Large brown glass bottle in original packaging once contained 1lb of ether. The bottle is wrapped in brown paper wrapping with black and red print on a white label. It reads [in red ink] POISON /NOT TO BE TAKEN / WOOLWICH ELLIOTT [logo] / [black ink] 263 61 / Anaesthetic Ether / B. P. / NET 1 LB. / This ether contains 0.002% w/v of Hydroquinone as a / preservative, in accordance with the B.P. / [red ink] CAUTION: Keep well corked in a cool, dark place / [black ink] WOOLWICH-ELLIOTT / CHEMICAL COMPANY PTY. LTD. / SYDNEY / USE BEFORE JAN 1964 / [in red ink] HIGHTLY INFLAMMABLE / [black ink] MADE IN AUSTRALIAether, anaesthetic, poison, glass, bottle, woolwich-eliott chemical co, sydney, anaesthetic ether, hydroquinine, inflammable

A black and white photograph of - With the "directional stakes" in place, Capt Tony Eaton, Kirribilli, NSW, the 1st ATF Artillery Intelligence Officer about to take a compass reading of the incoming direction of a NVA/VietCong 107mm rocket, watched by Sgt Paul butcher (29th march 1969)photograph, capt tony eaton, 107mm rocket, 1st atf base, artillery intelligence officer, sgt paul butcher, nva/vc, luscombe airfield, gibbons collection catalogue

Historic BuildingsB/W Photo of original photograph, Buninyong Town Hall early 1900's (pre 1917, Avenue of Honor trees not yet in place)buninyong, learmonth st., town hall

The Loving Cup was presented to the Royal Australasian College of Surgeons at the inaugural session of the General Scientific Meeting in Melbourne, on 15 May 1977, to mark the 50th anniversary of the foundation of the College. It was presented by Sir Rodney Smith PRCS and Lady Smith, and was a gift from the Royal College of Surgeons of England, the Royal College of Surgeons of Edinburgh, the Royal College of Physicians and Surgeons of Glasgow, and the Royal College of Surgeons in Ireland. The coat-of arms of the Colleges are engraved around the outside. The Cup was made by Roy Flewin, a master craftsman of London. It is sterling silver, hallmarked for the year of the Queen’s Silver Jubilee (1977), and stands 26cm high. It is fitted with two handles and a lid’ and has a gilt interior. The engraving was carried out by Stanley Reece. Whether between friends or lovers, drinking from a Loving Cup is an act of ultimate trust, and is always performed with due ceremony: “A” takes the Cup, filled with wine, and turns to “B”. “A” bows to “B”, and “B” bows/curtsies to “A”. “B” removes the lid of the Cup. “A” drinks from the Cup, and wipes the place he drank from with a cloth tied to one of the handles. “B” replaces the lid, and takes the Cup. If only two people are involved, then they simply reverse rôles. If there are more than two, then the ceremony continues in a similar fashion. The Cup is a token of the friendship and cordiality that exists among the Royal Colleges. In presenting it to E.S.R. (Bill) Hughes, then President of the RACS, Sir Rodney described it as ‘a symbol of our common heritage, and the privileges and responsibilities we share’The Loving Cup was presented to the Royal Australasian College of Surgeons at the inaugural session of the General Scientific Meeting in Melbourne, on 15 May 1977, to mark the 50th anniversary of the foundation of the CollegeSTERLING SILVER 2-HANDLED LOVING CUP WITH LIFT TOP, FINE BUD FILIAL, GILDED INTERIOR AND SCROLLED HANDLES, ON RIBBED PLATFORM BASE, WITH CREST, ETC. (SEE TOORAC AUCTION LIST FOR ALL DETAILS).HALLMARKS AND COATS OF ARMS. UNDER BASE: "ENGRAVED BY STANLEY REECE) PRESENTATION CARD: "LOVING CUP PRESENTED AT THE INAUGURAL CEREMONY GENERAL SCIENTIFIC MEETING, RACS, 15 MAY 1977 BY loving cup, 50th anniversary of the foundation of the college, sir rodney smith, 1977, roy flewin

There have been, even in recent history, many sieges which lasted longer that the French Union garrison's defense of a small town in the northeaster corner of Viet-Nam with the unlikely name of "Seat of the Border Country Prefecture", or , in Vietnamese, Dien Bien Phuvietnam - history, dien bien phu

Double Headed Rail from Ravenswood Station Siding which was dismantled circa 1987 the two rails were stored for a time at Maldon before being donated to Puffing Billy Museum Bearing makers marks of Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield, North East Derbyshire, England from 1872 - 1883 Double-headed rail In late 1830s Britain, railway lines had a vast range of different patterns. One of the earliest lines to use double-headed rail was the London and Birmingham Railway, which had offered a prize for the best design. This rail was supported by chairs and the head and foot of the rail had the same profile. The supposed advantage was that, when the head became worn, the rail could be turned over and re-used. In practice, this form of recycling was not very successful as the chair caused dents in the lower surface, and double-headed rail evolved into bullhead rail in which the head was more substantial than the foot. Info from Wikipedia - Rail Profile https://en.wikipedia.org/wiki/Rail_profile The first records of double headed rail being used In Victoria by Victorian Railways was in 1859, the rails, chairs, oak and trenails were imported from UK. After the 1870’s the Victorian Railways went over to using flat bottom rails, but they still needed replacement double headed rail for lines already laid and this continued up to at least 1883 Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield England from 1872 - 1883 Mount Alexander & Murray River Railway The Melbourne, Mount Alexander & Murray River Railway Company received parliamentary assent in February 1853 to build Victoria's first inland railway from Melbourne to Williamstown, and Melbourne to Bendigo and Echuca. Construction commenced in January 1854 with work on a pier at Williamstown but lack of funds slowed progress, eventually prompting the company to sell out to the government. The 100-mile (162 km) section to Bendigo opened in October 1862. Its cost of £35,000 per mile made it the most expensive railway ever built in Australia. In 1864, the line was extended to Echuca, tapping into the booming Murray-Darling paddlesteamer trade. info from Museums Victoria - Victorian Railways https://museumsvictoria.com.au/railways/theme.aspx?lvl=3&IRN=450&gall=456 1863 Ravenswood Station open on the 1st Feb 1863 Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Ravenswood Siding When the Victorian Railways were established in 1856 they adopted one of the popular British permanent way standards - heavy 80lb (36.3kg) double-headed rail held up right in cast iron chairs attached to transverse timber sleepers by wooden pegs called trenails. The Ravenswood Railway siding was constructed in 1862 with 12 feet wrought iron double-head rail held in cast iron chairs with Ransom and May patent compressed keys. Trenails held the chairs to the sleepers and the joints were secured in joint chairs. Joints were subsequently joined using fish plates. It formed part of the Melbourne to Echuca rail line, initially known as the Melbourne, Mt Alexander and Murray River Railway. George Christian Derbyshire, the first Engineer-in-Chair of the Victorian Railways was responsible for the design and construction of the works. No new lines were built in Victoria using double-headed rail after 1870. The siding was disconnected from the main line in 1988. The Ravenswood Railway Siding demonstrates the original 1856 philosophy of the Victorian Railways to adopt British permanent way technology. The siding demonstrates significant aspects in the development of permanent way technology in England and Victoria over the period from the 1830's to the 1880's. The chairs in the Ravenswood siding are physical evidence of early railway technology rendered obsolete 120 years ago, namely joint chairs at rail joints and trenails to secure the chairs to the sleepers. The double-headed rail demonstrates an important stage in the evolution of British rail technology in the 1830s. The old fish plates, square headed bolts and square nuts demonstrate the success of fishing the rail joins. The Ravenswood siding demonstrates the earliest form of rail joint technology developed in England, and existing in Australia, the joint chair. In part of the siding the sequence of joint and intermediate chairs is consistent with the 1856 specifications, that sequence is rare with the joints secured in joint chairs. The survival of chairs in this sequence is rare and almost certainly demonstrates that they remained in continuous use at the same location from 1862 to 1988. This remnant of the Ravenswood siding has survived 126 years. The siding has proved to be the most significant of extant remnant double-headed sidings in Victoria, containing a rare combination of early permanent way technologies. Construction dates 1862, Info from Ravenswood Railway Siding Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/4693/download-report The remaining section of this siding is significant at the State and National levels in that it demonstrates the use of chaired rail by the Victorian Railways Department for the Trunk Lines and, more particularly, the following stages in the evolution of this long obsolete method of permanent way construction: a) The use of joint chairs and intermediate chairs at regular intervals inferring that the original wrought iron rail lengths were 12 feet, as is known through documentary sources to have been the case. The survival of chairs in this sequence is unique and almost certainly demonstrates that they have remained in continuous use at the same location and in the same sequence from 1862 to 1988 . b) The use of joint chairs and intermediate chairs designed for use with trenails. c) The use of later intermediate chairs designed for use with steel pins and the use of fished joints with steel double head chaired rail, representing a second method of constructing the permanent way using chaired rail technology. info from Ravenswood Siding - Melbourne/Echuca Railway Line - Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/70103/download-report Addition to Citation for Melbourne to EchucaRailway Line 1/10/1990 Double Head Rail The surviving lengths of double head rail with chairs on this railway compare with one surviving similar remnant on the Geelong to Ballarat railway and are representative of permanent way construction techniques applied exclusively to the two trunk railways of the 1860's. In this respect they are rare survivors and may be unique at the national level and of technical importance at the international level to the extent that they enhance contemporary understanding of early railway building technology. Surviving lengths of chaired double head rail survive at Kyneton, Ravenswood and Bendigo on this railway and include a number of different types of cast iron intermediate and joint chairs with hardwood keys and metal pins. The Ravenswood siding is of special significance for the diversity of chair types and for the sequence of chairs recalling rail lengths known to be associated with construction of the line in 1862. Construction of the Railway Tenders closed on 24 March 1858 with no less than 133 tenders being received. A contract was let to Cornish and Bruce for £3,356,937 to commence work on 1 June 1858 and complete the line by 31 July 1861. Cornish and Bruce made quick early progress with the Melbourne to Sunbury section being officially opened on 13 January 1859. The line was officially opened to Bendigo (Sandhurst) on 20 October 1862 by the Governor of Victoria, Sir Henry Barkly. A great banquet was held for 800 guests and this was followed by a grand ball. The extension of the line to Echuca was a relatively simple matter as that part of the line was across plain country without any significant engineering challenges. Tenders were called for the work in 1863 and the work was completed in 1864 by contractors Collier and Barry Apart from the line contractors, other firms directly involved were J Shire law and Co (sleepers), R Fulton, Langlands Brothers and Co, William Crossley (water supply), B Moreland, Langlands Brothers and Co (platelayers lorries), E Chambers (iron pins, traversers), Miller and McQuinstan (luggage vans and steam engines) and various contractors for building works. Info from Engineers Australia Engineering Heritage Victoria Nomination for Recognition under the Engineering Heritage Australia Heritage Recognition Program for the Goldfields Railways - Melbourne , Bendigo & Echuca Railway Page 25 - .2.9.2 Statement from National Trust of Australia (Victoria) Listing number B5323 for Mt Alexander/Murray Valley Rail Line: Page 69 - Theme 3 https://www.engineersaustralia.org.au/portal/system/files/engineering-heritage-australia/nomination-title/Melbourne_%20Bendigo_Echuca%20Railway%20Nomination.pdf The Melbourne, Mount Alexander and Murray River Railway Company was a railway company in Victoria, Australia. It was established on 8 February 1853 to build a railway from Melbourne to Echuca on the Victorian-NSW border and a branch railway to Williamstown. The company struggled to make any progress and on 23 May 1856, the colonial Government took over the Company and it became part of the newly established Department of Railways, part of the Board of Land and Works. The Department of Railways became Victorian Railways in 1859. Construction of the Bendigo line commenced in 1858, but this private consortium also met with financial difficulties when it was unable to raise sufficient funds, and was bought out by the Victorian colonial government. The design work was then taken over by Captain Andrew Clarke, R. E., Surveyor-General of Victoria, with bridge designs completed by Bryson and O'Hara The contract for the first stage of the line from Footscray to Sandhurst (now Bendigo), was let to Cornish and Bruce for £3,356,937.2s.2d ($6.714 million) with work commencing on 1 June 1858. Completion of the permanent way was to be by 31 July 1861 https://en.wikipedia.org/wiki/Melbourne,_Mount_Alexander_and_Murray_River_Railway_Company Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Victorian Railways : report of the Board of Land and Works November 1862 GP V 1862/63 no. 21 (2.8 MB) https://www.parliament.vic.gov.au/papers/govpub/VPARL1862-63No21.pdfHistoric - Victorian Railways - Double Headed rail Ravenswood Railway Station and Siding Victorian Heritage Database Reports Victorian Heritage Register VHR H1100 Victorian Heritage Register VHR H1786 National Trust VHR H1100 Mount Alexander and Murray River Rail way Line National Trust2 rail lengths of Double Headed Rail made of Iron makers marks : Wilson & Cammell - Dronfield - Steel and 20 joint chairs with metal rail pins Makers mark Wilson & Cammell - Dronfield - Steel (possible date 187? very hard to read ) puffing billy, double headed rail, wilson & cammell - dronfield - steel works, ravenswood station siding, melbourne to echuca rail line, initially known as the melbourne, mt alexander and murray river railway.

BENWERRIN COAL COMPANY SKIP This quarter ton coal truck or skip was used at a small mine situated at Benwerrin near Deans Marsh in Victoria’s Otway Ranges. The mine first opened in 1899 and closed in 1904. With the fuel shortages due to World War 2, the Benwerrin Coal Company reopened the mine in 1941. The coal was loaded into skips and winched out of Box’s Creek valley on a narrow gauge incline to a loading point that was close to the Deans Marsh-Lorne Road. It was then taken by road to the Deans Marsh Railway station. The average gradient of the tramway was 1 in 4 over a length of just under 500 metres (1600 feet). The gauge of the tramway has often been referred to as 375mm (or 15 inches) as shown on the map opposite taken from “Sawdust and Steam”. However, actual measurements of the wheels show the gauge to be 400mm (or 16 inches), which is quite unusual as is the small size of the skip itself. The mine produced up to 30 tonnes of brown coal each week until it closed in 1949 and the incline tramway and its skips were abandoned. Preservation of this coal truck came as a result of interest by the Tramway Museum Society of Victoria (TMSV) in the Barlow or Box type rails that it ran on. These rails had originally come from the Beaumaris Horse Tramway and were obtained by the Benwerrin Coal Company from Hayden Bros’ abandoned timber tramway at nearby Barwon Downs. Members of the TMSV visited the mine in the 1960s only to find that most of the tramway had recently been recovered for scrap. There remained a significant number of relics around the mine adits including most of the skips. One of these remained in good condition and it was recovered for preservation in May 1967. It was restored but never displayed and a second restoration took place by the author over 2012/13 so that it could be placed in the Menzies Creek Museum where it was delivered in February 2013. Little remains of the mine today with trestles and sleepers destroyed in the “Ash Wednesday” Bushfires in 1983. References: Houghton, N (1975), Sawdust and Steam, Light Railway Research Society of Australia. Historic - Industrial Narrow Gauge Railway - Benwerrin Coal Company , Benwerrin , Victoria, AustraliaCoal Skip - made of Iron sheet and wrought iron frame & wheelsB,C.Co Melbournepuffing billy, coal skip, benwerrin coal company, narrow gauge

DH31 - DH59 Diesel Hydraulic locomotive Built to 3'6" gauge in 1970 this Diesel Hydraulic locomotive entered service for the Queensland Railways where it remained until withdrawn in 1994. Purchased by the E.T.R.B. in 1995, it was converted to 2'6" gauge in Queensland and transported to Belgrave in 1996 for overhaul. It re-entered service later in 1996, although instead of receiving a V.R. type classification & number and V.R. style livery, it retained its Q.R. number of DH59 and its Q.R. livery minus the Q.R. logo, but has since been repainted the traditional Blue & Gold of V.R. diesel locomotives and reclassified DH31. It has since been returned to DH 59. The DH class was a class of diesel-hydraulic locomotives built by Walkers Limited, Maryborough for Queensland Railways between 1966 and 1974. In 1966 Queensland Railways tested a Walkers Limited built diesel-hydraulic shunting locomotive. This was later purchased and by 1974 the 73 DH class locomotives had taken over shunting duties in most Queensland yards. They were also used on short distance freight services. With the closure of many freight yards and the move to longer trains withdrawals started in the 1980s. Many were sold for further use on Queensland sugar cane railways. Locomotive's Queensland Railways Service History : Locomotive : DH59 Serial No: 646 In Service : 19/05/1970 With drawn from Service : 20/05/1991 LOCOMOTIVE DETAILS DH class No. originally constructed : 74 No. in service : 2 No. stored : Wheel arrangement : Bo-BoDH Roadworthy weight : 40T Maximum axle load : 10T Tractive effort (85%) Length overall: 33' Height overall : 12' 6 1⁄2" Driving wheel diameter : 36" Date of manufacture :1970 Manufacturer :Walkers Place of manufacture : Maryborough, Queensland Locomotive type : Diesel Hydraulic DH Class Type Diesel-Hydraulic Introduced 1966 Number in class 73 Manufacturer Walkers Gauge Narrow (QR, MIM) 900mm (SECV) Axles B-B Length 11.1 m Mass 37 t Engine Caterpillar D355E Transmission Voith L42U2 Power 347 kW / 465 HP Tractive effort 114 / 82 kN Speed 50 / 10 km/hHistoric - Queensland Railways - Diesel Hydraulic locomotive DH59DH59 Diesel Hydraulic locomotive made of steel and metalDH59 Diesel Hydraulic locomotivepuffing billy, diesel-hydraulic locomotive, dh59, dh31, walkers diesel hydraulic, queensland railways

DH5 Diesel Hydraulic locomotive The DH class was a class of diesel-hydraulic locomotives built by Walkers Limited, Maryborough for Queensland Railways between 1966 and 1974. In 1966 Queensland Railways tested a Walkers Limited built diesel-hydraulic shunting locomotive. This was later purchased and by 1974 the 73 DH class locomotives had taken over shunting duties in most Queensland yards. They were also used on short distance freight services. With the closure of many freight yards and the move to longer trains withdrawals started in the 1980s. Many were sold for further use on Queensland sugar cane railways. Locomotive's Queensland Railways Service History : Locomotive : DH5 Serial No: 587 In Service : 27/08/1968 With drawn from Service : 7/07/1992 LOCOMOTIVE DETAILS DH class No. originally constructed : 74 No. in service : 2 No. stored : Wheel arrangement : Bo-BoDH Roadworthy weight : 40T Maximum axle load : 10T Tractive effort (85%) Length overall: 33' Height overall : 12' 6 1⁄2" Driving wheel diameter : 36" Date of manufacture :1970 Manufacturer :Walkers Place of manufacture : Maryborough, Queensland Locomotive type : Diesel Hydraulic DESCRIPTION - B-B DH FORMER CLASS AND NUMBER - 8/1968 Built By - Walkers, Maryborough, Queensland Service History Date built - 1968 Original owner - Queensland Government Railways Original gauge - 1067mm Withdrawn - Next owner - State Electricity Commission of Victoria DH5 8/1968 Sold to SECV as CC2, In service 8-1993 Sold to Mackay Sugar CC02 (Ex DH5). CC02 was purchased by Cooks Construction in 1992 and used on the 900mm Yallourn railway in Victoria. Mackay Sugar purchased in 2001. Title Value Status Preserved - Operational Gauge Narrow 2ft 6in (762mm) Owners Puffing Billy Railway Operators Puffing Billy Railway Manufacturer Walkers Ltd - Maryborough, Queensland Builders number 587 Associated locos Renumbered from CC02 Liveries carried VR Blue & Gold Puffing Billy Service History or Notes Date acquired - 2008 Acquired from - Mackay Sugar Mill ? State when acquired - Operational ? Work done - Regauged, overhauled Restored to service - Current State - Operational Historic - Queensland Railways - Diesel Hydraulic locomotive DH5DH 5 Diesel Hydraulic locomotive made of steel and metalDH 5puffing billy railway, dh5, locomotive, cc02, diesel,, queensland railways, diesel hydraulic locomotive dh5, walkers diesel hydraulic

Team Road Races were a popular feature of club cycling in the Western District of Victoria during the second half of the 20th century. The shield was initiated by the Camperdown cycling club to record team winners of the races held between the clubs in the Western District of Victoria. This shield has an important place in the history of cycling in the Western District of Victoria. A large wooden shield with silver coloured plated plaques containing inscriptions of team winners of road races in the Western District of Victoria. There is a smaller shield in the centre of the shield depicting a cyclist and above and below this are banner like plaques with inscriptions on them. Many of the inscriptions have worn with age. "Perpetual Shield/Ian Davis - Gift Specialist/Camperdown .... CycleClub/Annual Western District/Teams Championship/1948/Terang ACC/No1 Team/1949/Terang ACC/No 1 Team/1950/Warrnambool ACC/No1 Team/1951/Warrnambool ACC/No1Team/1952/WarrnamboolACC/No1Team/1953/Sebastopol/ACC/1954/Sebastopol/ACC/1955/Geelong/No1 Team/1956/Camperdown ACC/1957/Sebastopol/No1 Team/1958/Geelong ACC/No1 Team/1959/Warrnambool ACC/No1 Team/1960/Geelong ACC/No1 Team/1961/Camperdown ACC/No 1 Team/1962/Geelong Camperdown/No1 Teams/ Equal/1963/Camperdown ACC/No 1 Team/1964/Geelong ACC/No 1 Team/1965/Geelong ACC/No 1 Team/1966/Geelong ACC/No 1 Team/1967/Geelong ACC/No 1 Team/1968/Geelong ACC/No 1 Team/1969/Geelong ACC/No 1 Team/1970/Geelong ACC/No 1 Team/1971-1976/inscriptions faded/1977/Warrnambool ACC/No1 Team/1978/Warrnambool ACC/No1 Team/1979/Geelong/N. Wilson/Godfrey/MacAuley/Hose/1980/Geelong/Inscriptions faded/1981/Geelong/G. Williams/N. Williams/D. Libbis/C. Judd/1982/Geelong/G. Williams/R. Bush/ P. Macauley/I. Wood/1983/Colac/P. Forster/P. Rippon/P. Taylor/D. Lunn/1984/Ballarat/Sebastopol/P. Taylor/M. Leverett/D. Keirl/1985/Geelong/D. Williams/G. Fitsimmons/B. Crane/L. Clinnick/1986/Colac/D. Lunn/C.Caspon/D. Allan/P. Jannsen/1987/Geelong/G. Williams/P. Macauley/B. Crane/D. Fitzsimmons/1988/.../1989/.../1990/Colac/C. Cashin/D. Forster/L. Nogera/S. Cropley/1991/Colace/C. Cashin/J. Stirling/S. Cropley/1992/Geelong West/D. Whitford/D. Wilson/P. Evans/M. Varker"perpetual shield; ian davis; annual western district teams championship; terang acc; warrnambool acc; sebastopol acc; geelong acc; camperdown acc; wilson; godfrey; macauley; hose; g. williams; n. williams; d. libbis; c. judd; r. bush; p. macauley; i. wood; colac; p. forster; p. rippon; p. taylor; d.lunn; ballarat; sebastopol; p. taylor; m. leverett; d. keirl; d. williams; g. fitsimmons; b. crane; l. clinnick; d. lunn; c.caspon; d. allan; p. jannsen; p. macaule; b. crane; d. fitzsimmons; c. cashin; d. forster; l. nogera; s. cropley; c. cashin; j. stirling; d. whitford; p. evans; m. varker;

A chronicle of officials of the G.C.C. during 1909. This honour board has an important place in the history of the Geelong Cycling Club and signifies the high esteem in which the community held cycling in the early part of the 20th century. Decorative wooden frame around individual photographs on oval ceramic plates and mounted on a wooden background. These are surrounded by pressed metal floral decorations. Inscriptions are in cursive script and painted in blue and white against the wood. There is a gold trim to the wooden frame. "Geelong Cycling Club/R McGann/T. Jenkins/H.H. Barclay/C. Hobbs/A. Beaming, Club Trainer/C. Hudgell/G.A. Martin, Vice Capt/H.G. Cartriss, Captain/E.Kitchen, ICCA Delegn/W.C McEwan/C. Bartlett/B. Freedman,Auditor/Eli Phillips, President/H. Groves, Handicapper/A. Hyatt/H.W. Heath/J. MacPhee/J.McMahon/C. Farrell/C.A.Betts, Hon. Secretary/O. Rowlands/M. O Donnell, Com/J.Kilmartin/C.E.Hewitt, Treasurer/E.Walsh, Com/N.James, Com/G. Martin/H.Mills/L.Redman/A.Palmer/W. Loone/H.L. Kelly/W. Shields/R.Hobbs/Presented/Mr. Charles A. Betts/A token of esteem for valuable services rendered as secretary/Nov 9, 1909” geelong cycling club; r mcgann; t. jenkins; h.h. barclay; c. hobbs; a. beaming; c. hudgell; g.a. martin; h.g. cartriss; e.kitchen; w.c mcewan; c. bartlett; b. freedman; eli phillips; h. groves; a. hyatt; h.w. heath; j. macphee; j.mcmahon; c. farrell; c.a.betts; o. rowlands; m. o donnell; j.kilmartin; c.e.hewitt; e.walsh; n.james; g. martin; h.mills; l.redman; a.palmer; w. loone; h.l. kelly; w. shields; r.hobbs; mr. charles a. betts;

A chronicle of Life Members of the G.A.C.C. during the mid 20th century. Note that cyclists of international acclaim - notably Russell Mockridge, Sir Hubert Opperman and Don Wilson are included in this list.This honour board has an important place in the history of the Geelong Amateur Cycling Club and signifies the high esteem in which the community and the GACC held for the significant contribution many members made to the club. A mahogany coloured wooden board in a rectangular shape with a decorative top and gold lettering providing the names of the Life Members of the GACC at that time.“GACC/Life Members/Crowley G/Foster F/Ross HJ/Beaton A/Holliday RS/Henshole Mrs/Henshole LD/McPherson A/Butterworth A/ Long HA/Mullany S/McMurrich RP/O'Dwyer T/Ward HR/Mockridge RG/Jones S/Mumford J/Lockwood EJ/Coster B/Reed J/Finn CH/Hine RJ/Opperman H/McDermott P/Johnston RA/Lee J/Rodgers NA/Jordan R/Wilson D/Wood R/Neagle M/Robertson P/Clarke G/Buckwell R/Osborne H/Presented by/J Reed & J Hunt" gacc; life members; crowley g; foster f; ross hj; beaton a; holliday rs; henshole mrs; henshole ld; mcpherson a; butterworth a; long ha; mullany s; mcmurrich rp; o'dwyer t; ward hr; mockridge rg; jones s; mumford j; lockwood ej; coster b; reed j; finn ch; hine rj; opperman h; mcdermott p; johnston ra; lee j; rodgers na; jordan r; wilson d; wood r; neagle m; robertson p; clarke g; buckwell r; osborne h; j reed; j hunt"

Photograph of Australian crew J W Scott, Ballarat, G E Erikson, Balmain, A R T Boys, Dulwich Hill Sydney, C E Adair, Swan Hill, B R Jones, Wyandra, J H Wilkinson, Rutherglen, E L Tull (RAF) and K G Campbell of Willoughby taken prior to a raid on Berlin on the night August 31. From collection of photographs and cuttings dedicated to the memory of WILKINSON JOHN HUDSON : Service Number - 400444 : Date of birth - 18 Feb 1914 : Place of birth - RUTHERGLEN VIC : Place of enlistment - MELBOURNE : Next of Kin - WILKINSON HUDSON. Wilkinson was awarded the distinguished flying cross in March 1944 and tragically killed in action over Germany also in 1944. See also 237 and 240. Newspaper cuttingpilot, kia, killed in action, dfc, distinguished flying cross, wwii, world war two, air force

Photograph depicting the official Unveiling of Soldiers Memorial at Wangaratta on 25th of April, 1923.From the History of Wangaratta RSL.. In 1918 there were two aims a) to organise a club for returned men and b) erect an outstanding war memorial in a beautiful garden setting. It took many years before the erection and unveiling of this memorial which took place on Anzac Day 25th April, 1923.Black and white photograph of large number of people sitting and standing around monument.Unveiling Soldiers Memorial Wangaratta 25.4.23soldier's memorial wangaratta, unveiling 1923

Brown cloth covered, bound, 304 pages, b&w photos and textThis Book published to keep before teachers and children examples of service and sacrifice in a great cause, is to be presented to the Traralgon School. It should be kept in an honoured place as a source of guidance and inspiration for successive generations.great war, wwi, victoria, traralgon, war service recors, education department victoria, teachers, enlistments, honors, decorations, deaths.

Robin Boyd developed a close friendship with the founder of the Bauhaus in Weimar Germany, Walter Gropius, who had moved to the USA in the 1930s. Through this connection, Boyd was invited to be the Massachusetts Institute of Technology (MIT) Bemis Professor at the School in the North American academic year 1956-7. Robin and Patricia Boyd, with their youngest daughter Suzy, were based in Cambridge, Massachusetts for the year. Boyd gave some lectures at MIT and he was also invited to give lectures at many other universities, allowing him to travel widely within the USA, especially on the East Coast. This gave him the opportunity to meet architects like Frank Lloyd Wright, Eero Saarinen, Paul Rudolph and many others, and visit the offices of Skidmore, Owings and Merrill, and places like Taliesin and the General Motors Technical Center Detroit. On the way home, the Boyds visited London, Berlin, Paris and Le Corbusier’s Ronchamp Chapel in France. MIT Bemis Professorship, MIT, robin boyd, slideColour slide in a mount. Gropius House, Lincoln, Massachusetts, USA. (Architect: Walter Gropius.)Made in USA / Patented / 04819 / Top (Handwritten) / B (Handwritten) / Encircled 6 (Handwritten)mit bemis professorship, mit, robin boyd, slide

Robin Boyd developed a close friendship with the founder of the Bauhaus in Weimar Germany, Walter Gropius, who had moved to the USA in the 1930s. Through this connection, Boyd was invited to be the Massachusetts Institute of Technology (MIT) Bemis Professor at the School in the North American academic year 1956-7. Robin and Patricia Boyd, with their youngest daughter Suzy, were based in Cambridge, Massachusetts for the year. Boyd gave some lectures at MIT and he was also invited to give lectures at many other universities, allowing him to travel widely within the USA, especially on the East Coast. This gave him the opportunity to meet architects like Frank Lloyd Wright, Eero Saarinen, Paul Rudolph and many others, and visit the offices of Skidmore, Owings and Merrill, and places like Taliesin and the General Motors Technical Center Detroit. On the way home, the Boyds visited London, Berlin, Paris and Le Corbusier’s Ronchamp Chapel in France.Colour slide in a mount. 660 Fifth Avenue, New York City, New York, USA, 1957. (Architects: Carson and Lundin.)Made in USA / Patented / 04819 / B (Handwritten) / Encircled 15 (Handwritten) / Encircled 21 (Handwritten)mit bemis professorship, mit, robin boyd, slide

Robin Boyd developed a close friendship with the founder of the Bauhaus in Weimar Germany, Walter Gropius, who had moved to the USA in the 1930s. Through this connection, Boyd was invited to be the Massachusetts Institute of Technology (MIT) Bemis Professor at the School in the North American academic year 1956-7. Robin and Patricia Boyd, with their youngest daughter Suzy, were based in Cambridge, Massachusetts for the year. Boyd gave some lectures at MIT and he was also invited to give lectures at many other universities, allowing him to travel widely within the USA, especially on the East Coast. This gave him the opportunity to meet architects like Frank Lloyd Wright, Eero Saarinen, Paul Rudolph and many others, and visit the offices of Skidmore, Owings and Merrill, and places like Taliesin and the General Motors Technical Center Detroit. On the way home, the Boyds visited London, Berlin, Paris and Le Corbusier’s Ronchamp Chapel in France.Colour slide in a mount. Annie Pfeiffer Chapel (1941) at the Florida Southern College, Lakeland, Florida. USA. (Architect: Frank Lloyd Wright.)Made in USA / Patented / 04819 / B (Handwritten) / Encircled 21 (Handwritten) /mit bemis professorship, mit, robin boyd, slide

The Wesleyan Church, Denham Street in Lower Hawthorn, as the area was then called, was opened on 2 May 1886. The building was designed by Geelong architect William Henry Cleverdon and was built of brick in the Gothic style. Its dimensions were 55 x 33 ft and the façade incorporated a rose window and spire 50 ft high. A wooden vestry was placed to the rear. The building and the organ were seriously damaged by fire on 1 April 1970, started by a painter's blowtorch. The church was not rebuilt. The organ was built in 1900 by E. Cornwall Cook, of Barrington Place, Burwood Road, Hawthorn. It was opened on 8 August 1901 by George Peake. The Swell strings may have been added (or substituted for earlier material) by Frederick Taylor, whose workshop was nearby in Burwood Road. At some stage the colourfully decorated façade pipes were repainted in a gold finish. The organ was badly damaged in the 1970 fire and the metal pipes were sent to Hill, Norman & Beard who melted them down for scrap.B & W photograph of the interior of the Denham St. Methodist Church, Hawthorn. Mounted on card.denham street methodist church, organ, hall, e. cornwall cook, george peake, norman & bead, frederick taylor

maps, b&w photographs, word lists, document reproductions