Showing 5760 items
matching pig-iron
-
Wodonga & District Historical Society Inc
Tool - Hand forged iron alloy wedge belonging to railway carpenter Lachlan McEachern, c. late 1800s - early 1900s
The hand forged iron alloy wedge belonged to the railways carpenter, Lachlan McEachern, who became the President of the Wodonga Sub-Branch of the Victorian branch of the Australian Railways Union. He was presented with a framed Past Officers Certificate by the Australian Railways Union in recognition of services rendered in 1926. The certificate is also in the collection of the Wodonga Historical Society. The Wodonga train station opened in November 1873 when the section of the train line from Wangaratta to Wodonga was completed. The expansion of the railways to the northeast of Victoria occurred after the Victorian Government took over the railways in 1867 and the trains serviced large towns such as Seymour, Wangaratta and Wodonga, as well as smaller towns along the way. The hand forged iron alloy wedge has local and state significance due to its use by a Victorian Railways carpenter, Lachlan McEachern, in Wodonga. The local significance is also strong due to the prominence of the McEachern family in the Albury-Wodonga area.Hand forged iron wedge with a cracked flange/rim at the top, red-brown rust and some dirt on the surface.hand forged wedge, hand made tools, victorian railways, v.r., railways carpenter, wodonga, lachlan mceachern, iron alloy tools, mceachern family -
Bendigo Historical Society Inc.
Document - NATIONAL TRUST COLLECTION: CAST IRON COLLECTION, 1977-1978
Cast Iron Collection Series of letters re photographs for cast iron report Series of letters re cast iron museumbendigo, buildings, cast iron -
Flagstaff Hill Maritime Museum and Village
Caulking Iron
Owner of tools Jim Gillespie Clayton VictoriaCaulking iron or making Iron. This thin edged iron was used to stitch or make the oakum or caulking cotton into the seam before setting it down hard with the set irons. Iron has a chipped edge.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Kitchen Equipment, 'the edmay' Pot mender, c1930
Early settlers in Moorabbin Shire used large cast iron pots, pans and kettles, that were suspended over the open fire in the kitchen, for cooking meals. They had to be frugal and self-sufficient and so repaired the equipment to prolong its useful lifetime. Blacksmiths also made and repaired household equipment. James McEwan & Co 1852 - 1993 once dominated the the hardware retailing scene in Victoria. Established in 1852 to service the booming gold rush in Victoria the company went on to become one of the longest established retailers in Australia. Over it’s 140 year history the company went through many booms and busts. The McEwans name finally left the Australian retail scene with little fanfare when the last store was re-badged Bunnings in 1993Early settlers were frugal and self sufficient so they repaired their kitchen equipment when possible . McEwans Pty Ltd. was an established hardware company in Melbourne 1852-1993. Bunnings Pty Ltd is currently a successful hardware retailer for trade and public customers.Two metal discs with screw and nut for mending holes in cast iron pots, pans and kettles c1930 packing strip; THE edmay POTMENDER / Price tag ; McEWANS 77 - 11early settlers, market gardeners, cooking utensils, kitchenware, castiron cooking pots, blacksmiths, slow cooking, moorabbin shire, bentleigh, mckinnon, highett, cheltenham,mcewan james pty ltd, melbourne, bunnings pty ltd, -
Orbost & District Historical Society
scraper/chopper
An iron scraper or food chopper with an iron handle. It has a single blade. -
Puffing Billy Railway
Carbon - No. 986 Couliett / No. 90 Decauville Steam Locomotive, 1889
The locomotive was supplied new by Decauville to the Metropolitan Gas Company Ltd, Melbourne, for use at their gasworks in West Melbourne, where it was named Carbon suppied in 1889 (Couillet builder's number 986, Decauville serial number 90). It was named Carbon. The West Melbourne gas works sourced its coal from Maitland, New South Wales, and the coal was brought by ship to a wharf adjacent to the West Melbourne gas plant. John Benn and Carbon were used to haul the coal over a 762 mm (2 ft 6 in) gauge railway from the wharf to the gasworks, a distance of about 450 metres (500 yards). West Melbourne Gas Works No. "Carbon" Wheels: 0-4-0T Builder: Couillet Build Date: 1890 Construction No.: 986 Empty Weight: Unknown Weight on Drivers: Unknown Driver Diameter: Unknown Tractive Effort: Unknown Boiler Pressure: Unknown Cylinders: Unknown Fuel: Coal Gauge: 30 Decauville locomotives The firm Société Anonyme Decauville located at Petit Bourg, France, was founded to manufacture light railways pioneered by French farmer Paul Decauville to transport crops from the field in 1875. Decauville began designing their own locomotives in 1882, although initially manufacture was contracted out to other builders, notably the Belgian firm Hainault at Couillet Although not well known in Australia, in Europe Couillet was a significant builder of steam locomotives of many different gauges and sizes over a long period of time. The locomotive was supplied new by Decauville to the Metropolitan Gas Company Ltd, Melbourne, for use at their gasworks in West Melbourne, where it was named Carbon (986) . Carbon ( 986 ) The locomotive weighs approximately seven tons. It has the Couillet builder's number 986. of 1889 It was built for Decauville & Cie. of Paris, suppliers of portable and industrial railway equipment, and has their serial number of 90 of 1890. Built in 1889 for the West Melbourne site of the Metropolitan Gas Company, it is a four-wheel tank locomotive and was named “Carbon”. It was withdrawn from service in the 1930s and stored until sold privately in 1962. For a few years in the 1960s it was used on a circle of track at Walhalla, before going to the Whistle Stop Amusement Park in Frankston. Although a number of similar locomotives still exist, as far as is known Carbon is the only one still operating in its original condition. Historic - Industrial railways - Metropolitan Gas Company Ltd, Melbourne Steam Locomotive Small Decauville Couillet Steam locomotive. - Iron & wrought iron framesCouillet builder's number 986, Decauville serial number 90puffing billy, narrow gauge, industrial narrow gauge railway, couillet 986, decauville 90, steam locomotive, metropolitan gas company, carbon -
Puffing Billy Railway
Benwerrin Coal Company Coal Skip, circa 1899 - 1904
BENWERRIN COAL COMPANY SKIP This quarter ton coal truck or skip was used at a small mine situated at Benwerrin near Deans Marsh in Victoria’s Otway Ranges. The mine first opened in 1899 and closed in 1904. With the fuel shortages due to World War 2, the Benwerrin Coal Company reopened the mine in 1941. The coal was loaded into skips and winched out of Box’s Creek valley on a narrow gauge incline to a loading point that was close to the Deans Marsh-Lorne Road. It was then taken by road to the Deans Marsh Railway station. The average gradient of the tramway was 1 in 4 over a length of just under 500 metres (1600 feet). The gauge of the tramway has often been referred to as 375mm (or 15 inches) as shown on the map opposite taken from “Sawdust and Steam”. However, actual measurements of the wheels show the gauge to be 400mm (or 16 inches), which is quite unusual as is the small size of the skip itself. The mine produced up to 30 tonnes of brown coal each week until it closed in 1949 and the incline tramway and its skips were abandoned. Preservation of this coal truck came as a result of interest by the Tramway Museum Society of Victoria (TMSV) in the Barlow or Box type rails that it ran on. These rails had originally come from the Beaumaris Horse Tramway and were obtained by the Benwerrin Coal Company from Hayden Bros’ abandoned timber tramway at nearby Barwon Downs. Members of the TMSV visited the mine in the 1960s only to find that most of the tramway had recently been recovered for scrap. There remained a significant number of relics around the mine adits including most of the skips. One of these remained in good condition and it was recovered for preservation in May 1967. It was restored but never displayed and a second restoration took place by the author over 2012/13 so that it could be placed in the Menzies Creek Museum where it was delivered in February 2013. Little remains of the mine today with trestles and sleepers destroyed in the “Ash Wednesday” Bushfires in 1983. References: Houghton, N (1975), Sawdust and Steam, Light Railway Research Society of Australia. Historic - Industrial Narrow Gauge Railway - Benwerrin Coal Company , Benwerrin , Victoria, AustraliaCoal Skip - made of Iron sheet and wrought iron frame & wheelsB,C.Co Melbournepuffing billy, coal skip, benwerrin coal company, narrow gauge -
Anglesea and District Historical Society
Sad Iron or Flat Iron
Cast iron sad iron for domestic use - probably 19th century.sad or flat iron -
Clunes Museum
Domestic object - FLAT IRON
FLAT IRON SIZE 6 - IRON HANDLE - SILVESTER - FELIX MARKINGSlocal history, domestic item, iron, domestic items, irons -
Whitehorse Historical Society Inc.
Furniture - Bed - small
Small iron bed suitable for child. Iron lattice at both endsfurniture, domestic-nursery -
Flagstaff Hill Maritime Museum and Village
Functional object - Water Pump, Goulds Manufacturing Co, 1915-1925
Gould manufacturing company was founded in 1848 at Seneca Falls, New York when Seabury S. Gould purchased an interest in Downs, Mynderse & Co. and the firm became Downs & Co. Wooden pumps were produced at the time in an old cotton factory building. In 1869, the name of the company was changed from Downs & Company to Goulds Manufacturing Company. Seabury S. Gould was regarded as a man of unusual vision, and as the founder of Goulds Manufacturing Company he was keen to start producing cast iron pumps. An iron pump, he believed, would overcome all the disadvantages of a wooden pump. It would be strong and efficient and provide fresh flowing water for the pioneers. He ran the company until after the American Civil War and because Goulds Manufacturing had a foundry, they also produced all kinds of cast iron products such as corn shellers, bells, sad irons, sinks, tools, and a line of fire engines. From 1848 to 1964 a Gould family member had always been President of the company. However, the company ownership in 1964 was transferred from family-owned stock to public offerings and employee ownership of stock. The subject item called the "N e w Deluge" was an improved bilge pump for vessels having not more than 25 feet depth of hold. It was also used by contractors for pumping out excavations and was well adapted for irrigation use. This hand pump was designed to be used where a hand pump of large capacity was desired. Goulds made many different types of pumps to suit differing pumping situations such as. Well Pumps, Hydraulic Rams, Diaphragm Pumps, Tank Pumps, Sprayers and Small Capacity Power rumps. Goulds Triplex, Centrifugal, Rotary and Deep Well Power Pumps The subject item was first introduced to the market in the Goulds catalogue of 1915 and became a very popular pump used in Australia and the USA. It is manufactured by a company still trading today with offices in Australia and many other countries.Hand Pump cast iron with long reversable pumping lever and cylindrical casing there are 4 metal holes for fastening to floor surface. Painted black. Embossed "NEW DELUGE" "- - -" and "No 16" or "No 18".warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, pump, hand pump, goulds manufacturing -
Glenelg Shire Council Cultural Collection
Tool - Sheave Block, n.d
Port of Portland collectionport of portland archives, sheave block, wooden, iron -
Glenelg Shire Council Cultural Collection
Tool - Whaling Spade, n.d
Part of the collection purchased from Brendan Kurtze by the City of Portland. From the Kurtze Museum. Spades were used primarily for cutting up a whale. They were flat-bladed implements (except the gouge spade) with a chisel cutting edge and were mounted on wood poles by means of a socket at the aft end of the spade. The blades of later spades, after the 1850's, were usually made of cast steel, while the sockets and shanks were wrought iron. Cast steel held a cutting edge far better than the earlier wrought iron, and was necessary for repeated cutting. The sockets of spades were forge welded closed, without an open seam, for added strength. They were secured to the pole with a nail, screw or pinWhaling implement, iron, painted gloss black. Flat blade and handle sleeve on either end of shaft, no handle. Spades were used primarily for cutting up a whale. They were flat-bladed implements (except the gouge spade) with a chisel cutting edge and were mounted on wood poles by means of a socket at the aft end of the spade. The blades of later spades, after the 1850's, were usually made of cast steel, while the sockets and shanks were wrought iron. Cast steel held a cutting edge far better than the earlier wrought iron, and was necessary for repeated cutting. The sockets of spades were forge welded closed, without an open seam, for added strength. They were secured to the pole with a nail, screw or pinkurtze museum, whaling, tools, industry, maritime -
Kiewa Valley Historical Society
Cast Iron Camp Oven with Lid
Camp ovens were used for cooking indoors and outdoors. They were used to perform a variety of tasks and to last forever.The use of dry sand moulds for casting the iron created a smoother surface. A more even surface meant more even contact points with food. The lid is close fitting.Used by people in the Kiewa Valley including campers, drovers, shearers, bushmen, miners and groups eg.scouts to cook food.Camp ovens originally named Dutch ovens were made from cast iron, were heavy and were developed in the Netherlands in the 1700s. Australian drovers, shearers, bushmen, campers and miners used the cast iron camp ovens. This one has legs and was used outside. The lid is slightly concave enabling coals from the cooking fire to be placed on top as well as below. This provides more uniform internal heat and lets the inside act as an oven. Formerly UKV 023cast iron oven, outdoor cooking -
National Vietnam Veterans Museum (NVVM)
Plaque, 1 Company, 6 RAR
Wooden shield with silver metal front featuring a coloured image of a pig wearing yellow guernsey, black shorts, footy boots, field belt and holding a rifle.plaque, 1 company, 6 rar -
Flagstaff Hill Maritime Museum and Village
Caulking iron
Owner of tools Jim Gillespie Clayton VictoriaCaulking iron medium single grooved set iron this iron is of a very bulky nature and is probably inferior manufacture. B & F stamped on bladeflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Flagstaff Hill Maritime Museum and Village
Caulking Iron
Owner of tools Jim Gillespie Clayton VictoriaCaulking iron narrow single groove set iron. Stamped "F S".flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Puffing Billy Railway
H Class Bogie Flat Wagon
This vehicle was used on the Innisfail tramway line in Northern Queensland and given the "H" Classification. It was later sold to Howard Smith Industries. The wagon has been donated to the Museum and sees use on the Museum's 2'0" gauge line. Historic - Industrial Narrow gauge Railways - Rolling stock - Innisfail tramway line in Northern Queensland H Class Bogie Flat Wagon made of Iron, wrought iron and steelh class, bogie, flat wagon, 2'0" gauge -
Parks Victoria - Gabo Island Lightstation
Axle and wheel rims
Rusted wheel rims and axel were recovered from scrub near the ‘Eastern Landing’ in 2002. The two large wheel rims are made of flat iron. The axel is a long metal shaft with built up sections at either end. They are possibly from a WWI, horse drawn gun carriage used to carry stores from the jetty to the lightstation. Images show the carriage in use in 1943. The items have second level contributory significance for their historic value and provenance to the lightstation. .1 & .2, Large rusted, circular, metal wheel rims. Made of flat iron. .3, Rusted metal axle. long shaft with built up sections at either end. -
Federation University Historical Collection
Tool, Shave, Spokeshave, Plane
A spokeshave is a very short plane, oriented horizontally, with a handle on each side. It is a general purpose tool for circular work when working with timber or leather. Commonly used by painters, wheelwrights and saddlers. This exhibit features an iron cutter clamped between two wooden handles, one of which can be unscrewed to enable it to work in cramped spaces. Four faced Shave-Spokeshave with an iron cutter clamped between two screw handles. This version features one detachable wooden handle which can be unscrewed to enable it to work in cramped spaces.'Fitch' embossed into handle - right hand endplane, shave, spokeshave, fitch -
Flagstaff Hill Maritime Museum and Village
Tool - Joiner, Jack or Smoothing Plane, Akin & Son, 1900 to 1966
The subject item is a smoothing plane traditionally wood planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding or had a flat blade use for achieving a flat and smooth finish to timber. The blade, or iron was likewise formed to the intended moulding profile or for smoothing and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding and flat bladed planes for a full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. The maker Atkin and Sons were a prolific Birmingham plane maker, active from 1863 to 1900 when they became Atkin and Sons Ltd and traded until 1966. Their trademark was actually "BENEFACTUM" which is Latin for "well made."A well-made tool from the early 20th century from a well-known company that ceased trading in Birmingham in 1966, today this tool from this company is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes as well as smoothing timber projects were created by the use of hand tools. Tools that were themselves handmade shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to finish timber.Jointer or Jack Plane with fishtail handle, Size of iron 2 1/2 inches wide, Stamped GN inside W made by Akins and Sons Birmingham UKflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, jointer plane, plane -
Wodonga & District Historical Society Inc
Functional object - "Creda" Electric Iron, Credenda Conduits Co. and Simplex Electric Company Ltd, c1950s
Creda had its origins in two companies: the Simplex Steel Conduit Company Ltd. (later Simplex Conduits Ltd.) formed in 1898, and the Credenda Company Ltd. which was the first to use Creda as a brand name. These companies were two of the founding companies of Tube Investments Ltd. From 1919, the Simplex name was used for installation equipment ranges, and Creda for heating, cooking and other domestic appliances. In 1932 Simplex Conduits Ltd. and the Credenda Company Ltd. merged to form the Simplex Electric Company Ltd., but the distinct Simplex and Creda brands continued in use. In 1987 the Simplex Electric Company was taken over by General Electric Company, and formed part of General Domestic Appliance Company Ltd. the following year. In 2015 the large corporation, Whirlpool, took over the Indesit Appliance Company, which owns the Creda brand name. Since then the Creda brand as such has become rare, and where it does appear it is as a re-badged version of Indesit and Hotpoint home appliances.This iron is typical of the electric irons used in the 1950s. It is representative of appliances used by women in their domestic roles.A "Creda" Electric Iron with plug-in cord. It has a metal steel base iron with a wooden handle and a thumb rest. The handle is bolted onto the iron with 2 large screws. The cord socket plugs in behind the handle of the iron. On attached metal plate: "CREDA/ Cat. No 6; Volts 240; AMPS 8"domestic appliances, creda irons -
Warrnambool and District Historical Society Inc.
Functional object - Newcombe timber company Seal, Mid to Late 19th century
Newcombe and Co traded as timber merchants And iron mongers in Koroit Street in the later part of the 19th century and early 20th century. It was destroyed by fire in March 1918.A commonly used office item which is well linked to a long established business in Warrnambool.Cast iron rectangular base with arch form leading to handle. Painted black and decorated with gold scroll work. Orange line around rectangular base. The seal is operated by pushing down the handle which stamps on paper which would be placed between the circular stamp and the base plate.warrnambool, company seal, embossing seal, newcombe timber company, koroit street -
Flagstaff Hill Maritime Museum and Village
Container - Barrel, 19th to early 20th centuries
The original barrel was tapered outwards from top to base. It had three iron bands. Only the top and base remain. Barrels with outward tapering bases are balanced and stable. Barrels contain a wide range of contents, both liquid and dry, from wines and spirits to cement. Ships have used barrels as shipping containers for cargo. Specially made rope slings were used to move the barrels to and from the ships by rope blocks and cranes. A huge quantity of cement was brought to Warrnambool in barrels to construct the Breakwater, which was completed in 1890.This parts of a wooden barrel represent the containers used for cargo imported from England into Australia in the 19th and early 20th centuries. As an example, the vessel Edinburgh Castle was wrecked in Lady Bay, Warrnambool, in 1888. The cargo onboard was a consignment of casks, or barrels of cement for the construction of Warrnambool’s new Breakwater, which was completed in 1890. Barrel; remnants of a tapered wooden barrel that once had three iron bands and removable top with heavy wooden handle. Only the lid remains. flagstaff hill, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coas, barrel, cask, cooper, cargo, coopering, storage -
Mont De Lancey
Hammer and 2 Knives/Cutters
Wandin Thomas Sebire JP (1867-1960) learnt boot-making as a young man. In a small workshop on his property in Sebire Avenue, Wandin he made boots for family, friends & neighbours. He also repaired boots & made other small leather articles. Bootmaking is a complex process requiring a variety of tools. The leather is cut to shape, glazed & burnished (polished) with heated irons. The pieces are stretched onto, & nailed to, a wooden last to form the boot. Once attached to the insole, the boot is finished on a metal last. Uppers are stitched with waxed thread through holes made with an awl. Heels comprise pieces nailed together & neatened with a heel shave. Metal plates, short nails or hob nails driven into the sole & heel, often in a pattern, improved durability.Cast iron hammer with a wooden handle. Larger Cutter/knife, cast iron with a wooden handle. Smaller Cutter/knife, cast-iron with a wooden handleHammer: "London" Larger knife: "Pettys Sheffield".bootmaking tools, hammers, cutting tools -
Mont De Lancey
Knife Cleaner, Circa 1910
Hand cranked, cast iron knife cleaner. Cast iron circular barrel, with iron and wood handle. Cork/chamois ?, within barrel for cleaning knives."Beatrice Knife Cleaner" on the front. "Rd. No 686261" on the back.knife cleaners -
Whitehorse Historical Society Inc.
Container - Packet - Starch
Packet 'Silver Star' starch with illustration of ironing lady in ironing room with ''Gentlewoman'.'Silver Star Starch' won't stick to iron|The Best in the Worlddomestic items, laundering -
Glenelg Shire Council Cultural Collection
Functional object - Anchor, n.d
Bower Bird Museum, Vanda Savill's collection, Heywood. Museum closed 2006.Iron Anchormaritime, marine technology, ships, vessel -
Coal Creek Community Park & Museum
Iron
Triangular Iron -
Coal Creek Community Park & Museum
Iron
Triangular iron