Wendy Blackburn was in charge of T.A..F.E. Orbost and the photographs were taken in her office. Also in the photographs are Tracey Barnett, Peter Cook and Dan Osborne. The Orbost Education Centre is a community based not-for-profit local organisation. It has been in operation since 1976. The programs respond to the needs of the community and short courses are delivered throughout the year for people of all ages and backgrounds. The basis is promoting learning, connectedness and belonging. It is supported by funding from the community, state government and non-government organisations. TAFE offered adult education to those new out of school and mothers coming out of motherhood as well as others. These photographs are pictorial records associated with adult education in Orbost.Five black / white photographs related to adult learning in Orbost. education-adult-orbost t.a.f.e.-orbost

August Meeting (Newsletter No. 235, Aug. 2017) Blanche and Jack Shallard were involved in many activities in the Montmorency community throughout their lives. They observed Were Street grow from a one shop street to a bustling shopping village. Jack was a local solicitor and on the Board of the Diamond Valley Community Hospital, while Blanche was a member of the Hospital Auxiliary and both were involved with our Society. They were also connected with Montmorency State School and St Faith’s Church in Montmorency. At this meeting we are pleased to have their daughter, Professor Margaret Deighton, speak about her family and her recollections of growing up in Montmorency.0:47:43 duration Digital MP3 File 67 MB audio recording, eltham district historical society, margaret deighton, meeting, montmorency, shallard, society meeting

Following the closure of the RAAF Air Base after the Second World War an auction sale was held. Mr Goldsworthy, mechanic and garage owner of Kaniva purchased the clock and hung it on the wall of the garage where it remained when the business was sold to Mr Eddy Rowe of Kaniva. The clock remained in action until the 17th October 2009 when Mr Rowe disconnected the power supply to the clock, and donated it to the Nhill Aviation Heritage Centre (NAHC) to be kept as memorabilia of the Second World War. On completion of the building of a new hangar/exhibition centre at the Nhill Aerodrome, the clock will be hung on the wall and once again connected to the power supply.Clock was used at the air school at Nhill during WW224 hour electric wall clock with Telechron brand on face. It has a pair of hour hands, one red one black and a black minute hand and second hand. A domed shaped Perspex front. The clock face has 24 hour markings. The glass and clock face are set within a steel frame.The clock has Telechron and twenty-four hour numbers written on the clock face. Pasted on the back side is "instructions for setting the clock which is marked WARREN TELECHRON COMPANY/Ashland Mass. U.S.A world war two, clock, electric clock,twenty four hour clock, nhill aerodrome, raaf air base, warren telechron, goldsworthy, eddy rowe

These trousers are from the Light brigade, and therefore would have an interesting history and research value. If this item was attached to other items connected to the wars,WW1, WW2, it could good interpretive history. Unfortunately we do not know who they belonged to, but since they were donated to the UC op shop it may be a local person in the Kiewa Valley. Jan 2013 - We have just found out these trousers are infact from the German Army from WW1 and would have been brought back home by one of local soldiers who were in the light horse, which a few men from Tawonga served in.If this item was donated by a local person, this would make it very signfigant due to attached social history about that person. Therefore significance would be, historic, re light brigade history, and the German Army, since we now know these are German Army pants. Research value as above. The period of this item, WW1 would make it rare, and since the item is in good condition, gives it good interpretive capacity.Grey wool riding breeches army issue KMV - 1 Private, Ex (in red) 72 in purpletrousers, pants, light- horse-brigade, germ.an army. ww1

This design was modelled on Queen Victoria's nursery bottles and would have been in use during mid 1880s to the early 1900s. This item is very similar to the Alexandra Feeding Bottle featured in the Maws catalogue of 1868. It was named after the then Princess Alexandra of Wales, later Queen Alexandra. This model had a glass stopper and a long rubber tube which connected at one end to a teat and to a glass tube at the other. The fittings were very difficult to clean and would hold milk particles, making them a breeding ground for the formation of bacteria. Sterilisation of feeding bottles by boiling, and boiling of milk and water, were not practiced effectively at this time.Globular shaped feeding bottle embossed with a crown on the upper surface. Next of bottle fitted with a glass thread. Writing imprinted on front of bottle, inside a ring, reads "THE VICTORIA FEEDING BOTTLE". The bottle has a flat shaped bottom to allow it to balance on a surface while being used."THE VICTORIA FEEDING BOTTLE"infant feeding, infant care

The first all transistor hearing aids appeared in 1953. They were created to replace vacuum tubes; they were small, required less battery power and had less distortion and heat than their predecessor. The vacuum tubes were typically hot and fragile, so the transistor was the ideal replacement. The size of these transistors led to developments in miniature, carbon microphones. These microphones could be mounted on various items. There were body hearing aids where the earpiece was connected to the hearing aid and battery pack worn on the body. Ear level hearing aids consisted of eyeglass, behind the ear (BTE), in the ear (ITE), and in the canal (ITC, CIC) hearing aids. A Widex 25 hearing aid from the 1950's made in Denmark. Brown and gold metallic casing with a volume control dial and an on/off switch. The curly wire runs to a circular outer disc. Although not present the disc would normally connect to an ear mould which is individually fitted to the wearer. The item comes in a soft leather case."DENMARK" inscribed on gold front. "WIDEX 25" inscribed on back. "WIDEX" on inside cover of case. "W" on outside cover of case device, hearing aid, loss, hard of hearing, deaf children australia, victorian school for deaf children, vsdc, denmark, widex

The first all transistor hearing aids appeared in 1953. They were created to replace vacuum tubes; they were small, required less battery power and had less distortion and heat than their predecessor. The vacuum tubes were typically hot and fragile, so the transistor was the ideal replacement. The size of these transistors led to developments in miniature, carbon microphones. These microphones could be mounted on various items. There were body hearing aids where the earpiece was connected to the hearing aid and battery pack worn on the body. Ear level hearing aids consisted of eyeglass, behind the ear (BTE), in the ear (ITE), and in the canal (ITC, CIC) hearing aids. Hearing aid with Pink and silver metal pack with attached wire to ear piece. Uses (A) battery. Ear piece moulded for wearer with dials for adjustments. In original box. Transitone and Universal Hearing Aids were manufactured by British Hearing Aids (Aust) P/L. Model 61T. NoV848 "TRANSITONE & UNIVERSAL/HEARING AIDS/BRITISH HEARING AIDS (AUST) P/L" printed on fabric inside lid of box. Inside battery compartment, label "MODEL 61T" ('T' handwritten) "V848" inscribed on hinge.

The first all transistor hearing aids appeared in 1953. They were created to replace vacuum tubes; they were small, required less battery power and had less distortion and heat than their predecessor. The vacuum tubes were typically hot and fragile, so the transistor was the ideal replacement. The size of these transistors led to developments in miniature, carbon microphones. These microphones could be mounted on various items. There were body hearing aids where the earpiece was connected to the hearing aid and battery pack worn on the body. Ear level hearing aids consisted of eyeglass, behind the ear (BTE), in the ear (ITE), and in the canal (ITC, CIC) hearing aids. A new aid type, the Calaid V, was introduced featuring a forward facing microphone, and three potentiometers for adjustment of maximum gain, maximum power output, and low frequency roll off. The Calaid V was introduced in the early 1980s and remained the most frequently used aid in NAL's service for the next ten years (From: THE CALAID: AUSTRALIA'S OWN HEARING AID by Laurie Upfold and Ray Piesse Single Behind-the-ear hearing aid. Provided and manufactured by the NAL (National Acoustic Laboratories), part of the Commonwealth Department of Health. "CALAID/V" on bottom face

The first all transistor hearing aids appeared in 1953. They were created to replace vacuum tubes; they were small, required less battery power and had less distortion and heat than their predecessor. The vacuum tubes were typically hot and fragile, so the transistor was the ideal replacement. The size of these transistors led to developments in miniature, carbon microphones. These microphones could be mounted on various items. There were body hearing aids where the earpiece was connected to the hearing aid and battery pack worn on the body. Ear level hearing aids consisted of eyeglass, behind the ear (BTE), in the ear (ITE), and in the canal (ITC, CIC) hearing aids. Part of the development of hearing aids Gold and burgundy metal casing, with an ear piece attached by wire. This is a body-worn hearing aid, with user instruction booklet. Manufactured by Rexton a subsidiary of Siemens."647 IV" on bottom of case, along with controls, "H N L" "M T O" and a numbered dial deaf children australia, hearing aid, rexton, siemens

The first all transistor hearing aids appeared in 1953. They were created to replace vacuum tubes; they were small, required less battery power and had less distortion and heat than their predecessor. The vacuum tubes were typically hot and fragile, so the transistor was the ideal replacement. The size of these transistors led to developments in miniature, carbon microphones. These microphones could be mounted on various items. There were body hearing aids where the earpiece was connected to the hearing aid and battery pack worn on the body. Ear level hearing aids consisted of eyeglass, behind the ear (BTE), in the ear (ITE), and in the canal (ITC, CIC) hearing aids. A Universal hearing aid supplied by Angus & Coote Hearing Aids. Universal Hearing Aids were manufactured by British Hearing Aids (Aust) P/L. Includes ear mould for right ear. In a teal leather box. ""Universal"/Mod 73-824" on back of pack. "Angus & Coote/HEARING AIDS" on inside of case.

The first all transistor hearing aids appeared in 1953. They were created to replace vacuum tubes; they were small, required less battery power and had less distortion and heat than their predecessor. The vacuum tubes were typically hot and fragile, so the transistor was the ideal replacement. The size of these transistors led to developments in miniature, carbon microphones. These microphones could be mounted on various items. There were body hearing aids where the earpiece was connected to the hearing aid and battery pack worn on the body. Ear level hearing aids consisted of eyeglass, behind the ear (BTE), in the ear (ITE), and in the canal (ITC, CIC) hearing aids. Tan plastic case hearing aid, with wire, ear piece and ear mold with metal clip. Made in England and sold by Myer Hearing Service. "MYER/HEARING SERVICE" engraved in gold on case. "MADE IN ENGLAND" on bottom of case. deaf children australia, hearing aid, myer hearing service

The first all transistor hearing aids appeared in 1953. They were created to replace vacuum tubes; they were small, required less battery power and had less distortion and heat than their predecessor. The vacuum tubes were typically hot and fragile, so the transistor was the ideal replacement. The size of these transistors led to developments in miniature, carbon microphones. These microphones could be mounted on various items. There were body hearing aids where the earpiece was connected to the hearing aid and battery pack worn on the body. Ear level hearing aids consisted of eyeglass, behind the ear (BTE), in the ear (ITE), and in the canal (ITC, CIC) hearing aids.Cream plastic hearing aid with metal back. Takes 3 batteries and there is a piece of paper in the battery case advising 'CAUTION'. Two round knobs on top, 'ON/OFF' and the other I assume is Volume. There is a plastic tag for attaching to a button (probably), headphone sockets. The front is metal lacework with a scrolled 'Z'"Z" on front. "ZEPHYR/HEARING AID/2546" on back. "U C"/"M"/"7777" on inside battery case.deaf children australia, hearing aid, zephyr hearing aid

Knitted fabric is made with a single yarn or sets of yarns moving in only one direction. Whether done by hand or by machine, the process is the same. The knitting needle loops the yarn through itself to make a chain of stitches. These chains, or rows, are connected to produce the knitted cloth. There are two types of commercial knitting machine. A flat-bed has its needles, one for each loop, arranged in a straight line to produce a flat fabric. A circular machine has its needles arranged on a rotating circle. The cloth forms as a tube which can be made into seamless clothing. Personal history of Edna Harris who used the machine.knitting machine, industry, design, socks, clothing, wool

This model was found in the collection of Bay Steamers Maritime Museum. It is not knowt who created it but it is supposed that it was constructed to educate the many masters of the Wattle in the operation of a steam engine - a not so common mode of power these days. A Bay Steamers Maritime Museum examined the model in March 2012 and discovered that is was in poor repair. Using his existing knowledge, and with reference to some historic texts, he made some repairs and returned the model to working order. Here is his anaylsis of the situation as an excerpt from the Bay Steamers Maritime Museum newsletter Steamlines May 2012 "I was confronted with a model of a steam engine used years ago as a training aid for hopeful steam engineers. Already having a knowledge of steam operations, I considered a museum write-up for that model a ‘piece of cake’. However, on turning the model’s crankshaft, the valve timing seemed ‘out of kilter’ with the movement of the piston. Problem was that the two eccentrics on the crankshaft were not properly secured to it. Eventually I fastened the two eccentrics to the crankshaft where I felt that they should be and then realized that one of them had a chain-driven valve-timing device attached. This would be adjusted while an engine was running to achieve best performance and fuel economy whilst in operation by accurately controlling the period of time during which steam under pressure from the boiler would be admitted to the cylinder and give greater time for the steam to expand in the cylinder, move the piston and turn the crankshaft and thus, drive the attached apparatus. When the valves were correctly set up it was then possible to get the model to function properly.The model comprises a green section, which is the actual the model mounted on a brown painted board. There are two parts of the model, painted white representing the steam passages, and black representing the cast- iron portions of the cylinder-block casting, and of the main valve sliding between the cylinder a second sliding valve. Of the black portions, one slides back and forth being connected to a rod which is connected to an eccentric clamped to the crankshaft and is the nearer to the flywheel of two eccentrics. This eccentric is attached to the crankshaft at an angle of 90 degrees to the crank-pin attached to the flywheel. To operate the model simply turn the flywheel by means of the handle attached to its crank-pin. A second eccentric is also attached to the crankshaft, further away from the first eccentric, and it is adjusted to operate 90 degrees from the first eccentric (that is, 180 degrees from the crank-pin) A piston (painted silver) is located in a plastic cylinder and has a piston rod which passes through one end of the cylinder, (in actual practice a steam-proof gland seals the cylinder against loss of steam) terminating in a cross-head slide between four rails guiding it. From this cross-head, a connecting rod joins the piston-rod to the flywheel via the crank-pin attached to the flywheel which is part of the crankshaft. (In actual practice, a flywheel may not be used, particularly in a multi-cylinder engine.) The white portions of the model painted nearest to the cylinder represent the two steam ports cast into the main cylinder block, whilst one section painted in between those two represents the exhaust outlet (which may be connected to a condenser to conserve water, or to the open air). The main slide valve has three white-painted portions painted thereon. It has two white-painted marks representing the steam passages to the steam ports into the cylinder, and a third section in between the other two, being that part of the valve through which exhaust steam passes in line with the ports in the cylinder block. By rotating the flywheel, the operations of an engine will be observed as steam is admitted to the main valve via the gap between the two jaws of two moveable portions of a second sliding valve which is operated by the second eccentric attached to the crank-shaft. This eccentric is used to finely tune the valve timing of this model to obtain best running results of an engine. There are various methods used for reversing a steam engine. model compound steam engine, steam engine, model, crankshaft, valve, flywheel, wattle, engineer, eccentrics

Cast iron stoves burn solid fuel such as wood or coal, and are used for cooking and warmth. The stoves have a firebox with a grate where the fuel is burned. The hot air flows through flues and baffles that heat the stove top and the oven. Before cast iron stoves were invented, cooking and heating were carried out in outdoor open fires, and later, in fireplaces inside the home. In 1642 the first cast iron stove was manufactured in Lynn, Massachusetts, where molten cast iron was poured into a sand mould to make rectangular plates that were then joined together to make a box. Benjamin Franklin invented the more efficient Pennsylvania stove in 1744, and this efficient design is still used today. After the mid-19th century cast iron stoves were produced with burners in different positions, giving varied temperatures, so a wide variety of foods could be cooked at the same time at the most suitable heat, from slow cooking to baking scones. In contemporary times people the new wood-burning stoves had to meet the anti-pollution standards now in place to protect our environment. By the 1920s gas cookers were being introduced for domestic use, and by the 1930s electric home cookers were being offered to householders. PLANET STOVES In August 1925 the firm Cox and Rizzetti, Stove Works, and also Sydney Road, South Melbourne, advertised in the Brunswick and Coburg Leader of November 11, 1925 as "formerly with Harnwell and Sons" and as "specialists in solid cast iron Planet stoves ... which merit an inspection from builders and householders". The firm continued in business and was mentioned as sponsors in the King Island News in 1971. Harnwell and Sons was listed in the Victorian Government Gazette of 1894. It is curious that the firm was mentioned in an article in the Sunrasia Daily of June 14, 1934 titled 'Planet Stoves' as a manufacturer of Planet Stoves. This Planet No 3 stove is an uncommon example of cooking equipment used in kitchens in the early 20th century, as the firebox is above the oven rather than beside it. The cast iron combustion stove is significant as part of the evolution of domestic cooking. Previously cooking was mostly carried out in outdoors in open fires, and later in fireplaces indoors. Cast iron stoves are still used today and have additional features such as thermostats to monitor and maintain temperature, water heating pipes connected, and environmentally approved anti-pollution fittings. Stove; a compact, blackened cast iron combustion cooker, installed within a fireplace and enclosed by bricks on both sides. The upright rectangular stove has a flat top with three round, removable cook plates and a flue connected at the back. The front has three doors with round knob handles; a swing-down firebox door above a sliding ashtray, and two side-hinged oven doors above a sliding opening. Inside on the side walls are two pairs of runners. Behind the pair of doors is an oven with two pairs of rails and two removable metal shelves. The stove has cast inscriptions on the chimney flue and on the front of the right hand side stove door. The model of the stove is The Planet No 3, made in Melbourne.Chimney flue, "[within rectangle] THE / PLANET" Stove door, "(within oval) PLANET / No 3"flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, stove, cast iron stove, combustion stove, wood-burning stove, wood stove, wood oven, solid fuel stove, cooker, the planet, planet, planet no. 3, kitchen equipment, baking, domestic cooking, cooking equipment, food preparation, planet stove, planet cooker, cooking range, slow combustion stove, antique, range cooker, cox and rizzetti, harnwell and sons, melbourne manufacturer

Correspondence between Geelong HS and BHS 1974/1975 re Derwent (Darwent) Gully. 1. Letter from W J Morrow (GHS) dated 2/8/1974 re the name Derwent Gully (or Derwent street or other Bendigo place-name) being originally Darwent - on basis of claim of Joseph Darwent in a letter copied from Sheffield, England (details in GHS letter). Mention of the possibility that township of Eaglehawk be connected with Joseph Darwent/s reference to his finding a nugget ''in the form of an Eagle Hawk'' when working in ''Gowlers Gulley''. 2. Attached tracing of gullies and associated townships; 3. Reply dated 5/5/1975 stating that only references that can be found relate to 'Derwent'.eaglehawk, history, gowlers gully, derwent gully, gowlers gully, josseph darwent, long gully township

Photograph - black and white. The new SEC building still under construction. The 'old market building' can be seen to the left of the photo. Man on bicycle in dark clothing, man in black clothing walking to the right, lady in dark clothing walking to the left, light post with three cross bars and street light, advertising material displayed on corner section of fence, man in black standing over bhis bicycle to right of tree, dark colour utility vehicle parked in williamson street, twin power poles connected with 5 or six cross bars, vehicle angle parked in front of utility. Rear of photo has stamped name of the developer of the photo printed by Oliver's Bendigo. Number 79 witten in pencil.Printed by Olivers, Bendigo.organization, public utility, electricity company, s.e.c. victoria. 1939. bendigo.

Used to communicate with the local telephone exchange and for connection to other subscribers. The introduction of automatic exchanges saw the their demise. This phone was used in the family home of the donor at Caboolture (aboriginal for carpet snake) during the 1940s and 1950s.A magneto telephone for communication with a manual telephone exchange. The handle on the right hand side, which was turned to rotate the magneto to call the exchange - ask operator for a number and then to be connected. Telephone enclosed in a specially designed box for mounting on the wall. There was a bell on top which rang when the magneto ringer at the exchange was turned. Fitted with a carbon microphone mounted on the front of the box for the transmission of the spoken word and an electro- magnet. A receiver which hangs on the left hand side on a hook. The hook acts as the on and off switch to answer the call and to switch on the battery to provide power for the receiver and energize the transmitter. There is an angled ledge for writing any messages. There is no battery. The circuit for the phone is on the inside of the door to the interior of the phone. pHone is type CDA116 - PMG Registered - Ericsson.communication, telephonic

Kodachrome Transparency - 35mm slide - cardboard mount, with one side with red border and words "Kodachrome Transparency / Processed by Kodak" top and bottom. Photo taken by Ben Parle 8/4/1958. Has slide No. "5" stamped in black in top corner. Photo of the SEC Ballarat Ford welding truck, at the intersection of Macarthur St and Wendouree Parade, View Point Junction. Note tram stop signage. Three SEC workers in view, with road signage set up and truck connected to the overhead for welding work. Note bicycle leaning against truck. Welder - Weld For high resolution scan see btm2864.tif See Reg Item 7700 for another photo of the truck in the Power Station yard. "Drummond St. and View Point Junction Ballarat" / "8-4-58"tramways, trams, rails, welding, trucks

The knitting machine is a recently designed instrument, especially when it is compared with its ancient counterpart, the loom. It enables the creation of many metres of fabric very quickly. A knitting machine is composed of a series of needles which mimic the process of manual knitting. The mechanism engages numerous mechanical elements simultaneously and enables the creation of many metres of fabric very quickly. In addition, a knitting machine can be setup to produce unique bolts of fabric. The density of the fabric may be modified and a knitting machine can produce double-faced effects. A doubled-faced effect creates colour combinations through the introduction of an additional colour to the knitting pattern. This knitting machine is a Coppo brand. It contains over five hundred needles and was produced in the 1960s. It is a representation of the best available in the world at that time. Originating from Italy, it was designed for commercial use. Through both precision and capacity, Italian artisans were seen to be the best in the world of textiles and knitwear. Through emigration, globalisation and the regularly available quantities of wool, Australia came to compete on this stage. The owner of this particular machine migrated from Italy in 1959. When she did, she brought with her a Dubied knitting machine. She later replaced it with this Coppo. When in Australia the owner began work as a piece worker, knitting jumpers and worked for some of the iconic names in the Australian knitting trade including ES Poratt and Alpin Manufacturing. The owner’s role progressed from a piece worker to a wool garment designer and she won many Wool Industry Awards in the 1970s and 1980s. Her high quality of work using and her individual custom designs were spoken about by many of her customers and she had a very large private clientele. She designed and knitted fully fashioned tailored jumpers for people for around 30 years.Knitting table sits on a stand with wide metal legs. Legs contain lettering 'COPPO torino'. Legs are connected via three thin metal poles as well as a metal band and the bed of knitting table at top. The connecting metal band has the lettering 'SUPER - COPTAL' attached. The Knitting table itself contains two beds and a bench at the rear. Attached to the bench is a thin metal structure for the elevation of yarn. It has four crane esk structures above on this metal structure. The bench is covered in a pale grey laminate in the imitation of wood. Attached to the knitting bed is a sliding contraptions containing two handles at the front followed by a complex semi-circle sliding mechanism used to move the knitting mechanism front and back.Left Stand. Lettering: Coppo Torino Right Stand. Lettering: Coppo Torino Centre Stand. Lettering SUPER - COPTALcoppo, knitting machine, design, italy, wool, business, migrants

The Loyal Victoria Lodge was established in Warrnambool in1862. It was a Lodge connected with the Friendly Society Manchester Unity Independent Order of Oddfellows. Friendly Societies were established to give members assistance in times of illness and hardship and to offer insurance against such events. The MUIOOF had its origins in Manchester, England. The Warrnambool Lodge built the Oddfellows Hall in Koroit Street in 1869 and in 1872 it joined with other friendly societies and established the Friendly Societies Park in Koroit Street. The MUIOOF joined with the Australian Natives Association and today the new name in Australian Unity. No details are available on W. A. McLean but the certificate indicates that he served his country during World War Two.This certificate is of considerable interest as the Loyal Victoria Lodge was a pioneer friendly society in Warrnambool with its history going back to 1862. It is also a good example of the certificates given to Warrnambool residents who had rendered significant war time service in World War Two.Framed Certificate featuring text and a coloured picture. The picture includes: a dove, five scrolls, a laurel wreath surrounding a globe, three women in long dresses, three young children, two stylised flower beds, rays of light, a hill and four coats of arms. It is covered with clear plastic with a metal back and metal prop. WARRNAMBOOL DISTRICT INDEPENDENT ORDER OF ODDFELLOWS IN VICTORIA MANCHESTER UNITY FRIENDLY SOCIETY. The Officers and Members of the Loyal Victoria Lodge No. 4835 express grateful recognition and sincere appreciation to Bro. W. A. McLean for services rendered to God, King and Empire in Great War, 1939- 1945. N.G.Chas Gerock V.G. F.J. Toogood Rob Fairbridge Secretary. a circular red seal.

In 2005 the H.M.A.S. Warrnambool was de-commissioned in Darwin and the Mayor of Warrnambool, Cr Glenys Phillpot, was present at the ceremonies connected to this event. She obtained this sailor’s hat at that time as a souvenir of the ship. It appears to be brand new. H.M.A.S. Warrnambool was the second ship with this name. The first H.M.A.S. Warrnambool was built in Sydney in 1941 and commissioned for anti-submarine and mine sweeping duties. In 1947 it was struck by a mine in northern Australian waters and sunk with the loss of four lives. The second H.M.A.S. Warrnambool was commissioned in 1981as a patrol boat in northern Australian waters. It had steamed over 500,000 miles before the end of its working life in 2005 and had visited Warrnambool several times. This sailor’s cap is of importance as a memento of the second ship named H.M.A.S. Warrnambool and particularly commemorates the de-commissioning of that ship in 2005 in Darwin. This is a white seaman’s hat with a flat oval-shaped crown made of stiffened white material with two white metal eyelets on each side. The base has a black ribbon with a black bow and lettering in woven gold thread. Inside there is a leather band with a white bow and a navy blue ribbon to act as a chin strap. This is attached on one side only. Inside also is a white label with the maker’s information on it. H.M.A.S. Warrnambool MAPE uniform headwear of the MCH group of companies 3405-66-075-6064 E 5 R.A.N.

This jacket appears to be part of the uniform, connected to Warrnambool through its sleeve labels, and to the sea, through its anchor and chain buttons. It may have been worn in the merchant navy by a senior seaman, due to the good quality of fabric and the double-breasted design, or to life saving at sea, such as a member of the Life Saving Rescue Crew, or even a Harbour Master. This jacket has been used for display on the ketch 'Reginald M', built in 1922 in South Australia and spending the final years of its life at Flagstaff Hill Maritime Village from 1975-2016. The vessel spent much of its working life as a coastal trader along the south-eastern coast of Australia.This maritime jacket is significant for its connection with Warrnambool and to maritime service. Its high quality wool suggests that it was made for a senior ranking person. This jacket could have been used by a seaman in the merchant navy, which provided the essential service of transportation of goods and passengers between the ports of south-eastern Australia, including the Port of Warrnambool.Uniform jacket or coat, maritime. Heavy duty navy-coloured woollen jacket lined with light-weight woollen lining coloured blue with thin white stripe. Double-breasted front with eight buttons with the motif of anchor and chain. Two waist pockets on the outside, two breast pockets on the inside, closed with composition buttons on the lap, plus one spare button. Dark felt fabric labels were stitched to each sleeve just below the shoulder, with gold embroidered letters. Embroidered sleeve labels "WARRNAMBOOL" Embossed on eight buttons, symbol [chain joined to top of anchor and entwined around it, with text on anchor's crossbar]flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, meritime uniform, men's jacket, woollen jacket, double-breasted jacket, merchant navy, maritime uniform jacket, anchor and chain buttons

Warrnambool Cheese and Butter Factory Company was formed by a group of Warrnambool business men. The company was registered in May 1888 and commenced commercial production in November 1888. The company retained its independence for more than 125 years until acquired by Canadian firm Saputo. It has operated from the same site since its inception and also has an office in Japan. Milk processing is undertaken by Sungold. Milk powder for export is also produced on-site. Cheese World is a retail arm of the company operates on a connected site selling company products, local food products, wine and cheese tasting. Cheese World Museum operates under the Cheese World umbrella.Aerial colour photograph of Warrnambool Cheese and Butter Factory in wooden frame. Shows buildings and surrounds. Lines indicate factory boundaries, dotted lines indicate property extension. Date is recorded on the image.17.10.2000allansford, warrnambool cheese and butter factory company, saputo, dairyiing, dairy manufacturing, diary manufacturers, cheese, butter

This ceramic tankard mug was produced for Melbourne Legacy to honour their Patron. The Patron of Legacy is usually the Governor of Victoria, since the very early days of Legacy. It appears to be taken from a photo of General Sir Dallas Brooks KCB, KCMG, DSO, KStJ., who was Governor of Victoria from 1949. The date made is unknown but it believed to be early 1950s. Similar mugs were produced to honour Legatees Stan Savige and Syd Birrell and were estimated to have been produced in late 1940's or early 1950s. A similar one was made for the Queen's coronation in 1953. The maker was the firm of EG Greenway, a pottery manufacturer, which was connected to Legatee Herb Greenway.Shows the importance of the patron that he was commemorated in a ceramic mug along with Syd Birrell and Stan Savige and the Queen.Cream ceramic mug with handle, with relief portrait of the patron of Legacy, under which is etched 'Our Patron' on one side, with a relief symbol of the Legacy Torch and Wreath of Laurel on the opposite side.'Our Patron' is etched under the relief portrait. Underneath etched makers marking, E.G. Greenway Pty Ltd. Australiasouvenir, patron, dallas brooks

Belleek was established following the Irish famine of the mid nineteenth century that brought so many Australian families, including the Taffe and Berkery families to immigrate to the Australian colonies. This Belleek porcelain tea set and tray in the Thorn pattern based on the hawthorn bush sprig in flower carries the impressed registration mark for 1878. Belleek was well represented at the Melbourne International Exhibition of 1880-81 at Melbourne's Exhibition building and many examples were bought by key Ballarat Irish families including those connected to this family such as the Brophy, O'Malley and Fitzgerald families, Julia Taffe's (nee Berkery) aunts uncles and cousins. Many such examples remain in Ballarat collections although this is not one.Impressed factory mark and registration mark on base of each piece.belleek, porcelain, ballarat, ireland, exhibition building, melbourne, exhibition, thorn pattern, irish famine, tea set, tray, brophy, fitzgerald, o'malley, julia taffe, berkery, australian colonies,

Louis Heinrici, Germany, circa 1900 a small Stirling type hot air engine in which a body of air is worked constantly, being alternately heated and cooled during each revolution of the crankshaft. Heinrici hot air engines are of the valveless, closed cycle type, generally called Stirling cycle engines, after Robert Stirling, the Scottish Presbyterian minister who pioneered their development in the early 1800's. They operate by alternately heating and cooling a quantity of air, called the working fluid, contained in the engine's internal spaces. Heat is applied externally and passes through the cylinder wall, heating the working fluid, which is then expanded against a piston to do mechanical work. After heating and expanding, the working fluid is moved to a cool space where it cools and contracts before being returned to the hot space for the cycle to repeat. It has a displacer (just a loose piston), below and in the same cylinder as the power piston to which it is connected via cranks and linkages so as to lead by 90degrees of crankshaft angle. The displacer space and the piston space are connected by the annular gap around the loose fitting displacer so that the working fluid moves between these spaces and changes volume by the appropriate ratio as the engine rotates. Because they have no valves and experience no sudden pressure changes, Stirling engines are noted for quietness and reliability. Heinricis use air at atmospheric pressure for their working fluid, but for higher specific output (power for size) and better efficiency, modern Stirling cycle engines use pressurised gas- air, nitrogen, helium or hydrogen.Historic - Hot Air Engine - MotorHot Air Motor made of Steel with two drive wheels. a small Stirling type hot air engine in which a body of air is worked constantly, being alternately heated and cooled during each revolution of the crankshaft. Heinrici Motorheinrici hot air motor, puffing billy

This trophy was presented by the Country Women's Association (C.W.A) Kiewa Valley Branch circa 1950's. This was in a period when the C.W.A. was the major women's organisation which had the greatest influence amongst rural women (especially in isolated areas). This was a period when broad based communications were mainly by radio,women orientated magazines and the telephone. The CWA was an organisation that catered exclusively to women's needs. The atmosphere was one of "sisterhood" and covered nearly all the needs of rural based women. This one organisation incorporated knowledge and learning targeting women who physically may be isolated but not mentally. The C.W.A. motto "Honour our God, Loyalty to the throne, Service to the country, Through country women, For country women, By country women."The Kiewa Valley Group of the C.W.A. was a focal point for women in this still relatively isolated rural region to have a place of refuge from the heavy domestic demands that family and business exerted, and the need of a time and space to gain all the mental relaxation and group bonding necessary to balance the sometimes harsh environment that rural life presented.Silver plated chalice trophy has two "block ear" type handles fastened at the top lip and going 40mm vertically down to reconnect with the bowl. The bowl is connected to the dark brown plastic base by a brass (silver plating has worn off) stem (flower vase shaped).the chalice stem is attached to a circular tapered dome 30mm high which is also silver plated. The plastic base has a 35mm high extension rising from the broader circular bottom section and is rectangular in shape except for the quarter circular indent at each corner. The final circular base provides the chalice with the stability to stand on a flat surface. The whole of the base is hollow allowing the stem fastening nut to be viewed. The inscription on the chalice has been carefully and professionally scribed into the metal. "*C W A* KIEWA VALLEY GROUP H & H.I. EXHIBITION-PRIZE FOR MEMBERS. 40 & OVER" mementos, acknowledgement, cwa awards, trophies, rural women's club

The "nib" pen was the preferred scribe method up until the "fountain" pen was produced (1940's), both could use specific inks that had longer life periods on paper surfaces. Ink wells such as those incorporated in this desk set allowed the user to select the colour and "type of ink" required. The nib pen was the only writing pen that could tolerate "Iron gall" ink. Legal documents were at the start of the mid 1980's required by law(in Australia) to be signed by "well" filled pens. The inks used were either "indian" or "iron/oak gall" because their infusion into paper could not be erased and they had a longer "paper" life and were harder to forge. Bottled ink was superior to that supplied in fountain pens or "biro pens" because the user's choice to a greater range of inks covered a variety of scenarios. Forging a nib signature is extremely hard compared to that of a "biro pen" because a nib settles in to the users particular style of pen movement and arm pressure.This desk writing set was typical of those used by administrators, businesses or quasi legal sectors within the Kiewa Valley, before the lifting of the ban on the use of biros "to sign" legal documents. Fountain pens were used extensively before cheaper biros (throw away) writing implements (1940's) came into the market place.This glass ink well desk set has two circular ink wells connected to their respective nib holders. The nib holders are smaller circular receptacles and feed off the larger ink reservoirs. Between the two larger ink wells is a shallow bottomed elongated "oval" sphere able to contain "slide on" clips, two pronged fasteners (require a hole to be punched in papers) or small "bulldog" clips. At the front edge is an elongated and grooved (two) place for writing nibs. The grooves keep each nib or fountain pen separated.The glass structure is made from clear glass and only the outside "boxed" walls of the desk set make contact with the desk surface. The ink wells can also securely accommodate small bottles of ink. This would have been the case for refillable fountain pens.stationery, fountain pens, nib pens, ink receptors, glass ink wells