Showing 890 items
matching australian standard
-
Eltham District Historical Society Inc
Photograph, George Coop, The Train of Knowledge, hauled by an X-class diesel locomotive, X48, near Ballan, c.October 1982, 1982
X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballan, train of knowledge, x48, x-class diesel locomotive -
Eltham District Historical Society Inc
Photograph, George Coop, The Train of Knowledge, hauled by an X-class diesel locomotive, X48, Ballarat Railway Station, c.October 1982, 1982
X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballarat railway station, train of knowledge, x48, x-class diesel locomotive -
Eltham District Historical Society Inc
Photograph, George Coop, The Train of Knowledge, hauled by an X-class diesel locomotive, X48, Ballarat Railway Station, c.October 1982, 1982
X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballarat railway station, train of knowledge, x48, x-class diesel locomotive -
Eltham District Historical Society Inc
Photograph, George Coop, The Train of Knowledge, hauled by an X-class diesel locomotive, X48, Ballarat Railway Station, c.October 1982, 1982
X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballarat railway station, train of knowledge, x48, x-class diesel locomotive -
Eltham District Historical Society Inc
Photograph, George Coop, The Train of Knowledge, hauled by an X-class diesel locomotive, X48, Ballarat Railway Station, c.October 1982, 1982
X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballarat railway station, train of knowledge, x48, x-class diesel locomotive -
Eltham District Historical Society Inc
Photograph, George Coop, The Train of Knowledge, hauled by an X-class diesel locomotive, X48, Ballarat Railway Station, c.October 1982, 1982
X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballarat railway station, train of knowledge, x48, x-class diesel locomotive -
Eltham District Historical Society Inc
Photograph, George Coop, The Train of Knowledge, hauled by an X-class diesel locomotive, X48, Ballarat Railway Station, c.October 1982, 1982
X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballarat railway station, train of knowledge, x48, x-class diesel locomotive -
Eltham District Historical Society Inc
Photograph, George Coop, The Train of Knowledge, hauled by an X-class diesel locomotive, X48, Ballarat Railway Station, c.October 1982, 1982
X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballarat railway station, train of knowledge, x48, x-class diesel locomotive -
Waverley RSL Sub Branch
Plaque H.M.A.S. Albatross, H.M.A.S. Albatross
In July 1947, the Commonwealth Defence Council approved the formation of a Fleet Air Arm which would be controlled and operated by the RAN. The initial planning included purchase of two aircraft carriers, aircraft and establishment of shore facilities. The carriers were named HMA Ships Sydney and Melbourne, and the shore facilities were at Nowra. HMAS Albatross was commissioned in August 1948 and the 20th Carrier Air Group, comprising Sea Fury and Firefly aircraft, was brought from England to Australia by HMAS Sydney. These aircraft, operated by 805 and 816 Squadrons, disembarked to Nowra in May 1949. In November 1950, they were joined by the Carrier Air Group of 808 and 817 Squadrons, also flying Sea Furies and Fireflies. HMAS Albatross has been expanding ever since. As more capable aircraft have been acquired, so ground support facilities have had to be built. In 1955, Sea Venoms and Gannets arrived, requiring radar workshops and test facilities. More aircraft necessitated stricter standards of air traffic control and a new control tower was built in 1958. In 1964 the introduction of Wessex helicopters, with a dunking sonar capability, required a further expansion of services. In 1965, it was decided to buy American aircraft to replace the ageing British Gannets and Sea Venoms. McDonnell Douglas Skyhawks and Grumman Trackers were chosenand additional avionics facilities were built to service the complex equipment they carried. The helicopters now based at HMAS Albatross have restored to the RAN much of the anti-submarine capability lost when the Tracker squadron was disbanded in 1983. In recent years significant redevelopment has taken place, continuing the operation of HMAS Albatross and recognising its strategic importance as the sole Royal Australian Navy Air Station.Wooden Plaque 15cm x 13cm with insignia of H.M.A.S. Albatross H.M.A.S. Albatross -
Port Melbourne Historical & Preservation Society
Document - Faram Bros store, extract from Australian Heritage Database, Australian Heritage Database, 10 Jan 2007
Extract from the Australian Heritage Database taken 10 January 2007, showing details for Faram Bros Store 405-415 Bay Street. "Of Statewide importance for its verandah continuous over seven bays with raised carriageway". The verandah is of cast iron and of a standard Council design including the Council crest.built environment - commercial, business and traders - hardware, australian heritage database, faram brothers hardware, bay street -
Churchill Island Heritage Farm
Functional object - Stationary engine, red, 1925
“Sundial 2hp engine, open crank, 600rpm, serial number 6420.” These small 4 stroke engines were widely used on Australian farms through the 20th century to power chaffcutters, grinders, saws, lighting plants, pumps, shearing plants, milking machines and cream separators easing much of the drudgery of farm work. They were also used in garages and workshops and by bush fire brigades. The engine was made by H.V.McKay Massey Harris. At one time Hugh Victor McKay’s Sunshine Harvester Works was the largest factory in Australia but in 1930, to ensure survival during the Great Depression, elected to merge with the Australian arm of a Canadian firm, Massey Harris. The Sundial is fitted with twin flywheels, making it a compact and convenient power source as either wheel could double as a drive wheel. Its connecting rod, crankshaft and flywheel spokes are covered, a safety measure that was not standard at the time. These engines were advertised as simple, dependable, low in price and cheap to run. They had the additional advantage that a bolt-on kit was made by the manufacturer to convert them to run on kerosene. ‘The engine's output is two horsepower (1.5 kW) at 600 rpm. The compression ratio is 5:1 and the spark plug is activated by a high tension magneto. The fuel tank holds 3.3 litres and the cooling water hopper holds 6.6 litres. Cylinder bore is 101 mm and piston stroke is 115 mm.’ In a catalogue of HV McKay Massey Harris agricultural machinery published in March 1942, the engine is described as follows: 'The cylinder head is of the hot, turbulent type, giving the finest fuel atomisation and heat distribution. The carburettor, of special design, has an automatic air valve controlling the amount of air. The supersensitive, high speed, flyball-type governor provides an ample range of speed.'Typical of units used on local farms. RepresentativeSundial 2 h.p. engine, open crank 600 rpm Seral number 6420, red. Attached to yellow grain grinderSunshine McKay, 1939 Serial no. 6420farm machinery, stationary, machine operated, belt driven -
Port Melbourne Historical & Preservation Society
Flag - Australian flag, RSL
Given to PMH&PS by the local RSL Branch on their closure in May 1998. Displayed at the Port Melbourne RSL Sub Branch in conjunction with the British flag and Cornonation portrait of Queen Elizabeth II (item 893)Australian flag, formerly at RSL, on simple wooden standard (located between shelves 5 and 6)Signatures all over!societies clubs unions and other organisations, returned services league, rsl -
Port Melbourne Historical & Preservation Society
Flag - British flag, RSL
Given to PMH&PS by the local RSL Branch on their closure in May 1998. Displayed at the Port Melbourne RSL Sub Branch in conjunction with the Australian flag and Cornonation portrait of Queen Elizabeth II (item 893)British flag, formerly at RSL, on simple wooden standard (located between shelves 5 and 6)Signatures all over!societies clubs unions and other organisations, returned services league, rsl -
Australian Gliding Museum
Machine - Glider – Sailplane
Prior to World War II an international competition was held for design of a standard sailplane for use in Olympic competition in 1940 in Finland. The design chosen was the “Meise” from DFS in Germany and its designer Hans Jacob. The 1940 Olympics were cancelled due to the outbreak of war and post war international gliding competition has been organized as World Championships, not as an Olympic event. After the war the Meise was manufactured by firms in Europe and a few were built by amateurs from plans. In 1945, a United Kingdom firm, Chilton Aircraft Limited, revised the plans for the DFS Meise Olympia keeping its aerodynamic shape and prepared new technical drawings for the production of the Chilton Olympia. It engaged Elliotts of Newbury (a firm with aircraft production experience during the war) to built a set of wings for its prototype. The wings were made by Elliotts but it apparently refused to let Chiltons have the jigs required to build more wings. The matter was resolved by Chiltons transferring its production rights and equipment to Elliotts. Elliotts produced several batches of Olympias (the “EON Olympia”) – probably about 150 in total from 1947 including Marks 1, 2 and 3 versions (featuring some structural changes and design improvements). The Australian Gliding Museum’s Olympia is a Mark 2 (actually 2B according to the logbook) which can be distinguished by the built in main wheel and blown Perspex canopy. It was designated as serial number EON/O/34 by Elliotts. It was damaged badly at Bristol, UK, in 1949. The wreckage was acquired by a Melbourne based syndicate including Dave Darbyshire, and imported into Australia. Additional damage occurred in shipping due to the need to shorten the wings to fit them into a crate. The syndicate rebuilt the glider and re-launched it in 1956 (registration number VH-GHR). It was flown by the syndicate and several gliding clubs in Victoria and South Australia until about 1972. A potentially airworthy example of a now rare sailplane of historical importanceSingle seat wooden sailplane, partly restored.australian gliding, glider, sailplane, dfs, hans jacob, meise, olympics, eon olympia, chilton aircraft, elliotts of newbury, dave darbyshire, great eastern gliding club, barossa valley gliding club, murray bridge gliding club -
Australian Gliding Museum
Machine - Glider – Sailplane, 1953
The Schneider ES50 Club was built in 1953 and is the only one of its type. It was designed by Schneider to comply with specifications laid down by the Gliding Federation of Australia for a basic two seat training glider*. It was first flown on 10 May 1953 and delivered to the Renmark Gliding Club. The log book shows that it later passed to other gliding clubs, namely Millicent Gliding Club, Corangamite Soaring Club, Sydney Technical College Gliding Club. Overall, as at September 1967, the glider had logged over 5000 flights and a total airtime of 388 hours. The Museum volunteers have partly refurbished the ES50 to static display standard. [*Plans were also prepared for a single seat version which never eventuated] This glider is one of Edmund Schneider Pty Ltd earliest Australian designs. However, it was a later Schneider design, the ES 52 Kookaburra, which was accepted by many Australian gliding clubs for filling their need for a basic two seat training glider in the 1950s and 1960s. This is a two seat high wing aircraft of mainly wood and fabric construction. The cockpit area of the fuselage is fabric over tubular steel framing. Given serial number 3 by manufacturer and registered as VH-GHPaustralian gliding, glider, sailplane, schneider, es50, renmark gliding club, millicent gliding club, corangamite soaring club, sydney technical college gliding club -
Australian Gliding Museum
Machine - Glider – Sailplane, 1960s
The Morelli M-100S 15 metre Italian sailplane first flew in 1960 and over 220 were built in Italy and France. The design was a development of the M100 incorporating changes to fit the international rules for “Standard” class competition gliders: thus the designation “S”. The name applied to the M-100 gliders built in France was “Mesange” This example has undergone major restoration to display condition by Museum volunteers. In the main the airframe is made up of the glider serial number 69 formerly registered in Australia as VH-GUD. The restoration incorporated parts of another wrecked M100 (serial number 71). VH-GUD was previously owned by Darling Downs Soaring Club (from 28 October 1967) and Beaudesert Gliding Club (from 30 October 1971). It was test flown in Australia on 28 October 1967 and logged 1533 hours 41 minutes from 2731 launches until it crashed and was wrecked on 11 February 1978. When completely restored to display standard this exhibit will be a representative example of the Morelli M100 sailplane type Single seat sailplane of wooden construction with plywood and aircraft fabric covering.Serial Number 69australian gliding, glider, sailplane, morelli, m-100s, mesange, aeromere and avionautica rio, darling downs soaring club, beaudesert gliding club -
Australian Gliding Museum
Machine - Glider – Sailplane, 1948
The Schweizer SGS 2-12 or TG-3A as officially certificated is a glider that was designed in 1941-1942 and produced in United States of America from 1942 for training of military glider pilots. It is understood that over 100 TG-As were supplied to the USA military and at the end of the war many were sold off as surplus. Fred Hoinville imported the Museum’s TG-3A into Australia in August 1950. It is understood that it had been built in 1948 and given construction number G15. On arrival in Australia it was assembled at Bankstown aerodrome and delivered by aero-tow behind a DH Tiger Moth to Camden where Hoinville’s club, the Hinkler Soaring Club, was based. Hoinville’s TG-3A performed well at the Hinkler club in 1950-1951. Several altitude records (including a solo flight to 8000 feet by Grace Roberts – a national women’s record) were set and many soaring flight made over Camden. However, it was badly damaged in a crash landing on 15 April 1951. The glider was repaired after the crash at Camden. It is likely that modifications were made to the cockpit canopy at this time. There were three configuration tried at various times: the original dual cockpit canopy as was standard for TG3As; an unusual dual bubble canopy set up; and a single canopy over the forward seating position (in effect converting the glider to a single seater). When the glider was flown by Hoinville at the 1958 Australian Gliding Championships at Benalla, Victoria in January 1959 (refer The Age Newspaper, January 10, 1959 p.21) it had a single canopy. Records show that the glider was entered on the Australian register as VH-GDI on 6 May 1957. And the Logbook commencing in 1959 shows that ownership passed to the Port Augusta Gliding Club in South Australia on 16 August 1959. Inspections were carried out at that club and airworthiness certificates renewed in 1965. The logbook record indicates that VH-GDI had 1191 flights with an aggregate time in the air of 197 hours at the Wilmington Road Airstrip used by the Port Augusta Club. The glider was transferred to the Cooma Gliding Club, New South Wales. Flying at Cooma began in November 1966 and continued until August 1969: the glider was in the air a further 108 hours from 1067 flights. The last recorded technical inspection of the glider was conducted on 28 September 1968. The glider then passed on to Bill Riley on 20 March 1980 who stored the glider until March 2004 when it was collected by the Australian Gliding Museum. It is not clear whether the current poor state of the airframe is due to accident damage or the conditions under which it has been stored over many years or a combination of factors. Although in poor condition, this exhibit is the sole example of a TG3A ex-US military aircraft in Australia. Further the connection with the story of well-known power and glider pilot Fred Hoinville adds to its historical significance. Tubular metal framed fuselage (without covering and fittings), wooden rudder (no covering) and in damaged condition, wooden fuselage component (formers for fuselage top), Parts of control mechanism, Wooden stringers, Wooden wings without fabric covering and in damaged condition, Ailerons, Tailplane /Elevator without fabric covering, Perspex bubble canopies.australian gliding, glider, sailplane, schweizer, tg 3a, hoinville, roberts, hinkler soaring club, port augusta gliding club, cooma gliding club, riley -
Australian Gliding Museum
Machine - Glider – Sailplane, 1962
This ES Ka6 sailplane (VH-GRW, serial number 55) was built under licence from Alexander Schleicher in 1962 by Edmund Schneider Limited. It was one of 12 Ka6s, with minor variations from the Schleicher product, built by Schneiders in Australia. It was test flown at Parafield Aerodrome, Adelaide, on 8th September 1962. By way of background, the Schleicher KA 6 series of sailplanes were designed by Rudolf Kaiser in Germany. They were quite successful in the Standard Class in the late 1950s and 1960s. Over 1400 were produced. The first owner of VH-GRW was the Victorian Motorless Flight Group which, at the time, was based at Berwick Airfield on the outskirts of Melbourne. On 22 April 1972, the ownership passed to a syndicate of members from the VMFG. It again changed ownership in July 1974. The new owners were another syndicate based at Campbelltown in New South Wales. The glider went to a Tasmania syndicate in June 1976 and finally to the Soaring Club of Tasmania. In total VH-GRW recorded 3369 hours air time from 4952 launches. It was used very little after 1996. This exhibit is an example of the Scheicher Ka6 sailplane type that were built by Edmund Schneider in Australia.Plywood, spruce and fabric covered high wing single seat sailplane. The airframe has been restored to the point of repainting. Currently the fuselage, rudder and the wings aft of the main spar are coated with pink dope. The tailplane retains the white gloss finish of the glider prior to the restoration work. The cockpit to be refitted (with instruments etc). Serial number 55. The manufacture details are displayed on a metal plate fixed to the main bulkhead. australian gliding, glider, sailplane, schneider, schleicher, ka6, rhonsegler, victorian motorless flight group, soaring club of tasmania -
Australian Gliding Museum
Machine - Glider – Sailplane, 1969
The Phoebus is a fibreglass composite sailplane that was designed by H. Nagele, R. Linder and R. Eppler in the early 1960s for competition flying. It is a derivative from the Akaflieg Stuttart Phonix which was the first sailplane to be built of fibreglass. The first Phoebus, a Standard Class design with a 15 metre wingspan, flew in 1964. The Phoebus C is the open class version of the type that was introduced in 1967. It has a 17 metre wing span, retractable wheel and tail brake parachute. Several hundred Phoebus sailplanes (all versions) were made by the manufacturer Bolkow at Ottobrun in Germany before production ended in 1970. The Museum’s Phoebus C, serial number 866, was built in 1969. It was donated to the Museum by Ian Cohn in 2008. Early fibreglass design that was manufactured in numbers. The Phoebus is a modern looking single seat glass fibre sailplane with a ‘T’ tailplane. It is finished in white with light red detailing including thin red stripe on wings and some red striping on fuselage sides from nose to underneath wings.Serial number 866 on plate affixed inside cockpit – registration VH-GSW which has been painted on the sides of the fuselage rear of the wings. A Freistaat Bayern crest has been applied to each side of the vertical stabilizer. australian gliding, glider, sailplane, bolkow, phoebus, cohn, nagele, linder, eppler -
Australian Gliding Museum
Machine - Glider - Sailplane
MOBA2 is a 15 metre sailplane designed by Gary Sunderland, who was an aeronautical engineer working for the Department of Civil Aviation (Australia) and a member of the Victorian Motorless Flight Group (VMFG). The design gave effect to ideas that he developed circa 1970 for an aircraft that he could build himself. He entered a 13 metre wingspan version of his MOBA design (MOBA2B) in an Australian Gliding sailplane design competition that was announced in 1970. The competition called for sailplane designs with a maximum wingspan of 13 metres that could be built by amateurs in a small workshop with limited tools and facilities. In 1973, Gary’s MOBA was judged by the competition panel as equal best with the other outstanding submission, which were chosen from a field of 19 entrants. However, after gathering further information and deliberation by the competition panel neither of the two outstanding designs were chosen as the winner. Notwithstanding the outcome, in 1974 Gary proceeded built his glider to the original 15 metre design. The wing was equipped with camber changing flaps that were permitted under special standard class rules for the 1974 world championships. Changes were made along the way in the light of construction experience and the completed glider was given the designation MOBA2C. The glider first flew on 12 December 1979. It was never flown in standard class competition as by the time the glider was built the special 1974 rules were revoked and wing flaps were no longer permitted in that class. However, Gary flew MOBA2C in the Australian national gliding competitions held at Benalla in the summer of 1979 / 1980 competing in the open class. After adjustment to the aileron gearing during initial trials MOBA2C was found to fly well and in competition produced performances believed to be better than contemporary standard class sailplanes but not as good as the open class machines. The glider was later modified in a number of respects including amongst other things the installation of spoilers located just forward of the wing flaps and by increasing the chord marginally at the wing root. With these changes the glider type was given the designation MOBA2D. The last recorded flights occurred in February 1996 at which time MOBA2 had flown an aggregate of 401 hours and 59 minutes during its 297 launches. Its operational life was brought to an end due to expansion of the foam in the wings causing distortion of the wing surface.The MOBA2 is a notable home built 1970s sailplane design that featured a number of innovative elements including composite construction without the need for expensive jigs, nose cone canopy and asymmetrical placement of control column.Composite single seat glider / sailplane finished in bright yellowRegistration "GVI" on fuselage; Kangaroo, Australian Flag and VMFG decals on vertical stabiliseraustralian gliding, glider, sailplane, moba2b, moba2c, sunderland, moba2d, victorian motorless flight group, vmfg -
Australian Gliding Museum
Machine - Glider / Sailplane
The exhibit is the prototype Kingfisher Mark 1 (serial number 23) built by Edmund Schneider Ltd and first flown on 8 July 1956. It was first registered as VH-GDH on 3 May 1957. The ES57 Kingfisher is a small to medium size single seat glider that was designed to have similar control responses to the successful two seat trainer, the ES 52 Kookaburra, thus providing for a smooth transition for solo rated pilots to advance to a single seat machine. Edmund Schneider Ltd built nine Kingfishers and supplied kits for two more for construction by others. Harold Bradley (South Australia) built a modified Kingfisher with shoulder mounted wings. Kingfisher serial number 23 was originally owned by the Waikerie Gliding Club (South Australia) (1956 – 1959). From 1959, it had a nomadic existence in the hands of a string of owners in New South Wales, Queensland, Northern Territory and finally Queensland, again. In the early 1990s the glider was deregistered and flown as an ultralight sailplane. After a change in ownership, the glider was moved to Hervey Bay, Qld and re-registered as VH-GKN. After very limited use, the glider was sold again and placed in storage at Hervey Bay. In January 2004, the owner, who by then had moved overseas, entrusted the glider to Ian Patching and Geoff Hearn who moved it to Melbourne. Ian Patching returned the glider to flying condition in February 2004. Since then, it has been stripped and recovered with new aircraft fabric and requires finishing work. The logged hours flown for the Kingfisher total approximately 190 hours from 549 flights. The glider was donated to the Australian Gliding Museum on 3 June 2014.The Exhibit is one of the Edmund Schneider Ltd gliders that was designed and built in Australia in the late 1950s. It is one of the four Kingfishers that are known to survive – the Bradley Kingfisher and two of the standard Kingfishers are known to have been destroyed – the fates of five are unknown. Single seat high wing wooden sailplane with plywood and fabric covering, in a partly restored condition. Serial number 23australian gliding, glider, sailplane, es 57, kingfisher, patching, schneider -
Australian Gliding Museum
Machine - Glider - Sailplane, 1974
The Pilatus B4 is an all metal intermediate sailplane meeting Standard Class rules that was designed in 1966 by Ingo Herbst, Manfred Küppers and Rudolf Reinke. It did not immediately go into production. In 1972 Pilatus Aircraft of Switzerland acquired a licence to build the aircraft and began production. The PCII and PCIIA versions were semi-aerobatic. The PC11AF released in 1975 was rated as fully aerobatic. By 1980, when Pilatus sold the rights to manufacture of the aircraft to Nippi Aircraft of Japan, 322 of the Pilatus B4 had been produced. Nippi Aircraft built a further 13 and also one two seat version. The Pilatus B4 proved popular in Australia with 26 appearing on the Australian register. The Museum’s example is a basic semi-aerobatic type (Serial Number 092) that was built in 1974. It is registered as VH-GID on 8 July 1974 by H.G. Sutton of Mandura, Western Australia and flown out of the Narrogin Gliding Club in Western Australia until September 1986 when it was sold to the Albury – Corowa Gliding Club, New South Wales. In 1999 it was acquired by Michael Green and moved to Townsville, Queensland. The aircraft changed ownership again in 2004 and fell out of use for nearly 4 years. By then it had recorded 4377 hours in the air from 4304 flights. It returned to service briefly in January 2008 (5 flights totalling about 5 hours). It was donated to the Museum by David Millward of the Geelong Gliding Club, Victoria, on 10 April 2017. The aircraft is representative of a popular imported 1970s intermediate single seat sailplane design of aluminium alloy construction.Single seat sailplane of metal alloy constructionWhite colour scheme with yellow fuselage underside highlighted by blue stripe – “Pilatus B4” in black lettering on starboard side of cockpit – black anti-glare paint on the fuselage nose – Registration “GID” on the underside of port wing.australian gliding, glider, sailplane, pilatus b4, sutton, narrogin, albury, corowa, green, townsville, millward, geelong -
Deaf Children Australia
Krown Research Porta printer Plus - Phone TTY Printer, Krown Research Inc, after 1984
The Memory Printer MP20 is a telecommunication device for the deaf (TDD or text telephone) with a 20-column LED display and a 20- column built-in printer. The MP20 has an 8,000 character memory for saving and sending messages, upper and lower case printing to distinguish incoming from outgoing messages, and four message buffers. The MP20 uses standard Baudot TDD code. OPTIONS: Time/date stamping and ASCII capability are available. POWER: Rechargeable battery and AC adapter. DIMENSIONS: 9.5 x 12.5 x 2.75 inches. WEIGHT: 5.75 pounds. Instructions for printer and keyboard, etc. " KROWN / Research / PORTA PRINTER PLUS® MP 20 / The Memory Printer" on screen -
NMIT (Northern Melbourne Institute of TAFE)
Booklet: Making sense of the national competency standards, Australian National Training Authority, Making sense of the national competency standards and training packages: for library staff. 1998, 1999
This document was part of the Framing the Future project funded by the Australian National Training Authority. It outlines the need for library staff to understand the competency standards in order to support teaching staff and identify those opportunites for using the skills of library staff in supporting the delivery of training packages.This document outlines the role of library staff in the education of students. 20 pages of text. Red covers with clear plastic on front.competency standards, framing the future, training packages, nmit, -
Monbulk RSL Sub Branch
Book, David W Cameron, The battle for Lone Pine: Four days of hell at the heart of Gallipoli, 2012
Surprisingly, as we near the 100th anniversary of the legendary Gallipoli campaign, this is the first book solely dedicated to one of its key battles - that at Lone Pine, where Australian and Turkish soldiers fought an ultimately futile battle that claimed thousands of lives in incredibly close quarters. Seven Victoria Crosses were earned by Australia's Anzacs in the intense four days of fighting, in pursuit of a flawed strategy to distract Turkish forces from larger incursions, which themselves failed. David W. Cameron has pulled together first-hand accounts from the men and women involved (including from the Turkish army) to detail what transpired and to follow some of their personal stories throughout the ordeal. By including the stories of non-combatants, such as engineers, nurses, sappers, commanders and more, he not only gives due credit to those who labored in support of the troops, but provides a wider understanding of the mammoth undertaking of such warfare. Many Australians travel to the Lone Pine Memorial and Cemetery each year to commemorate Anzac Day and remember the fallen - this work of popular history highlights the fate of those who fought on the very ground where they gather. Most Australian have heard of Lone Pine. Too few know why. Over four days in August 1915, Australians and Turks were thrown into some of the fiercest fighting of the war, on a small plateau in Gallipoli known as Lone Pine. Thousands of lives were lost. Seven of Australia's nine Gallipoli VCs were earned during brutal hand-to-hand combat in dark tunnels and in trenches just metres apart, bombarded by terrifying volleys of grenades. The Battle for Lone Pine is the first book devoted to this cornerstone of the Anzac legend, drawing on unforgettable first-hand accounts scratched into diaries and letters home. The stories of the diggers, as well as the engineers, nurses, sappers, commanders and more, provide an invaluable record of the battle and serve as moving testimony to their courage in appalling conditions. Today, pine trees are planted in remembrance around Australia. In Gallipoli, the Lone Pine Cemetery and Memorial attracts large crowds to commemorate Anzac Day. David W. Cameron's absorbing history reveals the fate of those who fought on the ground where they gather. 'David Cameron not only leads the way for the battalions of books on Australia in World War I to come in the next six years, he sets a standard for authors to emulate'Index, bibliography, notes, ill, p.349.non-fictionSurprisingly, as we near the 100th anniversary of the legendary Gallipoli campaign, this is the first book solely dedicated to one of its key battles - that at Lone Pine, where Australian and Turkish soldiers fought an ultimately futile battle that claimed thousands of lives in incredibly close quarters. Seven Victoria Crosses were earned by Australia's Anzacs in the intense four days of fighting, in pursuit of a flawed strategy to distract Turkish forces from larger incursions, which themselves failed. David W. Cameron has pulled together first-hand accounts from the men and women involved (including from the Turkish army) to detail what transpired and to follow some of their personal stories throughout the ordeal. By including the stories of non-combatants, such as engineers, nurses, sappers, commanders and more, he not only gives due credit to those who labored in support of the troops, but provides a wider understanding of the mammoth undertaking of such warfare. Many Australians travel to the Lone Pine Memorial and Cemetery each year to commemorate Anzac Day and remember the fallen - this work of popular history highlights the fate of those who fought on the very ground where they gather. Most Australian have heard of Lone Pine. Too few know why. Over four days in August 1915, Australians and Turks were thrown into some of the fiercest fighting of the war, on a small plateau in Gallipoli known as Lone Pine. Thousands of lives were lost. Seven of Australia's nine Gallipoli VCs were earned during brutal hand-to-hand combat in dark tunnels and in trenches just metres apart, bombarded by terrifying volleys of grenades. The Battle for Lone Pine is the first book devoted to this cornerstone of the Anzac legend, drawing on unforgettable first-hand accounts scratched into diaries and letters home. The stories of the diggers, as well as the engineers, nurses, sappers, commanders and more, provide an invaluable record of the battle and serve as moving testimony to their courage in appalling conditions. Today, pine trees are planted in remembrance around Australia. In Gallipoli, the Lone Pine Cemetery and Memorial attracts large crowds to commemorate Anzac Day. David W. Cameron's absorbing history reveals the fate of those who fought on the ground where they gather. 'David Cameron not only leads the way for the battalions of books on Australia in World War I to come in the next six years, he sets a standard for authors to emulate'world war 1914-1918 - campaigns - gallipoli, gallipoli campaign - battles - lone pine -
Monbulk RSL Sub Branch
Book, Cambridge University Press, The proud 6th : an illustrated history of the 6th Australian Division, 1939-45, 2008
Following Mark Johnston's acclaimed illustrated histories of the 7th and 9th Australian Divisions, this is his long-awaited history of the 6th Australian Division: the first such history ever published. The 6th was a household name during World War II. It was the first division raised in the Second Australian Imperial Force, the first division to go overseas and the first to fight. Its success in that fight, in Libya in 1941, indicated that the standard established in the Great War would be continued. General Blamey and nearly every other officer who became wartime army, corps and divisional commanders were once members of the 6th Division. Through photographs and an authoritative text, this book tells their story and the story of the proud, independent and tough troops they commanded.Index, bib, ill, maps, p.269.non-fictionFollowing Mark Johnston's acclaimed illustrated histories of the 7th and 9th Australian Divisions, this is his long-awaited history of the 6th Australian Division: the first such history ever published. The 6th was a household name during World War II. It was the first division raised in the Second Australian Imperial Force, the first division to go overseas and the first to fight. Its success in that fight, in Libya in 1941, indicated that the standard established in the Great War would be continued. General Blamey and nearly every other officer who became wartime army, corps and divisional commanders were once members of the 6th Division. Through photographs and an authoritative text, this book tells their story and the story of the proud, independent and tough troops they commanded. australia - army - 6th division - history, divisional histories -
Kyneton RSL Sub Branch
WW2 Helmet
This is an example of the British Brodie Pattern Mark 11 steel helmet. This style of helmet was worn during WW2 by all three services, Army, Navy and Air Force although colour schemes did vary.An example of standard issue WW2 equipment worn by all branches of the Australian services.Camouflage green outer, webbing chin strap, black fabric adjustable lining. Metal rim around outer edge. Appears unused..ww2 equipment -
Kyneton RSL Sub Branch
Binoculars case
Pattern37 Binocular case was issued to Australian troops during WW2. This an example of standard issue equipment for WW2 soldiers.Binoculars case with single clip stud fastener. Webbing shoulder strap and hooks on the back for attachment to belt. Information regarding the item is also on display .(See second picture)Inside the lid is a stamped label which is unreadable.ww2 equipment, binocular case -
Kyneton RSL Sub Branch
Hat, Australia Army Hat, 1994
The Slouch Hat became standard issue headdress in 1903 and its brim position was mostly standardised. The slouch hat became a famous symbol of the Australian fighting man during World War One and continued to be worn throughout World War Two. Its use since that time has made it a national symbol. https://www.army.gov.au/our-history/traditions/the-slouch-hatStandard uniform issue for the Australian Army.Khaki slouch hat, has pleated hat band, brim upturned with badge on upturned brim. Crown of hat pinched inwards. Leather crown liner and leather chin strap with adjustable clip.MOUNTCASTLE 1994 Made in Australia (Broad arrow) 56 Black pen handwritten. Fullerarmy, uniform -
The Ed Muirhead Physics Museum
X-Ray Spectrograph, Laby/Hilger
The spectrograph employs the principle of single crystal Bragg X-Ray Diffraction to measure wavelengths by interpolation from accepted standard lines. It is suitable for the identification and determination of the charateristic emissions of elements and thus for X-Ray spectrum analysis. The instrument was manufactured by ADAM HILGER Ltd. to the design of Professor Laby and is the best preserved instrument surviving from his research activity. A full description is given in the Hilger Pamphlet with the instrument; alternatively see duplicate in Appendix A5,A6 in Vol 2 of Laby ‘s COLLECTED PAPERS.Laby Bibliography by R W Home “Physics in Australia 1945” pp 106-08; also reproduced by permission as Appenix C in “A Man Ahead of his TImes”By E G Muirhead References. nos 45, 41, 47, 52, 53