Textiles. Navy blue and red leather handbag. Body of handbag of navy leather with 2 cm diagonal strips of red leather across each corner front and bag. Side seams have red leather cord trim. Metal frame for opening covered in red leather with gold coloured metal trim on front with push clasp (5 cm x 1 cm) with blue leather trim. Opening tab on front. Inside lined with brown cotton fabric.Central swinging hinged coin purse and one gathered side pocket.Insde purse is a 9.5 cm lead pencil and a pen nib. Manufactured by MILADI HANDBAGS.Cloth label inside bag 'Miladi Handbags'textiles, domestic, ladies navy blue and red leather handbag

Clothing. Infant's white cotton gown with long sleeves. Round neck with casing for cotton tape ties. 2cm lace trim around neck. Back opening (18cm). Gathered at back from neckline. Front has pintucks from neckline to broiderie lace band at waist (15cm X 2.8cm). Gathered below band. Cotton fabric ties (66cm) attached to either side of waist band.Centre front of bodice has vertical lace insert (10cm X 2.8cm) from neck to waist. Ties and sleeves trimmed with 1cm lace. French seams. Machine stitched. Old box 230.costume, children's, infant's gown

Round neck, short sleeves, yoke back and front, nurse's blue cotton dress- uniform. Bodice gathers at yoke seam. 11 cm X 11 cm pocket on left breast. Concealed opening from neckline to hemline, has nine buttonholes - presumably buttons were exchanged between uniform dresses. One buttonhole at back neckline, and two buttonholes on the cuff of each sleeve, would also suggest a removable collar and cuffs. Two darts on either side of bodice. An inverted pleat from yoke to waistline at centre back. Seven gored skirt. Worn by Merryn Ellison.Name tag sewn to back neckline ; Merryn Ellison.costume, female, nurse's blue uniform

Issued as a uniform item post WWII until the late 1980s. It was also used parade dress until its replacement of a newly designed uniform made of polyester. This particular sample belonged to CPL K. Howe 3144504 whist in the Army Reserves 1982 to 2005The khaki battledress was standard uniform issued post world war two and used until the introduction of the polyester uniform in the late 1980s. This uniform belonged to CPL K. Howe, the donor providing good provenance. In conjunction with other items of militaria donated by the Howe family. Item can be to tell a story of multi generations of military service of the Howe familySingle breasted hip-height jacket in khaki fabric, fastened with five buttons down the centre of the chest. Two pleated breast pockets with triangular flaps fastened with two buttons. All buttons plastic and khaki green in colour. Jacket is fastened around the hips with a belt, attached on left hand side and buckled in a rectangular metal buckle on right hand side. Both left and right sleeves bear two patches, a double chevron and red rectangular patch rounded to follow the seam of the shoulder, with embroidered text. Navy lanyard looped around right shoulder, held in place by epaulet and tucked into right side pocket. Red patch reads "ROYAL AUSTRALIAN ENGINEERS" Internal left chest label reads "A.G.C.F./VIC. 1981/[broad arrow symbol]/6405.66.025.6408/SIZE OF CHEST/SIZE 99-102R/MACQUARIE 80/BATCH J/DRY CLEAN ONLY/CREASE UPPER/HALF OF/LAPELS ONLY/No. 3144504 [handwritten]/NAME/CPL K. HOWE [handwritten]"jacket, battledress jacket, battledress jacket khaki, royal engineers

Clothing. Men's black woolen bathing suit. Rib pattern in woolen fabric. Overskirt at front-to 6cms above gusset. Black and white V pattern fabric strip on side seams, forms keepers for belt. Woven cream fabric belt with silver plate buckle. Applique emblem of sailing yacht on lower left-hand side of skirt. The bathing suit belonged to Flight Sergeant Richard Harry Adams of Brighton. He was reported missing during an operation near Scilly Islands and was presumed killed on 03/10/1943. The bathing suit was amongst the very few items sent home to his mother.Label ''Thistle'' All wool Australian made, London Stores, the Boy's Shop Melbourne.costume, male, bathing suit

This cream and green patterned vest is said to have been made for William Herbert Teal as part of his "trouseau" on the occasion of his marriage to Daisy Edith Davis on April 14th 1916 at St. Peter's Church, Merino, Victoria, Australia. It is a handmade waistcoat but it is not known who made it. William Teal was born in 1889 to Elijah Teal and Isabella Campbell Reid in Camperdown, Victoria and after marrying, William and Daisy also lived (and worked as farmers) in the Camperdown area. They had seven children. Daisy died in 1962 and William died in 1975. A wedding portrait of William and Daisy shows William wearing a dark suit consisting of a single breasted coat, trousers, good shoes, gloves and a shirt with a stiff, high collar, however if he is wearing this vest, it is unfortunately hidden under his coat. Although by 1916, men's "ready to wear" clothing were widely available, this waistcoat was handmade (possibly by his mother or sister or future wife) and has been preserved by his family for almost one hundred years. Men's suits in the early part of the twentieth century were predomininantly three piece, consisting of a jacket, vest ( or waistcoat) and trousers made from matching fabrics. On special occasions (such as a marriage) the groom might also wear gloves and have a flower in his buttonhole. Some men liked to wear a watch attached to their waistcoat with a fob chain.This item is of significance as a rare example of a man's vest that was made for a special occasion (William Teal's marriage in 1916) and preserved by his family for several generations.Man's handmade vest with a green and cream patterned brocade front, trimmed with green cord around the edges and featuring four inset pockets (also trimmed with the green cord). It has six buttonholes down the left front edge (plus a hand embroidered buttonhole to hold a fob chain) and six corresponding holes for shank buttons (which are missing) down the right front edge. The back and lining are made from cream cotton fabric. The back has a centre seam and a strap with a metal buckle with prongs (to allow for adjusting the length). The cream lining and back display some discolouration and brown marks.flagstaff hill maritime museum and village, great ocean road, warrnambool, camperdown, merino, teal family, william herbert teal, daisy teal, daisy davis, waistcoat, man's waistcoat, vest, wedding, handmade vest, wedding clothes

Handmade ivory coloured cotton full length night gown. Front has yoke of diagonal pieces of lace with cut work and floral patterns, squares, embroidered flowers with horizontal lace pieces across shoulders. The top edge of the skirt has an edge of lace with square shapes and centre flowers of cut work across the front and back. The back has five 1cm tucks on either side of centre that extend 5cm below the lace edge. The high front neckline is square and the high back neckline is rounded. The neckline is edged with cotton broderie lace and insert lace with cream coloured satin ribbon threaded through. Below the decorative lace strip at the front is a section of fine pintucking 12cm on either side of centre and 9cm below lace strip. The night dress has a front opening extending 31cm from the throat. It has a placket with two button holes 10cm and 20cm from the throat. Two buttons on other side. No fastening at throat. French side seams. Long set-in sleeves with two rows of lace and three rows of pintucks extending from shoulder down top of sleeve to wrist. A piece of insert lace at wrist. A frilled cuff of broderie lace widening from 9cm at inside seam to 12cm at outside edge, machine stitched.costume, female underwear, nightgown

Full length cream synthetic fabric wedding dress with long sleeves and a train. Front and back have a yoke of lace. Three quarter length sleeves are made of the same lace with roulette trim at hem. Inner and outer edges of sleeves ruched for 3 cm. High round neck at back. V neckline at front. Front of bodice has two side darts and two under bust darts. Bodice at waist line has three decorative scallops at front and back. Synthetic fabric of bodice has woven fabric backing. Side opening on left hand side is fastened with nine press studs. Full length skirt of lighter weight opaque synthetic fabric has centre seams at front and back. Fabric is cut on the bias to form a 360? full circle skirt with a train at centre back. An additional section of fabric is attached at either side to complete the circle. At centre back of the skirt is an inverted pleat to create fullness for the train. Hemline is edged with lace with four rows of tucks above the hem, 1 cm apart. Separate petticoat of heavier woven synthetic fabric attached at waist. Petticoat cut on the bias to create 360? full circle skirt with inverted pleat at centre back to create fullness. Narrow turned over hem. Petticoat skirt dips to a V shape at centre front and back seams. Machine stitched.costume, female ceremonial, wedding dress

Long sleeves, with gathering at the elbow to allow movement. Finished at the wrist with two eleven cm deep frills, edged with two cm wide navy blue, cotton fringing. A four cm deep gathered frill edges the high round neckline, with a narrow piping finishing the neckline seam. Two panels at the front extend from the shoulders,to the peaked waistline. These are gathered at the shoulders, edged in navy blue fringing, and the waistline edge has the gathers alternately stitched together to form a hook and eye fasteners. A fine piping defines the peaked waistline. Bodice fully lined with cream cotton fabric. Armhole/sleeve seam finished with a fine piping.Skirt has been hand stitched into tight tiny pleats. Skirt is fully lined with cream linen, and is edged at the hemline, with one cm soft green braid. Centre front of skirt has a panel extending from the peak of the waistline, where it is 5.5cm wide to the hemline, where it is 20cm wide. This panel is edged in the navy blue fringing, and is attached to the skirt at approx 15-18 cms. Panel is fully lined with cream linen. At approx. 9-10cm spaces a 4cm fabric frill and an angled band of the navy fringing. This gives a ''ladder-like'' effect. Sleeves are bell shaped, and finished at the wrist with a 11.5cm and a 12.5cm frill, both finished with the navy fringing.costume, female, full length dress with blue fringing

these bottles were found at the old pine plantation near Forest Road Orbost.These various shaped containers are examples of glass containers used in the early 20th century.Seven bottles found at old pine plantation in north of Orbost. 2372.1 is a cylindrical Vegemite jar made of white opal glass. It has a threaded rim and two mould seams. 2372.2 is a brown beef extract jar. 2372.3 is a rounded square white Ponds jar which would have had a metal lid. 2372.4 is a brown Bovril jar and probably had a cork seal. 2372.5 is a clear perfume bottle from Rogers & Gallet Paris. It has concentric circles around the neck and a star pattern on the base.. 2372.6 is a clear glass medical bottle used by Bosisto and 2372.7 is a clear glass cordial bottle from O.T. ltd.2372.1: on base AGM above V905 above 6 2372.2: GLOBEX AGM X3 with Beef Extract on sides 2372.3 - on base PONDS with logo 2372.4 - on side- 2oz BOVRIL LIMITED F204 2372.5 - ROGERS & GALLET logo PARIS 2372.6 - on bottom - AGM ; in indented rectangle on back - BOSISTO & CO Pty Ltd. 2372.7 - at bottom - PROPERTY of O.T. LTD; on base - AGM logo F1151 M F?bottles containers jars vegemite-jar bovril-jar bosito's-bottle pond's-jar

This design of the bottle is sometimes called a ‘cottage’ or ‘boat’ shape. The Caldwell’s handmade glass ink bottle was mouth-blown into a three-piece mould, a method often used in the late 19th and early 20th centuries, with the maker's name engraved into the mould section for the base. The glass blower would cut the bottle off the end of his blowpipe with a tool and join a mouth onto the top, rolling the lip. The bottle was then filled with ink and sealed with a cork. This method of manufacture was more time-consuming and costly to produce than those made in a simple two-piece mould and 'cracked' off the blowpipe. The capacity for a bottle such as this was about 3 ½ oz (ounces) equal to about 100 ml. This particular bottle is unusual as it has four sloping indents at the corners of the shoulder, most likely for resting a pen with its nib upwards and the handle resting on a flat surface. Most of the bottles made during this era had horizontal pen rests that were indented into both of the long sides of the shoulder. Pen and ink have been in use for handwriting since about the seventh century. A quill pen made from a bird’s feather was used up until around the mid-19th century. In the 1850s a steel point nib for the dip pen was invented and could be manufactured on machines in large quantities. This only held a small amount of ink so users had to frequently dip the nib into an ink well for more ink. Handwriting left wet ink on the paper, so the blotting paper was carefully used to absorb the excess ink and prevent smudging. Ink could be purchased as a ready-to-use liquid or in powdered form, which needed to be mixed with water. In the 1880s a successful, portable fountain pen gave smooth-flowing ink and was easy to use. In the mid-20th century, the modern ballpoint pen was readily available and inexpensive, so the fountain pen lost its popularity. However, artisans continue to use nib pens to create beautiful calligraphy. Caldwell’s Ink Co. – F.R. Caldwell established Caldwell’s Ink Company in Australia around 1902. In Victoria, he operated from a factory at Victoria Avenue, Albert Park, until about 1911, then from Yarra Bank Road in South Melbourne. Newspaper offices were appointed as agencies to sell his inks, for example, in 1904 the New Zealand Evening Star sold Caldwell’s Flo-Eesi blue black ink in various bottle sizes, and Murchison Advocate (Victoria) stocked Caldwell’s ink in crimson, green, blue black, violet, and blue. Caldwell’s ink was stated to be “non-corrosive and unaffected by steel pens”. A motto used in advertising in 1904-1908 reads ‘Makes Writing a Pleasure’. Stationers stocked Caldwell’s products and hawkers sold Caldwell’s ink stands from door to door in Sydney in the 1910s and 1920s. In 1911 Caldwell promised cash for returned ink bottles and warned of prosecution for anyone found refilling his bottles. Caldwell’s Ink Stands were given as gifts. The company encouraged all forms of writing with their Australian-made Flo-Eesi writing inks and bottles at their impressive booth in the ‘All Australian Exhibition’ in 1913. It advertised its other products, which included Caldwell’s Gum, Caldwell’s Stencil Ink (copy ink) and Caldwell’s Quicksticker as well as Caldwell’s ‘Zac’ Cough Mixture. Caldwell stated in a 1920 article that his inks were made from a formula that was over a century old, and were scientifically tested and quality controlled. The formula included gallic and tannic acids and high-quality dyes to ensure that they did not fade. They were “free from all injurious chemicals”. The permanent quality of the ink was important for legal reasons, particularly to banks, accountants, commerce, municipal councils and lawyers. The Caldwell’s Ink Company also exported crates of its ink bottles and ink stands overseas. Newspaper advertisements can be found for Caldwell’s Ink Company up until 1934 when the company said they were the Best in the business for 40 years.This hand-blown bottle is significant for being the only bottle in our collection with the unusual sloping pen rests on its shoulder. It is also significant for being made in a less common three-piece mould. The method of manufacture is representative of a 19th-century handcraft industry that is now been largely replaced by mass production. The bottle is of state significance for being produced by an early Melbourne industry and exported overseas. This ink bottle is historically significant as it represents methods of handwritten communication that were still common up until the mid-20th century when fountain pens and modern ballpoint pens became popular and convenient and typewriters were becoming part of standard office equipment.Ink bottle; rectangular base, hand-blown clear glass bottle with its own cork. The bottle has side seams from the base to the mouth, an indented base and an applied lip. The corners of the shoulder sides have unusual diagonal grooves that slope down and outwards that may have been used as pen rests. Inside the bottle are remnants of dried blue-black ink. The glass has imperfections and some ripples on the surface. The bottle has an attached oval black label label with gold-brown printed text and border. The base has an embossed inscription. The bottles once contained Caldwell’s blend of blue black ink.Printed on label; “CALDWELL's BLUE BLACK INK” Embossed on the base "CALDWELLS"flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, ink, nib pen, writing ink, writing, copying, banks, lawyers, commerce, student, permanent ink, blue black ink, stationery, record keeping, handwriting, writing equipment, writing accessory, office supply, cottage bottle, boat bottle, mouth-blown bottle, cork seal, f r caldwell, caldwell’s ink company, albert park, south melbourne, inkstands, stencil ink, copy ink, quicksticker, zac cough mixture, three part mould, cauldwells, cauldwell's

Pure wool black and dark green check pattern suit jacket. Single-breasted fastened with three buttons (2.4cm diameter) and two press studs. Buttonholes on a placket, of fabric cut diagonally. Classic collar. Top button at throat. Back of jacket made from four pieces. Front of jacket made of three pieces on each side to form shaping. Pockets inserted to seams at waist level on both sides of the jacket. Long sleeves tapering to wrist. Pure wool. Black and green, woven in a check design A-line skirt, with a long stitched down ''plackett'' effect of fabric cut diagonally, opening to a pleat, just left of centre front.Label inside back neck, ''Hanro tailored by franchise from Handschin and Ronus Ltd Switzerland. 100% wool. 18.costume, female, hanro pure wool jacket

Clothing. This garment has been severely damaged - the waistband has been removed, and a 45 cm diameter circle has been cut from the polished cotton lining. There is also fabric damage adjacent to the internal side pocket seam, velvet binding at hem, stiffened linen lines the inside at the hemline - 20 cm deep, and a narrow binding of black velvet encircles the lower hemline. While the waistband has been partly removed, the original two metal hooks, and three metal eyes are still in place. This garment is severely damaged, but it does still give insight into the inner construction of the garment. Ten ''gores'' or sections make up the circle of this skirt.costume, female, full length black skirt

Clothing. Long pointed sleeves, fastened with one press-stud at the wrist. Full circular skirt, lined with cream, synthetic lace type fabric. Fabric of the gown is a small floral type design,in a corded style, on a fine net backing. Sleeves are not lined. Back upper bodice has a lining in a double thread net. The sweetheart neckline is edged with a fine tulle frill. Bustline panels gathered top and bottom, and joins a peaked midriff panel, 15.5 cm deep at the centre bustline. Skirt is highly gathered to this panel, at the waistline, is a full circle and extends into a small train at the back. A small 23 cm zip on the left side seam.A KEAM Creation, Regd. Melbourne.costume, female ceremonial, ivory corded lace wedding gown

Clothing. Single knife pleat on either side of front waistband, 20 cms deep fly front, with plastic zip, and metal fastener on waistband. Also evidence of an internal front tab fastening with cotton stitched button hole, but button is missing. Two side pockets sewn into side seams, and two bound pockets on either side of back -all polyester or nylon fabric. Seven 1 cm belt loops around waistband. A 3 cm wide strip of red flannel is stitched from waistband to hem on the outer side of each leg. This is over laid with a 1.2cm wide gold metal thread, decorative weave braid.AGCF 1982 (Australian Government Clothing Factory).costume, male ceremonial, marong municipal band uniform trousers

Donated by grand daughter of Edith and Ron Palmer. Bride Ellen Lidgerwood married Ron Mathers on 4 September 1937.The Best Man was the brother of the Groom, George Mathers. The bridesmaid was the sister of the groom, Miss Mathers and the flower girl was the niece of the bride, June Lidgerwood. For full family history and photos of both weddings see Supplementary File NA3817 & NA3818. Dress worn by Ellen at her wedding and Veil worn by both sisters Edith and Ellen Lidgerwood at their wedding ceremonies, Edith in 1936 (see NA3817) and Ellen in 1937Prominent Box Hill families1937 cream seersucker dress featuring a cowl neck and long sleeve, slit at shoulder to create cowl effect. Slim at lower arm to a point over the hand and fastened at seam with press stud. Bodice cut on the cross under the bust. Cut on the cross figure fitting skirt to the floor, complete with long train. On the back is a slit opening fastened with hook and eye and glass clear buttons. Below the slit are eight glass buttons with false rouleau button loops. The train is made of an added detachable piece. Veil worn at both sisters weddings but with different headdresses. Headdress has small circle of flowers and berries. See sister's wedding dress NA3817.costume, female ceremonial

Khaki coloured dress trousers with pressed seam running vertically down front and back of each leg. Two hip pockets, one on each side, with rear pocket on right side fastened by plastic button; additional pocket sits in waistline on right side. Trousers have seven loops for a belt and smaller loops for metal inserts which support a Sam Brown belt. Trousers fastened by a zipper in front and flap which secures with a plastic button on the interior. Spare button is sewn into the interior waistband. Leg hem is reinforced at front and back with strip of synthetic binding, presumably to aid against wear from rubbing on boots. Interior label on left back of waistband reads "DRY CLEAN/REPRESS ON ORIGINAL CREASES/USE DAMP CLOTH OR MEDIUM TO/HOT STEAM IRON/MENDING PATCH ATTACHED" Interior label on right back of waistband reads "ARMY NO/NAME" dress uniform, pants, australian defence force

This handmade ‘gallon’ style of bottle was generally used for storing and transporting wine and ale. Many bottles similar to this one have their bases embossed with “6 TO THE GALLON”. It is one of many artefacts recovered from unidentified shipwrecks along Victoria’s coast between the late 1960s and the early 1970s. It is now part of the John Chance Collection. The capacity of this is one-sixth of a gallon (imperial measure), which is equal to 758 ml. (American bottles were often inscribed “5 TO THE GALLON”, which is one-fifth of an American gallon, equal to 757 ml.) Contemporary home brewers can purchase new ‘6 to gallon’ bottles that hold 750 ml. and are sold in cases of 36 bottles, which is equal to 6 gallons of wine. Glass was made thousands of years ago by heating together quartz-sand (Silica), lime and potash. Potash was obtained from burnt wood, but these days potash is mined. The natural sand had imperfections such as different forms of iron, resulting in ‘black’ glass, which was really dark green or dark amber colour. The ‘black’ glass was enhanced by residual carbon in the potash. Black glass is rarely used nowadays but most beer, wine, and liquors are still sold in dark coloured glass. Glass vessels were core-formed from around 1500 BC. An inner core with the vessel’s shape was formed around a rod using a porous material such as clay or dung. Molten glass was then modelled around the core and decorated. When the glass had cooled the vessel was immersed in water and the inner core became liquid and was washed out. Much more recently, bottlers were crafted by a glassblower using molten glass and a blow pipe together with other hand tools. Another method was using simple moulds, called dip moulds, that allowed the glass to be blown into the mould to form the base, then the glassblower would continue blowing free-form to shape the shoulders and neck. The bottle was then finished by applying a lip. These moulded bottles were more uniform in shape compared to the free-form bottles originally produced. English glassblowers in the mid-1800s were making some bottles with 2-piece and 3-piece moulds, some with a push-up style base, sometimes with embossing in the base as well. Improvements allowed the moulds to also have embossed and patterned sides, and straight sided shapes such as hexagons. Bottles made in full moulds usually displayed seam seams or lines. These process took skill and time, making the bottles valuable, so they were often recycled. By the early 20th century bottles were increasingly machine made, which greatly reduced the production time and cost. This bottle is historically significant as an example of a handmade, blown inscribed glass bottle manufactured in the mid-to-late 1800s for specific use as a liquor bottle with a set measurement of one-sixth of gallon. It is also historically significant as an example of liquor bottles imported into Colonial Victoria in the mid-to-late 1800s, giving a snapshot into history and social life that occurred during the early days of Victoria’s development, and the sea trade that visited the ports in those days. The bottle is also significant as one of a group of bottles recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection of shipwreck artefacts by his family, illustrating this item’s level of historical value. Bottle, brown glass, handmade. Tall slim Gallon style liquor bottle. Applied double collar lip; square upper with flared lower. Push-up base with pontil mark and embossed inscription. Base is uneven, glass composition has imperfections.Embossed on base "6 TO THE GALLON"flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, gallon bottle, 6 to the gallon bottle, handmade, dip mould, mouth blown, pontil mark, blown bottle, liquor bottle, ale bottle, double collar, 19th century bottle, collectable

White fine cotton short sleeved blouse. The front is made of two pieces with a front opening. Each side has two darts from the waist and are slightly gathered at centre front. The front has a V shaped neckline with a border from the shoulder. The border is made up of three rows of cotton featuring drawn work patterns and embroidered flowers. The back is made of two pieces with a centre seam. The front and back pieces are attached to a casing that is attached to a peplum. The neckline is edged with lace at front and back. The front opening is fastened with three buttons and buttonholes plus three cotton tapes threaded through casings around the neckline and around the waist above the peplum.costume, female daywear, cotton blouse

Clothing. Men's cream coloured long sleeved silk shirt. Stiffened stand up collar (2 cm) with button hole at centre back and centre front. Centre front opening with placket fastened with two X one cm white buttons plus double button hole on collar with cuff link. Fabric loop at centre back below collar. Long sleeves have 7 cm turned back cuff with double button holes and white plastic cuff links. Sleeves have 18 cm openings on under side seam fastened with 1 cm button and button holes. Silk fabric has glossy self pattern of flowers and leaves.Stamped inside collar, ''15 1/2''costume, male, men's cream coloured silk shirt

Clothing. Cream cotton net, woven with a goemetric pattern of filligree diamonds and tiny squares. The garment is fully lined with the most delicate, and sheer cream silk. A peplum ettect 7 cms deep, is finished with 9.5 cm deep peak at the centre front. Two metal hooks, and stitched eyes are the only fasteners, and are located at the waistline on the peplum seam. The curved front bodice is edged with a 3.5 cm deep frill of cream net, which is finished at the outer edge with two rows of stitching in a heavier weight thread. The front bodices are gathered at the centre front to the peplum. The long sleeves are finished at the wrist, with a double frill of plain tulle, also edged with a double row of stitching, in a heavier thread.costume, female, silk and net blouse

Clothing. Mid blue/grey cotton/polyester fabric, with a round neckline, and 8.5 cm long placket at centre front, which fastens with three plastic, 1 cm diameter grey buttons. Below the placket the logo of the Celebrated Emu Creek Bush Band and the caricature of an Emu's head, are portrayed in a shield shape. A cotton tag at the back neckline gives the size XL, while a larger cotton tag has L.BAKER, 054 41 7555, perhaps the maker or the screen printer. A 7 cm long split at the lower edge of each side seam. Worn by Peter Ellis, OAM, founder and leader of the Celebrated Emu Creek Bush Band, circa 1990's.THE CELEBRATED EMU CREEK BUSH BANDcostume, male, t-shirt

Green long sleeved ladies top. Leaf green fabric with abstract patterns in grey, black, blue, yellow and orange.4 cm stand up collar. Front slit opening from throat with narrow hand stitched hem. Three 1 cm decorative metallic look shank buttons at lower end of slit. Top made from two pieces-falling straight to hipline. No shaping. On either side of side seams at hip level are three decorative metallic look shank buttons on the front and three corresponding loops on the back. If fastened together the top is pulled in and tightened at the hip level. Long sleeves are straight without shaping. Press studs at centre of openings at wrist.costume, female, ladies long sleeved top

Black, white and red long sleeved ladies jacket. Light weight nylon fabric with lines and shapes forming a geometric design. Front opening with four X 3.5 cm fabric covered shank buttons. Stand up collar with peaked extension on RHS with button hole to fasten top front button. 6 cm peplum with casing at seam joining to main pieces of jacket. Casing contains elastic to shape at waist. Front opening shaped at waist to form opening at peplum. Long sleeves with 5 cm cuffs fastened with two X 2 cm fabric covered buttons. Two vertical darts from each shoulder on front of jacket.costume, female, ladies black, white and red jacket

Baby clothes worn by Una Reynolds, member of the Society. Born 1927, died 2003.Creamy-white, fine voile baby's dress.Bodice and short sleeves in magyur (dolman) style with buckingham point lace inserts. Square neck in lace edged with lace edging gathering. Skirt with lace inserts and handkerchief hem, edged with gathered, wider buckingham point lace. Side seams of bodice and skirt are lace inserts. Back opening with two buttons and buttonholes and white cotton tape tie from lace at neck.|Bolero in same fabric and lace. Has Peter Pan collar edged and trimmed in lace with silk ribbon insert tied at neck. Sleeves and front opening edged and trimmed with lace; lower edge has handkerchief points trimmed with lace.costume, infants'

Research suggests that this dress dates from the early 1920's when elastic was first used in clothing.Deep cream cotton muslin ladies tea dress. High waisted, square neckline, elbow length sleeves edged in cotton lace. Skirt has four panels of fabric - two side panels extending around front and back, and centre panels at front and back. French seams - some stitched in pink thread - machine stitched. Centre panels have two rectangular inserts of cotton lace. Each side panel has one rectangular insert of cotton lace. Lace inserts are edged on sides with six ball passementerie buttons. Neckline and sleeves edged with cream cotton lace. Soft gathering from neckline of centre front and back. Elastic casing around waist.costume, female, ladies tea dress

Full length sleeveless dress of dark blue fabric with light blue all over embossed floral pattern. Front of bodice made from one piece with two darts from the waist. Back same as above. Square neckline formed by pleated section of fabric (upward facing knife pleats) across the front. The pleating continues on the shoulder panels at the front. 13cm wide at shoulders. The shoulder pieces continue to attach at the back bodice but widen to form a rounded collar effect on either side. At centre back where collar joins, a folded piece of fabric is attached to form two tails of a bow falling past the waist (39cm). A decorative metal clasp with three rows of diamantes is attached at the top of the bow, 7cm below the neckline. On the front bodice there are two decorative rows of diamantes below the shoulders where the shoulder piece joins the pleated section across the front. Front and back bodice dip slightly at centre. Side opening on LHS with 36cm metal zipper from armhole. Hook and eye at top. Fabric piping around waistline front and back. Skirt made of four pieces. Centre and side seams. Gathered into waist (bodice) with series of small pleats random (uneven) knife and box flat seams. Large stitches visible on front of bodice where pleated section is visible. 2cm wide strips of elastic hand stitched inside each shoulder section, attaching front and backs of bodice. Check collar attached.costume, female evening, dress

This uniform belonged to Sapper Hughes 3795948 of the Royal Australian Engineers Corps. By the date on the uniform, it is assumed that he served C 1968.This uniform has significance as an example of uniform worn by soldier ranks for daily work and dress parades.Khaki coloured short jacket with lapels, and waist band which has strap and buckle on right hand side. There are two patch pockets on the front have a box pleat down the middle and a V shaped pocket flap at the top, closing with a hidden button. The shoulder epaulets each have a plain khaki coloured button at the neck edge.The sleeves are cuffed fastened with a button however the right button is missing.There are red patches on each shoulder with navy blue text. The back of the jacket has darts stitched at the waist and at shoulder level. There are four khaki buttons down the front. The sleeve seams are bound in cotton tape which also forms a label on the back neck collar with the lining of the waist band also in a cotton twill.Stitched in navy blue on arm banners,” Royal Australian Engineers.” On inner label, “ DUNLOP NSW 1968 8405-66-025-6411 SIZE OF CHEST 35/36S MATCHING TROUSERS 29/30S WAIST DRY CLEAN ONLY CREASE UPPER HALF OF LAPELS ONLY . NAME....HUGHES ( in blue pen) ARMY NO... 3795948 (in blue pen)warrnambool rsl, royal australian engineers, hughes 3795948