The Germans bought some guns during World War I, but used them as infantry guns in direct support of the infantry where their light weight would allow them to move with the infantry. They complained that the guns were too fragile and didn't have a high enough muzzle velocity to act as an anti-tank gun. Considering that the guns were designed to be disassembled it's not too surprising that they couldn't stand the abuse moving through the shell-pocketed front lines on the Western Front.This particular Gun was captured by Australian Soldiers at the Battle of ST Martins Wood near Ypres in the 3rd Battle for the Somme. The German crew were all killed as were a number of AustraliansThe Skoda 7.5 cm Gebirgskanone M. 15 was a mountain gun used by Austria-Hungary in World War I. In German service it was known as the 7.5 cm GebK 15. Its development was quite prolonged as the Austrians couldn't decide on the specifications that they wanted. Initially they wanted a gun that could be broken-down into no more than 5 pack-animal loads to replace the various 7 cm mountain guns in service, but prolonged trials proved that the 7.5 cm M. 12 prototype to be the best gun. The guns were delivered beginning in April 1915 instead of the planned date of April 1914. For transport, the gun could be dismantled into 6 parts, generally carried in 4 loads. In addition, there was a gun shield fitted on some (perhaps many) such guns. ypres st martins wood skoda gun

Correspondence between Mr Goddard and Repatriation Department regarding War Pension entitlements. Specifications of work to be done and materials to be used in the erection of a timber residence at 15 Eastfield Road, Ringwood East, for E.K. Goddard. Contract of Sale of Land at Lots 55 & 56 on P/S No.10492, part of Crown allotments 27 and 28,B, Parish of Ringwood, County of Mornington. Miscellaneous receipts from 1947-1953 including Hire Purchase Agreement for Hillman Minx car. Also includes letter from Presbyterian Ladies' College referring to 1953 term 1 fee of £18.0.3 for Margaret Goddard Receipts from Wiltshire's East Ringwood Hardware, 98 Railway Avenue, East Ringwood, Phone 87-6092, 8/7/1962.

Part of a collection of items donated by Mrs Robyn Adams. Mrs Adams' father, Victor Clyde, was a wool grower who owned and used all of the items donated.Light pale blue/green lined paper page. Top part of page has typed black ink describing instructions on how to fill in lined section below, beneath headings reading -GOLSBROUGH, MORT & COMPANY LTD, MELBOUNRE- and -OWNER'S OR CLASSER'S SPECIFICATION OF WOOL CLIP-. Lower two-thirds of page is bordered with pink lines and split into six coloumns under headings. Fields can be filled in with information about wool lip/size/wiehgt/quality/bale stencil number/etc. Reverse of page is the same. Page has one vertical fold line in the centre and three horizontal fold lines. There is a dark blue line on the front and matching larger stain on the back, most likely from a carbon copy paper.elder smith goldsbrough mort limited, waybill, wool sales, wool clip, mrs robyn adams

Black and white photograph of MMTB SW6 850 probably soon after n. Side on photograph of tram. Destination City gives build date 1939 and notes that car was built with a tail light/s, which is visible at the right end of the tram. Has cropping marks in ink on right side of photograph. On rear is a type note (glued on sheet of paper) specifications of the tramcar and car dimensions. Destination City 5th edition gives a view of the tram - 3/4 front on showing the tail light arrangement - p41. Also on rear is "Sutcliffe Pty Ltd, Commercial Photographers 94 Elizabeth St. Melbourne, Cent 1500" stamp in light blue ink. and date stamp of print - "12 Jan 1946". See Destination City, 4th Edition and 5th edition.On rear in ink is notations "57", and measurement "4 9/16" with cropping mark.trams, tramways, mmtb, sw6 class, tram 850

Thirty two page book contained within a heavy card cover, saddle stapled. Printed on gloss paper with many black and white photos inside and colour cover. Book titled "Melbourne Tram Review" written by R.A. Birrell Details the formation of the MTA, The Met or the Metropolitan Transit Authority from the MMTB in 1983, the changing nature of the fleet, depots and allocations of tramcars, listing of tram classes, with various technical specifications, including tramcar numbers and photographs. For the B class, includes those which were not in service at the time of publication. Two separate allocation listings are given, the last one being that at 19/9/1988. Has contents pages, introduction by author and on rear cover, a listing of other publications produced by the publisher, Railmac. On the title page, (page 1) in green ink "Ex B.K."trams, tramways, melbourne, mta, metropolitan transit authority, tramways, tramcars

Number 1522/2000 Millennium Limited Edition Wilson 'Jack Kramer Autograph' unstrung tennis racquet. The racquet features a Balmforth 'Fairway' leather handle grip, and a document strung into the netting area, providing Kramer's player statistics and racquet specifications. Autograph of Jack Kramer features along length of handle grip, and along the racquet document, on obverse. Racquet comes with: a vinyl cover with strap; protective cover for racquet cover; a packet of Wilson 'Sensation NXT 16' strings; a certificate of authenticity, with envelope; and a two piece box. Box features inscription on lid: THE JACK/KRAMER/AUTOGRAPH. Materials: Hyper Carbon, Graphite, Kevlar, Nylon, Paint, Plastic, Ink, Adhesive tape, Leather, Cardboard, Glue, Vinyl, Metal, Cellair, Papertennis

Agreement made the 3rd of January 1958 between Thomas James Roberts of 1 Ashley Street, Bendigo builder) and Peter William Tieman and Edith Ruby Tieman both of 60 Hodgkinson Street, Bendigo (owners) whereas the owners have land in Specimen Hill Road and have requested he builder to erect a dwelling house thereon. There 8 clauses on the agreement. There is also a sheet detailing the specifications for the build. Price: 2,300 pounds. Also, a paper signed by T. J. Roberts on the 3rd of January 1958 that on completion of contract for new building on block, lot 28, Specimen hill Road, Golden Square for P. W. & E. R. Tieman agreeing to pay H. A. & S. R. Wilkinson the sum of 82 pounds 10 shillings for commission due on such contract.h.a. & s.r. wilkinson, real estate, buildings

Set of two pamphlets, A4 full colour reporting on the use of ASEA equipment in new trams for Melbourne. .1 - ASEA Pamphlet TB45-101E, Edition 1, June 1974 titled "Tramcars for Melbourne Australia", featuring a photo of 1041 (MMTB Photo) and an interior photo of the tram. The caption notes that there is no ASEA equipment on the tram. Describes the detail of the equipment to be supplied and some details of the tram and the Melbourne tramway system. .2 - ASEA Pamphlet 7967-28E Edition 2 titled "Tramcars for Melbourne" featuring a photo of Z1, possibly posed with a number of male passengers, showing route 88, City Spencer St. Gives details of the tramcar, specifications, notes differences between Gothenburg Tramways and Melbourne and that the trams are built by Commonwealth Engineering. Both documents printed in Sweden.trams, tramways, z class, new trams, 1041, asea, comeng, tram 1041, tram 1

Report - approx. 55 A4 photocopied sheets - bound with white comb binding, with embossed leather imitation grey card covers, titled "Symposium 'Electric Traction Systems' ", presented by the Institution of Engineers Australia, Vic Div, Tues 6/5/1975. Contains three papers: 1 - "Electricity of Transportation" - R. G. Chapman, SEC 2 - "Electric vehicles for Street Transport:" - F. D. Snell - MMTB 3 - "Electric Railways" - A. Firth - VR Paper 2 looks at the history of the MMTB system, the W class tram, control systems, lack of new trams in the 1960's, ordering of the Z class tram, its specification and manufacture, 980, 1041 and other forms of public transport on roads - trolley buses, gadgetbahns, and lots of possibilities of new systems including battery vehicles.On rear in ink in top right hand corner "D. W. Lees"trams, tramways, reports, mmtb, tramcars, pcc class, z class, melbourne, history, trolley buses, electrical engineering, controllers

Foolscap Manila Folder titled "PCM Tram Equipment" with the following papers secured with an Arnos binder. Many of the documents seem to have been copied onto heat sensitive paper. Have tissue paper separating them. 1. Wiring Diagram - GE PCM Control Equipment - R4284B. 2. Westinghouse - Load test on Repair Railway Motors 3. Letter to Chief Engineer MMTB from Australian General Electric - 23/7/1935 - re delivery of 15 cases of PCM Equipment by ship and attaching drawings. 4. Drawings and maintenance notes for above - includes field shunts, magnet valves, cases, 5. GE Specification Ry-5313 - General Electric PCM Control for 4-40HP 600Volt Motors with Shunted FieldsOn rear cover in ink "To Norm Cross"trams, tramways, electro pneumatic, pcm, controllers, general electric, mmtb, tramcars

These nine photographs were most likely taken in c1988 in Lithographic Squadron at the Army Survey Regiment, Fortuna, Bendigo. The equipment operated by the technicians is the KLIMCH camera. The main tasks undertaken by the technicians were most likely enlargements and reductions of map reproduction material. The KLIMSCH Commodore camera was introduced in 1953 and was the largest in the Southern Hemisphere. It was replaced with a new model of the same size in 1979. The new model with its computer-based interface provided productivity gains with improved speed and its consistent results led to less wastage in time and materials. Its variomat lens system provided improved retention of map feature linear weights during the camera reduction process. The camera which was specially made for the Army in Germany was fully automatic and power operated. It was claimed to be one of the biggest automatic cameras of its type in the world. It was made to the specifications of the Royal Australian Army Survey Corps to assist in the production of the very high standard maps for the Army. There are several more photos catalogued in the Victorian Collections database of RA Svy personnel operating the KLIMSCH camera.This is a set of four photographs of technicians operating the KLIMSCH Camera at the Army Headquarters Survey Regiment, Bendigo c1988. The photographs are on 35mm colour slides scanned at 96 dpi. They are part of the Army Survey Regiment’s Collection. .1) - Photo, colour, c1988, KLIMSCH Camera. .2) - Photo, colour, c1988, KLIMSCH Camera, unidentified technician. .3) - Photo, colour, c1988, KLIMSCH Camera. .4) - Photo, colour, c1988, KLIMSCH Camera, L to R: SPR Shona Hastie, CPL Paul Baker. .5) - Photo, colour, c1988, KLIMSCH Camera. .6) & .7) - Photo, colour, c1988, KLIMSCH Camera, SPR Shona Hastie. .8) & .9) - Photo, colour, c1988, KLIMSCH Camera, SPR Russell Pajank.35mm colour slides are in good condition.rasvy, royal australian survey corps, army survey regiment, army svy regt, fortuna, asr, litho sqn

The Hepburn Pool was built in Spring Creek during the 1930s by the Zelman's of Bellinzona Guest House. Alberto Zelman's paid for local workers to construct the pool to their specifications so the visitors to local guest houses could swim on hot days. The Hepburn Pool was used for the Victorian Swimming Championships, with 6 stones marked at one end for each lane . It is 50 yards long, the length required for competitions. In 1969 the Daylesford Olympic Swimming Pool was constructed so this 'old swimming pool' was neglected, fortunately in 1993 local volunteers associated with the Savoia Hotel returned the pool to its former glory with the help of old photos and a lot of hard work. Two well known swimmers swam at the pool in the Victorian swimming Championships, they were Annette Kellerman and Frank Beaurepaire. The Pool was named Victoria's Favourite Built Place in 2004 as part of the Victorian Government's involvement in the International Year of the Built Environment. It was included on the Victorian Heritage Register following a nomination and comparative analysis of pre Olympic Swimming Pools in Victoria by Lisa Gervasoni.Black and white imageof the Hepburn Pool in Spring Creek, with spectators on the hill. hepburn springs swimming pool, hepburn springs, hepburn pool, pre-olympic swimming pools, albert zelman, bellinzona, pre-0lympic swimming pool

The Hepburn Pool was built in Spring Creek during the 1930s by the Zelman's of Bellinzona Guest House. Alberto Zelman's paid for local workers to construct the pool to their specifications so the visitors to local guest houses could swim on hot days. The Hepburn Pool was used for the Victorian Swimming Championships, with 6 stones marked at one end for each lane . It is 50 yards long, the length required for competitions. In 1969 the Daylesford Olympic Swimming Pool was constructed so this 'old swimming pool' was neglected, fortunately in 1993 local volunteers associated with the Savoia Hotel returned the pool to its former glory with the help of old photos and a lot of hard work. Two well known swimmers swam at the pool in the Victorian swimming Championships, they were Annette Kellerman and Frank Beaurepaire. The Pool was named Victoria's Favourite Built Place in 2004 as part of the Victorian Government's involvement in the International Year of the Built Environment. It was included on the Victorian Heritage Register following a nomination and comparative analysis of pre Olympic Swimming Pools in Victoria by Lisa Gervasoni.Black and white image from a glass plate of the Hepburn Pool in Spring Creek, with spectators on the hill. and swimmers in the water.hepburn springs swimming pool, hepburn springs, hepburn pool, pre-olympic swimming pools, albert zelman, bellinzona, pre-0lympic swimming pool

The Hepburn Pool was built in Spring Creek during the 1930s by the Zelmans of Bellinzona Guest House. Alberto Zelman paid for local workers to construct the pool to their specifications so the visitors to local guest houses could swim on hot days. The Hepburn Pool was used for the Victorian Swimming Championships, with 6 stones marked at one end for each lane. It is 50 yards long, the length required for competitions. In 1935 the Hepburn Amateur Swimming Club organised their first swimming carnival, the meeting conducted by the Victorian Amateur Swimming Association, In 1969 the Daylesford Olympic Swimming Pool was constructed so this 'old swimming pool' was neglected. Fortunately in 1993 local volunteers associated with the Savoia Hotel returned the pool to its former glory with the help of old photos and a lot of hard work. Two well known swimmers swam at the pool in the Victorian swimming Championships, they were Annette Kellerman and Frank Beaurepaire. The Pool was named Victoria's Favourite Built Place in 2004 as part of the Victorian Government's involvement in the International Year of the Built Environment. It was included on the Victorian Heritage Register following a nomination and comparative analysis of pre Olympic Swimming Pools in Victoria by Lisa Gervasoni.Black and white photograph of the Hepburn Pool in Spring Creek, including the diving board.hepburn springs swimming pool, hepburn springs, hepburn pool, pre-olympic swimming pools, albert zelman, bellinzona, annette kellerman, frank beaurepaire, victorian amateur swimming association, hepburn amateur swimming club

After meeting for 14 years in rented premises, in the Prince of Wales Hall, Wodonga Council built its first Shire Hall on the corner of High and Elgin Streets in 1890. The first Shire Hall was demolished in 1971. The second building, Wodonga’s new Municipal Offices in Woodland Grove were used for the first time by Wodonga Councillors on 7th August 1957. The Woodland Grove building has since been used for a range of purposes, most recently as a café, but is currently unoccupied. The third purpose-built council chambers were opened in November 1976 with the first council meeting there on 1st December 1976. Westminster Fine China Australia started in the Melbourne suburb of Cheltenham at 7 Arnold Street, in 1954 by Stanley Rogers and Son Ltd. They initially used imported blanks from Japan, which were made to their specifications, and which were then decorated locally. They produced a standard range of shapes for souvenir ware, later expanding into a wide range of tea sets, dinnerware and many other styles of china ware. The Abbey mark, based on Westminster Abbey in London, was used from the start of production until about 1962.Woodland Grove was named in honour of Wodonga Shire’s first president, John Woodland. The building depicted served as the centre of municipal government for approximately 20 years, throughout the 1960s and 1970s. Woodland Grove is a central point in the Wodonga CBD and a focus for many civic and cultural activities.Small square plate with gold trim and central coloured image of Wodonga Shire Chambers. The trademark of Westminster Fine China Australia is on the under side of the plateOn front beneath image "SHIRE CHAMBERS WODONGA VIC" Underneath the plate, surrounding an drawing of Westminster Abbey "FINE CHINA/WESTMINSTER CHINA /AUSTRALIA/ 7" municipal offices, woodland grove wodonga, souvenirs, westminster china

Released in August 2004, the VZ series was a minor facelift of the previous VY series that featured a new V6 engine in different tune guises. The powerplants included 175 and 190 kW (235 and 255 hp), 3.6-litre Alloytec V6 engines in place of the older 3.8-litre Ecotec V6. Other changes to the V6 was the loss of the supercharger that was included in the S models The VZ Commodore was available in several model variations, most of which carried over from the VY range, with the exception of the newly introduced SV6, a specification level that replaced the S range. All models in the Commodore range (Executive, Acclaim, Berlina, Calais, SV6, SV8 and SS) were available as sedans. The advanced 3.6-litre Alloytec engines were more powerful, responsive and fuel-efficient than the outgoing Ecotec V6. To achieve 190 kW (255 hp), the Alloytec V6 gains variable valve timing on both inlet and exhaust sides as well as a dual stage intake manifold, while the 175 kW (235 hp) version retains variable valve timing on the inlet side only. Sales of the VZ series failed to match those of the preceding VY in light of rising small car sales, higher fuel prices and growing interest in the whole new replacement, the VE series. Selected models bring advanced active safety features that electronically assist the driver to maintain vehicle control in emergency situations. VZ Holden 4 door sedan with red body paint and fabric upholsteryLion badge front grille,V6 badge on mudguards. Executive badge on RHS of boot and Comnmodore on LHS. Lion badge on middle of bootvehicle, vz holden, car

Hand written data on the safety cage. The first page is a memorandum to Mr J H Seymour from the International patent & Trade Marks Office informing Mr Seymour that the Provisional Specification of his invention has been accepted in Victoria, dated 17 Oct 1892. The second page is a copy of a card from John H Seymour, City Foundry, Wattle St. Sandhurst outlining the safety cage, the lives it has saved and orders will receive prompt attention and further information may be had from the above address. W. Holmes, Printer. The third page is to Miss Kingerlee from Allan Llewellyn with reference to the memorandum and card dated Sept 1, 1972. He says he copied the memorandum and card for her and Mr F Fitzpatrick has the originals. The fourth page is a typed copy of Claim Holders and expenses.document, gold, safety cage, memorandum - safety cage, edwd waters, j h seymour, international patent & trade marks, city foundry, w holmes, miss kingerlee, mr frank fitzpatrick, allan llewellyn, jno t caldwell, geo staley, neil walker, a n hamilton, william holland, j w weddle, jas lawes, wm hopwood, jas lawes, wm parker, r w pollard, wm nan & co, hope & co, mrs morgan, j w & g williams

Set of documents sewn within a green folder titled "Contract between The Chairman and Members of the Footscray Tramway Trust and The Australian General Electric Co. Queen St Melbourne for the supply, delivery and Erection of Rotary Converters, Transformers and Switchgear for the Footscray Tramway Trust" containing: 1 - "Footscray Tramways Trust - General Conditions, Specifications and Forms for Tendering - Tender for the Supply Delivery and Erection of Rotary Converters, Transformers and Switchgear", Schedule of Prices, Tender Form, Schedule of documents, contract dated 31/7/1919, includes the seal of the FTT and copies of some 10 letters clarifying matters between the time of the tender and documentation. Documents have been signed and sealed. See page 5 bottom right hand corner for the FTT Seal. Documents prepared by Christie & Gardiner, Consulting Engineers, 97 Queen St Melbourne. Parts of the document have scanned to pdf.Has in pencil in the top right hand corner "49"trams, tramways, ftt, footscray, rotary converters, electrical engineering, electrical equipment, tenders, contracts

These trousers are part of a Disruptive Pattern Combat Uniform issued by the Australian Airforce to Bernard Farley during service. This uniform type was used in base and field activities and was replaced in 2014 by the General Purpose Uniform as the uniform worn during general base duties and in non-warlike environments.This item has social significance, as an item of uniform worn by Warrnambool RSL community member and Secretary (2019), Bernard Farley during service with the Australian Airforce. The item is a representative example of previously standard issue Airforce uniform and is in excellent condition. As a set, the uniform has aesthetic significance in it’s design, incorporating the Disruptive Pattern style of camouflage which has its roots in the 1980s and continues to be adapted into uniform design by the Defence Force.Disruptive Pattern trousers in five colours of green and brown. Long pants with elasticised drawstring fastener at ankle and velcro adjustment fasteners at the waist. Pants take a straight leg style and bears several pockets: two thigh level pockets with zippered horizontal opening, two open hip pockets on the front, one open pocket on the reverse right hand side with blue plastic button fastener. Five large belt loops encircle the waist and there is a zippered fly, secured at the top with a blue plastic button.Label on interior front right of trousers reads: “A13/ADA/VICTORIA 2008/(broad arrow)/SPECIFICATION ARMY (AUST)6542/NSN: 8415 66 152 1059/SIZE: 95 S/NAME/SERVICE NO/75% COTTON 25% POLYESTER/WARM MACHINE WASH 40*C/RINSE WELL, WARM IRON/DO NOT IRON OVER HOOK AND PILE/DO NOT BLEACH/DO NOT STARCH/MAY BE TUMBLE DRY 40*C/MADE IN AUSTRALIA” The name “FARLEY” is also handwritten on the back interior waist band of the trousers. camouflage, general purpose uniform, airforce, uniform, australian defence force

These boots were manufactured by Oliver Stevens in Ballarat to the Forests Commission's own specification. Safety boots were a bit "hit and miss" back in 1981. As well as the steel toe caps these boots had a screwed, glued and stitched Sherpa-pattern rubber nitrile sole. The sole was oil resistant and didn't melt on hot coals. The yellow heels signified safety boots. There were two styles with different leather and staff were all personally fitted and given their choice of style. The only thing that has fundamentally changed over 40 years is there is much more choice and comfort in boots today. These boots proved to be the catalyst for boot manufacturers realising there was a market outside of the armed forces not being served. Ankle injuries along with elastic sided boots were virtually eliminated by these boots. The iconic Tasmanian company, Blundstone, had a work boot called "Forester" at the time. It had won an Australian Design Award and had a bonded Sherpa sole. Unfortunately, the soles tended to separate from the boot under field test conditions. Eventually they perfected the process Oliver Stevens' main issue was not being able to recruit enough workers to meet the increased demand. Info: Trevor Brown.First safety boots issued to Victorian forest firefightersYellow Back safety boots with leather laces. FCV marked on the heel fire fighting, bushfire, forests commission victoria (fcv), protective clothing

Sixteen page book with brown paper covers in addition. Pages printed on art paper with a red overprint on some pages. Titled "Nachod Signals", published by the Nachod and United States Signal Co. Inc, successors to Nachod Signal Co of Louisville Kentucky. Has a list of dates on page 2, of patents, the last being 5/2/1918. Has on the bottom of most pages "Nachod Spells Safety" Details the Nachod signals system, type CD with the details of the operation, elements of the system, signal layout, installation and wiring, trolley Contactors, signal aspects, relays, assembly on poles, ordering information, fuses, special designs and modifications, information in ordering, quantity and list of material, and specification details of the Type P on the last three pages. See also Reg Item 3318 for another US company system, received by ESCo at the same time. Indicates that the Nachod and US Signal Company had merged.On top of page 1 "Ballarat Tramway Preservation Society Catalogue No. 3" in black ink and overstamped ESCO's date stamp of 4 Nov. 1926. On page 2 at bottom :"Nachod and United States Signal Co. Inc successors to" has been overstamped. trams, tramways, signals, railways, tramways

Set of 7 manuals, documents, instructions regarding truck, bus, motors produced by Volvo. .1 - Volvo Truck facts – 88-89 - approx. 70 pages with diagrams, card covers. .2 - Volvo bus data sheet set - 9 foolscap sheets with data on chassis, servicing and general specifications. .3 - Lubrication recommendations for Volvo buses – post 1950 - Foolscap - approx. 40 sheets. .4 - Volvo Service bulletin – service intervals for oil and filter - single A4 sheet. .5 - Volvo service bulletin – Lubricating oil and recommendations - single foolscap sheet, .6 - Volvo turbo diesel and its Bosch injection system - manila folder containing about a 30 pages document titled "The Volvo TD100A Engine". .7 - Letter to MMTB 1977 re oils from Volvo Australia - correspondence - 10 sheets - dated 3/6/1977, with a note saying it does not answer the question.trams, tramways, volvo, buses, instructions, manual, equipment, maintenance

The HP-85A was Hewlett Packard's first Series 80 microcomputer, introduced about 1979. It had a keyboard, a dual alpha/graphics monochrome display, a bidrectional alphanumerics and graphics printer, and mass storage tape drive all integrated into a marvelously designed and compact case. It's operating system was seemlessly integrated with a powerful BASIC programming language that included intuitive graphics and input/output capabilities. The HP-85A was also wonderfully expandable through four ports on the back of the case for adding plug in ROMS and modules. Specifications CRT DISPLAY Size: 12.7 cm (5 in.) diagonal Alphanumeric capacity: 16 lines x 32 characters Graphics capacity: 192 x 256 dots Scrolling capacity: 64 lines Character set: 256 characters; set of 128 + same set underscored Character font: 5 x 7 matrix Intensity: adjustable Cursor: underscore BASIC LANGUAGE AND OPERATING SYSTEM Standard ROM - 32K bytes Maximum add-on ROM - 48K bytes CRT memory RAM - 8K bytes USER READ/ WRITE MEMORY Standard - 16K bytes Maximum - 32K bytes TOTAL MEMORY Standard - 56K bytes Maximum - 120K bytes (Information from http://www.ebbsoft.com/hp/85a.htm)Personal computercomputers, monitor

Mary Halls "Minnie" Crabb (1885-1974) was the niece of the first librarian (May Harrison) for the Victorian Association of Braille Writers. After her aunt's death in 1912, Miss Crabb took on the role of librarian for the constantly expanding collection. In 1934, the Victorian Association of Braille Writers annual report advised that it had acquired a Crabb-Hulme Braille Printing Press. Two years in development, the Press was designed by Miss Crabb and built to her specifications by Mr Hulme. Invented to produce ephemeral material quickly, such as programs, catalogues and newsletters, it provided more opportunities for information to be quickly sent out to Braille readers. The daughter of James Hall Crabb, who ran the Prahran Telegraph from1882 until his death and the niece of J.M. Yelland who took over the paper until he sold it in 1895, Minnie would have seen printing presses in her youth and recognised the usefulness when producing large numbers of ephemeral materials. In March 1944, Miss Crabb retired from the library, in 1956 she married Charles Foster and she lived until in the St Kilda area until her passing in 1974, aged 89. This iconic image of Miss Crabb using the press has appeared in many reports since.High quality image of Minnie Crabbvictorian association of braille writers, minnie crabb

This item is from a collection donated by descendants of John Francis Turner of Wodonga. Mr. Turner was born on 6 June 1885. He completed all of his schooling at Scotts Boarding School in Albury, New South Wales. On leaving school, he was employed at Dalgety’s, Albury as an auctioneer. In 1924 John was promoted to Manager of the Wodonga Branch of Dalgety’s. On 15/03/1900 he married Beatrice Neal (born 7/12/1887 and died 7/2/1953) from Collingwood, Victoria. They had 4 daughters – Francis (Nancy), Heather, Jessie and Mary. In 1920, the family moved From Albury to Wodonga, purchasing their family home “Locherbie” at 169 High Street, Wodonga. "Locherbie" still stands in Wodonga in 2022. The collection contains items used by the Turner family during their life in Wodonga. Westminster Fine China Australia started in the Melbourne suburb of Cheltenham at 7 Arnold Street, in 1954 by Stanley Rogers and Son Ltd. They initially used imported blanks from Japan, which were made to their specifications, and which were then decorated locally. They produced a standard range of shapes for souvenir ware, later expanding into a wide range of tea sets, dinnerware and many other styles of china ware. The Abbey mark, based on Westminster Abbey in London, was used from the start of production until about 1962.The Hume Weir was constructed in the late 1920s and was a critical state in the development of water management in the Murray Darling Basin. At the time of its construction it was the largest water reservoir in the British Empire. Small bowl with gold trim printed with an image of the Hume Weir, Albury. The trademark of Westminster Fine China Australia is on the under side of the plate.On front beneath image "Hume Weir, Albury" Underneath the plate, surrounding an image of Westminster Abbey "FINE CHINA/WESTMINSTER CHINA /AUSTRALIA" souvenirs, westminster china, hume weir australia, memorabilia albury