Annual school sports day St Joseph's College Wangaratta.Sports' Day, Championship in runningChampionship stainless steel Trophies ( 2 ) plus photoNo 1 S.J.C.W 1963 A. Cimerman No 2 S.J.C.W 1963 Senior Championship A. Cimermananne markic, championship in running

Celebration of Baraga House HostelIst AnniversaryBlack and white photo

From the estate of Jenny LangOval piece of hand embroidery. Yellow flowers and two sets of leaves on purple silk background. Bound with gold metallic fabric and apricot silk.handcrafts, embroidery

This junior football shield was given by James Fairbairn (1897-1940), a prominent Western District pastoralist, aviator, local politician and Federal Cabinet minister. He was killed in a Canberra air disaster in 1940. The shield shows that several football teams, including West End, Russells Creek and East Warrnambool won the shield in the 1930s. In 1936 the shield was won outright by West End Football Club. This club, founded in the late 19th century, played in Western District Leagues until 1946 when it joined the newly-formed Warrnambool District Football League. In 1971 it merged with the Allansford Football Club to become the West End-Allansford Club and in 2002 the name ceased to exist when the team name was changed back to Allansford Football Club. This trophy is of interest as a football trophy given over 80 years ago and as a memento of the Warrnambool West End Football Club, a team no longer existing. The sport of Australian football has been, and still is, highly prominent in the Warrnambool district with football first played in the town in 1861. This is a wooden shield with nine silver-coloured metal discs affixed to the shield with metal pins. Eight of these discs are shield-shaped. All of the discs have etched inscriptions. The discs are somewhat stained and the wooden shield has traces of paint on it. There is a wire attached to the back of the shield for hanging on a wall. ‘Warrnambool Junior Football League’ ‘Junior Challenge Shield presented by J.V. Fairbairn Esq. M.L.A. 1932’ ‘Won Outright West End Football Club 1936’ west end football club, warrnambool, j.v.fairbairn

Branding irons are used to print a burn an identifying marker on the hide of horses or cattle so that they may be later identified if they become lost or escape from their pasture. The irons were typically forged by blacksmiths using a toolset that included hammers, anvils and chisels. The branding irons were used by heating the end bearing the owner’s initials to a very high temperature in a furnace, and then burnishing it against the skin of the cow. Brands were registered with state governments as unique marks. This allowed for a state registry to be maintained. This item was used in Orbost in the livestock industry.This item is an example of a common implement used in rural industry in Orbost.A branding iron with the letter J on the end. It has a long handle with a ring grip at the top.branding-iron livestock-industry rural-industry

Stainless steel brackets off the wreck of the Gypsy Moth V, wrecked near the lighthouse on 19 December 1982. These brackets were used to hold wire stays to the mast or bowsprit. The comparatively recent relics have a reliable provenance to the yacht Gipsy Moth V, which ran ashore on rocks under the lighthouse on 18 December 1982. It was the yacht that carried Sir Francis Chichester (1901-1972) on his second world voyage in 1971. While sailing the 19m (63.5ft) vessel in the 1972 Transatlantic Race, Chichester became weakened by cancer and had to abandon the competition and died two months later. His son Giles sailed the yacht back to England. In December 1982 British skipper, Desmond Hampton chartered the yacht for the around the world, single handed race. He had been running second and was nearing the end of the second leg of the competition from Cape Town, South Africa to Sydney when the accident happened. After going to bed he set the yacht on self steering and it wedged itself into a crevice just below the lighthouse and broke up. Everything was salvaged except for the masts and the engine. Twenty five years later, in 2007, items salvaged from the wreck surfaced in regional Victoria in a display of the ‘Gipsy Moth V Collection’, which included wreckage as well as photographs. The information from the ‘Sail World’ website did not provide any further details about the exhibition or its organisers.Two similar stainless steel brackets; half tubes with diagonally protruding flat section with hole at end. End is rounded.

“THE WESTERN FRONT- AND AUSTRALIAN PERSPECTIVE “ “It is a snapshot of war, with the focus on the sacrifices made by 60,000 Australians who died and the manny more who returned home but were changed forever “Hard cover book with dust cover. Hard cover- cardboard, green colour buckram with white print on spine. Dust cover- paper, white, red and gold print on front, spine and back. Illustrated- front Peter Corlett’s statue “COBBERS” in colour with red cloud background. Book- colour photographs “Villers - Bretonneux Military Cemetry” End papers- illustrated green tones names on a honour roll. Owners label. Front 217 pages, plain ,white. Illustrated black and white, colour and sepia photographs and maps.Front end paper- owners label- J.E. WILES 2/7th INF BN VX16067books, histroy, ww1, western front

Cordite Wagon - 18½-inch (460mm) gauge wagons came from the Commonwealth Explosives factory at Maribyrnong in Melbourne’s western suburbs. Both have gun-metal wheels, as avoiding sparks was understandably a priority in an explosives factory. Both wagons also have water tanks to drip water on the wheels as an added precaution. Cordite, an explosive used in artillery, was manufactured and pressed into thin sheets, which still contained a quantity of acetone solvent from the manufacturing process. The sheets of cordite were laid in racks of perforated trays in the cordite wagons, which were hand-pushed to the cordite drying-house where the trucks were coupled together in rakes and warm air was blown through them. The acetone, being very volatile, was evaporated out of the cordite and recovered to be re-used in the manufacturing process. Historic - Industrial Narrow Gauge Railway - Commonwealth Explosives factory, Maribyrnong, Victoria, AustraliaCordite Wagon - Rectangular yellow wagon made of wood and brass with aluminium traysThe number 77 is on the endspuffing billy, wooden wagon, 18½-inch gauge, explosives, maribyrnong cordite factory, maribyrnong explosives factory, puffing billy museum, industrial narrow gauge railway

Part of Honeybun collection, Mitcham RSLExample of equipment from WWIWWI cigarette lighter from Messerschmit plane?LZ on end of casing

Wooden moulding plane build in the Grecian ogee style with bevel; it features a single cutting iron with a scalloped profile held in place by a wooden wedge.'A Mathieson and Sons, Glasgow' stamped on one end and '9/6' at the other end.plane, moulding plane, mathieson & sons, wooden plane, grecian ogee style, glasgow

Hand Beaten Brass PlaqueAnchor one end, number 1 the other end and Japanese writing in the middle

This is the second Delley''s Bridge. A new and more substantial bridge was built in 1911, only to be badly damaged in a 1917 flood. The collapsed western end was rebuilt, this time supported by concrete pillars.The photo shows a dirt road crossing a creek via a wooden bridge. A woman is driving a horse and buggy onto the far end of the bridge. There are ferns in the foreground and trees in the background.access routes, roads, structures, bridges

The NQRs were the standard Medium open goods wagon. Generally the sides and ends were removable thus providing a totally flat truck. Three long drop-down doors formed the sides thus allowing easy loading and unloading. 218 of these goods vehicles were built between 1898 and 1914 ? numbered 1 - 218​. Originally, these wagons carried the code letter R​ as they were built with sides and ends. They later had the R removed. Unlike the Broad Gauge, VR's 2 ft 6 in (762 mm) narrow gauge network never had four-wheeled wagons (aside from a handful of trolleys). Because of this, a single design of open wagon emerged and this was the only type of wagon ever used on these lines. This was the NQR class, a wagon with the same length and loading capacity as a Broad Gauge four-wheeled open wagon to make transferring freight between the gauges easier. The wagons, numbered 1 through 218, were built between 1898 and 1914. The wagons used the same underframe as most other non-locomotives on the VR Narrow Gauge. Letters and numbers were originally painted only on the end bulkheads and doors, both of which could be removed as traffic dictated, and this made wagon identification difficult until the decals were transferred to the underframes of each wagon In the 1910s some NQRs were provided with removable wood and steel frameworks with canvas roof canopies and side curtains, and internal seating to supplement the rest of the passenger stock during busy holiday periods. Puffing Billy has re-created these for emergency capacity. Five more NQRs, numbered 219-223​, were built between 1990 and 1992 initially for passenger use so were fitted with the removable frames Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 29 NQR - Open Medium Truck with drop ends VR Service History 15/12/1898 NWS Built new *NQR 29.VA - 15/12/1898 NWS Built new - / /1926 - To NQ 29.VA - NQ 29.VA - /10/1954 - Sold (to) - Puffing Billy Service History or Notes July 2016 - LiftedHistoric - Victorian Railways - Narrow Gauge Rolling Stock - NQR Open Medium Truck with drop ends29 NQR narrow gauge Open Medium Truck with drop ends made of Steel and metal 29NQRpuffing billy railway, pbr, rolling stock , 29 nqr, narrow gauge rolling stock, victorian railways, nqr wagon

Refer Cat No. 7503, 7504, 7506, 4 book collection.Hard cover book. Cover - cardboard, with dark green colour buckram cover. Light green print on front cover and spine. End papers - mid green colour with cream print illustration back and front. 204 pages - cut, plain, cream colour paper. illustrated in colour, black and white and sepia photographs, illustrations, paintings. handwritten owners signature - front end paper. handwritten notes - on Editorial Note page.Front end paper - handwritten black ink - owner's signature "Lynette Smith/Johnson St/Ouyen" Editorial Note Page - handwritten grey lead pencil - 7 lines of very small almost illegible writing.books, army, ww2

Branding irons are used to print a burn an identifying marker on the hide of horses or cattle so that they may be later identified if they become lost or escape from their pasture. The irons were typically forged by blacksmiths using a toolset that included hammers, anvils and chisels. The branding irons were used by heating the end bearing the owner’s initials to a very high temperature in a furnace, and then burnishing it against the skin of the cow. Brands were registered with state governments as unique marks. This allowed for a state registry to be maintained. This item was used in Orbost in the livestock industry.This item is an example of an implement once used in the livestock industry in Orbost.A branding iron with the letter W on the end. It has a long iron handle with a ring grip at the top.branding-iron rural-industry

The double-ended ring spanner served as a useful, manual tool for maintaining farm machinery. The hexagonal rings would be placed over a nut to secure it, before the spanner was rotated to tighten the nut. The ring design provides greater purchase, or grip on all sides of the nut, which in turn reduces the risk of rounding the nut, or slippage. Early spanners were mostly made from iron and hand-forged using an anvil and hammer. Since the mid-19th century, gravity or powered drop forging techniques were used to compress metal for greater strength. Ring spanners produced in the 20th century are mostly made of chrome vanadium steel.stainless steel, some pitting. One end slightly smaller than the otherdouble, ended, spanner, tool, tools, churchill island, farm

Churchill Island Heritage Farm has a large photograph collection dating from the mid-nineteenth century to the last decadeBlack and white photograph of Billie Wilson sitting on the bonnet on the Morris at the end of Churchill Road on Phillip Island with the garage in the background.Catalogue number written in pencil on reverse. On reverse in pen '1939 The faithful Morris 8/40 that had many trips to Churchill in 1938 - 1940 period. Billie Wilson sitting on the bonnett. Car is at end of Churchill Road (on Phillip Island) and the old garage is in the background. Waiting for someone to bring over the dingy from Churchill)churchill island, billie wilson, morris, phillip island

The origins of the humble handheld driptorch have been lost in time. They are widely used for ignition in controlled burning operations in forest and grasslands. This "home made" burner wand uses kerosene and dates from the 1950s. It has an unusual long handle with a bend and wick one one end.Unusual "home made" design Long handle burning wand with a wick at one end. Brass flow valve in the middle. Base attached to a container of kerosene and has a screw cap. bushfire, forests commission victoria (fcv)

This splicing tool is handmade on a forge. It is used for splicing in fibre and wire rope work to form a semi-permanent joint between two ropes, or parts of the same rope or steel cable. The rope is partly untwisted and then the strands are interwoven. Splices can be used to form a stopper at the end of a line, to form a loop or an eye in a rope, or to join two ropes together. Splices are preferred to knotted rope; a knot typically can reduce the strength by 20–40%, but a splice is capable of attaining a rope's full strength. This homemade, handmade splicer is an example of a tool used to splice a cable or rope, a craft that was in much need onboard a sailing ship. Splicing tool; a spike on one end and a flat blade on the other, with goose-neck centre for leverage. Handmade.warrnambool, shipwreck coast, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, splicing tool, rope work, rope strands, knot making, netting, net making, sailmaker's tool

Hammered end and a spear like end

Marine Parade has not yet been formed through the low lying marshy area adjacent to North Arm. Very little vegetation on Eastern end of hummocks.Black and white postcard of the western end of Lakes Entrance,showing a glimpse of the North Arm bridge, town situated adjacent to Cunninghame Arm, sand hummocks and ocean in distance. Lakes Entrance VictoriaThe Township at Lakes Entrancetownship, waterways, bridges, hotels

The item is an end panel from the box section of a "SUN' Seed & Fertilizer Drill. It was manufactured by H.V. McKay Pty. Ltd. at their agricultural machinery manufacturing plant in Sunshine Victoria. The date of manufacture is estimated to be somewhere between 1921 and 1930 because of the imprint H.V. McKay Pty. Ltd. According to the Museum Metadata Exchange (http://museumex.org/oai/mv/2749) the Sunshine Harvester Works was reformed as H.V. McKay Pty. Ltd. in 1921 and in 1930 it became H.V. McKay Massey Harris Pty. Ltd after a merger with the Canadian farm machinery manufacturer Massey Harris. The two events in 1921 and in 1930 are also confirmed by Churchward, M. (2006) at (http://collections.museumvictoria.com.au/articles/2010).This early 20th century item is a relic of the agricultural machinery manufacturing past of Sunshine Victoria. The company started by H. V. McKay no longer exists and neither do the subsequent manufacturing companies H.V. McKay Massey Harris Pty. Ltd., and the later Massey Ferguson (Aust.) Limited. Manufacturing has disappeared from this site being replaced by a shopping centre and other retail outlets, high rise apartments, law courts, police station, Vic Roads, and soon will house the new Brimbank Council offices and library.Brown rusty cast iron end panel from a Seed & Fertilizer Drill"SUN" / SEED & FERTILIZER DRILL / H.V. McKAY PTY. LTD / MAKERS / SUNSHINE / D879 agricultural machinery, sun, "sun" seed & fertilizer drill, h.v. mckay pty. ltd., d879, 1921, 1930, sunshine

"War Veterans From Wedderburn and District". "Saluting Their Service".Hardcover book with dust cover. Cover - cardboard, with adhered gloss paper finish. White colour print on front, spine and back. Ilustrated in colour, front collection of photographs of memorial scenes, back portraits. Dust cover - paper, with duplicate print and illustrations as hardcover. Cover flaps - white print on green background. 412 pages, Cut, plain, semi gloss white paper. Illustrated in black and white. Photographs of portraits, medals and battle scenes. Front end paper - handwritten donation inscription.Front end paper - handwritten in black ink pen. "To Bendigo Military Museum/ Regards/ G. Arnott".books, biographies, military history, wedderburn

The NQRs were the standard Medium open goods wagon. Generally the sides and ends were removable thus providing a totally flat truck. Three long drop-down doors formed the sides thus allowing easy loading and unloading. 218 of these goods vehicles were built between 1898 and 1914 ? numbered 1 - 218​. Originally, these wagons carried the code letter R​ as they were built with sides and ends. They later had the R removed. Unlike the Broad Gauge, VR's 2 ft 6 in (762 mm) narrow gauge network never had four-wheeled wagons (aside from a handful of trolleys). Because of this, a single design of open wagon emerged and this was the only type of wagon ever used on these lines. This was the NQR class, a wagon with the same length and loading capacity as a Broad Gauge four-wheeled open wagon to make transferring freight between the gauges easier. The wagons, numbered 1 through 218, were built between 1898 and 1914. The wagons used the same underframe as most other non-locomotives on the VR Narrow Gauge. Letters and numbers were originally painted only on the end bulkheads and doors, both of which could be removed as traffic dictated, and this made wagon identification difficult until the decals were transferred to the underframes of each wagon In the 1910s some NQRs were provided with removable wood and steel frameworks with canvas roof canopies and side curtains, and internal seating to supplement the rest of the passenger stock during busy holiday periods. Puffing Billy has re-created these for emergency capacity. Five more NQRs, numbered 219-223​, were built between 1990 and 1992 initially for passenger use so were fitted with the removable frames In the 1960s the Puffing Billy Railway added grids in the floor of some to enable them to be used to drop ballast on the track where needed. Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 103 NQR - Open Medium Truck 16/12/1909 NWS Built new Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 5 tons Capacity 11 tons Built 1898 - 1915 (1992) Number Built 218 (223) In use 14 To be restored 6 VR Service History *NQR 103.VA - 16/12/1909 NWS Built new - / /1926 - To NQ 103.VA - Puffing Billy Service History or Notes Untrafficable at ClematisHistoric - Victorian Railways - Narrow Gauge Rolling Stock - NQR Open Medium TruckA large rectangualr open good wagon, with removable sides and ends creating a flat-bed. There are three long drop-down sides and eight narrow guage wheels. The wagon is 7671mm long and 1905mm wide with steel couplings at either end. The wagon is painted crimson (faded) with the words '103 NQR' stenciled in white at both ends. 103 NQRpuffing billy railway, pbr, rolling stock , 103 nqr - open medium truck, victorian railways, narrow gauge rolling stock, nqr wagon

Small rectangle box (cigar box), with wooden roll, covered in copper wire,brass bar, with wooden peg which meets copper wire on roll, 2 metal pegs on outside of box, which could attach to power leads (could be crystal set) or something to do with early morse code transmission. There is a lever that can be disconnected from an electrical force, that could produce a morse code"EARTH" & "ARIEL" hand carved on one end "PHONES" (hard to decifier) on other endballarat, radio, inventions, inventor, ariel, crystal set, electricity, electronics

Part of standard issue equipment to front line servicemen for first aid. Issued to Robert G. Jackson. Posted to Butterworth in 1966-69 as Flight Sergeant.Small compressed Brown packet made of paper with yellow label affixed on both sides. Label has black writing, Packet in middle has white pull strings so that package can be ripped open easily. Contents of packet is a white sterilised bandage to be used on burns. On both ends are instructions on how to open packet.Labelled - "Standard dressing B.P.C. No. 11 Medium burn dressing" followed by directions for use. Instructions on both ends - "To open packet pull tape".medical, butterworth,

Worn as part of a uniform, attached to the right shoulder of a jacket with the loose end in the right breast pocket. This jacket was worn by Bernie Farley, of the 8th/7th Battalion, Royal Victorian Regiment. This lanyard has social significance, being owned and worn by Secretary of the Warrnambool RSL, Bernie Farley. The lanyard was donated as part of a uniform set by Bernie Farley after 30 years of service in both the Australian Army and Royal Australian Air Force. Though worn in the 1990s, this uniform is in excellent condition as a representative example of an Infantry uniform of the period.Red cord lanyard with two loops knotted at either end; one knot has been looped around the lanyard to form an arm hole. The red colour signifies membership of the Australian Army.military uniform, ex-service, lanyard, army uniform, warrnambool