One page foolscap size typed (carbon copy) instruction sheet titled with Questions and Answers for Acting Inspectors. Dated 28/6/1966. Asks 9 questions of a varied nature Asks questions re duties, derailments, track obstructions, ticket irregularities, pedestrian accidents, traffic, drunken crews, passenger complaints conductor honesty.In black ink in top right hand area of instruction, "Acting Inspector 1966 / 28th June", "BTPS 324." Changes to question 1 - additional sub-question and answers. trams, tramways, sec, instructions, traffic staff, inspectors, accidents

Yields information about the distribution of the SEC tramway by-laws to workers in 1950.Carbon copy of memo on white demi foolscap paper dated 22/8/1950 to the Manager Ballarat, regarding forwarding 100 copies of the new By Laws. Has ink notes dated 19/9/1950. Note in Margin about similar letter to Ballarat, Bendigo and Geelong. Has date stamp of 24/8/1950.trams, tramways, by laws, sec

Yields information about the correspondence that was sent to the City of Ballarat from the SEC about underground services under tram tracks.Carbon copy of a letter on quarto green paper (2 sheets) dated 1/4/1937 from the Ballarat SEC Manager to Mr. L. H. Finch, City Engineer, City of Ballarat regarding installation and servicing of pipes and services under the tram tracks, asking him for his assistance and enclosing a set of application forms.Has initials of Manager and one other on page 2trams, tramways, letters, sec, tram track, city of ballaarat

Yields information about the correspondence that was sent from Ballarat from Geelong about underground services under tram tracks.Carbon copy of a letter on demi foolscap green paper (1 sheet) dated 24/5/1937 from the Ballarat SEC Manager to the Managers ES of Geelong and a copy to the Ballarat ES, forwarding correspondence regarding installation of services under tram tracks. Titled "Crossing Under Tramway Tracks", notes who received the documents locally.Has various initials and a note in ink "copied now Bendigo procedure"trams, tramways, letters, sec, tram track, geelong

Carbon copy of a letter to the Chief Engineer of the MMTB 16 August 1935 from the Council of Scientific and Industrial Research (CSIRO) about the durability of various species of Eucalypti woods. Discusses service life, sleeper supply, pinus radiate sleepers in Adelaide, and further research work. Signed by Stanley A Clarke, Acting Chief Division of Forest Products.trams, tramways, mmtb, sleepers, trackwork, csiro

Colour photo. Taken at BRIT Small piece of paper attached to bottom of photo reads: Analytical Chemistry Lab. 1970 Semi Micro Analysis, Peter Ellis doing 'dryway'analysis Using a blowpipe and carbon block. (Strappo Eddy, ''don't did a hole big enough for a cow to calve in! '') Water pump for vacuum filtration immediate right.person, individual, peter ellis oam

A letter to Deputy Prime Minister Doug Anthony inviting him to speak at Legacy and his replies that he couldn't commit at that stage, the notations were updates on further contact with him to try and finalise a date. Legatees met regularly and had guest speakers to entertain and inform on different subjects at their Tuesday Luncheons. These documents was from a file of information about guest speakers (see also 00812-00822 and 00829-00837). The Programme Committee was responsible for organising the speakers. A record that the speakers at Legacy functions were from very different walks of life and the subjects varied.00819.1 White foolscap letter from J.D. Anthony of Parliament of Australia on House of Representatives letterhead. 00819.2 Green quarto copy paper, black type, carbon copy of letter to J.D. Anthony Deputy Prime Minister with notations in pencil and pen. 00819.3 Off white letter from J.D. Anthony, Leader of the Country Party on letterhead.Notations in blue and black ink..speakers, programme committee, correspondence

Set of about 80 typed, carbon copy of the "Ton Mileage Returns" and "Car Mileage Returns" for c1927, 1928 and the 1948 to 1952, not in date order. Lists the class of tram operation, car numbers, number of cars, weight in tons, total miles run and av miles per car for both passenger and non-passenger cars.trams, tramways, tramcars, mileages, reports, lists

Report - carbon copy of 1 quarto sheet on blue paper from the Controller of Stores to the Deputy Chairman dated 7/9/1960, titled "Flags for display on trams" giving details of the purchase of Australian blue Ensigns, costs and that the Board is committed to flying 650 flags for Royal Agricultural Society. Approval was sought to purchase another 100.trams, tramways, flags, royal show, stores department

Single foolscap sheet - carbon copy listing the single truck tramcars disposed of by the MMTB since 1959 - gives tramcar number, whether sold or stored, date and notes on disposal - where located. Also provides lists of other MMTB tramcars that were located within Victoria. Probably prepared as the same time as Reg item 362.trams, tramways, tramcars, mmtb, lists, sale of trams, disposal

Handwritten carbon copy of list of equipment purchased by the Bendigo and District Tourist Association including winding engines, cylinders, air compressor, bailing tank, safety cage and other mining equipment. Equipment came from Ron Barker, Rex Archbold and Geo. Holt. Also mentioned is Harry Archbold. Notes prepared by Albert Richardson.mine, gold, victoria hill, victoria hill, equipment purchased by bendigo and district tourist associations, walkers limited maryborough foundry qld, central nell gwynne, mr miles lewis, ron barker, rex archbold, geo holt, harry archbold, a richardson

4 page flimsy carbon copy of a typed report on the Nell Gwynne Gold Mining Company NL, dated 29.9.1948. Author K.F. Heinze, Mine Manager, Robert Bentley. Introductory comments: 'shaft sinking was commenced at a point 40 feet below the 1,560 feet plat'. Report includes financial details of mining costs.bendigo, mining, central nell gwynne gold mining co

In 1942, the expansion of the war into the Pacific expanded wartime operations in Australia and some of the RVIB buildings were comandeered for house military staff. This plan, drawn up in March 1942 by J.G. and authorised by the Superintending Architect and (W. Dale)Works Director Air Services show the layout of the main building at 557 St Kilda Road as well as that of the babies nursery. Doorways, cupboards and stairwells are annotated in this carbon copy, as well as the layout of Ormond Hall.1 architectural plan of St Kilda Road layoutmyer house, royal victorian institute for the blind, plans, raaf

This is a standard British Army Pigeon Service Message Book which was issued to Australian Army units during World War One. This Pigeon Service Message Book has no known local provenance but it is a very interesting memento of World War One.This is a British Army Pigeon Service Message Book which consists of a number of sheets of paper stapled into a cardboard cover protected with black leatherette. The writing on the front cover is stencilled in white. The ends of the cover are held together by a black elastic strap. The strap has now lost its elasticity. Inside the front cover is a printed sheet indicating the use of the book and the care of the pigeons. There are two leatherette tubes attached to the back cover which would have held writing implements. The book material consists of a top sheet printed with space for the message details, and sheets of carbon paper for two copies of the message. There is a piece of cardboard backing the carbon paper. None of the message pages has been used. The staples have rusted and the sides of the paper material are stained. The cover is a little crumpled and dirty. ‘Army Book 418’ ‘Pigeon Service Message Book’ world war one, british army pigeon service message book

Yields information about the tramcar maintenance activities of the SEC at the depot in frequency of changing brake blocks, light bulbs, trolley rope and wheels for each tramcar. This book was the last to be done by the SEC in Ballarat, closure occurred on 19/9/1971.Collins Diary No. 324, blue Rexene covers, sewn sections with ruled sheets providing a diary for 1971, 7 days and notes for each double page. Has "useful information" sheets at from the diary. Used by the SEC Ballarat depot to record brake block changes and light globe replacements on each tramcar. Also gives details on trolley rope and trolley wheel replacements. The last recorded entry was 14/9/1971, for fitting of second hand shoes to 34 and 42. Inside front cover were: 1 - loose - carbon copy of a "Notice to All Traffic Staff" regarding braking - See Reg Item 3520. 2 - loose - carbon copy of run number 25, Monday to Friday - See Reg Item 3521. These are to be retained with the item, but in a separate container.tram, trams, sec, ballarat, depot, brake blocks, trolley wheels

List within a manila document file containing: 1 - Letter, carbon copy, to Hon G. L Goudie - Minister of Public Works, forwarding a list of the Motor Bus and Motor Cab Routes in the Metropolitan Area, dated 29/11/1938 - set of three blue quarto sheets pinned together. 2 - Letter from the Secretary of the Department of Works C.C. Gale acknowledging receipt typed on quarto paper. 3 - Bound set of the list - carbon copy listing each route, description, and its impact on the tramway or railways and whether it duplicates other routes or is redundant. Approx 100 foolscap sheets stapled with brown cardboard binding strips on the left hand side. See also Reg Item 2602 for a similar 1930 listing.trams, tramways, regulations, mmtb, tramways, buses

Most were used in various capacities at Ballarat School of Mines or University of Ballarat.Assorted lamps including Edison Carbon filament light bulbs and other special purpose lamps, .1-3) Robertson, pear shaped 220 V 16, carbon filament? bayonet light bulb with 'nipple'. .4) Ediswan, standard shaped, 928, carbon filament? bayonet light bulb with 'nipple'. .5) (B in a circle) 280 V 32 oo1A, pear shaped, carbon filament? bayonet light bulb with 'nipple'. .6-7) Crompton? standard shaped, carbon filament? bayonet light bulb. Clear glass with an amber tint. .8) 230-240 V 40 W, pear shaped, wire filament bayonet light bulb. .9-10) Osram standard shaped, heavy spiral and disc electrodes, bayonet light bulb. (The disc is loose in 10) .11 a&b) Osram black glass, large standard shaped, 230-240 V 125 W, bayonet light bulb. .12) Philips tubular shaped projector lamp with instruction leaflet. .13) Philips tubular shaped projector lamp with instruction leaflet in original box. .14) EH JA 12 V 55 W small projector lamp. .15) Large special purpose, standard shaped, frosted bayonet light bulb. .16) Siemens, standard shaped, modern Edison screw light bulb. .17) Philips, standard shaped, modern Edison screw, frosted light bulb. .18) Crompton, gas filled 240 V 75 W, standard shaped, bayonet frosted light bulb in original box. .19) Crompton, gas filled 230 V 300 W. standard shaped, large modern Edison screw light bulb. .20) Probably an extension cord with a bayonet fitting at one end connected by a twisted cord of two fabric covered wires to a large socket. This socket has a copper Edison screw inner, surrounded by a ceramic tube and covered with a copper housing. The housing is cracked in two places.Some have makers brand and voltage and wattage stamped onto the glass.scientific instrument, ballarat school of mines, globes, edison, lamps, light bulbs, bayonet

The Philips Company was founded in 1891, by Gerard Philips and his father Frederik Philips in Holland (Netherlands) and started the production of carbon-filament lamps and other electro-technical products in 1892. The first Philips shaver was introduced in the 1930s, and was simply called Philishave. The Philishave has remained part of the Philips product . In 2018, the independent Philips Lighting N.V. was renamed Signify N.V. However, it continues to produce and market Philips-branded products such as LED light bulbs After World War 11 1939-45, new estates were opened for housing returned soldiers in City of Moorabbin and most of the men began using the new convenient electric razors manufactured by Philips and Gillette.An electric shaver 'Philishave' c 1950 with box, shaver head protector, electrical cord and plug Box ; PHILI SHAVE / PHILIPS Trademark Shaver :PHIL / SHAVE / AW / 209230V 4030 / AC ONLY / RTM / PHILLIPS / MADE IN / AUSTRALIApersonal effects, razors, electric shavers, philips pty ltd,, early settlers, city of moorabbin, post world war 11 settlement, bentleigh, highett, cheltenham, ormond, reed george, clark judy

Windlass, an ISO accredited sword maker and official supplier to MOD UK and the RN.good example of Navy cutlass swords2 x British Naval Cutlass 1804 - Chromed These highest quality blades are manufactured by Windlass, an ISO accredited sword maker and official supplier to MOD UK and the RN. Each blade is fold forged from a single billet of high-carbon steel, then hardened and tempered. Hand assembled and ground, each is then fully chrome plated for a mirror finish. 1. Blade near the hilt has on one side crossed sword and scabbard, obverse has a J. On the basket are N an arrow WD followed by an L. 2. Blade near the hilt has on one side crossed sword and scabbard, obverse has a inscribed 9 and stamped C6. On the basket are N an arrow WD followed by an L.navy, cutlass

Richard Squire was a student at the Ballarat School of Mines In 1905 Richard Squire was manager of the West Berry Consols at Allendale, and developed an improved system of mine ventilation, which was supported in "The Age." He was successful in combating and remedying the gas and ventilation troubles of the Deep Mines of Creswick and Allendale Districts after all had failed. MINE MANAGERS’ ASSOCIATION. Ballarat Branch. ... Mr R. B. Squire, manager of the West Berry Consols, at Allendale, submitted a paper detailing what he had done tor the betterment of ventilation in the alluvial mines of Smeaton and Mary borough districts- Members gave Mr Squire every credit for the results that he claimed to have effected; the adoption of his ideas had testified to their value to mine-owners. It was painted out, however, that for want of a thorough debate of the subject with experienced men the author had unwittingly included some general statements that required modifying in some points and extending in others, in justice to other workers among the earlier and the present day managers of mines. It was decided to invite the author to meet a sub-committee on this subject!Handwritten diaries of Richard Squire .1 1893 Diary with notes and figures .2 1894 Diary with notes and figures mostly unused .3 1898 Diary with notes and figures partly unused .4 1899 Diary with notes and figures partly unused .5 Carbon book of letters written with blue binding on spine .6 1917 Diary with notes and figures .4 Mt Mercer GM Coy written on front cover diaries, richard squire, letters, mt mercer, australian rough diaries

Demonstrates aspects of the Ballarat Tramways crewing arrangements, when standby's were available to cover crews who did not report in or left early or unavailable or running late. Allowed the inspectors to know when crews were available to cover late running etc. Produced for the Sept. 1966 rosterLarge format carbon copy typed sheet - titled "Stand by" dated 29th August 1966. Gives Run and time along the top heading and then broken up into each run for Weekdays, Saturdays and Sundays showing in a line chart form the standby times for each run, including conductors. Shows starting and finishing time of each standby shift.In the top right hand corner " BTPS 812" in black ink.trams, tramways, rosters, crews, stand by, ballarat, timetables

Top copy of an carbon backed sheet of paper titled "Unpaid Fare Notice", for use on a Tram/Bus providing details of an unpaid fare such as date, persons name and address, signature and conductor's or bus driver's name. Printed on light blue paper. Does not have a MMTB name on the document - note the different type of form on Reg Item 224.trams, tramways, mmtb, fares, tickets, forms

Established in 1906, Frank Moore soon became well known amongst discerning tradespeople for the quality & accuracy of his tools. The Company was acquired by John Shaw & Son in 1945 & James Neill & Co in 1970. Currently part of the Bower Meteorology UK Group, they still produce superb tools & measuring instruments in Sheffield. The subject item is made from high-grade carbon silver tool steel with the patented 'Firm Lock' joint, that identifies the maker as Moore & Wright.A tool used for external measurement of items made by a maker who patented the "firm lock" jointing system now used on many different types of tools in many different industries. These items are now collectible and quite rare as a result are sought by tool collectors in the USA and UK.‘Firm Joint’ external measuring calipers believed made by Moore & Wright. Impressed into the metal "L A J S" (Probably the owner and company that used the item nothing to do with manufacturing) flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, calipers, callipers, external calipers, outer caliper, pottery tools, masonry tools, glass making tools, external measurement

The Australasian Institute of Mining and Metallurgy (The AusIMM) was founded in 1893 and provides services to professionals engaged in all facets of the global minerals sector. With a focus on providing leadership and opportunities to minerals industry professionals, the AusIMM delivers an ongoing program of professional development services to ensure our members are supported throughout their careers, enabling them to provide high-quality professional input to industry and the community. in 2015 The AusIMM represents 14 000 members drawn from all sections of the industry and supported by a network of branches and societies in Australasia and internationally. (http://www.ausimm.com.au/content/default.aspx?ID=94, accessed 09 September 2015).1) Typed letter on letterhead from the Australasian Institute of Mining and Metallurgy to to the Ballarat School of Mines from B.E. Jacka, Secretary. The letter relates to the application for admission to the Institute from Robert Frederic Murrell who received a Diploma at the Ballarat School of Mines in 1962. .2) Carbon copy of a typed letter from Harold J. Trudinger, Principal of the Ballarat School of Mines. ausimm, australasian institute of mining and metallurgy, b.e. jacka, harold trudinger, robert f. murrell, ballarat school of mines, mining

Copy of a letter, dated 20 February, 1937, to Stephens Garage from Gordon Gray. He details the operation of his car after the installation of Scale Buoy. He mentions Water, Oil and petrol consumption. Also mentioned is carbon and exhaust. He also mentions that he used Super Plume Petrol and since the installation of 'Scalebuoy' he then used Plume Petrol.sciences, instruments - general, scalebuoy, bill ashman collection - correspondence, stephens garage, super plume petrol, plume petrol, gordon gray

Carbon copy of a typed letter to Mr. L. Taylor, dated 18/8/57. Letter recommending the Hand Shaker Unit supplemented with the Vest Pocket Unit . The Vest Pocket Unit is OK for table use. Note at the top of the page mentions a typical reply from Frank Stevenson where he recommends the hank Shaker Unit supplemented with the Vest Pocket Unit.sciences, instruments - general, scalebuoy, bill ashman collection - correspondence, frank stevenson, mr l taylor, mrs paynter