone-artefact axe-head

A4 newsletter with blue mast head ballarat college of advanced education

Ink on paper drawings of Poppet Head.chiltern valley, chiltern valley gold mines co ltd, poppet head, drawing, mining

Head and shoulders of three unknown women.On back: "18"glen iris presbyterian church

Born 26/2/1924. Ordained 1956. Turiff Home Missionary 1948, Birchip (HM) 1948–49, Mt Isa (Methodist Inland Mission) 1949–51, Drysdale 1952–55, Goroke 1956–57, Sea Lake 1961–65, Avoca 196–67, Strathmore 1967–72, Ballarat West 1973–76, Joined the UCA 1977. Without settlement 1976 while transferred to Rochdale (UK), Boronia, Malvern (6 years), Peterborough (UK). Retired to Geelong in 1989, and died late 1997. Wife: Ruth (4 daughters).Head and shoulders B&W photo."The Rev. Ken Eddy"eddy, kendall w.

Head & shoulders portrait, wearing a suit."Rev. E. Charles Harris, President, Uniting Aboriginal & Islander Christian Congress"harris, charles, aboriginal and islander christian congress

Anne Amos retired 2010.Head and shoulder photographs of Anne Amos.Identification of the persons.amos, anne

John Ralph was interviewed by Bernard Long in an article entitled "Profit and the Christian - Bernard Long breakfasts with me at the top and later with folk at the bottom." Ralph was managing director of CRA, chairman of Comalco, at the time.Head and shoulders portrait of John Ralph.Identification of person and source.profit and the christian, long, bernard, church & nation, ralph, john

Mrs. Maureen Boaler was Director of the Share Community Appeal for 1985.Head and shoulders photogarph of Maureen Boaler."Maureen Boaler C&N 13/3/1985 page 13"boaler, maureen, share community appeal

Reverend Wesley Johns was born in Victoria in 1864 and died in Box Hill in 1933. He commenced his ministry in 1886. He was stationed at Benalla and Euroa 1886, Wodonga 1887 Dromana 1888 Nathalia 1889 Kerang 1890 Horsham 1893 Blackwood 1895 Kilmore 1898 Forth 1901 Wangaratta 1904 Portland 1907 Brighton New Street 1910 North Melbourne 1912 Colac 1916 Ringwood 1921 St Kilda 1924 Oakleigh 1926. He was Financial Secretary of District between 1918 and 1926.B&W photograph head and shoulders.johns, wesley, reverend