Lmap was hung in the old Malmsbury HotelSpherical shaped lamp made of tin, decorative features on this part, which holds the kerosene. Protruding from either side are two kerosene burners (no glass with this lamp). Lamp has a large handle lamp, lantern, kerosene

Kerosene "Hurricane" Lamp has container at the base for fuel. Has curved rounded glass to cover wickFitzall N.Y.U.S.A. (on glass)lamp, lantern, kerosene

this signal lamp was used at the Numurkah Railway StationBlack-painted tin, cylindrical in shape, with handle. Circular lens at the front with brass-coloured edging. Smaller red lens at the back with white edging. Side slot for hanging lantern onto post or hook. Round chimney/vent at the topNumurkah (metal embossing)railway, lamp, lantern, kerosene

Black painted tin horizontal cylindrical shape on a cylindrical shaped base. Glass lens at the front with silver edging . Two tiered chimney for ventilation. Smaller Red lens at the back. Two protruding side pieces for hanging on hooksDietz Octo Driving Lamp New York U.S.A. (on back)lamp, lantern, driving, kerosene

Glass Kerosene Lamp - clear glass cylindrical base, bulbous body with tapering neck, with fluted decorative opening on the glasslantern, lamp, glass, inside, table, kerosene

Silver-coated tin kerosene burning lampHas small round base with cut-outs, extending to a heavily decorated rounded bowl lamp, kerosene, table

Kerosene Lamp for a bike. Tin rectangular shape painted black. Silver round edging surrounding a glass lens. Protruding from the side is a small triangular shape with a red lens facing back. Also at the back is spring bracket used for mounting the lamp on the bike. One side also has a regulator dial. bike, bicycle, lamp

Chrome Bicycle lamp has round glass lens at the front with red reflectors at the side and facing the back. Mounting clips are at the back. The top has a screw lid for fuel. and a regulator. Fuel is stored in a cylindrical container attached to the light's lens area. Cracked lensPanther B'Ham (on top of fuel cylinder)bike, bicycle, lamp

Metal curved rectangular box with handle on top and round lens at the front bike, bicycle, lamp, dry cell

Round cylindrical metal with lens at the front .Lens ahs a metal visor over the top. Lens is hinged and clipped into place motor-bike, light, lamp

Yellow painted metal kerosene lamp has cylindrical container for fuel at the base and an upright piece at the back with a tin circular reflector. On top of the fuel container is a wick-burner (no glass cover)V inside a "three-leaf clover" Made in Englandkerosene, lamp

Large Platform Lamp used by Railways to signal train at stoppings, Cubed in shape with angled sides. Plain glass front, Red-coloured lens on both sides, which can be opened to reveal plain glass.. Covered chimney on top . Bracket on the back to hang the lamp up. railway, platform lamp, lantern, signal, kerosene

Black painted tin box. Hexagaonal in shape. Opening at one end for sliding lenses. Wing nuts either side of box. Vent holes in top and bottom sides. Latched back entry, hexagonal in shaperailways, signal, lamp, kerosene

Black painted tin rectangular in shape with two hinged coloured filters at the front (red and yellow). Also a hinged piece of tin at the top which can be lowered over the top of the front filters. Small cylindrical chimney on the top. Regulator dial on the side. Round metal area inside to place candle inrailways, signal lamp, lantern

Lamp made from metal/tin. Cylinder base to store the kerosene, with pump attachment to pump kerosene up to the lamp area. The lamp is attached to the base via a metal tube. the lamp is cylindrical with clear plastic lenses. On top of the lamp is a perforated metal cylinder for venting the fumes. on top of that is a metal circle for hanging the lamp. This is also a long screw which can be undone to access the lamp area. The whole lantern has a thick metal wire loop handle.lamp, lantern, kerosene, light

Metal cylindrical base to store kerosene. Above this area is a cylindrical glass area for the actual lamp light. Above this is a metal cylindrical cover with perforated holes for venting fumes. A thick metal wire handle is attached to the sides of the lamp. Access to the inside of glass area is via two spring-loaded clamps on either side of the glass area.On glass: Pyrex, Aladdin, Made in Australialamp, light, lantern, kerosene

Metal (silver-plated?) cylindrical base with a column rising up to a cylindrical storage area for kerosene. On top of this are three wires protruding out from the burner area. These wires would be used to hold the glass lens (not with the lamp)lamp, lantern, light, kerosene

Metal cylindrical base to store kerosene. Metal "arch" connected to the base and holding the top metal vent in place. The top vent and bottom vents have wire metal holding the glass lens in place. There is also a wire handle Lanora Australia, on baselamp, lantern, light, kerosene

Solid metal base with decorative pattern. on-off switch is on base. Flexible metal upright leads from the base to the light globe socket (globe missing). This is covered by a metal half-sphere hood. Lamp has no electric cord attached.light, electric, desk lamp

Belgrave railway bridge looking towards Bayview Road from Terrys Ave, 1947. It shows a bus crossing the bridge onto (now) Belgrave-Gembrook Road, followed by a male cyclist wearing a dark overcoat and bowler hat. A man wearing a homburg hat is crossing the footbridge beside the main bridge towards the main street. There is a pale van parked (or driving past) a dairy on the corner of Bayview Rd and Belgrave-Gembrook Road. A brick toilet block is shown with a sign saying 'MEN' on a nearby lamp post.

Green-brown Eboracum LXXI 1971 Replica Roman oil Lamp with rope and explanatory noticeEboracum LXXI

Brass, metal and wood tripod for use with a heliograph complete with canvas and leather carrying handleStand. Lamp for helio a mark III. Number 3710 PMG Vic 1941

Demonstrates the type and style of lamp used in tramways or street cars, made by a company who specialised in the manufacture of electrical products.Electric Lamp or light bulb - stored in a cardboard box with shredded paper. Lamp manufactured by the Edison Company of the USA, for "Street Railway" use. Consists of a glass bulb with a wire vertical filament with a screwed base. Marks on top of the lamp have faded. Filament appears to be working order. Information on the top of the lamp and the box provided by the donor. Made in the USA - possibly New Jersey See https://en.wikipedia.org/wiki/Edison_light_bulb - accessed 25-08-2021 for a short history of the lamp.trams, tramways, tramcars, scrubber tram, electrical equipment, lights

Yields information about the streetscape of Bridge St about 1880, prior to trams, with horse drawn carts and gravel streets and businesses.Black and White copy photograph of a Gold Museum photograph - Bridge St, about 1880. Looks from intersection with Main St to the west. Shows many horse drawn carts, people, gravel paved streets with bluestone gutters. Buildings in the image - Pittards Warehouse, M.J. Robinson and Shilling Arcade. On the right hand side are three lamps, one with a sign "Good Beds 1s". Original photograph (not in book) has a handwritten note "Bridge St about 1880 presented by Miss Anderson." Has pins hole showing in the original print. Collected by Alan Bradley from the Gold Museum early 1980's. Used in The Golden City and its Tramways - page 8.tramways, trams, bridge st, horse drawn vehicle, main st

Glass chimeny for a kerosene lamp, bulbous middle with flared top.lighting, kerosine & oil, chimney

Glass chimeny for a kerosene lamp, bulbous middle with flared top.lighting, kerosine & oil, chimney

Glass chimney for a kerosene lamp.lighting, kerosine & oil, chimney