A dead eye is a part of a vessel’s rig On board sailing ships, dead eyes were used in three different areas. Traditionally dead eyes are made of wood but they have different forms according to where they were used in the vessel rigging. The most common type of dead-eye is flat, with three holes and was used to tension the shrouds, the heavy lines which steadied the masts on each side. Each shroud had a dead eye at the lower end, which corresponded to a similar dead eye attached to the side of the ship. The two were connected with a rope called a lanyard, which was used to tighten the assembly. The stays, heavy lines running forward from the masts, were also tensioned with dead eyes. These are much larger and rectangular, with four or six holes. The third type of dead-eye was a two-holed version attached to an eye at the end of the parallel, which tied a yard to the mast. The loose ends of the parallel rope passed through the dead eye and then down to the deck, making it possible to tighten or slacken the parallel from the deck so that the yard could be more easily manoeuvred. It was especially important for the mizzen yard, which had to be shifted from one side of the mast to the other when tacking the ship.An item used on sailing ships rigging this item of ships equipment and its use has been used from the beginning of the invention of sailing ships going back to ancient times. Its use on sailing vessels had not changed in design or use until they went out of fashion and steamships took their place.Circular wooden ships rigging dead eye with three holes Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sailing vessel rigging, dead eye, sailing equipment

Camisole. Round neck,edged with cut work lace. V shaped panel below the neckline, made with alternating bands 2.5cm wide, of cut work and woven lace five on one side , four on the right hand side. Cotton high neck. Deep Vee lace front 5 buttons, metal, covered with fabric(one missing). Bodice gathered onto a waistband at front, three back panels join waistband at back. Hand stitched button holes.costume, female, underwear

A book titled ' From The Black Hole to Plassey: The Story of England's supremacy in Bengal. A record of that momentous epoch when the vast empire of India was won for England.' Published London: Ward, Lock & Co., Salisbury Square, E.C. New York: 10 Bond Street. 273 - 288 pgs. (ill.). This book is one of a series of ' 37 Ward & Lock Penny Books for the People.' ' Historical Series. Price one penny. Advertisements are of note.books, biography, india, lydia chancellor, collection, ward & lock's penny biographies, ward & lock's penny books for thepeople, historical series, history, england, english history, india, indian history, from the black hole to plassey, advertisements, book, books, the story of england's supremacy in bengal, book, books, penny books

Queen Victoria 60 years Medallion: Two Medallions issued by the borough of Eaglehawk for Queen Victoria's 60th year of Reign, 1837-1897. Has a picture of Queen Victoria on one side with inscription 'Queen Victoria's 60th Year of Reign 1837-1897' On the back it has the Eaglehawk crest with the motto 'Diet Etmon Droit' inscribed around the crest is Eagle * Hawk .C. Brown Mayor 1897. Both medallions have a small hole punched at the top. Box 625numismatics, medals - commemorative, eaglehawk mayor e.c. brown. queen victoria 60th year reign. eaglehawk crest. 1897

Cream coloured satin bodice with cotton lining. Deep V shape at waist front and back. Front opening has twelve cream coloured bowl shaped buttons with bound button holes. Two centimetre stand up collar.Front has two vertical darts on either side of opening - one on each side has plastic stiffening insert.Two inserts at back. One stiffening insert in RHS. Long sleeves have split on upper edge at hem. Sleeves have trim of gathered fabric attached above wrist. Black cotton stitches visible on both sleeve seams.costume, female, bodice

Collection of handwritten letters - Albert Bush's Stores. Approx 150 business letters addressed to ''My dear Alb'' signed ''Yours affectionately Fred'' from Bendigo, dated 1916 - 1919. Letters are generally on one side of a typed sheet printed by Albert Bush's Stores in 1916 relating accounts in relation to the probate re the late Albert Bush . Some single sheets inserted. Letters are bound with string through a single hole and tied.person, individual, bush collection - personal

One brass piano sconce with copper candle holder, back mounting plate with 4 screw holes & swivel.lighting, candle, piano

Pure wool, navy blue men’s cardigan. Five navy blue buttons. One bound pocket on each side front. A 10.5cm wide band of woven pattern on each side front. Fine knit of heavy density. Set in sleeves with a 2cms wide fine knit cuff. Machine stitched button holes. Overlocked seams.Sutex ® Quality Knitwear. Made in Australia. Size 18 to fit 100cm. PURE WOOLcostume, male, cardigan

Pure wool, fawn in colour, men’s cardigan. Five button, V neck front. One pocket on either side of front. Front band is 3.5cms wide and lined with cotton fabric, from the V opening to the hem to support buttons and button holes. Overlocked seams. A fine rib pattern, one cm wide is separated by a narrow one stitch gap. A finer rib, two stitches wide forms the cuffs, and lower band. Set-in sleeves.QUALITY KNITWEAR BY HANRO PURE WOOL 38costume, male, cardigan

Long sleeved pink silk bodice lined with pink and mauve cotton fabric. Front of bodice made of pieces with a centre seam. Centre panel insert of cream coloured embroidered net narrowing from 28 cms across high neckline to 18 cms at waist. Five black velvet bows are attached vertically at centre front from below the throat, 6 cms apart. Velvet bows hand stitched to centre front. Front panel has rounded shape dipping below the waist. On either side of front insert are two wide vertical tucks Stand up collar of embroidered net (6 cms) has two pieces of wire inserted at LHS of back opening and in front of LH shoulder. Matching wire pieces on RHS are missing. Wire pieces are hand stitched in place. The bodice has a back opening fastened with six buttons and button holes plus a hook and eye at the top below the collar. One button is missing. Buttons are white with wheel spoke pattern. Strip of hemmed silk fabric is tied to the top buttonhole. Cotton lining consists of four pieces across the back and two pieces across the front with centre seam and two darts on either side. Full gathered set in sleeves from the shoulder are gathered into a tightly fitted 20 cm lower sleeve just below the elbow. The upper sleeve has a fitted lining of mauve cotton fabric shaped to the elbow and then forming the fitted sleeve along the lower arm. The fitted lower sleeves are covered with cream coloured embroidered net and have a 10 cm opening on outer edge fastened with three buttons and button holes. Hand and machine stitched.costume, female daywear, silk bodice

Lightweight knee length linen coat with long sleeves. The coat is single breasted with a V neckline with a fold over collar of black linen fabric. There are two rows of black cotton piping on the edges of the collar. The front is made up of four pieces. The two centre panels are shaped at the bust line. The two side panels are narrow at the shoulders and flare slightly from the hip line to the hem line. There is a decorative line of stitching on the front seams. The front of the coat is fastened with three black buttons (2 cm) and button holes. The back of the coat is made up of three pieces. The centre panel is shaped in at the waistline. The two side panels are narrow at the shoulders and flare slightly from hip line to hemline. The two back seams each have three decorative black buttons (2 cm) vertically between bust line and waist. There is a decorative line of stitching on the back seams. The coat has long set in sleeves shaped at the elbow and with black linen cuffs (10 cm). There are two rows of black cotton piping on the top edge of each cuff and one row of black cotton piping on the lower edge of each cuff. There is a 14 cm cotton tape hanging tag stitched inside the coat just below the collar on the back. Machine stitched.costume, female daywear, linen coat

Black and white photograph : opening fancy dress ball, White Hills Reading Room. 8 young adults in sailor suits, 4 female, 4 male. Brick wall, windows and weatherboard wall at back. Female in centre hoilding small Union Jack flag. Figures have been numbered. Note hole in sole of shoe on right. On front pencil numbers 1 - 8 - one on each person. Names on back of photo correspond to numbers. 1. Arthur Caldwell 2. Mary Dixon ( Mrs. E.M. Bourke ) 3 Frank Dixon 4 Joy Bovard ( Ball ) 5 Imelde Flack 6 Lizzie Richards ( Gay Wood ? ) 7 Ernie Cawden 8. George Cailcottage, miners

For about 40 years the corner of Hargraves and Williamson Streets in Bendigo in rural Victoria had been known for its arresting aroma. From a hole in a window wafted the smell of Gillies Brothers' meat pies.The Gillies window, along with the nearby Shamrock Hotel, ANZ Bank and Post Office, was one of the delights of Bendigo and proof that mass-produced food can still be delicious. Gillies went from strength to strength, surviving listing on the second board and a handover to a younger generation of managers.Gillies had three factories, 10 shops in rural Victoria and Melbourne. Les Gillies, one of three brothers who founded the baking business after the difficult drought years preceding 1950, admits that the company has not always been run along the most modern business methods. Change began with the preparation of a business plan subsidised by the Victorian Department of Industry, Technology and Resources in 1974. Prepared by Cruickshanks, the plan formed the basis of the company's float on the second board. Capital expanded to $4.4 million. In 1988, a second plan was produced by Chris Mason and Associates covering business, marketing, computer utilisation and human resources. This factory for Gillies pies originally opened in the 1950s, but has sadly been closed and abandoned since about 2006.CD Gillies History Photos containig 11 photos of shops, staff and factories in Bendigo.bendigo, business, gillies bros, gillies pies

Two handwritten copies of the same document titled 'The Bendigo Goldfield, the City Built on Gold' Many amendments made to the text with pen. Extract: 'Bendigo the City Built on Gold, more than 22 million ounces of it. In only two years and three months, after gold was first found in the spring of 1851 at a spot called 'The Rocks' in Golden Square, over one million ounces oif gold had been won, nearly 662,000 oz of it in 1853. Thousands of diggers' holes and mounds scarred the surface from Golden Gully to White Hills; at Ironbark, Long, California and Sailor's Gullies, and through Eaglehawk to the Whipstick Forest'.bendigo, mining, the city built on gold

4 calendars. (a) 1903 tiled Vine Leaves'. It is a foldable calendar. It is in four sections with a blue strip down each side. Each section has 3 months and a verse printed on it. There is vine leaves and grapes. Each month is printed on a large leaf. (b) 1941 calendae with 'A Calendar of Happy Days' printed in gold on the front of the little calendar booklet. It is a mottled grey colour with a light greenish ribbon at the top. It has a coloured picture of the Crucifiction glued inside a gold line border. (c) 1950 calendar. Coloured garden scene with trees and colourful flowers, pathways and steps. An archway at the back. Picture glued to a heavy piece of card with a pale blue calendar booklet glued to the bottom with a piece of pale blue heavy paper. 'May each Day be a Happy One' printed in gold on the front of the booklet. (d) Pale blue1937 calendar booklet with 'Calendar' printed on the front in dark blue. The back is a piece of wood (3 ply) with hand painted blue & yellow flowers painted on it. A piece of pink cord is threaded in a hole at the top for hanging.ornaments, residential, malone collection, assorted calendars

Hand operated Bellows vacuum cleaner. Previously #27 The “Baby Daisy” Vacuum Cleaner is constructed from timber, steel and leather bellows. It has a carry handle fixed to the top. The base is approx. 500mm x 250mm. The height is approx 400mm. On one side is a bracket for a handle (missing) used to operate the bellows. The device is mounted on a foot plate that is split. On one side of the bellows is a circular metal detachable hatch, fixed by wing-nuts. This has a central hole for a tube (missing). Attached internally to this hatch is a cloth dust collection bag. The metal hatch has the following moulded words arranged in a circular fashion. 'DAISY Vacuum Cleaner). There are two brass plates fixed to the side of the cleaner above the hatch. These plates are stamped with 'Rd. No. 518080 and Rd. No. 530353' Gold printed Labels on the side say the following. BABY DAISER Vacuum Cleaner. Registered England. No. 518080/7 No. 530353/08 Trade Mark No.294851 /07 Designs France No. 25469/08 Germany No. 330219 / 08 Further Patents applied for. In the centre of the label is a picture of a Daisy Flower. With the words Iles Patent. This is surrounded by a ribbon with the words. 'The Daisy Registered Trade Mark'. On one side near the base of the cleaner the number '7749' is stamped into the metal.fBaby Daisydomestic equipment, cleaning, vacuum cleaner

Anne Bronsdon collection neckerchief -one of two which were the property of Anne Bronsdon's grandfather Jan du Marchie Sarvaas who died at Emu Creek in 1877. Red silk neckerchief with red ,gold and purple borders .Some stains and holescostume accessories, clothes accessories

A cream coloured booklet with two eyelet holes on the left hand side. At the top of the booklet reads 9-14 (hand written) Under this reads DSN 7610-66-093-7741. At the bottom of the booklet in green ink reads FD Hospaustralia - armed forces - service manuals, fire support, 1 fd hosp

A gray coloured cover with black writing on it. The identification code is 7610-66-107-1143 and is in the top right hand side of the booklet. There are two punch holes on the left hand side of the booklet. The booklet is covered with a clear plastic coveraustralia - armed forces - service manuals, land warfare

Elongated loop of metal, the loops made of wide, but thin metal, notched on one side, presumably to hold an auger; and holes to secure piercing metal posts at ether end, only one of which remains.

8431.1 - A metal hook which has one end curved around a moderately large single metal chain link, which is itself secured by an encircling metal band to a metal strip, at either end of which by means of holes long metal bolts with screw-threaded tips, screwed onto which are square metal nuts, protrude.

Part of the collection of Dr Frank Forster. The philosophy of this object was to keep the uterus dilated. It was commonly believed at this time that the cervix was the cause of dysmenorrhoea. The stem pessary was an object used to rectify uterine displacements - either anteversion or retroversion. The device consisted of a stem which is introduced into the uterus, the stem was then attached to an ovoid flange or ball, on which the cervix uteri then rested. Connected to this flange was an external part or wire frame, which in turn was attached at one extremity to a flat tubular portion, passing into the vagina. This was then fixed to the intrauterine portion. The wire frame was then made to press on to the pubis, so that the pessary could be kept in position in utero.Pessary, Duke's stem design. Metal pessary with hollow stem, and a rounded flange at one end. The flange has eight small holes surrounding the central hole. The stem is flexible and is made from coiled metal which has then been attached (perhaps by soldering) to the flange.pessary, intrauterine device

Part of the collection of Dr Frank Forster. The philosophy of this object was to keep the uterus dilated. It was commonly believed at this time that the cervix was the cause of dysmenorrhoea. The stem pessary was an object used to rectify uterine displacements - either anteversion or retroversion. The device consisted of a stem which is introduced into the uterus, the stem was then attached to an ovoid flange or ball, on which the cervix uteri then rested. Connected to this flange was an external part or wire frame, which in turn was attached at one extremity to a flat tubular portion, passing into the vagina. This was then fixed to the intrauterine portion. The wire frame was then made to press on to the pubis, so that the pessary could be kept in position in utero.Pessary, Duke's stem design. Metal pessary with hollow stem, and a rounded flange at one end. The flange has six small holes surrounding the central hole. The stem is flexible and is made from coiled metal which has then been attached (perhaps by soldering) to the flange.pessary, intrauterine device

This pessary belonged to Dr Olga Bolitho who inherited it from Dame Ella MacKnight. Used by Olga Bolitho once or twice, according to correspondence dated 14/5/00 from Olga Bolitho [held with the donation form] Dame Ella Macknight was an obstetrician and gynaecologist who worked at the Queen Victoria Hospital, Melbourne. She was appointed as a Dame Commander of the Order of the British Empire on 1 January 1969 for services to medicine. She gained her MB BS in 1928 from the University of Melbourne. After qualifying as an obstetrician and gynaecologist, (MD, Melb.1931, DGO Melb 1936), she was associated with the Queen Victoria Hospital from 1935-1977. Her appointments included honorary obstetrician and gynaecologist from 1935-1964; vice-president of the Committee of Management for 1963-1971 and president from 1971-1977. She was president of the Council of the Royal College of Gynaecologists from 1970-1972.After her death in 1996, her family set up a post graduate scholarship in her honour with the Royal College of Gynaecologists & Obstetricians.Clear plastic pessary. Pessary is circular, with a wide flange and a short stem. The stem is attached to the flange, rather than the pessary being moulded as one piece. There are two small holes in the flange, either side of the stem.intrauterine device, pessary

This Dunstable Kestrel glider (which originally was finished in silver paint) was built in 1939 by Ric New and members of the Lake Pinjar Soaring Club. It first flew on 26 December 1939 at Lake Pinjar. The first extensive flight was on 7 January 1940 when Ric New managed to stay aloft for 30 minutes and reach a height of 3000 metres. Unfortunately the Kestrel was badly damaged the same day when another club member Jim Brabazon stalled and spun in. The Kestrel was repaired by June 1940 and flown extensively at Lake Pinjar in 1940 and 1941 until Government authorities intervened and ploughed up Lake Pinjar as a wartime measure to prevent it being used as a landing field by the enemy [Allan Ash, Gliding in Australia, pp 92 – 94]. The Lake Pinjar Soaring club was reformed as the Perth Gliding Club after the end of the war and was joined by Ric New with his Kestrel [Allan Ash, Gliding in Australia, p 103]. The glider was held in storage at the Gliding Club of Western Australia prior to transfer to the Australia Gliding Museum. The Deed of Gift indicates that it was formerly owned by Wally Williams, also from Western Australia. The aircraft is in poor condition and has some non-original elements. It is one of three that currently exist. Nevertheless it is considered to be an important exhibit for relating the history of gliding in Western Australia.Aircraft of wood structure skinned with plywood and fabric – off-white colour scheme – crazed flaking paint on fuselage – nose of fuselage has been modified by addition of streamlining – damage includes impact holes to plywood, especially on starboard side – wings have been stripped of fabric covering and some ribs are missing – tailplane and rudder are in reasonable condition although, like wings, have been stripped of fabric. Overall, while the main elements of this aircraft are present, there are a number of missing fittings and will require extensive works to restore to a static display standard.australian gliding, glider, sailplane, dunstable, kestrel, bill manuel, ric new, lake pinjar soaring club, lake pinjar, gliding club of western australia

History of object is unknown. Member's name is not recorded on the ticket.Ticket dates from the club's first premiership year:1891. Club subsequently won another three consecutive premierships, becoming still the only VFA club to do so. Ticket is one of a run of tickets from 1880 to 2012 (complete except for 1915 and 1916 when the club withdrew from competition and 1899 and 1900 which are missing from the set).Rectangular card covered in black leather with fold in middle and small punched hole lined with metal intop right corner. Card has gold embossed border and two diagonal lines running top left to bottom right filled with red with 'ESSENDON' in capital letters. Date '1891' embossed in gold in top right and 'F.C'. embossed in gold on bottom left. Some wear on right hand edge. Reverse of card is the same as the front. Inside reads: Essendon Football Club/ SEASON 1891/MEMBER'S TICKET/. Numbers: 769 is printed in large type to the left of SEASON 1891. Left side is printed with names of club administrators and righ side is printed with words: FIRST TWENTY and SECOND TWENTY.essendon football club, 1891, premiership, ticket, vfa, victorian football association

Clothing. Infant's cream silk dress. High round neckline edged with one cm lace, and casing. Yoke front and back extending to kimono style long sleeves. Front yoke has four vertical strips of lace and centre embroidered panel with pale pink flowers and pale green leaves. Two strips of inserted lace extend along the top of each sleeve from neckline to wrist. Sleeves edged with three cm lace at hem. Centre back opening (22 cm) fastened at neckline with.6 cm pink silk ribbon and two one cm buttons and button holes in centre and lower edge of yoke. Skirt has five cm lace border at hem.costume, children's, infant's cream silk dress

Clothing. Infant's cream silk dress with bodice front and back. Casing at waist with .5 cm cotton ribbon insert. High round neckline with 1.5 cm lace trim and casing with cotton ribbon insert. Bodice at front has embroidered circle and leaf pattern. Centre back opening (28 cm) fastned ribbon ties at neck and waist and 1 X one cm button and button hole between. Straight long sleeves edged with 1.5 cm lace at wrist. Skirt is edged with 3 cm scalloped lace at hemline with two horizontal rows cutwork stitching.costume, children's, infant's cream silk dress

Clothing. Infant's cream silk christening gown. High round neckline edged with gathered .7 cm lace. Yoke front (7cm) and back (8cm) of lace pieces and pin tucks. Skirt has 37 cm border of horizontal pin tucks, embroidered sections, piping and hemmed with scalloped embroidered lace.Centre back opening (21 cm) fastened at neck and lower edge of yoke with one cm pearl look buttons. No button holes. Long sleeves gathered at shoulders and gathered into 3 cm band of lace at wrist with gathered lace frill at hem. Three pin tucks around sleeves at elbow.costume, children's, infant's cream silk christening gown