Model of Melbourne tram W5 (actually a SW5) No. 812, electric model, made by Cooee Concepts Pty Ltd in China. Model packaged in a wooden packing case with a red felt base, contained within a card board outer case. The card board cover or case has a printed sheet giving details of the model and the history of the W5 Class tramcar. The wooden case has a brass plate detailing the contents. Scale 00 or 1:76. Model made from plastic and metal, with operable lights and motors with operable trolley poles, swivelling bogies, destination of St Kilda, showing route 16. Headlights function in the direction of travel. Package has manufacturing date of 2008 printed on it. Contains a plastic cover strip, plastic holder for the tram, plastic lift out strip, a printed Certificate of Authenticity, No. 335 of 700 and a folded sheet giving instructions for the use of the tram on a model tramway - up to 15V DC.trams, tramways, models, w5 class, the met, cooee models, tram 812

Tram Stop sign - made from silver painted metal bracket and cement sheet - stop No. 47. Two painted sections of white bakelite sheet - each with one number, bolted onto a metal bracket with a circular metal bracket and bolts to go around a pole. Numerals red - but have faded, off white background. See also item 3780 for another example of the numbers. Said to be from the tram stop outside Camberwell depot.trams, tramways, tram stops, camberwell, mmtb

This item is a photograph album that would have been owned by a person or family in the late 19th or early 20th centuries. In most cases (but not in this one) family photographs would have been mounted in the pages and kept as part of a family’s history. Albums such as this one, with photographs, would then become family heirlooms and treasured as such. They would have been expensive to buy at the time so were the province of the more affluent. This album, in very good condition, is beautiful, aesthetically-pleasing and redolent with the history of earlier times. This album is retained as a beautiful example of the type of photograph album that the more affluent members of society would have owned over a 100 years ago. This is a leather covered photograph album. The cover is brown with ornamental floral scrolls and ornamental gold panels. Some of the gold etching and some of the leather areas have worn away. The spine has ridged gold bands with the gold etching heavily faded. The metal clasp that closes the pages is made of silver (tarnished) and is of a decorative pattern. The sixteen pages are made of heavy stiffened cardboard and have centre cut-outs (to contain photographs). These cut-outs are oval and rectangular (arched at the top) in shape and are outlined in gold. On every second page, the cut-out is decorated with sprigs of flowers delicately painted in colour. The pages are gilt-edged. There are three loose sheets of paper which look to be original backing pieces for photographs. There are no photographs in the album.warrnambool, antiquarian, photograph, album

This metal travelling trunk belonged to David and Alice Ellis, a young couple married in Dublin in 1855. They left for Australia on the Schomberg clipper ship on October 6 that same year, joining the other passengers for the luxury sailing ship’s first voyage, bound for Melbourne, Australia. The Schomberg was grounded on a sand spit near Peterborough. All passengers and crew were safely rescued. They had been allowed to take something small with them when leaving the sinking vessel, and as such, Alice took a small can basket and coin purse. The metal trunk was also amongst the couple’s possessions, along with a pair of candlesticks and a Bible. Their trunk was later retrieved from the ship’s deck by the crew of a steamer sent from Melbourne. At that time, David was 23 years old (born in Wales, in 1832) and Alice was 26 (born in Ireland, 1829). The couple lived in Tasmania for a short period before settling in the Western Districts of Victoria. David worked as a gardener and, when land in the area was available to purchase, David and Alice claimed a selection on Noorat Road near Terang. They settled there for the remainder of their lives, expanding the property that they named, ‘Allambah’, and had six children. David died in 1911, aged 79, and Alice passed away the following year, aged 83. B, B & B. Brand: - The company was renowned for its strongly constructed and high-quality travel goods. In 1906 the company was sold and renamed Buffalo Trunk Manufacturing Co. Interestingly, the trunk maker’s promise on its printed label is certainly fulfilled: - "B B BRAND. These Goods are manufactured of the best steel sheets, and are guaranteed to give every satisfaction, and will last for years."David and Alice Ellis’s donated possessions have great significance as a group of personal belongings saved from the sinking luxury clipper ship, the Schomberg, in 1855. The strong, well-crafted metal trunk is an example of high-quality travel luggage owned by newlyweds on their journey to a new life across the world. The well-made trunk is a rare shape. It joins Flagstaff Hill’s collection of artefacts from the Schomberg shipwreck, which is listed on the Victorian Heritage Register (VHR S612). The ship has historical significance as a rare example of a large, fast clipper ship on the England to Australia run, built to carry emigrants at the time of the Victorian gold rush. The ship’s design included the technical advances needed to break sailing records between Europe and Australia. The relationship of the objects in Flagstaff Hill’s Schomberg collection allows has potential interpretation of the story of the Schomberg. The collection of objects is archaeologically significant as the remains of an international passenger ship, as it represents aspects of Victoria’s shipping history, in addition to its association with the shipwreck and the ship.Traveller's metal trunk; small brown woodgrain patterned trunk with dark red features and brass lock. This well-made strong and sturdy piece of secure hand luggage has rounded corners and sides, with the ends of the lid slightly bulbous. The lid is reinforced inside across the centre. The lid and sides have dark red metal D-shaped handles that fold down. The two hinges on the lid have their fittings inside the trunk which is hinged across the back. Two dark red painted latches secure the front along with a brass rod and lockable latch in the centre front. The metal is shaped with a group of corrugated ribs on each side of the centre, around the trunk. A white printed and lacquered label is inside the lid and has additional handwritten text. The truck was the luggage of David and Alice Ellis on the sailing ship SCHOMBERG in 1855. Printed on the label: "B B BRAND./ These Goods are manufactured of the best / steel sheets, and are guaranteed to give every / satisfaction, and will last for years." Handwritten on the label: "8/3- 7/-" (possibly meaning Eight shillings and three pence, Seven shillings)flagstaff hill maritime museum and village, great ocean road, shipwreck coast, schomberg, sailing ship, 1855, david and alice ellis, schomberg passengers, b b brand, american made, traveller's trunk, hand luggage, metal trunk, schomberg ship, 1855 shipwreck, peterborough shipwreck, ss queen, david ellis, alice ellis, allambah terang, dublin emigrants, terang presbyterian church, western district victoria, antique trunk, vintage trunk, travel goods, travelling trunk, steel trunk, tin trunk, schomberg trunk, newlyweds, b b & b, boyd boyd & boyd, pittsburgh, rare shape, luggage, vintage luggage, victorian era, travel trunk, three locks, steamer trunk

Although it’s unknown when these two photos were taken, the South African Pattern Mk IV Slotted Template Machine was in service from 1936 to 1952. The machine was used to cut slots and holes in an acetate film medium. This template was then used to fit several runs of aerial photography to ground control points at a desired scale with a substitution of the templates in the assembly. Radial slots on the templates from central holes representing the photograph’s principal point (centre) were placed over hollow metal studs mounted over control points on the scaled base sheet. The studs represented the intersection of radial lines through common points of detail of overlapping photos. A pricker was used to transfer from the photo-points to the templates. The slotted template methodology was later used as an essential aero-triangulation exercise in advance courses conducted at the School of Military Survey.These three photographs are of a slotted template machine used in aero-triangulation. The first two photographs were printed on photographic paper and are part of the Army Survey Regiment’s Collection. The photographs were scanned at 300 dpi. The third photograph was captured from a collection using a smart phone. .1) and .2) - Photo, black & white, 1936-1952. South African Pattern Mk IV Slotted Template Machine. .3) - Photo, black & white, 1936-1952. WO2 Bob Pratt operating the Slotted Template Machine. .1 and .2 –annotated on back “Slotted Template” .3P - annotated on front “COMPILATION SECTION SLOTTED TEMPLATE MACHINE WO2 BOB PRATT”royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, air survey, aerotrig

These 10 photographs were taken over two decades from the late 1950s to 1979 at the Army Survey Regiment, Fortuna, Bendigo. The two photos taken in 1961 are annotated with named personnel and the date. The other photos are not annotated with dates, locations and names of personnel, although the technicians in the last three photos taken in 1979 are positively identified. The photos were most likely taken in the Ballroom, Ante Room and Attic, Cartographic Squadron’s main production rooms on the top floor of Fortuna Villa. Scribing was the cartographic process of drafting topographic features such as drainage, relief, vegetation, roads and culture on specially coated map reproduction material. The cartographic technician scribed out the map feature such as a creek to a specified line width on the map sheet, using a tool affixed with a metal or sapphire tipped cutter.This is a set of 10 photographs of technicians scribing topographic features at the Army Survey Regiment, Bendigo. The photographs were printed on photographic paper and are part of the Army Survey Regiment’s Collection. The photographs were scanned at 300 dpi. .1) - Photo, black & white, c1950s. unidentified personnel in Cartographic Squadron .2) - Photo, black & white, c1960s. unidentified personnel in Cartographic Squadron .3) - Photo, black & white, c1960s. unidentified personnel in Cartographic Squadron Attic .4) - Photo, black & white, c1960s. Cartographic Squadron Attic .5) - Photo, black & white, Oct 1961. L to R: PTE P. Carseldine, PTE H.S. Pasley, PTE C.A. Brown, WO2 M.A. McLaren, CPL Jennifer H. Murray. Cartographic Squadron .6) - Photo, black & white, Oct 1961. CPL Jennifer H. Murray. Cartographic Squadron .7) - Photo, black & white, 1979. SPR Mick Ellis in Cartographic Squadron .8) - Photo, black & white, 1979. SPR Mark Casey in Cartographic Squadron .9) - Photo, black & white, 1979. SPR Sharon (Jones) Treble in Cartographic Squadron .10) - Photo, black & white, 1961. PTE BJ Madex. Cartographic Squadron.1 to .4 - annotated “Scribing” .5 – annotated “Scribing PTE P. Carseldine, PTE H.S. Pasley, PTE C.A. Brown, WO2 M.A. McLaren, CPL Jennifer H. Murray. Oct 1961” .6 - annotated “Scribing CPL Jennifer H. Murray. Oct 1961” .7 to .9 - annotated “Scribing” .10 – annotated “PTE Madex Oct 61”royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, carto

The AETA published calendars on an annual basis through to 2005, promoting electric transport in Public Transport. In the background is the MTOCo Tramways Building.Yields information about the AETA promotional activities.Australian Electric Traction Association (AETA) Calendar for 1968, featuring a photograph of PCC 980 in Bourke St Melbourne. Gives contact details for the AETA divisions. Stapled to the sheet is a 12 sheet preprinted calendar for 1968 with various details of holidays etc. Has metal strips top and bottom and a folded clip for hanging,pcc class, calendars, aeta, bourke st, tram 980

Two of these plates were produced to be used on trams for drivers undergoing their first day of training from the Hawthorn Tram Depot. The 6th Image is of a cutting from The Sun 5 Dec 1969 shows the purpose of the L plate in position on tram 603. Advised that by 1974, this plate was not in use,Demonstrates the MMTB advising other road users that the tram driver was under training.Metal sign, fabricated steel sheet and tube with rolled edges, with a hook welded onto the rear to fit into the tow bar hole of a tramcar. Painted yellow with a large black "L" on the front.signs, drivers, driver training, l plate, trams, tramways, tram 603

Made by the RTBU for members use.Demonstrates RTBU publicityMetal badge with a pin on the rear, formed with the Rail Tram and Bus Union logo printed on sheet of plastic and formed into the badge - featuring a bus, train and tramcar. Two copies held.rtbu, unions, badges, public transport

Edward Pyke and Jean Maurice Glauser invented this machine with the intention of enabling the easy and quiet production of Interpoint Braille. Although widely agreed to be one of the best Braille machines of its time, production of the machines was stopped during the Second World War because of rationing and high material costs. The machine has a keyboard arrangement at one end, the other end folds out to form a platform which is held up by a metal strut with rubber capping. An upward writing model, the paper feeds from the rear and passes under the space bar. The machine has no paper feed rollers. The only movement is that of the carriage that moves from left to right.Painted metal machine with metal keys that move a carriage across inserted sheets of paperRoyal National Institute for the Blind 228 Great Portland St London W1 Pyke-Glauser Braille Writer PG 48braille equipment, royal national institute for the blind

Braille hand frames and styluses were the primary way to produce Braille for over a century. The stylus was used to make a separate indentation for each dot, and the hand frame to keep dots within the same cell. Braille rows are produced from right to left. The process was very time consuming. Volunteer transcribers for the library could take an average of ½ hour to produce one page of Braille using this method. For example: “Oliver Twist” required approximately 600 sheets equating to 300 hours of work! This wooden slate, which was used to make the system portable, served as a firm base needed to sustain puncture pressure. The frame can also be slotted into both sides of the slate, thereby ensuring that the lines of Braille were straight across the page. The metal clasp at the top of the frame held the wooden which kept paper from slipping. In this example, the Rules of Membership for the Victorian Braille Writers were attached to the board.1 wooden back board with metal hand frame and stylus156 carved into wooden framebraille equipment, victorian association of braille writers

Braille hand frames and styluses were the primary way to produce Braille for over a century. The stylus was used to make a separate indentation for each dot, and the hand frame to keep dots within the same cell. Braille rows are produced from right to left. The process was very time consuming. Volunteer transcribers for the library could take an average of ½ hour to produce one page of Braille using this method. For example: “Oliver Twist” required approximately 600 sheets equating to 300 hours of work! Various metal hand frames accompanied by a metal stylus with wooden handle. Some include a wooden slate, which was used to make the system portable as a firm base was needed to sustain puncture pressure. The frame can also be slotted into both sides of the slate, thereby ensuring that the lines of Braille were straight across the page. Transcribing maths was an extremely complex task and a metal grid was utilised to reproduce graphs and diagrams.1 wooden hand frame with metal grid and metal and wooden stylus, 1 metal maths grid with metal pegs in metal container inside a brown suitcase and numerous sheets of Braille paperT.C. Coughlin 5 doz sausage rolls Wilmington Southend is written inside the lid of the suitcasebraille equipment, james murphy

Braille hand frames and styluses were the primary way to produce Braille for over a century. The stylus was used to make a separate indentation for each dot, and the hand frame to keep dots within the same cell. Braille rows are produced from right to left. The process was very time consuming. Volunteer transcribers for the library could take an average of ½ hour to produce one page of Braille using this method. For example: “Oliver Twist” required approximately 600 sheets equating to 300 hours of work! This wooden slate, which was used to make the system portable, served as a firm base needed to sustain puncture pressure. The frame can also be slotted into both sides of the slate, thereby ensuring that the lines of Braille were straight across the page. The metal clasp at the top of the frame held the wooden which kept paper from slipping. This donation includes the signature of Miss B Yoxon, who was a student that transcribed braille around the 1920's for the Victorian Association of Braille Writers, and the owner of this board and textbook. Some originals of her work and a translated letter from her friend James Grubb accompany the frame. 1 wooden board and Braille paper, with 1 Braille text bookbraille equipment, victorian association of braille writers

Braille hand frames and styluses were the primary way to produce Braille for over a century. The stylus was used to make a separate indentation for each dot, and the hand frame to keep dots within the same cell. Braille rows are produced from right to left. The process was very time consuming. Volunteer transcribers for the library could take an average of ½ hour to produce one page of Braille using this method. For example: “Oliver Twist” required approximately 600 sheets equating to 300 hours of work! This wooden slate, which was used to make the system portable, served as a firm base needed to sustain puncture pressure. The frame can also be slotted into both sides of the slate, thereby ensuring that the lines of Braille were straight across the page. The metal clasp at the top of the frame held the wooden which kept paper from slipping. Sometimes the board was labelled with organisational labels. In this example, the Rules of Membership for the Victorian Association of Braille Writers was attached, which included the costs of being a transcribing member and the length of the loan period. It is signed by Millicent Ritchie (Hon. Secretary) and Minnie H Crabb (Asst Sec and Librarian) at the base of the sheet.Brown rectangular wooden board with hinged paper clamp and metal hinged guideFree Lending Library for the Blind label is attached to boardbraille equipment, victorian association of braille writers

Braille hand frames and styluses were the primary way to produce Braille for over a century. The stylus was used to make a separate indentation for each dot, and the hand frame to keep dots within the same cell. Braille rows are produced from right to left. The process was very time consuming. Volunteer transcribers for the library could take an average of ½ hour to produce one page of Braille using this method. For example: “Oliver Twist” required approximately 600 sheets equating to 300 hours of work! This wooden slate, which was used to make the system portable, served as a firm base needed to sustain puncture pressure. The frame can also be slotted into both sides of the slate, thereby ensuring that the lines of Braille were straight across the page. The metal clasp at the top of the frame held the wooden which kept paper from slipping.Brown plastic rectangular hand frame with holes evenly spaced on either long side. Hinged Braille metal guide with space for 2 rows of Braille, each 35 cells long. braille equipment, rnib

The Department of Transport produced the Melbourne " Next Generation" G class tram badge to thank the team members involved in its design and production. As many of the team members came from Germany, the German translation was included on both sides of the card. Note from one of the production team was: "Staff from the Department of Transport and Planning – Next Generation Trams project team led a self-funded initiative to produce a commemorative badge of the Melbourne " Next Generation" G class tram. These were issued as gifts to persons involved in its design and production to mark the start of series manufacturing. The card it is mounted to is typeset in the proprietary “Network Sans” font, in both Australian English and Austrian German; including a special translated version of the Next Generation Trams Project logo. This was a gesture to recognise several key Alstom staff involved in the project being loaned from Vienna.”Demonstrates a badge featuring the Melbourne G class.Metal enamel badge with pin retaining clip attached to a printed card sheet.tramways, tramcars, g class, badge, new tramcars, alstom

This is a typewritten account of the history of Port Fairy from 1810 to 1890. It was written by William Earle (1850 -1902). In an addenda at the back of this folder there is a note from William Earle which indicates that the booklet was written in 1896 ‘as a result of a prize offered by several residents in a Schedule issued in connection with a local Industrial Exhibition, which Prize it secured’. Does this refer to the 1896-7 Warrnambool Industrial and Art Exhibition? No evidence of this has yet been found. As this folder was given to the ShipLovers Society of Victoria Library in 1963, some ten years before Earle’s history was reprinted in 1973, it is an early copy of Earle’s original work and may have been produced in the late 19th century or early 20th century. The original material was first published by the Port Fairy Gazette in 1896.This folder is of great interest as it is an early copy of Earle’s History of Port Fairy, an important historical publication. This is a black cardboard folder containing 120 typewritten foolscap pages about the history of Port Fairy 1810-1890 (written by William Earle). Inside the front cover there is a stamp of the ShipLovers Society of Victoria Library. The front cover has a sheet of white paper stuck on with adhesive tape. It has a black and white sketch of an anchor, a sailing ship and a rope. The pages are attached to the folder with four metal studs. There is a loose sheet inside with a note about the donor of the folder and a name handwritten on the front cover. ‘W.Earle’ ‘Presented by Mr Owen, Warrnambool, May/1963’ history of port fairy, william earle, shiplovers society of victoria

A wheat silo was erected on railway land adjacent to the Sunbury Station in 1967. Frank Millett handled the operations. As bulk handling was the preferred way to transport wheat, the silo gave local cereal growers to deliver their grain to the railhead. Over the years of the operation 200 grain wagons delivered wheat annually to the silo. In 1984 the silo was dismantled and removed.Cereal growing was one of the agricultural activities carried out in the Sunbury and surrounding areas for many years.A non-digital coloured photograph of a metal wheat silo being dismantled. A crane is beside the silo and two men are suspended from the crane in a basket to ensure that the sheets of iron land safely on the truck. wheat storage, silos, frank millett, cereal crops, sunbury railway station