This Trotman’s pattern stock anchor is the southernmost anchor on display at Flagstaff Hill’s Anchor Graveyard. This large Trotman design anchor was patented in 1852 by John Trotman and was widely used on merchant ships. On April 15th 2001 around midday this anchor was raised from the seabed of Lady Bay, Warrnambool, by the crew from Birdon Dredging, who had been hired to dredge the Harbour. The spokesperson Steve Walker, who worked for the firm, said that the anchor and long chain were found after the chain became tangled in the cutter blade of the dredging equipment. The anchor was lifted from the water and onto the Breakwater then a front-end loader placed it onto a truck that then delivered it to Flagstaff Hill Maritime Museum & Village. Howard Nichol, Museum Manager at the time, had estimated the anchor to be up to 130 years old. The previous Museum Manager, Peter Ronald, who was also a diver, had identified the anchor as a Trotman’s type and similar to those used on some of the major wrecks in the region. According to Nicholl, Museum staff believed it was possible that the anchor is one of two used as a mooring line that had been used to catch driving vessels and prevent ships from washing aground on the sand bar. The mooring line was shown as a dotted line on the 1890 chart of Lady Bay, approved by Lieutenant Stanley of the British Admiralty. by Lieutenant Stanley [British Admiralty]. The location of the anchor corresponds to a point on that map and the length of the chain supports that theory. “The map is quite a detailed survey of the Bay and it shows two anchors with buoys on the ends with probably about 100 yards of chain stretched between them. The ships would drop anchor and was the chain as a snag because this was a treacherous bay before the Breakwater was built and this was a way to eliminate that problem, "said Nichol. The mooring chain was put in place to catch drifting vessels during wild stormy weather. It was identified. ABOUT TROTMAN’S ANCHORS- The British Admiralty wanted an anchor design that had more holding power. The Committee of 1852 on Anchors was appointed to assess and report on the qualities of various anchors including Trotman’s anchors. Trotman’s pattern anchor received the highest score. The anchor is similar to the Admiral’s design but features arms that pivot when the anchor settles and the upper fluke moves to rest against the shank. The anchor then sits lower, which in turn greatly reduces the chances of the anchor’s chain, cable or rope getting tangled. The top of the shank has a fitting that allows a quick release of the anchor’s chain if this becomes necessary. This Trotman’s anchor is significant as a part of the maritime history of the Port of Warrnambool regardless of whether it belonged to one of the 29 ships that were stranded or wrecked in Lady Bay. The anchor is connected to the many attempts to maintain Warrnambool as a safe and manageable port, including the various plans for the construction of the Breakwater.Anchor: an iron Trotman’s pattern style with a rectangular-section shank that is wider in the middle and has a base that extends on two opposite sides in a ‘fork prong’ manner. A crescent-shaped, double-ended arm is fitted into the base of the shank with a bolt, enabling it to pivot. Each arm has a fluke in the shape of an upward palm with an attached metal plate that forms a horn at the back of the palm. A long, round-section pipe is fitted to the top of the shank at 90 degrees to the arms; one side has an elbow bend parallel to the arms, and both ends have an attached metal sphere. The pivoting ring at the top of the shank can be lifted for a quick release of the chain.flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, anchor, mooring, trotman, lady bay, breakwater, admiralty, ship equipment, stock anchor, john trotman, 1852 patent, 2001, birdon dredging, steve walker, howard nichol, peter ronald, british admiralty, lieutenant stanley, committee of 1852 on anchors

This operating table belonged to the famous gynaecological surgeon Dr Victor Bonney and was given to Dr Frank Forster in 1953 by his widow Mrs Annie Bonnie, a distant relative of Forster's. Dr Victor Bonney (1872 - 1953) followed his father into medicine and trained at St Bartholomew's and the Middlesex Hospitals. Writing his obituary in 1953, FW Roques said of Bonney that he "'made three great gifts to surgery. First, he was the pioneer of myomectomy; second, with Berkeley, he extended and perfected Wertheim's operation for carcinoma of the cervix; and third, he devised a fine surgical technique emulated by so many of his pupils. To theatre sisters, labour-ward sisters and young house-surgeons he will always be remembered as the discoverer of 'Bonney's Blue' [antiseptic solution].'" Bonney's utilitarian, portable operating table has a round, worn scrubbed patch showing traces of his famous blue solution.This portable operating table was owned and used by pioneering gynaecological surgeon Sir Victor Bonney in London, U.K. c 1900. Dr Bonney employed two theatre sisters and had two sets of instruments and portable operating tables. This made it possible for Dr Bonney to 'complete three or more operations a day by rotating staff and equipment with a chauffeur driven Lanchester or Rolls Royce', delivering them from one house to the next. The donor of the operating table, the late Dr Frank Forster, was a distant relative of Sir Victor Bonney's widow, Annie Appleyard, formerly of Tasmania. When he visited her in the UK after Bonney's death, she offered the operating table to Dr Forster for the RANZCOG Museum. It was still in a canvas bag in the boot of one of Bonney's cars. Sir Victor Bonney was the pioneer of myomectomy, the surgical procedure for removing uterine fibroids. In collaboration with Berkeley, he extended and perfected Wertheim's operation for carcinoma of the cervix. Bonney was an influential teacher, developing and promoting conservatism of surgical technique (minimal intervention) that has had a lasting influence in modern surgical practice. To theatre-sisters, labour-ward sisters and young house-surgeons he will always be remembered as the discoverer of Bonney's Blue an antiseptic that was characteristically blue.Portable, laminated operating table. Plywood rectangular table with two laminated plywood extensions, a head board, and a foot board. At the foot board are insets of canvas straps to support a patient's ankles. Two detachable stirrup poles, each with a canvas strap attached, fit into two holes at the lower end of the table. The table is supported by two timber trellis cross braces with metal bars, and supported at the centre by a metal rod that allows the table to pivot up and down. Two metal arcs with a locking mechanism fix the table at the desired elevation, allowing a Trendelenburg tilt ( a 45 degree tilt, with the patient's head downwards.) The operating table is demountable for transportation and re-assembly.obstetric delivery

An Awl is used to make indentations in wood or other materials in order to ease the insertion of a nail or screw. The blade is placed across the fibers of the wood, cutting them when pressure is applied. The Awl is then twisted through 90 degrees which displaces the fibers creating a hole. This then gives a start to the nail or screw being inserted into the work piece. There is a difference between an Awl and a Bradawl, the Awl is a small hand-held tool with a sharpened point and a Bradawl is similar but is flattened at its tip to produce a sharp chisel edge.An everyday tool used in carpentry, the subject item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as believed to have been produced during the 20th century.Awl with wooden handle with brass ferrule & steel pointed shaftStamped on handle J McArthur (owner)flagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, awl, j mcarthur, carpenders tools, woodworking tools, nail starter

Australia informed Great Britain that would likely support the enlistment of volunteers to South Africa. The Victorian Commandant, Major General Holled Smith, a veteran of the humiliation at Majuba Hill, publicly declared his support of the idea of an Australian force.The growing idea that an ability to ride and shoot, combined with some degree of military training, was the fore-runner for the Mounted Riflemen. In the late 1890s, Major General Sir Charles Holled Smith believed that mounted rifles were 'essentially the arm for Australia. They know the country to be operated over, and they can ride'.Individual image from photographed poster of tobacco and cigarette cards.australia, great britain, south africa, volunteers, charle holled smith, majuba hill, mounted riflemen, commandant

A brochure explaining Legacy's work and providing information on how to donate. The paragraphs included: What is Legacy? Who are the members of Legacy? What kind of help does Legacy provide? How is Legacy financed? How many children is Legacy helping in Victoria? What does its help to widows and children cost Legacy? Why it necessary to provide this degree of help, when there is a generous Repatriation Act? What, shortly, is Legacy's objective in helping the children? Address given for Junior Legacy is 45 Market St, Melbourne.A record of how Legacy portrayed itself to the wider community.One page white paper, printed, folded in half. Black and white photograph and printed text.marketing, legacy promotion, fundraising

Veronica O'HEHIR After graduating with a degree in fine art and a diploma in education, Veronica established herself as a practicing and exhibiting artist in Melbourne during the ‘90s-2000s. Veronica co-founded and directed RIPE gallery then later founded and directed KRAM gallery, she was also part of the Maribyrnong River Edge Arts Movement (MREAM); the studio where she met and worked alongside Faye. This item is part of the Federation University Art Collection. The Art Collection features over 2000 works and was listed as a 'Ballarat Treasure' in 2007.Framed paintingart, artwork, veronical o'hehir, flora

Used during WWII to dim headlights making them, hopefully, invisible from the air. These were used by Mr Claude Freckleton who lived on a farm outside of Port Fairy Pair headlamp masks, with shaded glass slit - Painted blackHow to fit "G J C" approved headlamp mask Remove glass from car headlamp & mark mask to the size and shape of glass centering the glass slit and celluloid insert. Cut mask with tin snips to fit the headlamp instead of glass with this side inward towards the globe. Adjust the headlamp downward 2 degrees from the perpendicular so that the light beam strikes the road 10 feet from the front of the car. * Important - Do not alter the angle of slits over slits.world war two, headlights, car, headlight covers

A machine fitted with sharp blades, for mashing, crushing or liquefying food ingredients. i.e vitamizing. The jug, made of glass, steel, aluminium or plastic, contains rotor blades that engage with a bit protruding from the base containing an electric motor. When activated by the switch on the base the sharp rotor blades chop, mix , mince, pulverize the ingredients in the jug . The degree of mince depends on the time the motor is running. The jug is easily removed from the base to pour the mixed ingredients where needed and the rotors are safely and easily cleaned by rinsing under water.c1940, an electric, 'Vulcan' Vitamizer, with the original cloth covered flex and bake-lite lever switch at front of the cream bake-lite base . The jug- shaped chrome blender has a red, thick, rubber lid. Front: : Vulcan / LM1 Base ; VULCAN / TYPE LM1 / Patent Pending Design / Volts 220 Amps 8vitamizer, food preparation, cooking, vulcan pty ltd australia, moorabbin, bentleigh, cheltenham, ormond, housekeeping

William Lawrence Bragg was born in Adelaide in 1890. Lawrence was only fifteen years old when he started study at the University of Adelaide. In 1908 he graduated with a first-class honours degree in mathematics. He worked as a professor of physics at the University of Manchester in 1919-1938 and at Cambridge in 1938-54. He shared the Nobel Prize in 1915 with his father, Sir William Henry Bragg at the age of twenty-five "for their services in the analysis of crystal structure by means of X-rays". He died in Waldringfield, England, 1 July 1971. Red hardcovered book with black and white illustrations. At the top of title "The Crystalline State Vol. IV". 409pp [inkstamped name on front free endpaper]. The book discusses the Crystal structures of minerals, by Sir L. Bragg and G. F. Claringbull, with a chapter by W.H. Taylor.metallic crystal structures, sir lawrence bragg, g f claringbull, physics

From accompanying interpretive sign,"Early life jackets and life- rings were made using cork for bouyancy. A poignant reminder of the risks facing seafarers". Triangular and rectangular pieces of cork are from old life jackets. Curved piece with canvas remnant and white paint is a section of an old life ring. The piece with hole and split is a float off a fishing net. As cork is also used to provide buoyancy to fishing nets, further information on these fragments, such as their degree of rarity, and the historic use of cork for buoyancy in relation to lightstations and rescue equipment would be helpful. They will have second level contributory significance if it can be established that they are historically associated with the functions of the lightstation. 1. Triangular shaped piece of cork, has holes and cracks. 2. Rectangular shaped piece of cork, has large holes through piece. Remains of white textile covering on two sides (long sides). Piece is slightly convex. 3. Rectangular pieceof cork. Corners are rounded . Rough pitted surface. 4. Tube shaped section of cork. Has hole through middle with split in one side extending to hole. Around outside there are even lines extending horizontally.

A plane table compass, sometimes referred to as a trough compass, used by surveyors and artillery crew to accurately establish magnetic north. The compass is precision machined of brass material with a long needle to ensure accuracy. The compass scale is marked with a centre zero (for magnetic north) and graduations indicating plus and minus five degrees. The compass is housed in a protective wooden case with a sliding lid. The lid has a brass slide which locks the compass needle during periods when the compass is not in use. This compass is the type used by an artillery unit of the Australian Military Forces during World War 2. This compass was manufactured by J. W. Handley P/L of Melbourne in 1943. Refer 00330 and 00330.2The side of the compass body is stamped: "J.W.H." with the letter "V" under a line, "SERIAL No 1082", MARK.II-D^D-1943". The case is stamped with the serial number "1082".artillery, trough compass, plane table compass, compass, world war 2, ww2

Provenance not clear. Leather case has 'MMBW' inscribed in black pen, indicating an association with Melbourne Metropolitan Board of Works. Item has been in the possession of Terry McCormack since 1972Hand held brass pocket inclonometer level, circa 1920. Leather case for safe storage. Semi circular graduated dial with 90 degree vernier scale with a small (20mm) magnifying glass to aid reading the vernier scale. Above the body, mounted at the rear of the graduated dial, is a spirit level tube which is tilted by finger movement to the milled hand wheel. The height to be determined is sighted through the instrument eyepiece and the bubble tube is tilted until the bubble, viewed in the mirror inside the sighting tube, is brought level with the graticule sighted at the top of the subject object. An angle is thus obtained and by measuring the distance on the ground to the object, trigonometry can be applied to determine the height of the object.Herga & Co. BRISBANE. Made in England

Set of 15 mixed SEC tickets found in a tramcar being worked on at the depot c1998 (possibly No. 18 or 28), information not recorded at the time. Tickets have been used and have varying degrees of dirt. The image file shows the nature of the damage. Tickets have not been individually numbered with the Registration Number, but can be identified by their ticket number and denomination. All SEC decimal issues and all have the SEC Little boy wrapped in a towel logo on the rear: 4c - Red - C233470, C265067 7c - Green - C840774, C843332, C867617, C893422 8c - Green - A496797, A642771 13c - Black - A692706, B014514, B232404, B270271 16c- Yellow - A382386, A554006 18c - Brown - A156106trams, tramways, tickets, used tickets, secv, ballarat

Glass Everett syringe in cardboard storage box with Certificate of ExaminationTop of lid right side: Cardboard storage box - Record Type Hypodermic Syringe An Everett Product Sole Wholesale Distributors:Description The Amalgamated Dental Co. Ltd. Melbourne - Sydney Top of lid left side: The Laminex It is unnecessary to remove the piston of this syringe for sterilisation at temperatures up to 160C End of lid: 2 ml. Record 40 min. Z397-A25 Underside box lid: OCT 1955 Syringe Markings: EVERETT British made 200 degrees C Barrel increments up to 2 ml glass syringe, injection kit

Introduction by Paul Mah, Co-ordinator/Teacher. Staff listed as Kim Anderson, James Baker, Jason Grace, Sam Harmer, Alister Heighway, Paul Mah, Kate Neal, Selena Shillito, Natalie Trofimiuk. Cover design by Ashley "Cax-One" Skewes. Printed by Sovereign Press. Students have two, double-page spreads each. Final page features sponsors. Inside cover used to promote ADGD course: "The program can be completed in two years full time study, with a pathway option to the Arts Academy Graphic Design Degree program, or direct employment in the industry."Promotional catalogue for graduating students of the University of Ballarat (TAFE), Advanced Diploma of Graphic Design, 2012. Perfect/burst bound book. Black double fold cover, printed full colour plus silver foil emboss and possible matt varnish. 72-page full-colour inside pages.university of ballarat, federation university, graphic design, tafe, advanced diploma, arts academy, camp street campus

This model was found in the collection of Bay Steamers Maritime Museum. It is not knowt who created it but it is supposed that it was constructed to educate the many masters of the Wattle in the operation of a steam engine - a not so common mode of power these days. A Bay Steamers Maritime Museum examined the model in March 2012 and discovered that is was in poor repair. Using his existing knowledge, and with reference to some historic texts, he made some repairs and returned the model to working order. Here is his anaylsis of the situation as an excerpt from the Bay Steamers Maritime Museum newsletter Steamlines May 2012 "I was confronted with a model of a steam engine used years ago as a training aid for hopeful steam engineers. Already having a knowledge of steam operations, I considered a museum write-up for that model a ‘piece of cake’. However, on turning the model’s crankshaft, the valve timing seemed ‘out of kilter’ with the movement of the piston. Problem was that the two eccentrics on the crankshaft were not properly secured to it. Eventually I fastened the two eccentrics to the crankshaft where I felt that they should be and then realized that one of them had a chain-driven valve-timing device attached. This would be adjusted while an engine was running to achieve best performance and fuel economy whilst in operation by accurately controlling the period of time during which steam under pressure from the boiler would be admitted to the cylinder and give greater time for the steam to expand in the cylinder, move the piston and turn the crankshaft and thus, drive the attached apparatus. When the valves were correctly set up it was then possible to get the model to function properly.The model comprises a green section, which is the actual the model mounted on a brown painted board. There are two parts of the model, painted white representing the steam passages, and black representing the cast- iron portions of the cylinder-block casting, and of the main valve sliding between the cylinder a second sliding valve. Of the black portions, one slides back and forth being connected to a rod which is connected to an eccentric clamped to the crankshaft and is the nearer to the flywheel of two eccentrics. This eccentric is attached to the crankshaft at an angle of 90 degrees to the crank-pin attached to the flywheel. To operate the model simply turn the flywheel by means of the handle attached to its crank-pin. A second eccentric is also attached to the crankshaft, further away from the first eccentric, and it is adjusted to operate 90 degrees from the first eccentric (that is, 180 degrees from the crank-pin) A piston (painted silver) is located in a plastic cylinder and has a piston rod which passes through one end of the cylinder, (in actual practice a steam-proof gland seals the cylinder against loss of steam) terminating in a cross-head slide between four rails guiding it. From this cross-head, a connecting rod joins the piston-rod to the flywheel via the crank-pin attached to the flywheel which is part of the crankshaft. (In actual practice, a flywheel may not be used, particularly in a multi-cylinder engine.) The white portions of the model painted nearest to the cylinder represent the two steam ports cast into the main cylinder block, whilst one section painted in between those two represents the exhaust outlet (which may be connected to a condenser to conserve water, or to the open air). The main slide valve has three white-painted portions painted thereon. It has two white-painted marks representing the steam passages to the steam ports into the cylinder, and a third section in between the other two, being that part of the valve through which exhaust steam passes in line with the ports in the cylinder block. By rotating the flywheel, the operations of an engine will be observed as steam is admitted to the main valve via the gap between the two jaws of two moveable portions of a second sliding valve which is operated by the second eccentric attached to the crank-shaft. This eccentric is used to finely tune the valve timing of this model to obtain best running results of an engine. There are various methods used for reversing a steam engine. model compound steam engine, steam engine, model, crankshaft, valve, flywheel, wattle, engineer, eccentrics

Set of 4 black and white photographs of MMTB trialling overhead fittings for pantographs on the West Preston line. .1 - dummy fitting of where two overhead trolley wires cross each other at 90 degrees .2 - cross frog and signal contactor .3 - Section insulators with pantograph pan depression bars .4 - ears fitted to a curve section with a short dropping sections. Handwritten note (filed with photos) giving photo numbers, location and that sent to ET. Not dated as such. Electric Traction magazine issues for June and August 1977 - see image i5 an it advises of the pantograph trials and changes made. W2 546 had been fitted during May 1977 with a pantograph and a closed circuit camera.trams, tramways, mmtb, west preston, overhead, electrical engineering, electric traction, pantographs

This brace was used in Adelaide by Dr R. Humphrey Marten (1860-1933). he was an English general practitioner who graduated from University College Hospital in 1883. He came to Australia as custodian of a mentally deranged patient. Martins fee allowed him to return to England and obtain a degree from Cambridge. in 1888 he returned to Adelaide and became a very successful physician and surgeon, said to be the first surgeon in South Australian to remove a brain tumor in 1901. The brace was later used by Sir Leonard Lindon (1896- 1978) one of the eight founders of the Neurosurgical Society of Australasia, who had married Marten's daughter.Having been used by two important figures in surgery during the 20th century this item is an excellent representation of the brace described by Eugene Doyen (1859-1916) of Paris in 1896. It is used in conjunction with a perforator, spherical burrs and a n electric saw.Small Brace measuring 25.5 cm, from the handle to the socket. It is nickel plated.doyen, brace, lindon, marten, surgery, neurosurgery.

Photo of Harry Tinson who was winemaker at Baileys in Glenrowan from 1968 until 1982. An ageing Alan Bailey (greatgrandson of founder Richard Bailey) sold the winery to Davis Consolidated Industries (mainly a gelatine producer). At the time Harry Tinson, with a Master’s degree in physical engineering, was in the corporate planning department of Davis. The board had decided it wished to diversify into wine production and Tinson was charged with the responsibility of finding a suitable target. He came up with Baileys, and was instructed to negotiate the purchase of a 50 per cent share in the business. Bailey said “all or nothing” ! (James Halliday – news article 22/01/2011)Colour transparency photograph of a man standing in front of a timber panelled wall, featuring an advertising poster for Baileys Bundarra Vineyardswineries, north east victoria, wine industry, baileys, winemaker

Bruce Hutton of Almond Glass Works designed the stained glass window and did the hand painting for the Chapel in St John of God, Ballarat. Almond Glassworks was responsible for the overall construction and installation of the window. The concept was developed with the then head of mission, Maureen Waddington. The window was installed on the 30th of October 2019. Almond Glassworks was founded by Bruce Hutton in 1994. He completed a Fine Arts Degree (Chisholm Institute of Technology) majoring in stained glass in 1988, he then went on to work in the industry both in Australia, England and South Africa. He completed a Postgraduate (Monash University) in 1996, focusing on the conservation and restoration techniques of stained glass. Stained Glass at the St John of God Hospital Chapel .ballarat, heritage, st john of god, hospital, stained glass

Bruce Hutton of Almond Glass Works designed the stained glass window and did the hand painting for the Chapel in St John of God, Ballarat. Almond Glassworks was responsible for the overall construction and installation of the window. The concept was developed with the then head of mission, Maureen Waddington. The window was installed on the 30th of October 2019. Almond Glassworks was founded by Bruce Hutton in 1994. He completed a Fine Arts Degree (Chisholm Institute of Technology) majoring in stained glass in 1988, he then went on to work in the industry both in Australia, England and South Africa. He completed a Postgraduate (Monash University) in 1996, focusing on the conservation and restoration techniques of stained glass. Colour photograph of stained glass feature wall at the chapel in St John of God Hospital, Ballarat.stained glass, st john of god hospital, ballarat, bruce hutton, almond glass works

Bruce Hutton of Almond Glass Works designed the stained glass window and did the hand painting for the Chapel in St John of God, Ballarat. Almond Glassworks was responsible for the overall construction and installation of the window. The concept was developed with the then head of mission, Maureen Waddington. The window was installed on the 30th of October 2019. Almond Glassworks was founded by Bruce Hutton in 1994. He completed a Fine Arts Degree (Chisholm Institute of Technology) majoring in stained glass in 1988, he then went on to work in the industry both in Australia, England and South Africa. He completed a Postgraduate (Monash University) in 1996, focusing on the conservation and restoration techniques of stained glass. stained glass, st john of god hospital, ballarat

Bruce Hutton of Almond Glass Works designed the stained glass window and did the hand painting for the Chapel in St John of God, Ballarat. Almond Glassworks was responsible for the overall construction and installation of the window. The concept was developed with the then head of mission, Maureen Waddington. The window was installed on the 30th of October 2019. Almond Glassworks was founded by Bruce Hutton in 1994. He completed a Fine Arts Degree (Chisholm Institute of Technology) majoring in stained glass in 1988, he then went on to work in the industry both in Australia, England and South Africa. He completed a Postgraduate (Monash University) in 1996, focusing on the conservation and restoration techniques of stained glass. stained glass, st john of god hospital, ballarat, bishop, pectoral cross

Bruce Hutton of Almond Glass Works designed the stained glass window and did the hand painting for the Chapel in St John of God, Ballarat. Almond Glassworks was responsible for the overall construction and installation of the window. The concept was developed with the then head of mission, Maureen Waddington. The window was installed on the 30th of October 2019. Almond Glassworks was founded by Bruce Hutton in 1994. He completed a Fine Arts Degree (Chisholm Institute of Technology) majoring in stained glass in 1988, he then went on to work in the industry both in Australia, England and South Africa. He completed a Postgraduate (Monash University) in 1996, focusing on the conservation and restoration techniques of stained glass. Stained glass panel of 'Weeping Bailey's' house, now part of St John Of God Hospitalstained glass, st john of god hospital, ballarat, bailey's mansion, weeping bailey, architecture

A brochure for Legacy Albury explaining Legacy's work and providing information on how to donate. Headings in the brochure included: Whom does Legacy help? What kind of help does Legacy provide? How many dependants is Legacy actively helping in Victoria? What does Legacy spend in this State in its work? How are these funds provided? Why it necessary to provide this degree of help, when there is a generous Repatriation Act? What is Legacy's aim? Address given is ANZAC House, Dean St, Albury NSW. Reprint 1960. Also a leaflet using the same boy's photo, format changed to fit a single page without folding.A record of how Legacy portrayed itself to the wider community.00408.1 One page white paper, folded in half. Black and white photograph and printed text. 00408.2 One page white paper. Black and white photograph and printed text.marketing, legacy promotion, albury, objectives

Debbie LLOYD Debbie Lloyd returned to study in 2005 completing a Bachelor of Fine Arts (Visual Arts) degree at the University of Ballarat (now Federation University) in 2007, with honours the following year. She returned to the university as Artist in Residence in 2009. During her time at the University Debbie exhibited in many group exhibitions and her work was selected for the National Graduates Show at PICA in Western Australia. Debbie’s first solo exhibition was held at Space22 in Ballarat, towards the end of 2010. This item is part of the Federation University Art Collection. The Art Collection features over 1000 works and was listed as a 'Ballarat Treasure' in 2007.Two artworks featuring a third dimension created with folded paper. Artist's Statement: "My artwork explores the visual experience that can be achieved using black and white, lineal patterns or by creating illusion and surface movement through the simple manipulation and repetition of forms. In these works I have used everyday objects, and shapes, repeated, reconfigured and recontextualised to provide the viewer with visual challenges that slow down and complicate the reading of the work. In the words of a former lecturer of mine, who kindly delivered the opening speech at one of my exhibitions – There is in Debbie’s work a belief in the transcendental power of repetition, a tribute in many respects to the fact that human kind is defined by nothing more noble and uplifting than its ability and obligation to persist." (http://100thgallery.com/gallery/debbie-lloyd/, accessed 08 May 2018) art, artwork, debbie lloyd, available, recycling, envelopes

Bruce Hutton of Almond Glass Works designed the stained glass window and did the hand painting for the Chapel in St John of God, Ballarat. Almond Glassworks was responsible for the overall construction and installation of the window. The concept was developed with the then head of mission, Maureen Waddington. The window was installed on the 30th of October 2019. Almond Glassworks was founded by Bruce Hutton in 1994. He completed a Fine Arts Degree (Chisholm Institute of Technology) majoring in stained glass in 1988, he then went on to work in the industry both in Australia, England and South Africa. He completed a Postgraduate (Monash University) in 1996, focusing on the conservation and restoration techniques of stained glass. Detail of a nun in stained glass window at St John of God Hospital, Ballarat.stained glass, st john of god hospital, ballarat, nun, bruce hutton

This book contains information on historic French nails and fixings, being translations from the French Masters compared and contrasted to the Anglo-American tradition. It has been compiled by Chris How, a retired Civil/Structural Engineer who lives in Warrnambool, Victoria. He has been involved with conservation and heritage buildings for half a century and it was working with pioneer materials and techniques that first stimulated his interest in historic nails. He has completed a Master’s degree in England and made a special study of French and Germanic framing and its spread across Europe. This involved similar studies in Denmark, Belgium, the Baltic countries and Australia. This book is of interest because it was written by a local Warrnambool resident, one who has researched and studied many buildings in Warrnambool and district through an examination of the building materials used, especially the nails and fixings. This is a soft cover book of 126 pages The cover is grey with a grey, black and white sketch on the front cover and a colour photograph on the back page. The book has contents pages, a list of tables and figures, a list of the source of illustrations and credits, a foreword, acknowledgements, a preface, eight chapters, a glossary of terms and appendices. There are many black and white and colour illustrations. chris how, history of nails, history of warrnambool