This rug was woven at the Geelong Wool Museum in an elephant print pattern developed in the 1920s. Part of a working exhibit, it was created on a Jacquard loom manufactured in Kidderminster, UK in 1910s, and assembled in Australia. From the pamphlet: This rug was designed by Brinton's Carpets, a company that produced carpets in Geelong until 2008. The design was produced exclusively for the National Wool Museum, and came from an earlier design housed in Brinton's UK Persian Rug Archive and was recoloured for the Australian market. This Rug was produced on a 1910-built Axminster Jacquard Carpet Loom, donated to the Museum by Brintons. It forms the centrepiece of the National Wool Museum, where visitors daily experience this extraordinary machine in operation. Using Jacquard technology which is over 200 years old, individual coloured yarns of 80% wool and 20% nylon blend are used to produce high quality and long lasting durability.'Manor House' Hall runner. Elephant print pattern.amess house, churchill island, geelong wool museum, hall runner, joseph jacquard

DCPU is a five colour camouflage pattern developed by the Australian Defence Force and tested during Auscamthe late 1970s. DCPU has been replaced in the Australian Army by Australian Multicam Camouflage Uniform (AMCU) Long sleeved Shirt with two pockets, epaulets on both shoulders, tightening tabs on cuffs. Material is Disruptive Pattern Camouflage Uniform (DCPU) nicknamed Auscam or Jelly Bean Camo. auscam cammo, shirt, uniform, australian armed forces

DCPU is a five colour camouflage pattern developed by the Australian Defence Force and tested during Auscamthe late 1970s. DCPU has been replaced in the Australian Army by Australian Multicam Camouflage Uniform (AMCU) Long sleeved Shirt with two pockets, epaulets on both shoulders, tightening tabs on cuffs. Material is Disruptive Pattern Camouflage Uniform (DCPU) nicknamed Auscam or Jelly Bean Camo. shirt, australian armed forces, auscam cammo, uniform

This item would have been used as a salt container and would have been part of a dinner set. This would have been used for special occasions . It is in good condition and is a good example of this type salt storage jar. As this has a brown willow pattern instead of the usual blue it makes this make this salt despenser rare item.This has social and historical significance as it shows what items families used for special dinner occasions. It is the only one our collection and therefore will have good interpretation value for exhibitions . Small Ceramic jar with brown willow Chinese pattern. Copper hinged lid with recess for spoon. The spoon is required to dispense the mustard.ceramic, copper, chinese, table items, kitchen, domestic, mustard, willow pattern

This book was owned by the late Dr Elizabeth Kerr and was donated to the Museum by the executor of her estate, Margaret Cameron. It was produced for Cleckheaton wool and contains knitting patterns for a jumper and a jacket.Knitting pattern book, 4pp. Cover printed in colour with an oval photo of a man and a woman wearing a chunky, textured knitted jumper in beige (her) and a shawl necked brown jacket with a belt tie (him).No. 106 / Cleckheaton / COUNTRY SPUNknitting handicrafts - history, cleckheaton, knitting, handicrafts - history

Small wooden roller for making patterns on butter or shortbread pastry, dated 1827 & with initials IY, accompanied by a newspaper clipping reporting the history of the object. Made by Mr.Y.J.Young of Durham, England for his wife & inherited by his Granddaughter Miss Robshaw of Don Street, Bendigo.domestic equipment, food preparation, kitchen

Red covered pattern book of needlework designs from Briggs of Manchester. Over 130 pages with inserts and advertising specific products in the Briggs range.non-fiction

Needlework Illustrated is issue 196 and cost 1/-. it was published quarterly. Australian Home Journal is the May 1963 issue. Women’s magazines just after WWII played a “reflecting role,” including topics of readers’ interests as well as containing news items. Women’s employment rate had grown during WWII. However, even though the number of women working outside the home grew rapidly most of them were still engaged entirely in homemaking. Therefore women’s magazines centered mostly home crafts. Articles as well as advertisements presented information on keeping the family healthy with guidelines for thrifty shopping and advice on how to look good through it all. Patterns and instructions were provided for women to create home articles and clothing. The main sources for kntting and needlework designs available to women were in journals, magazines and pattern books. Embroidery was an affordable way to personalise and add aesthetic value to domestic linen and examples of embroidered and crocheted pieces could be found in most Australian homes. These are examples of women's magazines. They give practical advice on needlework / knitting and evidences the widespread interest in contemporary fashion. In doing so it shows what were the fashionable, but broadly affordable, women's and children's clothing styles of their day. These magazines also reflect women's interests --------------------------------------------------------------------------------------------------------------------------------------------------------- Two magazines. 3097.1 contains patterns, instructions, advertisements and photographs. It has a coloured cover - a pink background, black print an drawings of a woman wearing a top embroidered with roses and examples of needlework. 3097.2 contains patterns, advertisements, correspondence, and stories. It has a coloured cover with a photograph of a woman wearing a knitted jumper and three sewing patterns.magazine- needlework-illustrated magazine-australian-home-journal

Metal Spoon curve at edges making pointed at end

Imported, used in manufacture and sold by Holden and Frost Ca 1900Nickle plated steel ring as used in bridal makingequine agriculture, military, civilian c1900

DCPU is a five colour camouflage pattern developed by the Australian Defence Force and tested during Auscamthe late 1970s. DCPU has been replaced in the Australian Army by Australian Multicam Camouflage Uniform (AMCU) Soft round 'giggle' hat with 6 cm stitched brim. Fabric loops for inserting Camouflage materials. Fabric is Disruptive Pattern Camouflage Uniform (DCPU) nicknamed Auscam or Jelly Bean Camo. JOHN STAR P/L NSW 02 9669 1066 SIZE: 60CM 100% COTTONauscam cammo, uniform, australian armed forces

At the time when this shortbread / butter stamp block was used, rural dairies and larger properties who manufactured their own butter used butter stamps blocks for identifying the source of the butter or for decoration.. The patterns stamped into the warmed butter provided for a range of decorative visual enhancement to the "plain" and "boring" straight leveled normal butter surface. Although the wooden surfaces could be hard to keep clean commercial usage would have been limited and eventually replaced by a non porous and hygienically cleaner material. Greater hygiene controls where introduced. from the late 1940s on. These controls were the result of high infectious illnesses due to contaminated milk and dairy handling methods.This shortbread / butter stamp was used by a Kiewa Valley dairy and it presents what the domestic butter beautification processes were available during the mid to latter 1900s was. Their was a pride by rural properties in their produce and its by-products.This shortbread / butter stamp is made from wood, round and fashioned from a flat bed to a dome top. The top has a round moulded hole with screw indentations for fastening a pressure pole. The pattern on the face of the stamp is of an eleven petalled flower pattern around a small circular flower head. Both the head and petals have indentations which are will produce raised points in the pressed butter. Enclosing the flower pattern is a pattern which when pressed against the butter would produce small ridges radiating outward.On the dome stamped in black ink "T. & W. Davies"butter stamp, domestic butter blocks, domestic food preparations., shortbread, stamp, dairy, butter

Before factory production became commonplace in medicine, dispensing was considered an art and pill machines such as these were a vital component of any chemist’s collection. This machine dates back to the days when your local chemist or apothecary bought, sold, and manufactured all his own drugs and medicines to everybody who lived within the local community. In Victorian times, there was no such thing as off-the-shelf medicine. Every tablet, pill, suppository, ointment, potion, lotion, tincture and syrup to treat anything from a sore throat to fever, headaches or constipation, was made laboriously by hand, by the chemist. Pill machines such as these first appeared in the mid-1700s and quickly became a staple of the Victorian chemist’s shop. A ‘pill mass’ of medicinal powders mixed with a binding agent would be hand-rolled into a pipe on the tile at the back of the machine. This would then be placed across the grooved brass plate and cut into equal-sized pills using the corresponding side of the roller. Once all the necessary ingredients for the pills had been measured and ground with a pestle and mortar a final ingredient was poured in, syrup – this acted as a binding-agent. You could then roll it into a sausage shape. The largest part of the machine is the board. This is set at an angle and is comprised of the rolling surface, the cutting grooves, and the collection-tray. The large flat surface is for rolling out the pill-paste into the sausage shape. This is then rolled towards the brass cutting-grooves. The paddle (the second piece) is flipped over so that the grooves there line up with the grooves on the board. Rollers on the ends of the paddle roll against the brass edges of the board, and they guide the paddle straight across the grooves, taking the pill-mass with it. The grooves on the paddle and the board slice up the pill-mass and, after rolling the thing back and forth a couple of times like a rolling-pin, the circular pills roll off the grooves and into the tray at the bottom. https://galwaycitymuseum.ie/blog/collections-spotlight-victorian-pill-making-machine/?locale=en The collection of medical instruments and other equipment in the Port Medical Office is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Pill making device including a grooved base board and grooved sliding board with two pill moulds.None.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, pills, pill maker, medicine, health

Used as tBefore factory production became commonplace in medicine, dispensing was considered an art and pill machines such as these were a vital component of any chemist’s collection. This machine dates back to the days when your local chemist or apothecary bought, sold, and manufactured all his own drugs and medicines to everybody who lived within the local community. In Victorian times, there was no such thing as off-the-shelf medicine. Every tablet, pill, suppository, ointment, potion, lotion, tincture and syrup to treat anything from a sore throat to fever, headaches or constipation, was made laboriously by hand, by the chemist. Pill machines such as these first appeared in the mid-1700s and quickly became a staple of the Victorian chemist’s shop. A ‘pill mass’ of medicinal powders mixed with a binding agent would be hand-rolled into a pipe on the tile at the back of the machine. This would then be placed across the grooved brass plate and cut into equal-sized pills using the corresponding side of the roller. Once all the necessary ingredients for the pills had been measured and ground with a pestle and mortar a final ingredient was poured in, syrup – this acted as a binding-agent. You could then roll it into a sausage shape. The largest part of the machine is the board. This is set at an angle and is comprised of the rolling surface, the cutting grooves, and the collection-tray. The large flat surface is for rolling out the pill-paste into the sausage shape. This is then rolled towards the brass cutting-grooves. The paddle (the second piece) is flipped over so that the grooves there line up with the grooves on the board. Rollers on the ends of the paddle roll against the brass edges of the board, and they guide the paddle straight across the grooves, taking the pill-mass with it. The grooves on the paddle and the board slice up the pill-mass and, after rolling the thing back and forth a couple of times like a rolling-pin, the circular pills roll off the grooves and into the tray at the bottom. https://galwaycitymuseum.ie/blog/collections-spotlight-victorian-pill-making-machine/?locale=enhe companion item to pill-maker base, item 488.2The collection of medical instruments and other equipment in the Port Medical Office is culturally significant, being an historical example of medicine from late 19th to mid-20th century.Pill making device including a grooved base board and grooved sliding board with two pill mouldsNone.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, pill making, pill mould, medicine, health

This photograph is taken outside the Royal District Nursing Service (RDNS) Rosebud Centre which was opened in the mid 1970s. This photograph is a record of Rosebud RDNS staff in the 1980s. The Sisters are wearing their summer uniforms, some with white frocks with a blue pattern and a red belt, others with a white blouse with a red pattern on it and a royal blue skirt. The Health Aides uniform is a royal blue dress with white piping.Gradually over the years, Melbourne District Nursing Service (MDNS), later known as Royal District Nursing Service (RDNS), from 1966 when they received Royal patronage, opened Centres throughout the Melbourne Metropolitan area. Their Trained nurses (Sisters) left from these Centres each morning to carry out their nursing visits in a specific area,(district) taking any sterilized equipment needed with them. They returned at the end of the day to write up their patients nursing histories, clean and reset any equipment used ready for sterilization, and contact other medical and community personal as necessary. Most of the RDNS cars were housed at each Centre, only a few being driven home by a Sister. In 1980, a Home Health Aide ‘Pilot study’, funded by the Federal Government, the Brotherhood of St. Laurence and RDNS, with the program written and taught by RDNS Principal Nurse Educator. Pat (Paddy) Rowley was evaluated as successful. Following this Pilot study, Home Health Aides were employed by RDNS, and after instruction in the RDNS Education department, joined RDNS Centres and worked under the supervision of the RDNS Sisters. The Sister assessed each client, then introduced and supervised the Health Aide in the client procedure required. The Sister wrote out clear, concise procedural instructions on a work card which the Health Aid followed each visit. If the Health Aide noticed any change in the client’s condition, this was reported immediately and the Sister visited. The Sister made routine visits to the client for review at least monthly. Black and white photograph showing Royal District Nursing Service (RDNS), staff outside a brick building with a flat roof. A white RDNS car is on the right hand side of the photograph with "RDNS" in capital letters on the door. A tree is in the background. The twenty-five, some partly hidden, RDNS staff are wearing their uniforms. Some are wearing white patterned short sleeve dresses with a dark belt, and others white patterned short sleeve blouses and dark skirts. The letters "RDNS" are displayed in capital letter on the left hand upper pocket of the Sisters. Two Health-aides are present and are wearing dark coloured frocks with white piping. mdns, melbourne district nursing service, rdns, royal district nursing service, rdns centres

A hunter uses this tool to throw a spear in front of a fleeing animal, skillfully intercepting it so that it is speared on the run. The size of the groove and spear holder indicate this woomera was made for light weight hunting spears not for warfare. Elders and young warriors carried these with them and each man made his own to suite his strength and body size. They were used when the need and opportunity for fresh meat arose. Woomeras were used by men.This is the only Jaara woomera in the collection and is a significant tool used in the on going search for food. It is a mens tool.This woomera is undecorated. At the broad end there is a small hook like protrusion which holds the spear in place before throwing. The narrow end has a tapered waist with bulb to assist grip and a shallow groove to help guide the spear. The overall shape is an elongated hollowed single piece of timber.There are no inscriptions, the wood is strong with a prominent grain pattern.wood, jaara, tool, woomera, throwing stick, mens business, hunting

No specific information is available for this item. However, ivory was common in early 20th century household items, which were often purchased overseas as souvenirs. Many ivory items originated from Asia. Letter openers are still used today; however, they are now made out of steel as ivory is illegal.This item is an example of the use of ivory in domestic households early in the 20th century. A long, cream-white letter opener made out of ivory with a plain blade and rounded handle.There is decorative patterning on the handle consisting of holes and circles.ivory, letter opener, letters, chiltern athenaeum museum, mail

Two expansion rings attached to metal clip which would be attached in a pocket.Terry's No, 650|Patterned & registered|Made in England.domestic items, writing equipment

Pink and blue patterned sample of fabric, with rough cut edges. Fabric is doubled over and stitched together. A cream paper tag is attached with black printed text and hand written blue text.front: [tag] “GLENMILL” \ TWEED \ Pattern No. 4289 \ Piece No. 3602 \ Width 54 \ Length 52 5/8 \ Strings 2 \ 52 3/8 back: [tag] 80% WOOL / 20 % RAYON / 0 5 2 5/8

Ohlen-Bishop Saws were manufactured in Columbus, Ohio. The company has been master saw makers since 1852 with a factory being established in 1854 at the corner of Spring and Water Streets Columbus. In 1866, this establishment was considerably enlarged and in 1869, it was producing about eight hundred saws of different sizes and patterns, per day. By 1898 the company was employing 75 workers and was finally incorporated in 1884. In 1920 the James Ohlen & Sons purchased the H. Bishop & Co. and the company name was changed to Ohlen-Bishop Company. An early American saw maker with a history that gives a snapshot into a developing company that was regarded as a significant maker of saws for all applications with their products being exported all over the world.Two man Virginia cross cut saw with peg tooth pattern handles attached by means of wing nut.Maker Ohlen-Bishop Saws Columbus Ohio, Blade number 337flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

This hook is part of a rope machine.Hook from a rope-making machine, with nut and bolt endingflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, hook, rope machine, ropework, rope-making machine