Ticket allowed Scholars or school children to travel on MMTB trams/buses to attend schools at a concession rate. This one was used on buses. Inside gives issue details - issued to a person in Kew to attend University High School, five sections, for use to 18/12/1959, from Earl St to Lygon St via Princes St and Johnston St. Cost 50/- Ticket No. 1242.Demonstrates a Scholar's ticket to allow a student to travel from Kew to Lygon St.Blue clothed backed paper ticket, printed as a MMTB "Scholar's Concession Ticket", for 3rd Term. Gives condition of use on the outside cover. Details filled in of the person's name address etc.mmtb, tickets, schools, scholar's tickets, school tickets, buses

Manufactured by the Bell Punch Company Ltd of London as the "Ultimate Fare System", for issuing bus and tram tickets. Used by the MMTB for street sellers at Safety Zones in Melbourne. See items 7504 for a roll of 10c MMTB tickets and 7889 for a circular regarding their introduction in 1951. The machine was received from the donor with five rolls of NSW bus tickets - 3 Section, 25c, 45c, 60c and $1.00. Demonstrates a ticket machine used at Melbourne tram stops by "Safety Zone sellers".Complex apparatus consisting of metal parts, grey frame, levers, numbering counters, fitted with a cloth strap with clips and brown plastic backing. Contains five rolls of paper tickets. Strap 25mm wide x 1100 long leather with clips.Engraved on the top part "MMTB No 9"tickets, ultimate, mmtb, machine issued tickets, ticket machines

Notice to Drivers, conductors and conductresses titled "Fare Change cards" for reference for the period from 5/12/1965 to 13/2/1966. This followed an increase in fares and prior to the introduction of decimal currency on 14/2/1966. The card gives the revised fares for each section, and all night fares. Dated 15/11/1965 and signed by R C Drummond as Traffic Manager.Yields information about the fares prior to the introduction of decimal currency.Notice printed on quarto paper with a piece of paper glue to the base on the rear.tramways, fares, decimal conversion, conductors, crews

Chronological history of the RVIB, from newspaper and annual report sources. Possibly put together by C.H. Nipper, it covers the first meeting of the provisional committee for the Asylum and School for the Blind in 1866, application for land, buildings, financial concerns, development of school and nursery, introduction of library service and some employment services. The earlier section has more detail about the building, with minimal information after 1900.21 foolscap pages (missing page 11)royal victorian institute for the blind, c.h. nipper, deaf-blind, rehabilitation, education, employment, buildings, fundraising

The home of Frederick & Julia Lowen was re-located in 1933 to allow Blackburn Road (which then ended in the vicinity of what is now Hawthorn Road) to be extended through to Burwood Road (now Burwood Highway). That section of Blackburn Road that now runs between Burwood Highway and High Street Road was originally Hewlett Road and from High Street Road to Princes Highway Was May Road.Black & white photo of the Lowen home at East Burwood in the mid 1920s. The lady on the right is presumed to be Julia Lowenlowen family home, east burwood

Heritage Excursion - Maroondah Aqueduct Walk - Saturday 3rd September The Maroondah Aqueduct was once a major link in Melbourne’s water supply system. It was built between 1886 and 1891 to transfer water from the Watts River near Healesville to the Preston Reservoir. It was 66 km in length, made up of 41 km of open channel, 10 km of tunnel through hills and 15 km of pipeline across stream valleys known as inverted siphons. The section of the aqueduct through the Eltham area has been abandoned since the 1980s but the open channel has largely been retained. A recreational path follows the aqueduct reserve. For our excursion on 3rd September we intend to walk along the section of the aqueduct adjacent to Allendale Road. This is a section not visited on previous excursions and includes the transition from open channel to the inverted siphon across the Diamond Creek valley. Apart from the aqueduct itself the main feature of the walk is the extensive views across Eltham North and Diamond Creek. Along the way we will talk about the history of the aqueduct and the area. This easy walk is about 3 km return and will take 2 to 2.5 hours. It will start at 2pm at the junction of Allendale Road with Godber Road and Zig Zag Road North, officially Diamond Creek, but on the northern boundary of Eltham. (Melway ref.12 B10). Newsletter No., 229, August 2016 Abandoned and rusted house base probably purposed to water or feed cattle. Born Digitalmaroondah aqueduct, eltham north, activities, eltham district historical society, heritage excursion, bath, acqueduct trail

Heritage Excursion - Maroondah Aqueduct Walk - Saturday 3rd September The Maroondah Aqueduct was once a major link in Melbourne’s water supply system. It was built between 1886 and 1891 to transfer water from the Watts River near Healesville to the Preston Reservoir. It was 66 km in length, made up of 41 km of open channel, 10 km of tunnel through hills and 15 km of pipeline across stream valleys known as inverted siphons. The section of the aqueduct through the Eltham area has been abandoned since the 1980s but the open channel has largely been retained. A recreational path follows the aqueduct reserve. For our excursion on 3rd September we intend to walk along the section of the aqueduct adjacent to Allendale Road. This is a section not visited on previous excursions and includes the transition from open channel to the inverted siphon across the Diamond Creek valley. Apart from the aqueduct itself the main feature of the walk is the extensive views across Eltham North and Diamond Creek. Along the way we will talk about the history of the aqueduct and the area. This easy walk is about 3 km return and will take 2 to 2.5 hours. It will start at 2pm at the junction of Allendale Road with Godber Road and Zig Zag Road North, officially Diamond Creek, but on the northern boundary of Eltham. (Melway ref.12 B10). Newsletter No., 229, August 2016 Abandoned rusty farm machinery possibly used for tilling the soil - off the Aqueduct trail Born Digitalmaroondah aqueduct, eltham north, activities, eltham district historical society, heritage excursion, aqueduct trail, farm machinery

Heritage Excursion - Maroondah Aqueduct Walk - Saturday 3rd September The Maroondah Aqueduct was once a major link in Melbourne’s water supply system. It was built between 1886 and 1891 to transfer water from the Watts River near Healesville to the Preston Reservoir. It was 66 km in length, made up of 41 km of open channel, 10 km of tunnel through hills and 15 km of pipeline across stream valleys known as inverted siphons. The section of the aqueduct through the Eltham area has been abandoned since the 1980s but the open channel has largely been retained. A recreational path follows the aqueduct reserve. For our excursion on 3rd September we intend to walk along the section of the aqueduct adjacent to Allendale Road. This is a section not visited on previous excursions and includes the transition from open channel to the inverted siphon across the Diamond Creek valley. Apart from the aqueduct itself the main feature of the walk is the extensive views across Eltham North and Diamond Creek. Along the way we will talk about the history of the aqueduct and the area. This easy walk is about 3 km return and will take 2 to 2.5 hours. It will start at 2pm at the junction of Allendale Road with Godber Road and Zig Zag Road North, officially Diamond Creek, but on the northern boundary of Eltham. (Melway ref.12 B10). Newsletter No., 229, August 2016 Brick bridge on Parsons road, Eltham North over the aqueduct on the aqueduct trail. Born Digitalmaroondah aqueduct, eltham north, activities, eltham district historical society, heritage excursion, parsons road, bridges, aqueduct trail

In 1947 Shire President Cr. Charles F. Pollard called a public meeting for the purpose of discussing the forming of an Agricultural Society to raise funds for the proposed Wodonga Hospital. Cr. Pollard was the inaugural President of the Wodonga Show Society and was joined by seven past Shire Presidents as part of an original 25 member Wodonga Show Society committee. In addition to the committee, there were 150 members of the inaugural Society. The first Wodonga Show was held on Saturday 6 March 1948. The first Sun-News Pictorial Miss Show Girl competition was held in Victoria in 1957, an annual tradition that lasted into the 1990s. Most country shows held heats to find a local winner before the final was judged at the Royal Melbourne Show each year. The first Miss Wodonga Show Girl competition was held in 1958. It was open to all girls between the ages of 16 and 23, born in Australia or naturalised Australians. Judging will be on the following basis of deportment, dress sense, grooming, general appearance, personality. Wodonga Show Society presented a prize to the winner who was accompanied to the final judging on People’s Day at the Melbourne Royal Show. This sash was awarded to Miss Wodonga Show Girl in 1966. The winner of the Senior Section was Ludmilla Bartosz of Wodonga. The Junior Show Girl section was won by Sue Maddison of Bandiana. First prize in the Senior section included this sash, $20 in case and a first class return rail fare to Melbourne for the final judging at the Royal Melbourne Show.A blue sash with gold trim and lettering and a fringe trim.WODONGA SHOW 1966 MISS WODONGA SHOW GIRL SASH DONATED BY PENNANT PRODUCTS MELB.wodonga agricultural society, wodonga show, miss wodonga show girl

Murray Comrie Collection. This image depicts stores in the main street of Tarnagulla, including the two-storey bank building being used as a licensed general store. The building on the left was also a bank, originally constructed by the Union Bank in 1859, and Is probably the first brick and stone building at Tarnagulla. It was used by the bank until 1888 at which time the Union and Colonial banks amalgamated. After this, the building was used for a variety of purposes. The milk bar section was constructed in the 1920s in an area at the front of what had once been the Bank’s manager’s residence. The Two-story bank building On the right was constructed and used by the Colonial Bank of Australasia (from 1866 to 1888) and, following bank amalgamation, by the Union Bank (from 1888 until closure in 1942). The original site had been occupied by Joseph Foo's store, a large wooden building with attached theatre. While the bank was being built, the Colonial Bank operated from the former Company's Hotel (soon after to become the Borough of Tarnagulla Council Chambers, then the Mechanics’ Institute, and finally, prior to final demolition in 1980, Burstall Hall) The new double-storey building was used by the Colonial Bank from 1866 until 21st February, 1888. The premises were sold to the Union Bank for £2500. The Union Bank moved in and commenced operations on 6th June 1888, continuing until 1942. The building was later used as a general store until the 1990s. It is a now private residence. This is a reasonable copy of an older original. Copy probably made by Murray Comrie in the 1970s. Monochrome photograph depicting a section of Commercial Road, Tarnagulla near the intersection with Poverty Street, including two stores - one a bakery/milk-bar and the other a general store operating in the former Colonial/Union Bank building. Photograph taken from north of milk-bar. Two people walking away from photographer on footpath/curb between the two stores. The building on the left was the Union Bank premises, constructed in 1859 and Tarnagulla's oldest surviving brick building. The Union Bank absorbed the Colonial Bank in 1888, and the Union Bank moved operations next door into the much larger former Colonial Bank premises which had been constructed in 1865/66. After amalgamation, the old Union Bank premises was then used for a variety of purposes from visiting doctor's rooms to cafe, etc. The Union Bank continued to operate at Tarnagulla until closure in 1942, at which time business had fallen away and Tarnagulla Branch had already been downgraded to sub-branch status. tarnagulla, banks, banking, commerce, stores, shopping, shops, food, groceries, buildings, commercial road

A cutting or serrated tracing wheel with a wooden handle. The metal arm holding the cutter is inserted into the wooden handle. The circular cutter has sharp spikes (the serrating wheel) which turn. The box used to store the wheel: Oblong cardboard box with separate lid. Inscription on top part - black on green background: Nicholson File Co. / Port Hope Ont. / Mae in Canada/Patent / Increment Cut / Warranted / and made from / Best / File SteelCutting wheel: Side 1: B. Humphreys engraved into the metal section holding the spiked wheel. Side 2: Made in England Box: Hand written in black ink on the bottom of the box: "To Betty / with love/ from Gran" On bottom end of box: black on green background: Nicholson / Warding Bastard / 1 doz. 4 and a half inch.sewing tool, ron white

This pump is an Ajax Type L2 Series A model, made and sold by McPherson’s Pty Ltd of Melbourne circa 1930’s to 1940’s, is a mechanical, hand operated, constant flow pressure pump. It would have been used to pump fluids from one area to another, for example from a dam to a tank or used as a bilge pump on a small vessel, mounted on the vessel’s bulkhead, floor or deck. This type of hand pump is sometimes called a ‘Reciprocating Suction Pump’. It has a mechanical pumping action of the lever moves the piston inside the pump up and down. The water is lifted from below the pump through the inlet pipe and into the pump’s cylinder. This action causes the lower valve to close and the piston’s valve opens and the pressure within the pump forces the water out of the pump through the exit pipe. The limitation of this type of pump is that it can only raise the water a maximum of about 7 metres from beneath the ground and yields 24-26 Litres per minute. This type of pump could be used for many purposes such as pumping water or fuel. McPherson’s 1940’s advertisement proclaims “For all jobs on the land – irrigation, spraying, tank, plumbing, fire-fighting – there’s a suitable “Ajax” pump. Send us the details of you pumping problem. Our Expert’s advice will help you choose the right pump – the one that will give you most years of PROFITABLE PUMPING.” (The Australasian (Melbourne) Sat. 26th October 1940.) McPherson’s Pty Ltd, the manufacturer, advertised a similar pump to this one in The Australasian (Melbourne) in 1936, calling it the Ajax Double Acting Hand Pump. In 1942 another advertisement advised that a representative for a fire-fighting equipment supplier was visiting the western district of Victoria. The company could now supply double-action two-spray Ajax pumps at lower prices than similar pumps the district had recently purchased from Adelaide. McPHERSON’S FOUNDER and COMPANY TIMELINE 1860 – Thomas McPherson, a Scottish immigrant (c. 1853 ), founded McPherson’s in Melbourne, supplying pig iron (lead ingots imported as ballast in ships) to local manufacturers. 1882 – Thomas McPherson established a warehouse in Collins St Melbourne and included tools, steam fittings and machinery in his wares. The business expanded to include steam saw mills and became known as Thomas McPherson and Sons (William Murray and Edward). 1888 – Thomas passed away and his sons inherited the business. In 1896 William Murray became the sole proprietor after his brother Edward’s death. 1900 – The firm expanded, establishing Acme Bolt Company to manufacture nuts and bolts. 1912 – McPhersons Pty Ltd established a machinery warehouse and showroom in 554-556 Collins St Melbourne. McPherson’s went on to establish branches in Sydney (1911), Adelaide (1921) and Perth (1930) 1917 - McPherson’s supplied ‘dog spikes’ for the transcontinental railway, running from Eastern to Western Australia. 1918 – A tool works set up in Kensington, Melbourne, manufacturing Macson lathes and made machine tools that previously had to be imported. 1924 – The Bolt Works was transferred to a new building in Melbourne. McPhersons began making pumps. 1929 – McPherson retired. His son (Sir) William Edward McPherson (known as ‘WE’), was born in Hawthorne, Melbourne, in 1898. After his education he began work in his father’s Melbourne hardware and machinery business He took over as governing director when his father retired. 1929-1932 – McPherson’s supplied thousands of tons of rivets from its Richmond (Melbourne) Bolt Works for the construction of the Sydney Harbour Bridge. 1936 – McPherson’s Pty Ltd is advertising Ajax Pumps in newspapers 1934 – McPhersons purchased the property adjoining the warehouse in Collins Street, and during 1935-1936 built a new office and showrooms on the site of 546-445 Collins St. 1939 - McPherson’s acquired the Tool Equipment Co. Pty. Ltd and Associated Machine Tools Australia Pty Ltd was formed to separate McPherson’s machine-tool manufacturing and merchandising interests. 1939 – Ajax Pump Works, a foundry and pump manufacturing plant, was established in Tottenham, Melbourne, and the Ajax Bolt and Rivet Co Pty Ltd began manufacturing in New Zealand. 1944 - McPherson’s became a public company, McPherson’s Ltd. 1948 - The Ajax Pump Foundry opened at Kyneton, Victoria and in the post war years it grew to became a large manufacturer. 1980’s – Ajax Pumps brochure lists the address as 6 Buckhurst St, South Melbourne, Vic 3205 with the Telephone number 03 669 3588 1988 - Ajax Pumps acquired the Forrers Company, which was established in 1921. Manufacturing in Ipswich, Queensland, specialising in submersible sewage pumps. 1991 – KSB Ajax was formed, bringing together the companies KSB and Ajax Pumps 1993 – Manufacturing was moved to state-of-the-art premises in Tottenham, Victoria 2001 - The Forrers facility was moved to Tottenham. 2007 - Company name KSB Ajax Pumps was changed to KSB Australia Pty Ltd. 2009 - KSB Australia opened a branch in Townsville, Queensland. 2011 - KSB Australia moved to its dedicated Water and Waste Water Competence Centre in Bundamba, Queensland. DISPLAY OF THIS AJAX PUMP This pump was installed at Flagstaff Hill Maritime Village as part of a working display in the village by the Friends of Flagstaff Hill, in acknowledgement of the dedicated involvement of one of its long serving members, Bob Crossman. The display was officially opened 31st March 2018 and incorporates a restored Furphy Tank and Water Pipe Stand. The pump is used to draw water from the lake, through the water stand pipe and into the reconditioned Furphy Tank. This Ajax pump made by McPherson’s Pty Ltd is significant for its association with McPherson’s, a prominent manufacturer of hardware in Victoria. McPherson’s is famous for supplying ‘dog-spikes’ for the transcontinental railway (eastern to western Australia, 1917) and rivets for the Sydney Harbour Bridge (1929-1932). The Ajax pump is also of significance because of its association with McPherson’s Governing Director (Sir) William McPherson, former premier and treasurer in Victoria 1928-1929. The former McPherson’s Pty Ltd building in Collins Street Melbourne is now on the Victorian Heritage Register VHR H0942 This pump is representative of mechanical pumps popular in the early to mid-1900’s and still used today. Hand operated pressure pump, double acting. Cast metal case, painted red, with steel hose attachments and long metal lever. Pump is bolted to wooden plank. Model of pump is AJAX, Type L2, Series A pump. Embossed on lower section of pump "L2 - 10", "L2 - -1", "AJAX" “(?) –2-1” Embossed on lower handle “3-7” “L – 4” Embossed on attached plate “FOR SPARE PARTS / TYPE L2 / SERIES A / PUMP ASSEMBLED BY T R” Manufactured by McPherson’s Pty Ltd of Melbourne circa 1930’s - 1940’s.flagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ajax pump works tottenham melbourne, ajax pump factory kyneton, william edward mcpherson, thomas mcpherson of melbourne, mcpherson’s pty ltd melbourne, acme bolt company, tool equipment co. pty. ltd, associated machine tools australia pty ltd, ajax bolt and rivet co. pty ltd new zealand, forrers company ipswich queensland, ksb ajax pumps, ksb australia pty ltd, macson lathes, tool manufacturer early to mid- 20th century, ajax double acting hand pump, ajax type l2 series a pump, qisjax pumps, water pump 1940’s, fuel pump 1940’s, hand operated constant flow pressure pump, reciprocating suction pump, agricultural hand pump, plumber’s hand pump, portable hand pump

War news for Australian armed forces in BougainvilleAustralian newspaper, the Torokina Times, Vol 1, No 55, from Bougainville. It is a typed publication on brown paper. There are two double-sided pages. The first page includes a special order by Major General W Bridgeford, Commander 3 Australian Division dated 30 October 1945. Number of typed articles within the newspaper are: GENERAL MARSHAL DELIVERS STERN WARNING TO AMERICA BRITISH PM TO VISIT AMERICA FOR TALKS ONO ATOMIC BOMB US MARINES STAND TO IN CHINA PRESIDENT VARGAS RESIGNS IN BRAZIL TRADE UNION LEADER URGES GUARANTEED FAMILY INCOME OF 5 POUNDS A WEEK SPORTING SECTION NEWS BRIEFS torokina times, bougainville, australian armed forces, wwii newspaper, newspaper

Photograph from 1930 newspaper cutting taken of residents Celebrating Stawell Diamond Jubilee in Stawell Town Hall. The photograph taken of the interior in the town Hall showing the painting at the one end of the hall. Note the wooden door head decoration. The newspaper is dated October 18, 1930. The large crowd fills the scene taken of residents in the hall spilling over to the stage area. Black and white newspaper photograph of a large crowd inside a hall taken in 1930. There are 2 photographs of newspaper cuttings from The Weekly Times of the crowd scene.The WEEKLY TIMES Magazine section 6, October 18, 1930, Stawell Celebrates Diamond Jubilee by Entertainment of Old Residents. Happy Party at the Old Time Ball in Stawell Town Hall. Handwritten - X Grace where cross is near Stage on one newspaper cutting. On the second newspaper cutting is Belle Mcleod marked with an X.stawell

Building report Ringwood East Reserve from C Merry, Building Surveyor and Mr Lucas to the Mayor and Councillors Borough of Ringwood 17/7/51. Building can be jacked up and reblocked where necessary. 300' of flooring is necessary in the west section. Roof, spouting and downpipes require overhauling. Needs some repair work inside and outside. Estimated cost 220 pounds.

This boot belonged to Thomas Rome and may have been either an apprentice’s model or a display item in his boot and shoe shop or both. Thomas James Rome (1873-1974) worked in John Younger’s store in Beechworth before both came to Warrnambool in 1888. Rome worked in Younger’s store in Liebig Street, Warrnambool for 17 years and then established his own boot and shoe store at 115 Liebig Street in 1907, retiring in 1962. He married Amelia Saltau and they lived at Murweh at the corner of Liebig and Princess Streets, Warrnambool. Thomas Rome is mostly remembered today for his purchase and use of an Edison phonograph machine in the late 1890s and the sound recordings he made with this machine at the Warrnambool Industrial and Art Exhibition of 1896-7. These recordings were found intact after Rome’s death and are regarded as the earliest sound recordings still surviving in Australia today. This sample boot is of great significant as an example of the bootmaker’s art in the early 20th century and as a memento of Thomas Rome, important in Warrnambool’s history as a businessman and in the history of sound recording in Australia. This is a small sample black leather boot (probably a lady’s boot). It has double ridged stitching across the instep with a soft leather upper part and stitching separating the soft leather section from the smooth leather. The right side of the boot has seven button holes and seven buttons attached with metal clips. The sole is leather with a small heel and the name of the owner stamped on the sole. ‘10’ ‘T.J.Rome’ thomas rome, history of warrnambool, antique lady's boot, leather boot vintage

This is the second edition of a book published originally in 1851. It is an early work concerned with the recording of aboriginal languages and was published in Geelong. The author, Daniel Bunce (1813-1872) was a botanist who went on journeys with aborigines in Victoria in 1839 and later in 1846 joined Ludwig Leichhardt’s second expedition in his attempt to cross Australia from east to west. This was unsuccessful. Bunce’s experiences in 1839 and in 1846 enabled him to write his book on aboriginal languages. In 1858 Bunce became the Director of the Geelong Botanic Gardens and designed and planted out the gardens. No information has been found on Noel Hallowill. This book is of antiquarian interest as an early dictionary of aboriginal languages and as a book written by the botanist, Daniel Bunce. This is a hard cover book of 60 pages. The cover is yellow with black lettering. There is an ornamental border around the printing. There are two blue stamps of the Warrnambool and District Historical Society on the front cover and on the first page. The book is bound with brown tape. The book has a Preface, an Introduction and sections on the aboriginal languages in areas of Victoria and beyond. A copy of a letter from the explorer, Ludwig Leichhardt, is included at the end of the book. Stamp of ‘Noel Hallowill’ (name unclear) daniel bunce, aboriginal languages, ludwig leichhardt

This metal plate machine used plates that contained names, addresses and classifications of each State Electricity Commission of Victoria employee working on the Kiewa Hydro Electric Scheme. The plates were put through the machine onto pay envelopes.See also: KVHS 1046, KVHS 1233The S.E.C.V. employed many people on the Kiewa Hydro Electric Scheme and used the latest technology of the time to pay each of them including providing each one with a pay slip. Metal table with the addressograph machine set into the middle section. The electric machine is belt driven and controlled by three 52 cm long metal pedals. The operator uses 5 stops, 2 knobs and 1 winder while sitting at the machine. There are 5 extra metal parts (or pieces) which belong to this machine. Ref. KVHS 1046 - Ink Rolls - Labelling Cartridges for Addressograph MachineMetal plate attached to front of machine which reads "Class 22000 Serial No. B-01547. Addressograph regd. Addressing machine. Patents Pending Made in England Addressograph Multigraph Limited London.addressograph machine. state electricity commission of victoria. kiewa hydro electric scheme. payroll. office work.

Frederick Perkin Stevens was a prominent in business and community matters. He also presented the peal of three German bells in 1881 as a memorial to his and Jane’s son.. These windows are among the earliest stained glass windows in Christ Church and because of their position make a strong visual impact in the church. Further, Frederick later married Emma Bews, sister-in-law of the Reverend Peter Tuelen Beamish, first Vicar of the Parish of Warrnambool (for a period of 45 years 1850-1895,), thus consolidating his association with the church. Three lancet stained-glass windows, east wall, main nave, above the High Altar. Presented by Frederick Perkins STEVENS in memory of his wife Jane (nee RULE), born abt 1821, died 1868. The windows from left to right depict the Baptism, Crucifixion and Ascension of Jesus. Transversing the lower section is a depiction of the Last Supper. Running across the bottom of the windows is the inscription. Left window: IN MEMORIAM JANÆ VXORIS CARISSIMA REDEMPTORI SVO IN GREMIVM COMMISIT SE ILLAM INTER BEATOS CITIVS Centre: OVAM DISIDERIO SVMMO ANNOS XLVIII NATUM FREDERICUS STEVENS CONJVX VIDVVS QVI REVISVRVM SPAM LÆTAM AMPLECTITVR Right: SEPTIMO ANTE KAL SEXT A.D. MDCCCLXVIII PAVLISPER INTER VIVOS MORATVS HANC FANESTRAM POSVIT This may be translated as: "This window was erected in memory of Jane, his beloved wife, whom at the age of 40 years on the 26th day of July, 1868, with deepest grief and love he committed to the bosom of her Redeemer, by her bereaved husband, Francis Stevens, who tarrying a little while among the living, embraces the hope of meeting her speedily, if it may be, among the blessed."

This Agers Telegraphic Primer or skeleton telegram guide contains a list of 19000 words which could be used by a business firm to send telegrams overseas in code form. The book once belonged to the Warrnambool firm Cramond and Dickson on the corner of Liebig and Timor Streets which opened a branch of their drapery business in London in 1868. By an agreement with the Reuters Telegram Company in 1899, the code word “sferalcea “ was used for the transmission of telegrams between the two shops. Messages of a general kind were set out at the back of the book: eg: the code word septicity stood for the message, “answer must be here not later than today twelve noon.” The selected words which were used by Cramond and Dickson’s have hand written entries beside the code word. These code books were used to save money and also to improve security.This book has significance on a number of levels. It has local historical significance, is well provenanced. It belonged to one of Warrnambool’s earliest and longest running businesses. The book itself, belonged to the era of early telegraphic communication and as such has wider historical significance.Black soft leather cover with gold lettering, pink inside front and back covers. 312 pages. Up to page 200 the book has words with spaces beside each word to make entries. The back section contains lists of words. Some loose pages and notes contained within the book. Typed page inside front cover from Reuters Telegram Company Limited. Ager’s Telegraphic Primer or skeleton telegram code: consisting of 19000 good telegraphic English words with appendix. Purple stamp inside front cover: Dr Ager 1 Foulden Road Stoke Newingtonwarrnambool, warrnambool history, cramond & dickson, agers telegraphic primer, agers telegraphic primer, reuters telegram company

This is a marble stopper bottle that came from the Warrnambool aerated waters factory of John Fletcher. This bottle was filled upside down so that as soon as the filling stopped the marble was forced down to seal the bottle against the rubber ring. Pressure inside the bottle would keep the marble pressed against the top of the bottle. To open the bottle the marble was pressed down where it has fallen into the neck chamber below. The marble stayed inside the bottle when it was tilted for drinking. John Fletcher worked as a young boy at Rowley’s cordial factory in Banyan Street Warrnambool. He then worked for John Davis who had established the Union Cordial Factory in Koroit Street in the 1860s. In 1885 Fletcher bought John Davis’ business and operated it until 1930. It was then bought by Ralph Reeves. John Fletcher manufactured soda water, tonic waters, lemonade, ginger ale, sarsaparilla, cordials, hop beer and hop bitters. This bottle is of some significance as an example of a marble stopper bottle and as a memento of the Warrnambool soft drinks business of John Fletcher. He was a prominent businessman in This is a mauve-coloured glass bottle known as a marble stopper bottle. The base and body are round with the top part of the body heavily indented to form a narrow opening leading to the neck. The neck is rounded and slightly tapering to the moulded round top. A green glass marble is loose in the neck section. The rubber ring at the top of the opening is missing. The details of the soda water manufacturer are embedded into the glass on the sides. ‘John Fletcher Trade Mark (crown symbol) Warrnambool’ ‘Soda Water’ ‘M’ john fletcher, warrnambool, cordial manufacturers in warrnambool, history of warrnambool

This frame contains two as yet unidentified soldiers from two of Australia’s earliest overseas conflicts. The WW1 soldier has the rank of Captain and the Boer War soldier has the three stripes of Sergeant. It is possible that he belongs to the Coronation Contingent of Edward V11 in 1902.These soldiers were selected form all over Australia with 42 coming from Victoria. The Australian War Memorial cites a number of approximately 16000 soldiers who fought in the Boer War from 1899-1902. Of that number 282 died in action or as a result of wounds while around 320 died as a result of disease and accidents. Six received the Victoria Cross as well as other awards for bravery. The First World War had more drastic consequences for Australia. From a population of less than 5 million, 416809 men enlisted of whom over 60,000 were killed with 156000 wounded gassed or taken prisoner. Australian fought from 1914-1918 from Egypt, Turkey, and the Western Front in Europe. These photographs are representative of many photos which are kept in remembrance of Australian soldiers who fought in wars particularly the two world wars. The Boer war photo is a rarer one.This bi- fold photo frame is rectangular in shape with a rounded section at each top. It is leather in composition and has the Rising Sun insignia in each arch which appears to be metal. There are glass covering two photographs one of a Boer War soldier and the other of WW1. It is hinged in the middle with a double layer of leather which is broken .The Boer war photograph has a coloured flag and medal ribbons. The two Rising Sun badges have Australian Commonwealth Military Forces. The frame itself has J C Vickery Regent St W stamped on the back in gold with a crown above it. The photograph of the WW1 soldier has Hana Studio Ltd 22**** which although unreadable has been matched with another photograph to read,” 22 Bedford St Strand London. The photograph of the Boer War soldier has no studio identity. warrnambool history, unknown soldiers of warrnambool, boer war soldier, world war 1 soldier

These items are among several tools that are believed to have belonged to the Warrnambool carpenter and businessman, Henry Phillips. English-born Henry Phillips (1821-1896) came to Australia with his wife Elizabeth in 1849. They lived for some time in Port Fairy. In 1865 Henry formed a partnership with Christopher Beattie and established the Warrnambool undertaking business of Beattie and Phillips. This business continued on after the deaths of the founders and lasted until the year 2000. In Warrnambool Henry Phillips was involved in the management of the Mechanics Institute. These nine tools are small wooden planes, similar in size and design. In each tool the main wooden section is rectangular in shape with an additional wooden piece attached to one side. In each a metal blade has been inserted at an angle into a slot on top of the main wooden piece and a small wooden piece rests on the blade. The blade protrudes at the base of the main wooden piece to form a planing mechanism.vintage tools, henry phillips, warrnambool

Text on rear, “Mainland Albania, Macedonia, Thraki - Crete - Greek democracy - Expedition memorable medal 1940 - 41 - We award - The participant of 1940 - 41 expedition - defend your Country, Athens 12.2.80, Minister for Defence Eyagelos - Averooh Jusitcha” Certificate awarded to John Eric Wiles VX16067, refer Cat No 5410P for his service details.Certificate, paper light yellow colour background, each side a column with top section over, under is a green leaf arrangement followed by Greek print, a centre name hand written in “Mr J. E. Wiles”, bottom stamped on LH side, RH side is dated. On rear a typed out and stuck is the English wording of the front also a typed piece re the recipient.On rear taped, “J. E. Wiles 2/7th INF”certificates, greece crete, wiles

This Gear box universal, with its Cone assembly ( inc lens) in conjunction with Magazine 500 exposures unit ( see CAT 5561) is part of the F22 aerial camera assembly. As an assembly, the type F22 aerial camera came into RAF and RAAF service c1942. It was used by the RAF over Europe and by the RAAF extensively through the Sth. West Pacific area of operations, during WW2. This type of camera was used through the Vietnam war up to the early 1980's. The F22 camera assembly when mounted in the reliable Canberra aircraft, did aerial survey work in PNG, Indonesia, Malaysia and Sumatra and the Australian mainland. This type of camera was used in Spitfires, Mosquitos, Avro Lincolns and Canberra aircraft.Heavy, metal construction. The base is a rectangular box shape and mounted to that is a funnel shaped tube. Inside the tube are numerous small baffles around the sides painted matte black. The box has a 7 pin electrical connector. The box section can be opened by releasing catches. It has a timber base. Near the mouth of the tube, outside, is a panel with a slot and indentations F5.6 F8 F11 F16.There is a tape label near mouth if tube with writing embossed "LENS S/NO 2767849" The box has a label "GEARBOX/UNIVERSAL. MODEL 14A/4249 SERIAL No. 1685"aviation, reconnaisance, camera, photography

Made pre WW2, could have been used in WW2 and KoreaWooden Grips are attached to a single edge blade by four screws. Bayonet locking section has a clearing hole. The right hand grip is stamped with the number "2" indicating it is from the second Military District (N.S.W.) The blade curves up to a point. The blade is made of steel and has a full length fuller. It is complete with a leather and steel scabbard marked Mangovite 41. It is a Pattern 1907 Bayonet. The ricasso R.H.S. is marked with 24, broad arrow, and an X, which indicates sold out of service. The Ricasso L.H.S. is marked with a Kings Crown, 1907,and 39 RE