An example of the innovative winged keel design based on the Australia 2 yacht (Americas Cup winner 1982). The Star Fin was a collaboration between Australian pro surfer, Cheyne Horan, and Australia 2 fin designer Ben Lexcen. Horan won 1984 Bells Beach surfing festival riding a board using this fin design. This fin design represents a radical departure from surfboard design thinking at that time (early 1980s) Most people were concentrating on multi fin designs Mark Richards with high performance twin fin designs, then Simon Anderson's 3 fin 'Thruster' design. Cheyne Horan employed the talents of innovative yachting designer Ben Lexcen (who designed the Americas Cup winning Australia 2) to design a unique Star Fin which would provide greater hold for a single fin at critical angles. Horan proved the effectiveness of this design by winning the 1984 Rip Curl Pro at Bells beach using a board mounted with one of the Star Fins. The Star fin represents an unusual (for surfing)scientific and innovative design approach. This is a rare and representative item signed by design instigator Cheyne Horan.Cheyne Horan Star Fin. Moulded polycarbonate red Star Fin. Fin is signed by Cheyne Horan with "HAVE A GOOD SURF FROM Cheyne Horan". Manufacturers and makers information embossed on base. Concept by Cheyne Horan Design by Ben Lexcen Patent Pending STAR FIN Made from Lexan Polycarbonate by Star Fin p/l PO Box 1293 Nth Syd Aust.red, star fin, cheyne horan, ben lexcen, winged keel, bells beach surf contest 1984

Document. The Owen Williams collection. Fidler & Ayres (London), Glaziers' Lead, Vice, and Mould Manufacturers, dated August 1920, for Messrs. Owen Williams & Co.bendigo, industry, owen williams & co.

This is a soft mud sand-stock moulded or semi-dry pressed brick bearing the 5 Olympic rings with the words "GLEN 1956 IRIS" across the bottom.5 Olympic Rings "GLEN 1956 IRIS"olympics 1956, glen iris brick works

Australian manufactured black leather ammo boots to the British pattern used by the Australian armed forces.Used by Australain armed forcesAnkle high, black stiched leather ammo boots with nylon laces on 12 eyelets, internal leather tongue and moulded synthetic soles. Size 10G.Made in Australia 10*G 1987boots, footwear

This bottle holds one imperial pint. The manufacturer John Sutherland & Sons began production in Melbourne in 1885 and ended production in the 1970s. This bottle was made with a 3 piece mould. 2 pieces for the bottle proper and a third for the base. The side mould seams extend right through the lip, so this was not applied separately. The type of A G M mark on the bottom indicates it was made during the 1929 to 1933 period. It displays some stretching in the glass on the neck as it was taken from the moulds whilst still somewhat plastic, not having cooled enough. Overall the bottle in excellent condition.Clear glass bottle, embossed inscription, AGM mark on base.Embossed inscription: "John Sutherland & Sons Pty Ltd Melbourne Pickles"glass bottles, john sutherland & sons, pickle bottles

Candle stick manufacturing moulds were extensively used throughout the Kiewa Valley and its regions to provide rural homes and businesses with illumination during times of limited light e.g. night time. These candles were used before the Kiewa Valley was placed of the electrical grid. The candles were made from parrafin wax. Before the 1920"s electricity was in limited supply due to the inability of the private electricity suppliers to service isolated rural regions. It was not until the Victorian State Government passed legislation (1920) to improve electricity supplies by forming the State Electricity Commission of Victoria (S.E.C.V.) Isolated rural communities could not meet the higher costs to have electricity supplies connected and therefore it was not until the 1950's that adequate domestic electrical power could be supplied.The isolation that the Kiewa Valley provided was of a greater hindrance to any utility (power,roads & telephone) where the cost per instillation was beyond the rural population's ability to pay either directly or indirectly. One of the benefits that the "closed" community of Mount Beauty had, when it was administered by the SECV was that some utility costs were a lot lower than that of the other settlements in the Kiewa Valley. This disparity led to a conference in 1928 of the rural and regional councils to demand from the Government an equality of electricity tariffs. This equality did not take place until 1965. The demand and usage of cheaper and affordable lighting that wax candles provided was for some rural families a way of life until the mid 1900's.This candle making mould is made from mild rolled sheet steel(tin). The top basin is rectangular in shape with beveled edges(facing in on all sides. There are six holes in the top basin for vertical hollow tubes to feed off. The six tapered cyclindrical tubes running from the top basin to the bottom raised platform base. All connections are welded together. The bottom of each cylinder has an opening for the candle wick. The wick is positioned in place before the molten wax is poured into the cylinders. A positioning ring has been welded to one bottom ring for stability.parrafin wax, candles, domestic household ighting

This bottle is known as a marble stopper bottle. The bottle was filled upside down so that as soon as the filling stopped the stopper was forced down to seal the bottle against the rubber ring. Pressure inside the bottle would keep the marble pressed against the top of the bottle. To open the bottle the marble was pressed down where it would fall into the neck chamber below. The marble would stay inside the chamber when the bottle was tilted up for drinking. This bottle came from the aerated waters factory of John Fletcher. This factory was commenced in the mid 19th century by John Davis. As a young boy John Fletcher worked at the cordial factory of John Rowley in Banyan Street, Warrnambool and then worked for John Davis at his Union Cordial Factory for many years. In 1885 he succeeded John Davis in this business. Fletcher’s business continued until 1930 and it later was bought by Ralph Reeves. John Fletcher manufactured aerated waters, soda, tonic waters, lemonade, ginger ale, hop beer, hop bitters, sarsaparilla and cordials. This bottle is of interest, firstly because it is a good example of the marble stopper type of bottle, no longer in use. It is also important because it is a John Fletcher bottle and he was a prominent soft drinks manufacturer in Warrnambool for over 40 years. This is a green-coloured glass bottle with a round base. The top of the body of the bottle has two heavy indentations either side, narrowing the entry to the body of the bottle. The neck is short and thick and the opening at the top of the bottle is moulded with a rubber ring around the inside. A glass marble is loose inside the bottle neck. The name of the manufacturer is moulded into the glass on the side and includes a crown symbol used as a trade mark.‘John Fletcher Trade Mark Warrnambool’ john fletcher, warrnambool, cordial manufacturers in warrnambool

Moulded glass drinking vessel with vitreous enamel lid mounted on silver base with lifting mechanism. Lifting lever decorated with fleur de lis. Painting on lid depicts a pastoral scene with a seated male next to standing female with a staff, a dog lying next to the man, and sheep in background. 8 cut planes of glass around 2/3rds of glass circumference, and a rounded, moulded handle.'Schalerin, Schalerin, fri auf der hut!'domestic items, food and drink consumption, drinking, vessel, enamel, picture

These two items have been linked together as a decorative pair but it is not clear why, as the sphere or bulb does not have an opening and cannot hold a light and there is nothing very attractive about the two items as they appear today. The stand may have been set in front of a coloured light to ensure reflection or the sphere may have been decorated in some way.These items are kept as ornamental curiosities.This is a clear glass sphere on a metal stand. The stand is painted light brown and has a fretwork decorative base, a moulded stem and an open top with a curved pattern edge.vintage ornaments, glass ornaments

This bottle came from the general store of Russell and Powell of Fairy Street Warrnambool. This store sold an extensive range of imported wines and spirits as well as tea, clothing materials and hardware. Samuel Giffen Russell, born in Belfast, Ireland, established his store in Warrnambool in 1878 and took Joseph Powell as a partner in 1881. The business premises in Fairy Street were built in 1882. Giffen Russell was Mayor of Warrnambool from 1898 to 1900. By the early 1900s the firm had a store in Bank Street, Port Fairy and was known as Giffen Russell and Company and the business continued under that name until the late 1940s, the proprietor at that time being Harry Lynch. The Lynch family carried on this business until the second decade of the 21st century. This stoneware bottle is of some importance as it is one of the few items we have that came from the long-established Warrnambool general store of S.Giffen Russell.This is a stone bottle in cream and brown tonings. It has a circular base and body with a short neck and a moulded top opening. There is a screw top. The inscription on the bottle is in black print.‘Russell & Powell Warrnambool and Port Fairy’ russell & powell, warrnambool, giffen russell & co., warrnambool

The Express 11, was built in 1990, and is still in service as the Trimness. A self discharging bulk carrier she was built by Tsuneishi Zosen K. K. Numkauma for Howard Smith Industries Pty. Ltd. Length 150m Beam 24m Gross tons 17,309 speed 13 knots. Sold in 1996 to Trimnes Shipping, of Panama Sold 1996 to Trimnes Shipping Co, Panama and renamed Trimnes.Ship builder's model - Body of moulded polyurethane painted in maroon and black, the deck painted grey, with detailed fittings, machinery, rigging and superstructure, raised on a wooden base.on model: "EXPRESS/ EXPRESS HOBART" on base: PWO 2666.1/ 110/97 SI

Displayed at History House.Print of map pasted onto board, mounted and framed under glass. Buff-coloured mount. Mahogany stained moulded wood frame, black inner frame.Front: Plan of the Agricultural Area of Drik-Drik L.2556/Prepared by the Board of Lands and Works in accordance with the "Amending Land Act 1865". Lands and Survey Office, Melbourne 11th May 1865. (printed, upper centre). Back: Duncan Hedditchmap, drik drik, plan, geography, cartography

A cap liner is an item that helps to seal the contents in a container to avoid spoiling the contents. This cap liner was recovered from the Falls of Halladale shipwreck. The Falls of Halladale was an iron-hulled, four-masted barque, used as a bulk carrier of general cargo. She left New York in August 1908 bound for Melbourne and Sydney. In her hold was general cargo consisting of roofing tiles, barbed wire, stoves, oil, and benzene as well as many other manufactured items. After three months at sea and close to her destination, a navigational error caused the Falls of Halladale to be wrecked on a reef off the Peterborough headland on the 15th of November, 1908. The captain and 29 crew members survived, but her cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. The Court of Marine Inquiry in Melbourne ruled that the foundering of the ship was entirely due to Captain David Wood Thomson's navigational error, not too technical failure of the Clyde-built ship. The Falls of Halladale was built in1886 by Russell & Co., at Greenock shipyards on the River Clyde, Scotland for Wright, Breakenridge & Co of Glasgow. She was one of several designs of the Falls Line of ships named after waterfalls in Scotland. The company had been founded between 1870- 1873 as a partnership between Joseph Russell, Anderson Rodger, and William Todd Lithgow. During the period 1882-92 Russell & Co. standardised designs, which sped up their building process so much that they were able to build 271 ships during that time. The Falls of Halladale had a sturdy construction built to carry maximum cargo and was able to maintain full sail in heavy gales, one of the last of the 'windjammers' that sailed the Trade Route. She and her sister ship, the Falls of Garry, were the first ships in the world to include fore and aft lifting bridges. Previous to this, heavily loaded vessels could have heavy seas break along the full length of the deck, causing serious injury or even death to those on deck. The new raised catwalk-type decking allowed the crew to move above the deck in stormy conditions. The Falls of Halladale shipwreck is listed on the Victorian Heritage Register (No. S255). She was one of the last ships to sail the Trade Routes. She is one of the first vessels to have fore and aft lifting bridges. She is an example of the remains of an International Cargo Ship and also represents aspects of Victoria’s shipping industry. The wreck is protected as a Historic Shipwreck under the Commonwealth Historic Shipwrecks Act (1976).Glass cap liner, green opaque moulded disc with indented ring and two pontil marks. Inscription on the top (undecipherable). Recovered from Falls of Halladale wreck. Embossed inscription (indecipherable)flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, cap liner, falls of halladale, russell & co., glass liner, glass seal

The Falls of Halladale was an iron-hulled, four-masted barque, used as a bulk carrier of general cargo. She left New York in August 1908 bound for Melbourne and Sydney. In her hold was general cargo consisting of roofing tiles, barb wire, stoves, oil, and benzene as well as many other manufactured items. After three months at sea and close to her destination, a navigational error caused the Falls of Halladale to be wrecked on a reef off the Peterborough headland on the 15th of November, 1908. The captain and 29 crew members survived, but her cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. The Court of Marine Inquiry in Melbourne ruled that the foundering of the ship was entirely due to Captain David Wood Thomson's navigational error, not too technical failure of the Clyde-built ship. The Falls of Halladale was built in1886 by Russell & Co., at Greenock shipyards on the River Clyde, Scotland for Wright, Breckenridge & Co of Glasgow. She was one of several designs of Falls Line of ships named after waterfalls in Scotland. The company had been founded between 1870- 1873 as a partnership between Joseph Russell, Anderson Rodger, and William Todd Lithgow. During the period 1882-92 Russell & Co. standardised designs, which sped up their building process so much that they were able to build 271 ships during that time. The Falls of Halladale had a sturdy construction built to carry maximum cargo and able to maintain full sail in heavy gales, one of the last of the 'windjammers' that sailed the Trade Route. She and her sister ship, the Falls of Garry, were the first ships in the world to include fore and aft lifting bridges. Previous to this, heavily loaded vessels could have heavy seas break along the full length of the deck, causing serious injury or even death to those on deck. The new, raised catwalk-type decking allowed the crew to move above the deck in stormy conditions. The Falls of Halladale shipwreck is listed on the Victorian Heritage (No. S255). She was one of the last ships to sail the Trade Routes from Europe and the Americas. Also of significance is that the vessel was one of the first ships to have fore and aft lifting bridges as a significant safety feature still in use on modern vessels today. The subject model is an example of an International Cargo Ship used during the 19th and early 20th centuries to transport goods around the world and representing aspects of Victoria’s shipping industry. Small drinking glass, rebated around lip with encrustation and a small chip out of the lip. Inscriptions on attached sticker. The handmade glass has been blown into a mould.""F/15" "SS 3/2-74"flagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, falls of halladale, glass, russell & co., wreck, artifact, shot glass, handmade, blown glass, shipwreck artefact

Green Glass Bottle. The words ''WHITTAKER BROS.'' ''MAYBOROUGH'' and ''DUNOLLY'' are moulded into the bottle vertically. The bottle is showing fluorescence. Diameter 6cm x Height 22 cm.''WHITTAKER BROS.'' ''MARYBOROUGH'' ''DUNNOLLY''food technology, bottling, softdrink bottle?

Small size.Clear plastic pessary consisting of three sections moulded together including a phlange with elevated ring, stem and bulb. A hole extends right through the centre of the device.intrauterine device, pessary

Produced as a souvenir from the ballast of two Japanese Midget submarines sunk during attacks on Sydney Harbour in WWII. This souvenir was produced to raise funds for the RAN relief fund and King George's Fund For Sailors. It was sold as a souvenir as part of a touring exhibition around the country accompanying a composite midget submarine constructed of the two sunken vessels raised from Sydney Harbour.The souvenir submarine has tangible connections to the Japanese Midget Submarines sunk during attacks on Sydney Harbour in 1942. It is historically significant for its links to defending Australia and for its connections to tourism and fund raising relating to war time efforts.A small lead model submarine made from a 2 piece mould produced from the ballast of two submarines sunk during attacks on Sydney Harbour in 1942."Made from Ballast Jap Midget Sub" "Sunk in Sydney Harbour May 31 1942"wwii, imperial japanese navy, sydney harbour attack, midget submarine, souvenirs wwii, ran relief fund, king george's fund for sailors

Death of Joe Swift, Mitcham's noted bronze founder whose last job was making the plaque mould for the 75th anniversary of Burnley College of Horticulture, 1891 - 1966.Death of Joe Swift, Mitcham's noted bronze founder whose last job was making the plaque mould for the 75th anniversary of Burnley College of Horticulture, 1891 - 1966.foundries, swift, joe, burnley college of horticulture