Showing 845 items
matching tubes
-
The Ed Muirhead Physics Museum
Lyle Radiograph, 3/3/1896
"Salute to the X Ray Pioneers of Australia" by W Watson &Sons Ltd [1946] [Medical Library 610.9 WAT page 24-27 radiograph reproduction p26]Copies of the Lyle radiograph (see below) are on file with the letter (9Sept 1982) from J F Richardson (Australian Radiation Laboratory, as it was then called) detailing the description of the reproduction as follows: RADIOGRAPH OF PROFESSOR ORME MASSON'S FOOT! MOST PROBABLY THE FIRST RADIOGRAPH TAKEN IN AUSTRALIA. TAKEN BY PROFESSOR LYLE ON MARCH 3RD, 1896 USING A CROOKES DISCHARGE TUBE OF HIS OWN CONSTRUCTION -
The Ed Muirhead Physics Museum
Lyle Radiograph
Copies of the Lyle radiograph (see below) are on file with the letter (9Sept 1982) from J F Richardson (Australian Radiation Laboratory, as it was then called) detailing the description of the reproduction as follows: RADIOGRAPH OF PROFESSOR ORME MASSON'S FOOT! MOST PROBABLY THE FIRST RADIOGRAPH TAKEN IN AUSTRALIA. TAKEN BY PROFESSOR LYLE ON MARCH 3RD, 1896 USING A CROOKES DISCHARGE TUBE OF HIS OWN CONSTRUCTION -
Geoffrey Kaye Museum of Anaesthetic History
Set, Tongue Depressor
General anaesthesia relaxes muscles around the airway which can result in the airway becoming obstructed. Holding the jaw open or keeping the tongue out of the way were crucial. Often, brutal devices were used to open the jaw or pull the tongue forward to clear the airway.Set of four chrome plated metal tongue depressors of different sizes. Each depressor has been engraved with a number (1 - 4). Numbers 2 - 4 also have a metal tube that could be used to administer anaesthesia simultaneously. Numbers 2 - 3 also have cross-hatched grooves in the depressor and all have finger grips engraved into the handles.boyle-davis, airway management -
Wannon Water
Clinometre / Abney Level, E. R. Watts & Son, Clinometre
Abney Level / Clinometer is an accurate surveying tool used to measure degrees, percent of grade and topographic elevation. Used for surveying pipe lines.Instrument which consists of a fixed sighting tube, a movable spirit level connected to a pointing arm which turns and pivots. Adjustment knob/screw on top turns to rotate the compass indicator and bubble level. Arched scale graduated 0 to 90 degrees in both directions. Clinometer is housed in a brown leather case with a long leather strap for carrying around the neck.Watts London / No 70131 / Made in England -
Geoffrey Kaye Museum of Anaesthetic History
Photograph
Black and white photograph of a Boyle's anaesthetic machine. The light-coloured metal frame on castors has a metal top with a flowmeter attached to the top, and there is one drawer at the bottom of the trolley. One side of the trolley has two vaporisers connected to two corrugated tubes with a facemask. An oxygen cylinder and two nitrous oxide cylinders are on the other side of the machine along with a small cyclopropane cylinder.anaesthetic equipment, boyle's machine, anaesthetic machine, nitrous oxide, oxygen, flowmeter -
Bendigo Military Museum
Book, Find AE1 Ltd & Australian National Maritime Museum, "RESEARCH VESSEL PETREL BASELINE SURVEY OF HMAS AE1", 2018
"Research Vessel Petrel - Baseline Survey of HMAS AE1" This book is a report of a comprehensive photographic survey completed on a c.1938 submarine wreck off the coast of PNG.Soft cover book. Cover - cardboard with white print on black and dark blue background on front and spine. Illustrated with colour photographs. Front cover - "RV Petrel control room during the survey". Back cover - "AE1 bow torpedo tube". 179 pages, cut, plain, white paper. Illustrated in black and white and colour photographs, maps and technical drawings.books, ww2, submarine, png, photographic -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Insufflator associated with midwife Mary Howlett, c. 1866 - 1920, Becton Dickson & Co
This appliance can used in two different ways: externally to spray antiseptic mist on to the skin or internally on the back of the throat. Insufflator is the clinical term for spraying. This was used by a midwife in the care of mother and newborn babies. (Becton Dickson)Mary Howlett (1840-1922) began practising as a country midwife in 1866 in the western district of Victoria. She qualified as a 'ladies monthly nurse' in 1887 and continued to practise as a nurse and midwife until 1920.She began her six months training at the Melbourne Lying-In Hospital. She was known by many as 'Auntie', and her career spanned more than 50 years. Mrs Howlett's midwifery box and contents were given to Dr Frank Forster, and he donated them to the museum collection in 1993.White metal applicator, probably made from nickel plate. Consists of three sections - application cup (.1), watch spring attached to a piston and flange (.2), and a section of metal connection (.3). Applicator was originally attached to a glass tube mounted on black vulcanite by metal connections of various sizes. Inscribed 'BECTON DICKSON & CO/PAT. DEC. 06", "RUTHERFORD N.J."midwifery, infant care -
Bendigo Historical Society Inc.
Photograph - BILL ASHMAN COLLECTION: MAN STANDING BESIDE BENCH PILED WITH SCALE
Black and white photograph showing a man standing beside a bench piled with scale. The bench is held up by a couple of boxes. He is holding some pieces of scale. Written on the back is : Scale Removal from Cohuna Butter Factory Boiler 1942. 24 buoy Machine. Most of this scale was from the tubes. Much more had been taken out at previous openings.sciences, instruments - general, scalebuoy, bill ashman collection - correspondence, photograph, cohuna butter factory boiler -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Containers, Shaving cream, blue glass jar, 20thC
Shaving cream is a cream applied to the face, or wherever else hair grows, to facilitate shaving. The use of cream achieves three effects: lubricates the cutting process; swells keratin; and de-sensitizes skin. Shaving creams commonly consist of an emulsion of oils, soaps or surfactants, and water. Until the early 20th century, bars or sticks of hard shaving soap were used. Later, tubes containing compounds of oils and soft soap were sold. Newer creams introduced in the 1940s neither produced lather nor required brushes, often referred to as brushless creams. Creams that are in tubes or tubs are commonly used with a shaving brush to produce a rich lather (most often used in wet shaving). Bristol-Myers Squibb Australia Pty Ltd is a foreign owned proprietary company that obtains its revenue through the importation and distribution of pharmaceutical products. Bristol-Myers Australia is now headquartered in Mulgrave, Victoria and with an Australian presence dating back more than 80 years, Bristol-Myers Squibb Australia is a long-standing contributor to Australia’s health and economy. A blue glass jar with a screw top lid containing 'Ingrams' men’s shaving cream. Lid : Ingrams / Shaving / Cream Bottle Label : Ingrams / Concentrated / SHAVING CREAM / A LITTLE GOES A LONGER WAY / BRISTOL MEYERS CO. PTY. LTD. SYDNEY.shaving equipment, soap, safety razor, straight razor, cutthroat razors, moorabbin, bentleigh, cheltenham, early settlers, ingram pty ltd, bristol-myer squibb australia pty ltd, shaving cream, -
Federation University Historical Collection
Equipment - Projector, Mirroscope Projector, 1913 (estimated)
Inside are two light sources, which illuminate the object to be projected. Usually this object would be a postcard, photo, or other printed matter, but objects such as coins or leaves could also be projected. The light is reflected through the lens, and the image is projected onto a wall or screen. The light sources are burners. (http://museumvictoria.com.au/collections/items/721025/mirroscope-magic-lantern-projector-buckeye-stereopticon-co-1910) A lens sits at the front of a black metal box, with electricity lead. Inside two electric light bulbs illuminate the object to be projected (usually an image or printed matter), but objects such as coins or leaves could be projected. The light is reflected through the lens, and the image is projected onto a wall or screen. Focus is achieved by moving the telescoping lens tube in or out. The mirroscope includes an early electricity socket.projector, magic lantern, episcope, mirroscope, film, theatre, entertainment, movie -
Frankston RSL Sub Branch
Memorabilia - Level, Abney
Square gunsight telescope.An Abney level and clinometer, is an instrument used in surveying which consists of a fixed sighting tube, a movable spirit level that is connected to a pointing arm, and a protractor scale. An internal mirror allows the user to see the bubble in the level while sighting a distant target. It can be used as a hand-held instrument or mounted on a Jacob's staff for more precise measurement, and it is small enough to carry in a coat pocket -
Warrnambool and District Historical Society Inc.
Soda Sypon, John Fletcher/Ralph Reeves, J. F. Fletcher, Mid 20th century (contents of bottles)
These two soda syphons were used to dispense soda water. They are marked ‘J. Fletcher’ with one of the bottles having the extra label of ‘Reeves’. The bottles come from the cordial factory in Koroit Street, Warrnambool. John Fletcher worked as a young boy in Rowley’s cordial factory in Banyan Street, Warrnambool and then worked for John Davis who had established the Union Cordial Factory in Koroit Street in the 1860s. John Fletcher bought the Davis business in 1885 and operated this factory until 1930. He then sold to Ralph Reeves who initially used the Fletcher bottles and syphons. At least one of these syphons comes from the Koroit Street factory during the proprietorship of Ralph Reeves.These soda syphons are of interest as they come from a local Warrnambool cordial factory in Koroit Street. Cordial manufacturing was an important industry in Warrnambool for over100 years. These are two soda syphons made of glass with heavy round bases and ridged surfaces on the bottle bodies. The metal tops contain the pump and valve mechanisms and the inside of the bottles have glass tubes attached to the top mechanisms. The sides of the bottle have the Fletcher trade mark symbol of the stylized letters J and F, Both metal tops are corroded. Both bottles contain a small amount of liquid.‘J. Fletcher’ “J. Fletcher Trade Mark Warrnambool’ ‘Soda Water’ ‘This syphon is the property of John Fletcher Warrnambool and cannot be legally used by others’ ‘British Syphon Co. Ltd. London Reg. No 762’. ‘Reeves Soda Water’ (one bottle only) cordial manufacturing in warrnambool, history of warrnambool -
Tennis Australia
Racquet, Circa 1950
A badminton racquet with wooden head and handle, and metal shaft, reinforced with conical plastic tubes. Shoulders and shaft feature string whipping, and handle features rubber grip. Model logo and emblem feature on throat on obverse, whilst head photo image of Budge features on throat on reverse. Materials: Wood, Lacquer, Nylon, Ink, Adhesive tape, Metal, Paint, Rubber, Plastic, Glue, Stringtennis -
Tennis Australia
Racquet, Circa 1950
A badminton racquet with wooden head and handle, and metal shaft, reinforced with conical plastic tubes. Shoulders and shaft feature string whipping, and handle features rubber grip. Model logo and emblem feature on throat on obverse, whilst head photo image of Budge features on throat on reverse. Materials: Wood, Lacquer, Nylon, Ink, Adhesive tape, Metal, Paint, Rubber, Plastic, Glue, Stringtennis -
Tennis Australia
Racquet, Circa 1950
A badminton racquet with wooden head and handle, and metal shaft, reinforced with conical plastic tubes. Shoulders and shaft feature string whipping, and handle features rubber grip. Model logo and emblem feature on throat on obverse, whilst head photo image of Budge features on throat on reverse. Materials: Wood, Lacquer, Nylon, Ink, Adhesive tape, Metal, Paint, Rubber, Plastic, Glue, Stringtennis -
Geoffrey Kaye Museum of Anaesthetic History
Photograph
Robert James Minnitt introduced the concept of self-administered analgesia, using an apparatus designed and built in conjunction with London scientific instrument-maker, Charles King. The Minnitt apparatus met with considerable success and led to further modifications, including the introduction of the Queen Charlotte gas-air analgesia apparatus in 1936, manufactured by the British Oxygen Company.Black and white photograph of a Minnitt gas/air analgesia apparatus, in a Queen Charlotte case. The case is standing open with the apparatus inside. A label with instructions is on the left side of the case, and the apparatus is on the right side of the case. A nitrous oxide cylinder tank and valve is connected to a small box with a regulator. A tube with a breathing mask is attached to the box. The Queen Charlotte case has hinges on the side and a handle on the top.minnitt gas air apparatus, minnitt, nitrous oxide, queen charlotte case, anaesthetic equipment -
Lorne Historical Society
Tool - Cirkut Panoramic Camera Number 5, Circa 1915
This camera was designed by William Johnston in 1904. Production began in 1905. There were many versions, the number indicated the length of film which corresponds to the width of the panorama. Originally designed for photography of large groups of people. Later it was used for landscapes. This camera was used by the local Lorne photographer William Anderson who took photographs of visitors and local scenes. William purchased Norman Brown’s photographic business in December 1899 and worked in Lorne until his death in 1948It is a large format rotating panoramic camera. A concertinaed fine leather tube with the adjustable lens is contained in a black wooden leatherette covered rectangular box. On the top is a metal winding handle, a series of weights and a carrying handle. The lens is a Gundlach - Manhattan rapid recto graph. The camera rotates on a geared tripod through 360 degrees with the film driven past the exposure slot by a clock work motor.cameras, lorne, william anderson, -
The Ed Muirhead Physics Museum
Gas X-ray Tube
The investigation of the x-ray appears early on to have been a priority research topic at the University of Melbourne’s School of Physics. This interest was sparked by the appointment in 1889 of Professor T.R. Lyle. Lyle, who was head of the school until 1915, is thought to have been the first person in Australia to have taken an x-ray photograph. A copy of this photograph can be found in the School of Physics Archive. For this particular experiment Lyle actually made his own x-ray tube. His successor, Professor Laby, continued to work with x-rays. During the 1920s Laby worked on the x-ray spectra of atoms and in 1930 he co-published with Dr. C.E. Eddy, Quantitative Analysis by X-Ray Spectroscopy. Also with Eddy, Laby produced the landmark paper Sensitivity of Atomic Analysis by X-rays. Laby went on to have an x-ray spectrograph of his own design manufactured by Adam Hilger Ltd. (see cat. No. 38). School of Physics, the University of Melbourne Cat. No. 22. Jacqueline Eager Student Projects Placement, Cultural Collections 2005 The original X-ray tubes relied on low pressure operation. The electrons and positive ions are produced in the residual gas. Positive ions are accelerated towards the cathode and release electrons which on hitting the anode produce X-rays. These early gas X-ray tubes operated satisfactory only over a narrow pressure range. Stamped Label: “NATURAL PHILOSOPHY LABORATORY/ No/ UNIVERSITY OF MELBOURNE” Stamped: “90268 M. No. 5171[??]/No. 2156[??]/ M. No. 346585.” x-ray tubes, gas x-ray tube, laby, spectroscopy -
The Ed Muirhead Physics Museum
Gas X-ray Tube, Victor
The investigation of the x-ray appears early on to have been a priority research topic at the University of Melbourne’s School of Physics. This interest was sparked by the appointment in 1889 of Professor T.R. Lyle. Lyle, who was head of the school until 1915, is thought to have been the first person in Australia to have taken an x-ray photograph. A copy of this photograph can be found in the School of Physics Archive. For this particular experiment Lyle actually made his own x-ray tube. His successor, Professor Laby, continued to work with x-rays. During the 1920s Laby worked on the x-ray spectra of atoms and in 1930 he co-published with Dr. C.E. Eddy, Quantitative Analysis by X-Ray Spectroscopy. Also with Eddy, Laby produced the landmark paper Sensitivity of Atomic Analysis by X-rays. Laby went on to have an x-ray spectrograph of his own design manufactured by Adam Hilger Ltd. (see cat. No. 38). School of Physics, the University of Melbourne Cat. No. 22. Jacqueline Eager Student Projects Placement, Cultural Collections 2005 The original X-ray tubes relied on low pressure operation. The electrons and positive ions are produced in the residual gas. Positive ions are accelerated towards the cathode and release electrons which on hitting the anode produce X-rays. These early gas X-ray tubes operated satisfactory only over a narrow pressure range. Manufacturer’s mark stamped: “PATENTED/ VICTOR/ TRADEMARK/ MADE IN BOSTON U.S.A./ TUNGSTEN” A white circular stamp, stamped near the manufacturer’s mark: “[illegible]TER WIGGH[illegible]” Stamped label: “NAT. PHIL. LAB./ No./ UNIV. OF MELB.” Inscription on the end face of the copper piece: “PAT. SEP 5’ 11 DEC. 30’13/ JUNE 23, 14 NOV. 30.15/ 43835” -
Wodonga & District Historical Society Inc
Functional object - Bicycle Tool and Repair Kit, c1935
The first bicycles arrived in Australia in the 1860s. They gradually gained in popularity and by the 1890s they offered a cheap and relatively comfortable mode of transport. Far being just a means of leisure, long distance cycle travelling became a fact of life in rural areas for people such as sheep shearers and other agricultural labourers with migratory work. The bicycle and swag travelled much of Australia on dusty dirt tracks, long before the automobile was introduced. Today the bicycle continues to be an important item for general, cheap transport, sport and leisure. Tool kits such as those shown in the item, were and important piece of equipment for bicycle enthusiasts, particularly on a longer ride where assistance may not be close by if the rider experienced a punctured tyre. John Bull Rubber Co. Ltd. was a British tyre manufacturer based in Leicester. It was established in 1906 and was originally named Leicester Rubber Company. In 1915, a new factory was built in Evington Valley Road as indicated on the repair outfit tin in this kit. It was renamed John Bull Rubber in 1934 after its popular product of the same name. In 1958, the company was acquired by Dunlop Rubber. A leather bag containing tools and 2 tins containing rubber patches to repair bicycle tyres. The bag has 2 straps and metal buckles to attach it to the back of the bicycle seat.On tin 1: "The John Bull / Repair Outfit/ John Bull Rubber Co. Ltd./ Evington Valley Mills, Leicester" On tin 2: "ZENITH Repair Outfit / For Cycle and Rubber Repairs/ Self Vulcanizing" On tin 3: Around the DUNLOP logo "Six Self Lighting/ Patch Heat Units / For Cycle Tube/ Vulcaniser"bicycle history, bicycle repairs, john bull rubber, cycling leisure -
Flagstaff Hill Maritime Museum and Village
Functional object - Industrial Platform Scales, Fairway Scale and Tube Company, 1947-1950
The origins of Fairway Scale and Tube Company are unclear, their catalogue from 1947 advertises the subject item as model "1055". We also known the company went into business with the Howe Scale Co of Rutland Vermont, USA in 1962 at the Braybrook premises in Melbourne Vic. At the present time that is all the information the writer has been able to source regards the items provenance other than the item was probably made around 1947-1950 given its listing in the company 1947 catalogue.The item is significant as it was part of Melbourne manufacturing history producing industrial and domestic style scales during the late 19th and early part of the 20th century.Fairway Platform Scales, Black cast ironEmbossed Fairway Scale Co Melbournewarrnambool, platform scales, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, platform scales, fairway scales, howe scales, industrial platform scale model 1055 -
Puffing Billy Railway
George and George multi tube under fired boiler, 1929
Boiler purchased by Malvern city council to supply steam to a stationary vertical engine that drove a stone crusher. Built by George and George Pty. Ltd., Melbourne in 1929, it is an external under-fired return-flue type 18 tube boiler capable of supplying steam at 100 pounds per square inch (600 kPa). This boiler can be occasionally seen in steam at the Museum supplying steam for the operation of stationary engines on display near by. Donated by Malvern City Council in 1969. Historic - Industrial Steam Boiler EquipmentSteel, Cast IronGeorge and George Pty Ltd, Melbourne 1929george and george, malvern, steam, boiler, stone crusher, puffing billy -
Orbost & District Historical Society
knitted jumper, 1938-1940
This was knitted by Marjorie Burton during WW11 in England. She used to knit while in an air raid shelter escaping the bombing with her young daughter. Air raid shelters were built specifically to serve as protection against enemy air raids. However, pre-existing structures such as underground stations (tube or subway stations), tunnels, cellars in houses or basements in larger establishments, and railway arches, above ground, were suitable for safeguarding people during air raids. This item is an example of a handcrafted item and reflects the handcraft skills of women necessary during WW11 when clothing became scarce. Clothes rationing began on June 1, 1941, two years after food rationing started. Clothes rationing ended on 15 March 1949.A hand-knitted orange/tan woolen jumper. It is a lady's long-sleeved jumper.handcraft knitting ww11 -
Federation University Historical Collection
Book, Industrial Electricity
The book was published for the use of personnel of the army, navy, marine corps and coast guard. The book was used by Charles Bacon who studied at the University of Nevada in the late 1930s/early 1940s. Bacon worked at Bunker Hill Mines and Kellogg Idaho, before arriving in Australian in 1951. He worked for CN Myers, a company involved with paper converting. CN Myers was a family business (on Charles Bacon's maternal line).Blue soft covered book of 607 pages. Chapters include electrical Algebra, fundamentals of Electricity, Wiring, Magnetism, Armature Wiring, Generators, Motors, Controllers, Geometry and Trigonometry, Alternating Current, AC Circuits, Transformers, Polyphase Systems, Alternators, Induction Motors, Stator Winding, Multi-Speed Induction Motors, AC Controllers, electrical instruments, Electron Tubes, Welding Systems, Welding Systems, electrical Drawings. charles bacon, mining engineering, metallurgy, university of nevada, armed forces, world war 2 -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Tool - Minimus II sphygmomanometer used by Dr Lorna Lloyd-Green, Riester
Portable blood pressure machine with case. Device consists of an arm cuff with a tube, rubber pressure bulb and gauge. The arm cuff is made of a khaki green material, with attached velcro and an attached label that reads 'KATCH/KUFF'. Tubing and pressure bulb are made of green rubber. The pressure gauge indicates that this device is made in Germany. Case is made of black leather and the inside of thh case is reinforced with cream plastic. -
Glenelg Shire Council Cultural Collection
Drawing - Drawing, Botanical, Collin Elwyn Woolcock, Grevillea Aquifolium (Prickly Grevillea), n.d
Part of 'Woolcock Gallery Collection' Exhibited CEMA 1989.Illustration of a plant with prickly pointed leaves (holy-like) and pink flowers with thin tubular petals and yellow stamens (toothbrush-like in appearance). New leaves are at top with brown-red colouring. To mid-right of plant are two seed pods with a pink petal tube emerging from end. Mounted in double matt (faun on orange), framed under glass in gold, blue and brown wooden frame.Front: CE Woolcock (lower left) (green pencil) Back: Grevillea aquifolium (Variable Prickly Grevillea) (Sticky label, blue pen) CE Woolcock (signature)collin woolcock, botanical, woolcock collection, cema -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Mayo-Rochester needle holder used by Dr Lorna Lloyd-Green
Straight needle holder with a 'spring socket' attached to each side of the arms with a small screw. A piece of metal with three serrations is attached to the inner side of the left handle. The right handle has a similar tube of metal attached when the handles are squeezed together. The two pieces of metal lock and bring the point of the needle holder together. The handles are released by a nail-like screw on the outside of the right handle. surgery -
Robin Boyd Foundation
Slide, Robin Boyd, 1970
Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘70 in Osaka and travelled to Osaka several times in 1969-1970. Boyd designed the innovative Space Tube, which had over 25 exhibition boxes, projecting from it. Amongst the topics covered were Australian scientific innovation (including brain research, immunology, Antarctic research, Snowy Mountains Hydro-Electric Power Scheme, rainmaking, and the night sky), Australian sport, house interiors, car manufacturing, Australian music and art, and Japanese-Australian relations.Colour slide in a mount. Festival Plaza and the Tower of the Sun (in middle distance), Expo '70, Osaka, Japan. (Architect: Taro Okamoto.)Made in Australia / 1 / MAY 70M3expo 70, osaka, robin boyd, slide -
Robin Boyd Foundation
Slide, Robin Boyd, 1970
Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘70 in Osaka and travelled to Osaka several times in 1969-1970. Boyd designed the innovative Space Tube, which had over 25 exhibition boxes, projecting from it. Amongst the topics covered were Australian scientific innovation (including brain research, immunology, Antarctic research, Snowy Mountains Hydro-Electric Power Scheme, rainmaking, and the night sky), Australian sport, house interiors, car manufacturing, Australian music and art, and Japanese-Australian relations.Colour slide in a mount. Italian Pavilion, Expo 70, Osaka, Japan (Architect: Studio Valle)Made in Australia / 34 / MAY 70M3 / 26 (Handwritten)expo 70, osaka, robin boyd, slide -
Robin Boyd Foundation
Slide, Robin Boyd, 1970
Robin Boyd was appointed Exhibits Architect for the Australian Pavilion at Expo ‘70 in Osaka and travelled to Osaka several times in 1969-1970. Boyd designed the innovative Space Tube, which had over 25 exhibition boxes, projecting from it. Amongst the topics covered were Australian scientific innovation (including brain research, immunology, Antarctic research, Snowy Mountains Hydro-Electric Power Scheme, rainmaking, and the night sky), Australian sport, house interiors, car manufacturing, Australian music and art, and Japanese-Australian relations.Colour slide in a mount. Space artifacts on display in USA Pavilion, Expo 70, Osaka, Japan (Architect: Davis Brody, with designers Chermayeff & Geismar & Haviv)Made in Australia / 12 / MAY 70M3 / 39 (Handwritten)expo 70, osaka, robin boyd, slide