Set of seven nickel silver MMTB Coat buttons and two brass. Buttons (approx. 22mm dia) are made by Stokes and Sons Melbourne. The badge backing piece is nickel silver or brass. They are fitted with a lug for sewing onto a jacket and have name of manufacturer stamped on rear part. Three of the Stokes and Sons badges have one two small hole,trams, tramways, melbourne tramways, uniforms, buttons, mmtb

Set of eight small silver MMTB Coat buttons with brass backs and hooks. Five of the buttons (approx. 16mm dia) are made by Stokes and Sons Melbourne and three by Buttons of Birmingham UK One of the button has a metal clip in the rear. Four large, one brass finished and three nickel silver buttons, 23mm dia. with brass backs and hooks. Two by Stokes and Sons and two by Buttons of Birmingham.trams, tramways, melbourne tramways, uniforms, buttons, mmtb

Inspector's Cap - MMTB - green cloth exterior, brown cotton interior lining with black leather pad on the inside, black leather internal hat band, black cotton hat band on exterior with a black cord at the front half of the cap terminating in two small MMTB gold metal buttons on either side, black plastic external peak and green on the inside of the cap. Hat band has two gold bands or braids around the outside of the cap. Has a manufacturers lable inside the cap - made by Mountcastle Pty Ltd of Melbourne St South Brisbane. Has two holes where the badge would have been fitted. Set of two uniform coat buttons (approx. 16mm dia) are made by Buttons of Birmingham UK. Both button have metal eye hooks on the rear. Advised of the make by Peter Hyde of the Brisbane Tramway Museum 7-1-2018.trams, tramways, uniforms, cap, buttons, inspectors, mmtb

Set of four nickel silver MMTB Coat buttons with brass backs and a sewing lug or ring on the rear. All of the items are made by Buttons of Birmingham - name stamped into the rear section. Two large - 22mm diameter and two 15mm dia. Received in a small envelope with information that they were issued by the Interim Tramway Board. The design appears to be similar or identical to that of the MMTBIn a small manila envelope "2 large and 2 small buttons issued by the (interim) Tramways Board on their uniforms of its cable tram crews"trams, tramways, melbourne tramways, uniforms, buttons, tramway board, cable trams

Each button has the logo of the Melbourne Tramway and Omnibus Co. pressed into the front of the badge - a M interwoven with a T. All made by Stokes and Sons of Melbourne. Worn by Cable Tram employeesDemonstrates buttons worn by the MTOCo staff.Set of five MTOCo coat buttons fitted with hooks - nickel plated brass - 3 large coat, 2 small sleeve or cap.trams, tramways, cable trams, mto co, buttons, uniforms

Button has the raised letters "P & M Tramway Trust" on the front of the badge and the imprint of Stokes & Sons Melbourne on the rear. Used by the Prahran and Malvern Tramways Trust for their Uniforms. See item 517 for another example.Demonstrates buttons worn by the PMTT staff.Button, brass fitted with a hook and a clip - small sleeve or cap.trams, tramways, buttons, uniforms, pmtt

Coat button - round metal with a stamped imprint of The Met logo and painted gold. Has an eyelet or ring fixed to the back and with the raised letters "Stokes and Sons".trams, tramways, buttons, the met, uniforms

Set of six large gold Coat button and four small cap buttons. Has an eyelet or ring fixed to the back and stamped either "Stokes and Sons Victoria" or "Stokes and Sons Australia" 8 additional buttons added from Ron Scholten 11-6-2022.trams, tramways, buttons, mmtb, uniforms

Uniform Trousers - MMTB - dark blue serge cloth, red stripe or bead on the outside of the trousers vertically, two front pockets, one back pocket from heavy calico cloth, belt loops, buttons for a pair of braces to be attached if needed, white cloth inner band at the top of the garment, button up fly and leather strips around the front of the trousers at the bottom where they would contact a shoe. No size markings.trams, tramways, mmtb, uniforms

The Union commenced as the Australian Tramway Employees Association in 1910. Changed its name in 1934 to the "Aust Tramway & Motor Omnibus Employees Association" so as to incorporate bus drivers of motor omnibuses. Became part of the Rail Transport Bus Union in 1993. See reference. Union members were issued with badges to indicate their membership. They were permitted to be worn on their uniforms. See item 7087 for a non-Victorian version and 915 for another example.Demonstrates a badge issued to members of the ATMOEABadge - made on a brass/gold backing with painted enamel on the front. On the central portion of the badge, had the ATMOEA logo, with the words "Vic" with red enamel backing, and on the outer edge of the badge "Aust Tramway & Motor Omnibus Employees Association" with a royal blue background. On back of badge has clip for fitting through an opening on a jacket button hole or coat lapel. On top of back of badge has number stamped in "3104" and bottom words "K. G. Luke / Melb." indicating manufacture. The second badge, has a retaining pin clip and is numbered 5541. tramways, trams, badges, personnel, unions, atmoea, employees

Manufactured for the Hawthorn Tramways Trust for use on Uniform Jackets and Great Coats. Demonstrates a button made for the HTT Set of four Coat buttons for the Hawthorn Tramways Trust - HTT - made by Stokes and Sons Melbourne. The badge backing piece is brass. It is fitted with a lug for sewing onto a jacket and has the name of the manufacturer stamped on the rear part. See item 581 for another example, smaller in diameter. tramways, trams, badges, uniforms, hawthorn, htt, buttons

Pressed metal uniform badge for the Melbourne Tramways Board, workshop staff, available all lines. Round pressed steel badge with the words "All Lines" pressed into the badge around the top portion of the badge, the word "Car Works" and number "25" pressed into the lower half of the badge -with small horizontal lines within the individual letters. Has a brass finish with the Melbourne Tramways Board logo in the lower part of the badge. On rear badge two metal lugs have been soldered onto the badge and a leather strap with a button hole cut into to enable it to be worn on a uniform. Leather strap secured with wire. Used possibly from mid 1910's when the Board was formed until it was replaced by the MMTB in 1921. Similar badges made for ESCo Ballarat by Stokes and Sons.trams, tramways, badges, employees pass, tb, workshops, tramway board

Set of three coat buttons: 1 - Small Prahran and Malvern Tramways Trust - PMTT - made by Stokes and Sons Melbourne - approx. 20mm dia. The badge backing piece is brass. 2 - Large PMTT - heavily worn - made by Stokes and Sons Melbourne - approx. 26mm dia - missing lug. 3 - MMTB button or Badge - damaged - made by Buttons of Birmingham UK - approx. 25mm dia. Each button has a backing piece on rear with a lug (except for 2) for sewing onto a jacket and have name of manufacturer stamped on rear part. "Buttons Ltd" of Birmingham, England has their trade mark, a pair of fully opened scissors.trams, tramways, mmtb, melbourne tramways, uniforms, buttons, pmtt

Pressed metal uniform badge for the Melbourne Tramways Board, Employees, available all lines. Round pressed steel badge with the words "All Lines" pressed into the badge around the top portion of the badge, the word "TRAMWAY EMPLOYEE" and number "10" pressed into the lower half of the badge -with small horizontal lines within the individual letters. Has a brass finish with the Melbourne Tramways Board logo in the lower part of the badge. On rear badge two metal lugs have been soldered onto the badge and a leather strap with a button hole cut into to enable it to be worn on a uniform. Leather strap secured with a brass rivet. Used possibly from mid 1910's when the Board was formed until it was replaced by the MMTB in 1921. Similar badges made for ESCo Ballarat by Stokes and Sons, see all Reg Items 394 and 579.trams, tramways, badges, employees, tb, mmtb, passes

Small Hawthorn Tramways Trust - HTT - made by Stokes and Sons Melbourne - approx. 20mm dia. The badge backing piece is brass. It is fitted with a lug for sewing onto a jacket and have name of manufacturer stamped on rear part.trams, tramways, melbourne tramways, uniforms, buttons, htt

Set of five nickel silver MMTB Coat buttons. Three of the buttons (approx. 22mm dia) are made by Stokes and Sons Melbourne and the two (approx. 25mm dia) are made by K. G. Luke Australasia. The badge backing piece is brass. It is fitted with a lug for sewing onto a jacket and have name of manufacturer stamped on rear part. The Stokes and Sons badges are two small holes in the rear, while the Luke's badges do not.trams, tramways, melbourne tramways, uniforms, buttons, mmtb

White baseball style cap, with a "Love your trams" symbol on the front and "Yarra Trams" logo on the rear. Velcro strap on rear. Sew with white cotton, button on top, stiff card peak to the cap.trams, tramways, cap, yarra trams

Button used by The Met on their uniform jackets with the first logo or symbol used by The Met.Demonstrates a The Met Uniform button.Button - brass - The MTA (Metropolitan Transit Authority) of The Met logo with a raised metal finish - made by Stokes Australia - approx. 23mm dia. The badge backing piece is brass. It is fitted with a lug for sewing onto a jacket and have name of manufacturer stamped on rear part. Two copies held. The second copy has a section of thread wound around the lug,"Stokes & Sons Australia" stamped on the rear.trams, tramways, melbourne tramways, uniforms, buttons, the met, mta

"Dean Swift" was in the Army Reserve. Last rank was LT.COLONEL.1.Khaki wool polyester jacket. It has four front pockets. All four pockets are missing their buttons. There are four button holes on the front - these are also missing the buttons. Epaulettes are held down with a gold button. Corps = RACT. The jacket is lined with a cream nylon material. 2. Trousers - wool/poly, khaki, zip fly, cuffless. Two side pockets, one hip pocket.1. Inside jacket on the label is typed "CAPT SWIFT". 2. Inside trousers on label "CAPT SWIFT".dean swift, army reserve, ract, passchendaele barracks trust

The post office was situated on site at this Pall Mall location from 1887 until 1997. Early on the building housed a variety of government services included sub treasury, police, water, lands, post and telegraph and quarters for the resident postmaster. With federation in 1901 the building became the Commonwealth Postmaster - General's Department's Bendigo Post Office. In 1975 postal services were taken over by the Australian Postal Commission and in 1989 Australia Post was corporatised.Colonial era postal uniform possibly worn by the Post Master at the Bendigo Post Office. Single breasted frock coat. Scarlet jacket with contrasting royal blue collar, lapel cuffs and pocket flap. Body and skirt section lined with lighter red cotton fabric, pockets lined with cream coloured cotton fabric, sleeves lined with brown, blue and white striped cotton fabric. Five brass buttons on front, two brass buttons on the top of the centre back pleat, each button with a crown and VR. Typically of frock coats of the 19th century the coat has a two distinct sections, a top jacket and skirt. The shoulder seam is bias cut and runs at an angle down the back. The back is cut in four sections and the skirt in two sections. There are no side seams in the coat, instead there is a seam placed further back than the actual side of the wearer.Any possible text on the label on inner top of collar has disappeared.australia post, city of bendigo post office, city of greater bendigo commerce

Braces, green, elastic shoulder adjustment and leather button holes.passchendaele barracks trust, braces, green

Uniform items issued to "BROWNE" Service No. F3207137.Garments - dark green colour wool and polyester fabric. 1. Jacket - Winter service dress jacket - collarless, with two curved inset pockets at hip. Four gold colour plastic buttons with shank and metal safety pin. Buttons have raised emblem "Australian Army Psychology Corps". Dark green colour polyester fabric lining. Manufacturer's label at back below neckline. White cotton label. 2. Skirt - Winter Service Dress skirt. A-line skirt, narrow waistband, five belt loops. front of skirt pair of box pleats. Rear at waist, nylon and metal zipper and dark green plastic button. Dark green colour polyester fabric lining. Manufacturers label sewn to waistband lining. 3. Belt - self fabric belt with gold colour plastic buckle. 4. Slacks - Winter Service dress slacks - full length with five belt loops, front nylon and metal zipper fly, dark green colour plastic button at waist, Manufacturer's labels two outside back. 5. Belt - self fabric belt with keeper and metal press stud. 6. Hat - Service dress hat - dark green colour fabric split brim, turned down at front and up at rear with light green colour fabric three panel crown. Light green half hat band with a rising pointed peak at front attached with black elastic. Interior - black velveteen sweatband lining, crown lining dark green polyester fabric. Manufacturer's label sewn rear lining. Manufacturer's labels - black ink print. 1.& 2. "A.G.C.F. ^/VICTORIA 1981/ 8410-66-096-5154/ SIZE 14 AVE HEIGHT/FULL HIP/ 90cm BUST/ 70 cm WAIST 100 cm HIPS/ Wool & polyester/ Garment/ NAME / SERVICE NO" With garment care instructions. Handwritten - blue ink pen "BROWNE/ F3207137" 4. " A.G.C.F. VICTORIA 1984 ^ 1984/ 8410-66-096-5173 SIZE 14 AVE HGT/ AVE HIP Waist 70 cm/ Hip 96 cm/Name/ Service No". With garment care instructions. Outside back - 'THIS TAG IS FOR IDENTIFICATION PURPOSES ONLY/ PLEASE REMOVE BEFORE WEARING" with printed and handwritten information. 6. "EMERCO VIC./ ^/ 8410-66-097-4922/ SIZE 56/ NAME/ SERVICE NO".passchendaele barracks trust, uniform, winter service dress, army, browne

1. This is a black short jacket with maroon collars. It has maroon sleeve ends. On each collar is a gold corps badge = RAMC. On the shoulders are decorative epaulettes. On them are badges of rank for a LT.COL. The word "Australia" - a gold button with Rising Sun motif. It has black polyester lining. 2. Vest. Same maroon colour. Black nylon back. Four front buttons. 1 x silver Australia motif. 2 x British Lion over Crown Motif. 1 x gold Australia motif. The vest has 2 small front pockets. 3. Trousers, black, maroon strip down outside of legs. Zip fly.uniform, ramc, passchendaele barracks trust

For use in Korean War. A note inside advises wearer that they must be worn over "drawers, pyjama type".This is one pair of knitted woollen trousers. Three button fly. The inside has a fluffy finish, the outside is smooth weave. Small cotton 'wedge' in the rear crotch area.korean war, cold weather uniform, passchendaele barracks trust

Probably WW2 era uniform.Light Khaki Jacket. Four front pockets. Top two held shut with a Bakelite button. Bottom two held shut with an internal button. The back is divided from waist down. Front held shut with five buttons - two are missing. A brass belt loop is on jacket at each hip/A sewn in label with red ink has name "Buchanan". "KB" is printed on the label.ww2, uniform, passchendaele barracks trust

Standard issue item as used by Australian servicemen during the conflict in Vietnam (1962 - 1972)Long sleeve army issue khaki coloured shirt. Six buttons on the front opening; two on pockets; two on lapels and two on sleeve cuffs.vietnam, cotton drill, button

1. Jacket - black woollen. It has four front pockets with flaps. It has one external fob pocket on right side. It is lined. There are no buttons. 2. Trousers - black. Red stripe on trousers. Button up fly. It has two hip pockets and one rear pocket. 3. Belt - black woollen. No buckle, two black buttons.2. Written inside on the pockets is name "CHADWICK" with different numbers = "609", "4956". There is a paper note in pocket (RSL Paper) - "Warren Chadwick".post ww2, army uniform, passchendaele barracks trust

1. Red woollen jacket with white facings and white cuffs. On the collars are a 38Bn NVR badge. On epaulettes are - Brass letter "R". Brass Major's badge, small brass button - motif is Australian Military Forces. The jacket is lined with red cotton. 2. Red woollen vest, cotton backing. Two small pockets, Four small brass buttons - motif is Australian Military Forces - vest lined with white cotton. 3. Black trousers, wool with a red wool stripe on outside seam (4cm wide). Button fly (6 buttons) Pockets are white cotton, waistband lining is blue and white striped cotton. Small piece of leather at bottom of trousers at back. Two side pockets. One back pocket on right. Two buttons on each side of fly (for braces) two buttons at back.3. Written on right front pocket in black ink "SULLIVAN C4".post ww2, uniform, officers mess dress, passchendaele barracks trust

This hat and hat box was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” which includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. McDade is the surname of Dr Angus’ daughter Berry (Berenice) McDade nee Angus. This had belonged to her father Dr William Roy Angus, Surgeon and Oculist (1901 –1970), who wore it on the ship T.S.S. LARGS BAY when travelling from Australia to Scotland for extended studies to be a “Fellow” of the Royal College of Surgeons in Edinburgh in 1929. This bicorn, cocked hat was worn with narrow points towards the front and back. It is decorated with flat gold braid or ‘lace’ with a geometrical design. Regimental lace was worn on the uniform and headdress of regimental officers in the 19th century. Gold lace chevrons were worn on coats to signify rank. Drummers and Foot Guards also wore regimental lace to distinguish them from other military personnel. In the late 19th century the English and Welsh infantry officers’ uniforms displayed a rose-pattern lace. The gold bullion and underlying crimson ‘eyes’ have been used to signify the rank of the owner. Crimson eyes were used for military personnel, and blue eyes were used for naval personnel. Different numbers and colours of the bullion and eyes may have been used to represent different military ranks. The Regulations specify nine tassels and eleven underlying eyes but there could have been variations. We have not yet identified the rank for this particular hat but hats such as this were part of the Australian and British naval uniforms in the early 20th century. The gold button’s emblem features a cross with five stars, a crown, and the motto “AUT PACE AUT BELLO,” which translates as “either in peace or in war.” Museum Victoria has a similar button and writes that buttons with this design were used by the Victorian Volunteers in the nineteenth century. The Australian War Memorial Curator of Military Heraldry advised Museum Victoria that these buttons dated from 1880 to 1892 and were worn by regular, unranked soldiers. Tasmanian Midshipman Alan Casey, who served the British and Australian Navy from 1919 to 1933 and retired as a Lieutenant Commander, owned a similar officer's bicorn hat. His hat and epaulettes are in the Tasmanian Maritime Museum's collection. The Australian War Memorial has a hat that is very similar in design, described as an “Artillery Staff Officer’s cocked had with plume, worn by Volunteer Artillery Staff in the Victorian Colonial Military Forces”. That hat is different in that it has a plume and the braid and button are silver. Berry MdDade, the donor, has used the hat many times as a dress-up hat but doesn’t know the origin of it. The hat seems to fit the design of the Staff Officers in Victorian Volunteers in Colonial times, but the button on this hat was used for unranked volunteers. Also, military uniforms usually have very clear manufacturer’s labels, as they are made by reputable companies under contract to the Defence Department. The manufacturer’s mark is not discernible on this hat. The origin, original wearer and use of this particular hat is unclear. The military bicorn cockade hat belonged to Dr William Roy Angus and is part of the W.R. Angus Collection. It is significant for still being located at the site connected to Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, as an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Black bicorn cocked hat and case. It appears to be part of a 19th-century Colonial full-dress naval officer's uniform. The long, narrow crescent-shaped hat is made of beaver fabric and the crown is lined with crimson silk and finished with a hand-stitched leather sweatband. On one flat side is a pleated black silk, lace cockade woven in the pattern of oak leaves and acorns. The cockade is overlaid with a double row of gold lace braiding secure with a Victorian Volunteer’s gold button. Wide diagonal bands of black lace braid trim are on each side of the gold braiding. The other side of the hat is plain. The front and back points of the hat each have seven gold bullion tassels with nine underlying twists of crimson ‘eyes’. The fitted metal carry case has a catch and a plaque on one side. The button bears a crown and cross with five stars and a motto. Inside the hat is a white name tag with clear adhesive over it, with black printed text with the name “Mc Dade”. The hat is part of the W.R. Angus Collection.The hat has no maker’s marks although there is a darker colour in the centre where there could have been a label. Inside the hat is taped a printed label; “Mc DADE 801 1032” Button’s emblem- a cross with five stars, under a crown, all within a buckled belt with the motto “AUT PACE AUT BELLO” [either in peace or in war] The plaque on the case has no legible marks.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dr w r angus, t.s.s. largs bay, berry mcdade, 19th century colonial military uniform, artillery staff officer’s cocked had, victorian volunteers, victorian colonial military forces, colonial militia, aut pace aut bello, cocked hat, cockade hat, bicorn hat, military bullion, oak leaves and acorns pattern, gold bullion tassels, military heraldry, w.r. angus collection., australian navy, british navy, uniform