Yields information about some of the rail used in Ballarat and demonstrates the type of rail used in tramways.Section of flanged tramway rail - saw cut from rail, smooth finished - Stamped "BALLARAT" stamped into the web of the rail " 90A", stamped onto the head of the rail. with a hole drilled through the head of the rail."BALLARAT" stamped into the web of the rail and "90A" stamped onto the head of the rail.trams, tramways, rail, ballarat, rail section

Collected by the donor near the time of the closure of the Ballarat system. Was used to provide information on the type of rail used in Ballarat and specifically for rail 85lb/yard weight.Yields information about some of the rail used in Ballarat and demonstrates the type of rail used in tramways. Demonstrates craftmanship in cutting and finishing sections of rail for tramway engineering offices, suppliers etc.Section of flanged tramway rail - saw cut from rail, smooth finished - Stamped "BALLARAT" stamped into the web of the rail " 85", stamped onto the head of the rail. with a hole drilled through the head of the rail.ballarat, rail, rail section, track, tramways, steel

Used from Hawthorn depot in the time recording Bundy clocks that were located around the MMTB system. Related to the driver's shift number. Used until the closure of the Hawthorn tram depot in 1965.Demonstrates a Bundy time recording clock key.Key - or Bundy Clock Key - brass, rounded head with drilled hole stamped "Tramways" with a steel section that controlled the action of the recording clock and provided the means of stamping the number "H5" onto a paper tape. tramways, trams, mmtb, clocks, bundy clock, timetables, drivers, operations, hawthorn depot

Belonged to WO Michael P Greenwood. His military service with Aust Army; Served at Butterworth, Malaysia. Some peacekeeping. Probably some time in the Middle East. He was a qualified parachutist and held a Skill at Arms badge. He served approx 38 years in the Army.1. This is a brass octagonal shaped disc. It has a hole drilled on L & R side. On it is stamped: Aust - 320092 - Greenwood - R.C. - A.Pos. 2. This is a circular brass disc. Stamped on it is the same info as the first disc.aust army, soldier id's, wo m.p. greenwood

Bench wooden trestle leg style sail maker's bench with one raised post, one drill hole for fid; end of bench enclosed by wood to form tray to prevent tools from rolling off. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Slide. . Level at 1045 feet at New Moon Gold Mine, Eaglehawk. Crushing material 70 feet in width. Two men drilling while five look on. Image sourced from 'Healthy Golden Bendigo'No. 43 printed on bottom of slidemine, gold, underground workings., bendigo mines-jack hattam collection.

Sepia tone coloured photograph, R.G.Ford's Submarine Rock Drill and Compressor Made for Melbourne Harbour Trust (c.1879), Markings on rear of photo read 'Central Deborah Collection Copied 18 December 2001'photograph, harbor, r.g.fords, submarine rock drill & compressor

A cream coloured cotton drill jacket with a round embroidered white cloth badge with black writing "Moonlee Tae Kwon Do Australia" around the edge and a gold fist against a red and blue background in the centre.jacket, clothing, mcphail collection

Sent from Germany by Elfriede & Paul Faig.Tools belonging to W. Hermann / G. Kaltenbach - 1. Small metal handle|2. Drilling device, made of metal and possibly made on lathe (no. 7955).|3. Metal thread cutting tool (originally Australian).tatura, camp 3, faig, p, kaltenbach, g, hermann, w, trades, metalworking, handcrafts, woodturning

Cassette magazine in vinyl cover, Contents includes one magazine, one audio cassette, one crossword, one F.A.T.E entry form, one newsletter titled 'Pneumatic Drill',and one 'Cassette- It-Yourself' guide.ink, paper, plastic, vinyl

The Old Identities' Association was a forerunner of the Old Colonists' Association Ballarat. John Brooksbank was a very early arrival to Ballarat in September 1851, which was not long after the discovery of gold at Ballarat. J. Brooksbank lost a dog in 1857 "LOST from the Half Way House, Smythe's Creek Road, a black bloodhound and kangaroo dog. Anyone detaining him after this date will be prosecuted. J. BROOKSBANK" (Ballarat Star, 30 December 1857) Another very early identity in Ballarat, James Oddie, advertised the sale of J. Brooksbank's hotel in 1860: "JAMES ODDIE & CO. have received instructions from the Mortgagees, to sell I by auction at their rooms, Dana street, on Thursday, 20th September, at twelve o'clock, All that desirable properly known as the , Halfway House Hotel, Together with all that piece or parcel of ' land situate in the parish of Cardigan and county of Grenville, containing 34 acres 1 rood 26 ½ perches, part of allotment 1, section 6, of said parish, situated on the Ballarat and Smythesdale road, and recently occupied by Mr J. Brooksbank. The property consists of a spacious stone building one story high, strong and substantially built, the internal fittings and arrangements are neat and complete. The house possesses all requisite accommodation for a respectable country hotel. In addition are stockyards, stables &c, all well and securely fenced. Terms at Sale. (Ballarat Star, 20 September 1860) Four years later Brookbank was selling his hotel in Lyons Street Ballarat: "RARE OPPORTUNITY.-FOR SALE the BLACK BULL HOTEL, Lyons street. The proprietor of the above hotel being about entering into another line of business, begs to call the attention of parties looking for a safe and profitable investment, the above having undergone thorough repairs, and is now in good working order and doing a fair share of business. The conditions will, be half cash, balance six, nine, and twelve months. Apply, J. Brooksbank, proprietor, on the premises. (Ballarat Star, 22 October 1864)Colour photograph of a sterling silver medal relating to The Old Identities' Association 1851-1854. The medallion, belonging to John Brooksbank, has a drilled hole at the top suggesting it was worn by the owner at some stage in its life. The medal has been engraved: Arrived "Sep 51 J. Brooksbankold identities association, old colonists' association ballarat, c.a. welch, silversmith, numismatics, j. brooksbank, medal

Army Summer drill uniform Korea Jacket U086, Pouch EQ112, Trousers U275a, Shirt U275,( Gaiters U146, Boots U136 Belt U088 Woollen cap H031,Scarf MS004,stored separately)uniform, korea, army

Narrow rectangular sign for 'W.H. Paterson Hall' on a white plastic base with raised black lettering. Holes have been drilled into each corner for screw attachments. Possibly attached to the building in 1966.White sign with black letteringW.H. Paterson Hallassociation for the blind, nameplates

Narrow rectangular sign for the 'Hamish Mackenzie Room' on a white plastic base with raised black lettering. Holes have been drilled into each corner for screw attachments. Possibly attached to the building in 1966.White sign with black letteringHamish Mackenzie Roomassociation for the blind, nameplates

This item wasused before diesel, electric and battery drilling apparatus were used by farmers, and other trades requiring a portable yet reliable method of drilling holes. As this item is a 3/4 inch hole drill it would be suitable for fencing and providing holes for structural studs. As with all outdoor farm equipment, man power was required (be it the farmer or farm hands). Fitness of the operator was at a high standard but protective gloves were not highly thought of as it was before occupational, health and safety regulations became mandatory over all manual handling activities, be they on rural properties or town/city factories. This period was one where the male ego was at its pinnacle i.e. the harder the tasks the more of a man was required. Hard manual work was not only the "way to go" but also a necessity. Evolution of cheap portable electric/battery powered tools opened up a more efficient method available, especially to those with less muscle strength. This item personifies the rugged environment of the rural workplace. The Kiewa Valley with its main emphasis on farming and grazing provided ample opportunity to use this construction implement. The manufacturer being a Scottish tool company is very significant in the era when this hole maker was in high demand. British steel products were of high grade and had a good record of reliability. The reliability of any tool was a solid factor for farmers and tradesmen in this semi-isolated region (Circa early 1900s) within the Kiewa Valley and its regional area. This factor,although not as crucial, post 1960s, when Asian manufacturers entered the market place and produced cheaper tools and transportation and supplies was more frequent and reliable, the need for the more expensive British made tools diminished considerably. After the influx of tradesmen from war torn Europe (post 1945) and the increased availability of tradesmen in the Kiewa Valley and its region the price of tools was and still is not as crucial and the cost of all required tools has become a minimal part of the equation. It is only with the emerging younger trades person, farmer and grazier, who have more, "one eye on production costs" and no "old ties to the motherland" inert mind set that quality tools such as this auger and other hand tools "must be made to last a life time" is no longer part of the modern work environment.This cast iron, hand operated Auger has a short barrel shaped cylinder at one end (known as the "Eye") and at the other end a Helical screw blade (screws the cutting edge into wooden material, thereby creating a hole 3/4 inch diameter in the wood) . The barrel section at the top permits a metal or wooden leverage plank to be inserted. The main rod has a 180mm long cutting/screw blade running from the bottom up towards the "eye" end. From the end of the screw blade to the handle is 380mm and cylindrical, but this changes at 550mm from the "eye" end to a 14mm x 10mm rectangular shape shaft.This shaft end is welded to the "Eye".On the shaft below the "eye" is stamped " MATHESON GLASGOW" on the front side and a spade (cards) symbol on the back.auger, hand drill, fencing, tool, rural trades, brace & bit

Yields information about the BTPS placing poles for the overhead along the access track and working on them.Set of 6 digital images scanned from 35mm slides of the installation of poles and bracket arms on the access track mid 1973. .1 - Warren Doubleday about to climb the ladder to work on a pole on the access track - note the access track which had yet to be jointed. .2 - positioning the truck etc. .3 - ditto with Geoff Cargeeg .4 - drilling holes for the poles on the access track .5 - access track looking west with the poles installed and a rather muddy area - winter 1973? .6 - drilling holes for the polestrams, tramways, btps, trackwork, depot, tramcars, overhead

Albert Steane was an early teacher of Sloyd and was appointed Principal of the Ballarat Junior Technical School in 1913.Printed Victorian Education Department certificate on parchment. It certifies that Albert Alfred Whitelock Steane was successfully examined in Field Exercise part 1 and 2, and was deemed competent to give instruction in Military Drill. It is certificate number 11194.steane, albert steane, victorian education department, military drill, military, armed forces, field exercise, parchment

The Ballarat Junior Technical School was a division of the Ballarat School of Mines. It was a school for preparatory technical work in trade, art and science. it opened in 1913 in the bluestone building adjoining Dana Street Primary School. In 1921 in moved into a custom built brick building on the Ballarat School of Mines site. 23 page soft charcoal coloured book. Contents include: Aim of the School, curriculum, compulsory drill, evening school, rules, work programme. Images include: Modelling Class, Sheetmetal Work, Experimental Science, woodworkballarat school of mines, the ballarat junior technical school, alexander peacock, frank tate, donald clarke, d.f. skewes, w. stone, w. fenton, john fraser, p.j. pringle, a.e. cutter, hugh v. mckay, e.c. chamberlain, d. maxwell, f.a. event, frank hassell, clegg, miller, p.s. richards, john white, w.p. davies, m.b. john, jelbart, trahar bros, gower, benoit, stansfield and smith, w.h. chandler, arthur farrer, percival selwyn richards

Colour photograph of farm machinery in paddock near Goornong. Machinery is in a dilapidated condition. Written on back : '29.3.96' farm machinery (seed drill) near Goornong Victoria 14.30 hrs, 29.3.1996 by Roy J Mitchell, Bendigo'Roy J Mitchellagriculture, machinery, seed drill

Copy of an article from the Bendigo Advertiser 1/9/1990 mentioning the Cornish influence on Victorian gold mining during the 1880's and 1890's. Also mentioned is population growth, rock drills and miner's phthisis.bendigo, history, long gully history group, the long gully history group - cornishmen brought their mining skills to bendigo, bendigo advertiser 1/9/1990, dr charles fahey, cornish association of bendigo and district, bendigo college of advanced education, george lansell, the mining exchange, beehive building, eaglehawk fire station, george ellis

The 8th/13th Victorian Mounted Rifles was raised as a regiment of the Royal Australian Armoured Corps on 1 May 1948 with Headquarters in Melbourne and squadrons in Sale, Benalla/Wangaratta and Albury. In 1955 Regimental Headquarters moved to Wangaratta and a second squadron was located at Albury. The Sale squadron transferred to 4th/19th Prince of Wales’s Light Horse. In 1977 8/13 VMR Regiment was reduced to an independent squadron A Squadron 8th/13th Victorian Mounted Rifles and in 1991 was linked with 4th/19th Prince of Wales’s Light Horse forming the VMR Squadron of that regiment.Unique collection of photographs showing the first years of an armoured regiment of the post-Second World War era Citizen Military Forces showing equipment, uniforms, training and social activity and some personalities.Black and white photograph of 13 soldiers standing in front of truck. They are in khaki drill uniform, boots, web anklets, belts and berets.One of a collection of photographs of 8th/13th Victorian Mounted Rifles Regiment between 1948 and 1951." D/S Conversion Course, Albury. 1. Doug Gibbs, 2. Tom Giles, 3. Ernie Grant, 4. Ian McKay, 5. Alan Vietch, 6. Ken Kotthoff, 7. Captain Reg McDermottvmr, uniform, training, mcdermott, mckie

The 8th/13th Victorian Mounted Rifles was raised as a regiment of the Royal Australian Armoured Corps on 1 May 1948 with Headquarters in Melbourne and squadrons in Sale, Benalla/Wangaratta and Albury. In 1955 Regimental Headquarters moved to Wangaratta and a second squadron was located at Albury. The Sale squadron transferred to 4th/19th Prince of Wales’s Light Horse. In 1977 8/13 VMR Regiment was reduced to an independent squadron A Squadron 8th/13th Victorian Mounted Rifles and in 1991 was linked with 4th/19th Prince of Wales’s Light Horse forming the VMR Squadron of that regiment.Unique collection of photographs showing the first years of an armoured regiment of the post-Second World War era Citizen Military Forces showing equipment, uniforms, training and social activity and some personalities.Black and white photograph of group of nine servicemen in variety of uniforms - Army, Navy and Air Force at Albury Drill Hall. One of a collection of photographs of 8th/13th Victorian Mounted Rifles Regiment between 1948 and 1951.Anzac Day Colour Party Sentries, Bill Purcell, Ken Kothoff ( RAN ), John Larkin ( RAAF ), John Neale, Alan Cunningham, Ian McKay, Alan Veitch, Tom Giles, Maurie Davis.

The 20th Light Horse (Victorian Mounted Rifles) was raised in 1920 as part of the 3rd Cavalry Brigade, 2nd Cavalry Division, Citizen Military Forces, with Headquarters at Seymour and depots along the Goulburn Valley from Mansfield to Tocumwal in southern NSW. In December 1941, 20th Light Horse (Victorian Mounted Rifles) converted from horse to mechanised, initially as 20th Motor Regiment. In 1943 the Regiment was deployed to Merauke, Dutch New Guinea. Upon its return in April 1945, the Regiment was redesignated 20th Pioneer Battalion. It was disbanded following the end of the war. 20th Light Horse was the only light horse regiment to serve overseas in WWII.This is one of a collection of photographs featuring a Light Horse regiment drawn from rural and regional Victoria in the period immediately prior to mobilisation for World War 2 (1939-1945).Black and white photograph ,mounted on card, of 20 soldiers standing and sitting. All are in cotton drill work dress, wearing slouch hats with plumes, boots but no leggings. 20th Light Horse Regiment in camp, circa 1939.

Page 824 of Harper's Weekly (10 Dec. 1881), featuring a colour lithographic image of a number of indoor lawn tennis matches being played in the large drill hall of the Seventh Regiment Armory. Materials: Paper, Inktennis

Black and white photograph. Three males underground in Deborah Mine with drill and pick. Lamp on wall. Quartz shows well. Deborah Mine 1000 ft. level. Inscription on back: A. Richardson, 29 Harrison St., Bendigo.mining, underground equipment, miners, bendigo, mines and mining, mine, mines, miners, person, males, workers, group, central deborah mine

The Ballarat Teachers' College Demonstration of Physical Training and Folk Dancing was held in the Ballarat Drill Hall. Instructors were Miss R. Virtue of the Education Department and Lieutenant H. Smith, P.T. Staff with the Defence Department.Folder paper programme associated with the Ballarat Teachers' College.ballarat teachers' college, ballarat drill hall, ballarat ranger barracks, mcnaughton, john mcnaughton, h. smith, r. virtue

Item in the collection re Colonel J. Swatton, refer Cat No 6719.2P for his service details.This is a pocket sized book. the cover is red buckram. on the front cover, embossed in gold, is the crest of Great Britain, under that is the phrase, Infantry Drill 1893, By Authority. It has 260 pages of written text, drawings and music (for bugle calls).passchendaele barracks trust, book, 1893, infantry drills