Displayed at History HouseHand-made fabric doll. Cotton body (stocking material?), cotton print fabric (red and white flowers and squares on black background) for dress. Embroidered belt (green and gold), bonnet and cuffs. Felt boots with blue and green stitching. Beading at base of skirt in red, white, green, yellow and clear beads (plastic). Stuff with dried plant material. Red ribbon tied around waist. Curly brown hair (human?). Embroidered face.toy, doll, childhood

This handmade green glass bottle was made using the turn-moulded or rotated-moulded method, a variation of the mould-blown process. The bottle has the remnants of a cork seal in its mouth. It possibly contained ginger beer, soda or mineral water, flavoured drinks, liquor or wine. TURN-MOULDED BOTTLE production method This bottle was handmade using the ‘turn-moulded’ process, one of a variety of mould-blown processes that followed the earlier mouth-blown method. The maker would add a portion of hot soft glass to the end of his blowpipe then blow air through the pipe while placing the end inside a bottle mould. The mould was then turned and twisted, giving the bottle a round, seamless body, and usually a round indented base. The cooled body of the bottle would then be finished with the addition of an applied top. A small amount of soft glass would be applied to the top of the bottle and a lip would be formed using a tooling implement. A concentric ring would also form below the lip, caused by the rotated lipping tool. The bases of bottles made with the turn-moulded method were generally not embossed but would commonly have a mamelon or ‘dot’ in the centre of the base. SEALING THE BOTTLE After filling this type of bottle with its contents it is then sealed with a straight, cylindrical cork with the aid of a hand operated tool called a bottle corker. The bottle corker compresses the cork as it is driven into the bottle. Once inside the bottle the cork expands evenly into the opening to tightly seal the contents – the denser the cork the better the seal. This turn-moulded glass bottle is made distinctive due to its round seamless body and indented base.Bottle, dark green glass. Handmade turn-moulded bottle with seamless body and tooled lip. Deeply indented base has push-up mark with a ‘mamelon’ bump in the centre. Bottle is straight from base to half height, then tapers to a shoulder over the next quarter, than almost straight up to the mouth. There is a portion of cork in the bottle’s mouth and dry remnants in the bottle’s base. Possibly used for ginger beer. Produced in 1880s to 1910’s. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, green glass bottle, handmade glass bottle, bottle with indented base, turn-moulded bottle, rotate-moulded bottle, tooled lip on bottle mouth, applied lip bottle, bottle corker

This handmade green glass bottle was made using the turn-moulded or rotated-moulded method, a variation of the mould-blown process. The bottle has the remnants of a cork seal in its mouth. It possibly contained ginger beer, soda or mineral water, flavoured drinks, liquor or wine. TURN-MOULDED BOTTLE production method This bottle was handmade using the ‘turn-moulded’ process, one of a variety of mould-blown processes that followed the earlier mouth-blown method. The maker would add a portion of hot soft glass to the end of his blowpipe then blow air through the pipe while placing the end inside a bottle mould. The mould was then turned and twisted, giving the bottle a round, seamless body, and usually a round indented base. The cooled body of the bottle would then be finished with the addition of an applied top. A small amount of soft glass would be applied to the top of the bottle and a lip would be formed using a tooling implement. A concentric ring would also form below the lip, caused by the rotated lipping tool. The bases of bottles made with the turn-moulded method were generally not embossed but would commonly have a mamelon or ‘dot’ in the centre of the base. SEALING THE BOTTLE After filling this type of bottle with its contents it is then sealed with a straight, cylindrical cork with the aid of a hand operated tool called a bottle corker. The bottle corker compresses the cork as it is driven into the bottle. Once inside the bottle the cork expands evenly into the opening to tightly seal the contents – the denser the cork the better the seal. This hand made, green glass bottle is representative of bottle making before mass production and is made distinctive due to its round seamless body and indented base.Bottle, dark green glass. Handmade turn-moulded bottle with seamless body and tooled lip. Deeply indented base has push-up mark with a ‘mamelon’ bump in the centre. Bottle is straight from base to half height, then tapers to a shoulder over the next quarter, than almost straight up to the mouth. There is a portion of cork in the bottle’s mouth and dry remnants in the bottle’s base. Possibly used for ginger beer. Produced in 1880s to 1910’s. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, green glass bottle, handmade glass bottle, bottle with indented base, turn-moulded bottle, rotate-moulded bottle, tooled lip on bottle mouth, applied lip bottle, bottle corker

‘The Art of the Japanese Package’ was an exhibition that toured to 10 Australian and 11 New Zealand public galleries in 1979 and 1980. The touring exhibition comprised 221 objects of traditional Japanese packaging which extended from ceramics, wood and paper to woven fibre containers. At the conclusion of the tour, The Japan Foundation and the Crafts Board of the Australia Council donated the vast majority of the exhibition to the Ararat Gallery for its permanent collection. Combining the natural qualities of bamboo, paper and straw with delicate craftsmanship, these unique objects express Japanese aesthetics as applied through fibre crafts. In Japan, the qualities and traits of natural materials are exploited rather than hidden. The texture of straw, the septa of bamboo are not concealed but lovingly incorporated into the whole. In 1979 Hideyuki Oka, curator of ‘The Art of the Japanese Package’ wrote: “In no way self-conscious or assertive, these wrappings have an artless and obedient air that greatly moves the modern viewer. They are whispered evidence of the Japanese ability to create beauty from the simplest products of nature. They also teach us that wisdom and feeling are especially important in packaging because these qualities, or the lack of them, are almost immediately apparent. What is the use of a package if it shows no feeling?” The descriptions of the featured objects were written by Hideyuki Oka, curator of ‘The Art of the Japanese Package’, 1979.Gift of the Japan-Australia Foundation and the Crafts Board of the Australia Council, 1981The furoshiki, the ubiquitous square of cloth that is used in Japan to wrap practically anything and everything to make it portable, appears here as the wrapper for boxes of dried bonito from a shop in Tokyo. There is, of course, no limit to design and colour among furoshiki, and they also vary in size, although the ones most commonly used are about three feet square. The furoshiki seen here are emblazoned with a character that has the doubly felicitous meaning of 'congratulations' and 'long life'. - Professor Hideyuki Oka, curator.japanese art, japanese packaging, tsutsumi, gift giving

‘The Art of the Japanese Package’ was an exhibition that toured to 10 Australian and 11 New Zealand public galleries in 1979 and 1980. The touring exhibition comprised 221 objects of traditional Japanese packaging which extended from ceramics, wood and paper to woven fibre containers. At the conclusion of the tour, The Japan Foundation and the Crafts Board of the Australia Council donated the vast majority of the exhibition to the Ararat Gallery for its permanent collection. Combining the natural qualities of bamboo, paper and straw with delicate craftsmanship, these unique objects express Japanese aesthetics as applied through fibre crafts. In Japan, the qualities and traits of natural materials are exploited rather than hidden. The texture of straw, the septa of bamboo are not concealed but lovingly incorporated into the whole. In 1979 Hideyuki Oka, curator of ‘The Art of the Japanese Package’ wrote: “In no way self-conscious or assertive, these wrappings have an artless and obedient air that greatly moves the modern viewer. They are whispered evidence of the Japanese ability to create beauty from the simplest products of nature. They also teach us that wisdom and feeling are especially important in packaging because these qualities, or the lack of them, are almost immediately apparent. What is the use of a package if it shows no feeling?” The descriptions of the featured objects were written by Hideyuki Oka, curator of ‘The Art of the Japanese Package’, 1979.Gift of the Japan-Australia Foundation and the Crafts Board of the Australia Council, 1981The furoshiki, the ubiquitous square of cloth that is used in Japan to wrap practically anything and everything to make it portable, appears here as the wrapper for boxes of dried bonito from a shop in Tokyo. There is, of course, no limit to design and colour among furoshiki, and they also vary in size, although the ones most commonly used are about three feet square. The furoshiki seen here are emblazoned with a character that has the doubly felicitous meaning of 'congratulations' and 'long life'. - Professor Hideyuki Oka, curator.japanese art, japanese packaging, tsutsumi, gift giving

A very marked and damaged brown fabric covered book with the faded title The Twins of Emu Plains printed on the front cover with twin girls sitting on a window seat reading a letter. The back cover has dried mould at the bottom and also inside at the back on some pages. The inside front and back of the spine is showing signs of breaking away from the covers. There are a few illustrated black and white plates. Foxing is seen on the edges of the pages. p.256.fictionTwin 16 year old sisters bravely assist their father on his farm while Emu Palins is in the grip of a disastrous and seemingly endless drought. Being young the twins treat trouble as a tremendous joke , and by their lightheartedness and practical help their harassed parents are able to carry on. Adventure and incident abound in this tale.adventure fiction, farm life fiction, drought - australia

Shirt - Khaki, polyester cotton, short sleeve with shoulder epaulettes and plastic buttons. Right shoulder patch parachute wings, dark red and white embroidery on khaki patch. Left shoulder patch - "THE AUSTRALIAN ARMY" Gold and red embroidery on khaki patch, Rising Sun and Crown. Cotton manufacturers label on back below collar with black print information and owner's label.Cotton label information - black ink print. "ADI/ 1992/^/ SIZE 44/ 8405.66.133.5959/ SERVICE NO/ NAME/ 65% POLYESTER/ 35% COTTON/ DO NOT BOIL OR WRING/ MACHINE WASHABLE/ DRIP DRY, IRON LIGHTLY/ WITH WARM IRON" Handwritten blue ink "SCOTT" uniform, army, shirt

The Kew Historical Society's postcard collection includes views of Kew, Melbourne and Greater Melbourne as well as those including overseas scenes sent or received from Europe or the Middle East. They date from the 1890s to the 2000s. These postcards may or may not include the name of the publisher or printer. A number of the cards were published as parts of popular series. A way of dating early postcards is to identify whether the reverse was divided by a central line which became the norm after 1902 in the United Kingdom. However, other postcards produced after this date do not always conform to this print layout.Polychrome postcard of High Street, Kew looking west towards Kew Junction. The photograph was also printed in monochrome format by the publishers, with different names and additions.Reverse - (to) Miss __. J. Thompson, "Dry Lake", Kerang (from) Very sorry indeed to hear of your Mother's illness. Sincerely hope all quite well ere this. Still going about very tired waiting __ being away. Love to all M.B.L.high street -- kew (vic.), postcards -- kew (vic.), horse tram -- kew (vic.)

For Service History refer Cat No. 7877.61. Jacket - dark blue wool/polyester fabric. Battle dress style. Collar, shoulder epaulettes with Sqn Leader rank slides - 3 rank stripes, black and blue ribbons and 'AUSTRALIA" . Left sleeve insignia patch - white embroidery Eagle wings over "AIR FORCE" . Two patch pockets with concealed button flap. Right pocket - metal RAAF Badge, above pocket metal name badge. Left pocket - above service ribbons, blue and yellow ribbon with three rosettes - Long service. Black, red and white ribbon - Defence medal. Stretch ribbing waistband to jacket with plastic and metal zipper closer. Dark blue colour polyester lining with concealed pocket Dark blue plastic buttons with shank, raised emblem crown and wings RAAF. White cotton manufacturers label. 2. Cap - dark blue wool/polyester fabric. Utility cap style with Officers Insignia patch - gold embroidery - Queen's crown with red insert, wings and laurel leaves. Dark blue colour polyester fabric lining. White cotton manufacturers label inside on lining.Manufacturers information - black ink print. 1. "ADA/VIC 2002/ ^/ NSN: 8405 66 146 8842/ SIZE: 105r/ SERVICE NO:/ NAME: / LAUNDRY INSTRUCTIONS/ 50% WOOL 50% POLY/ DRY CLEAN ONLY/ REPRESS WITH DAMP CLOTH/ WARM IRON/ DO NOT SIRO SET/ MADE IN AUSTRALIA" 2. "ADA/ 4500 107475/ JULY 02/ NSN 8405 66 146 6323/ SIZE 62/ SERVICE NO:/ NAME: / DRY CLEAN ONLY/ 50% WOOL 50% POLYESTER/ MADE IN AUSTRALIA" 1. & 2. Handwritten - black ink pen "S.WRIGHT".uniform, raaf, battle jacket, cap, s. wright

After the fire was distinguished and the flood subsided, on his way flying home, the Dogtor heard voices repeatedly on his radio "Calling Flying Dogtor". A sick voice asked for the Dogtor's help in the main street of Ghostville, the old mining town across Dry Gulch Gully, now a ghost town. He got to the abandoned address, 13 ("unlucky number") Spook Street. The Dogtor is about to open the door...The Flying Dogtor" series was broadcast on Australian Television Network (later becoming the Seven Network) between February and April 1964 (see item D254 for schedule).Typewritten, carbon copy, foolscap, 2 pagesPage 1: Left hand side has been amended and is attached with tape. Written corrections on right hand side.the flying dogtor, robin boyd, crawford productions, manuscript

Black and White - tram 36 (Victoria St), at Stones Corner, picking up 6 passengers. The man is carrying a Gladstone bag. The photo is looking west and has a Top 4 dry cleaners shop sign in the background. Taken by A T Miles 27/11/1969. The photo likely to have been taken before a 48-hour strike by SEC workers that commenced on that day. See item 8774. Yields information about services to Victoria St.Photograph - black and white print with notes on rear. A T Miles stamp and location and date notes.tramways, trams, stones corner, victoria st, bridge st, passengers

Trousers - khaki, wool serge fabric, plastic buttons, five button fly, fob pocket, two side pockets, one back pocket with button down flap. Lining cotton and polyester fabric. One manufacturers label on lining of back pocket with black print information. Mending patch attached to label.Cotton label information - black ink print. "CONWAY BROS PTY LTD/ ^/ CLASS 8405-66-025-6187/ size & waist 305/ Dry clean only/ Re=press on original seams/ Creases set by Si-ro-set/Mending Patch attached."uniform, army, battle dress trousers

Part of WW2 medical kit (see 359.1)BROWN COLOURED SQUARE SIDED GLASS BOTTLE WITH BLACK SCREW TOP AND PAPER LABEL. Contains liquid.Label Front: Sarax Kuraburn. For the treatment of BURNS,SCALDS AND sUNBURN Label Side: Allow to dry on the skin before putting on wearing apparel to avoid staining the clothes. Label Side: DIRECTIONS: Dab on lightly and repeat in two hours if necessary. Applied early, it prevnts blistering.

The item is a representative example of previously standard issue uniform and is in excellent condition. As a set alongside 0040.2, the uniform has aesthetic significance in its design, incorporating the Disruptive Pattern style of camouflage which has its roots in the 1980s and continues to be adapted into uniform design by the Defence Force.Field shirt in disruptive pattern colours of green, khaki and browns. Long sleeve with five buttons up the front, two chest pockets with button-down flap pockets. Both sleeves are reinforced from the elbow down to the cuff; cuffs are fastened with a single plastic button. Above the right chest pocket is a patch with embroidered inscription in black thread on disruptive pattern backing. Shirt also features plain epaulette's on both shoulders, fastened by plastic button. Manufacturer's label on interior reads "ADI P/L/VICTORIA/1989/[broad arrow]/8415.66.130.0033/SIZE. 100R/NAME/SERVICE NO./MACHINE WASHABLE/DRIP DRY ONLY/DO NOT IRON/DO NOT STARCH/DO NOT BLEACH" Patch above chest pocket reads "PARKER"camouflage, uniform, australian defence force, disruptive pattern

Australia's worst natural disaster, fed by extreme temperatures, tornado-like wind speeds and tinder-dry land, culminated in the disaster we now know as Black Saturday, February 7, 2009. Before the sun would set on the blackest day in Australia's history, thousands of hectares would become blackened landscape and an unparalleled loss of lives could only mean that many areas would never be the same again.fay bridge collection, black saturday, kinglake, victorian bushfires - 2009

The geometric pattern mimic Ukrainian embroidery design,using straw marquetry technique (which is similar to that of wood marquetry). The wheat straw was soaked in different pigments to achieve the required shades,dried,split and ironed flat. Then cut into various sizes and shapes to create this pattern. The pieces where then glued onto a backing board.The backing board was then glued on the back of the photo album. This album was received as a birthday gift in early1960's.This form of straw art is very rarely seen today.Book is black.Back page is coloured straw design. photographsphoto, book, straw, ukrainian design, 1960, family dutka

Tobacco farming began circa 1960 in the Kiewa Valley and consequently became one of its major industries. Many of the Italian families were involved in tobacco farming.Historical: This equipment was used on one of the first tobacco farms in the Kiewa Valley at Mongans Bridge. The frame holding the thermometers was home-made showing the resourcefulness of farmers living in the Kiewa Valley. Provenance: This tobacco farmer came from Italy and was sponsored to visit a tobacco farmer in Myrtleford to learn how to grow tobacco so that he could transfer those skills to his own farm in the Kiewa Valley.Used for monitoring the temperature and humidity in the kiln during the drying process of the tobacco leaf (the thermometer is missing the water holder) 2 thermometers attached to a steel attached to an old rusty tin frame with handle at the top enabling it to be hung, using wire, to hook on the wall. Tin frame has cap on it coming out to protect the thermometers and a base for standing the frame up. 1 thermometer has a hollow piece of material (or cord) strip (125 mm long) attached to the bottom of it.Beside the thermometers is inscribed on steel - the lines for measuring and numbers from 40, 60 (by 20s) up to 240.tobacco. kiewa valley. mongans bridge. wet and dry bulb thermometer. silvano rossaro.

Polyester long sleeved khaki dress shirt. Left and right breast pockets with buttons. Buttons on the cuff of each sleeve. Six buttons down the front plus one spare. Epaulets on each shoulder with buttons securing.Plain back. Label inside at the back of the neck states - ADI 1991 Size 43/86. 8405.66.088.7110. Service No. Name. 65% Polyester 35% Cotton. Do not boil or wring. Machine washable, drip dry, iron lightly with warm iron. Manufacturer - ADI 1991dress shirt, polyesters

This handmade glass bottle was recovered from the wreck of the 1895-1902 ship Inverlochy and is part of the John Chance Collection. The bottle has side seams that extend from base to mouth, indicating that it would have been made in a mould. The parallel, diagonal lines are likely to have been made by the molten glass being mouth-blown into the mould. The mould would have also had the pattern for the embossed numbers in the base. The seamless applied mouth would have been added after the bottle was removed from the two-piece mould. The even neck of the bottle would have probably been sealed with a cork or glass stopper. Bottles similar to this one were used for medical (apothecary) and cosmetic purposes. Bottles with these features date from around the late 19th to early 20th century. Bottles began to have embossed numbers on the bases from the late 19th century and the practice continues into modern times. The numbers may represent the date of manufacture i.e. “4188” may be 4th January 1888. It may instead be the date of the patent or design pattern number. This bottle may have been made around 1888 and the latest it could have been made was 1902, the year of the wreck of the Inverlochy. THE INVERLOCHY (1895-1902) - The Inverlochy was a steel sailing barque built in Scotland in 1895 for international trade. In 1902 the Inverlochy left Liverpool under the command of Captain E.R. Kendrick. There were 21 officers and crew and the captain’s wife Mrs Kendrick, on board, bound for Australia with cargo that included tools, chemicals, liquor (beer, whisky, stout, rum, and brandy), steel, iron, wire netting, hoop iron, tinplate and pig iron), and steel wire for the Melbourne Tramway Company, tiles, soap, soft goods and earthenware. On December 18 almost at their destination, the Inverlochy ran aground on Ingoldsby Reef at Point Addis, near Anglesea. The crew and passengers left the ship via lifeboat and landed at Thompson’s Creek, then walked about 20 kilometres to Barwon Heads. Salvagers were interested in the 10 miles of cable in the hold. Mrs Kendrick’s ‘high grade’ bicycle was amongst the items salvaged but she lost her jewellery and two pianos. By February 1903 the ship had broken up and objects such as bottles and casks of liquor were washed ashore. Bad weather shook the wreck in June 1903, causing the ship’s spars and figurehead to be washed ashore. This glass bottle is historically significant as it represents methods of storage and manufacture that were used from the 19th century and into the early-20th century, before machine made bottles were becoming common. The shape and size of the bottle are similar to bottles used for medical and cosmetic purposes in that period. The glass bottle also has significant as it was recovered by John Chance, a diver from the wreck of the Inverlochy in the late 1960s to early 1970s. Items that come from several wrecks along Victoria's coast have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. This glass bottle is significant because of its historical connection to the barque Inverlochy, which is an example of a commercial international steel sailing barque and is listed on the Victorian Heritage Database VHR S338. The Inverlochy is significant for its cargo, which is a snapshot of the kind of goods imported into Australia at the turn of the 19th century, including cable for the Melbourne Tramway Company. The wreck of the Inverlochy is important as an accessible dive site that shows the remains of a large international trading vessel and its contents. It is valuable for an insight into Victorian era of shipping and maritime history. Bottle; clear glass, round, handmade. Narrow lip is flat across top and on side edge, neck is straight, about a third of the bottle’s height. The shoulder is rounded, and the body has straight sides with two side seams from below the lip to the base, which is shallow. Outer glass surface is rough, inner surface has areas of dried, light coloured substance. The body has several diagonal parallel lines and areas with opalescent shine. Base has embossed inscription. Embossed inscription on base "4188".flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, john chance, inverlochy, scotland, captain e.r. kendrick, melbourne tramway company, ingoldsby reef, handmade, glass bottle, apothecary, cosmetic, mould blown, vintage, two-piece bould, point addis, medicine

Colour photograph of a fundraising wine bottle label promoting the centenary of the Menzies Creek State School. Label is off-white with red printing. 'GORDO RIESLING/An unusual blend/ of Gordo and Riesling grapes specially/ prepared, giving a Moselle style taste/with a pleasant Dry Riesling finish, and ready/to be enjoyed now./The grapes were grown and vintaged at/ Angove's Renmark vineyards.' The label features the (then) school logo, designed to mark the school's centenary, with artwork by Tanya Mayer and Konrad Matta.

Newspaper clipping from The Courier, Ballarat, dated Wednesday 28/6/1972, titled "Almost a dry run" showing a photograph of road machinery parked in the middle of Victoria St. during heavy rain the previous day. Work in removing tram line was completed the previous Monday, but the surfacing had yet to be completed. Photo taken looking east near the Rodier St. intersection. One of a large group of newspaper cuttings from John Bainbridge, 7/4/02.track removal, tram track removal, crb, victoria st

‘The Art of the Japanese Package’ was an exhibition that toured to 10 Australian and 11 New Zealand public galleries in 1979 and 1980. The touring exhibition comprised 221 objects of traditional Japanese packaging which extended from ceramics, wood and paper to woven fibre containers. At the conclusion of the tour, The Japan Foundation and the Crafts Board of the Australia Council donated the vast majority of the exhibition to the Ararat Gallery for its permanent collection. Combining the natural qualities of bamboo, paper and straw with delicate craftsmanship, these unique objects express Japanese aesthetics as applied through fibre crafts. In Japan, the qualities and traits of natural materials are exploited rather than hidden. The texture of straw, the septa of bamboo are not concealed but lovingly incorporated into the whole. In 1979 Hideyuki Oka, curator of ‘The Art of the Japanese Package’ wrote: “In no way self-conscious or assertive, these wrappings have an artless and obedient air that greatly moves the modern viewer. They are whispered evidence of the Japanese ability to create beauty from the simplest products of nature. They also teach us that wisdom and feeling are especially important in packaging because these qualities, or the lack of them, are almost immediately apparent. What is the use of a package if it shows no feeling?” The descriptions of the featured objects were written by Hideyuki Oka, curator of ‘The Art of the Japanese Package’, 1979.Gift of the Japan-Australia Foundation and the Crafts Board of the Australia Council, 1981Hand-cut sections of cryptomeria wood make a simple but dignified box for dried noodles. The shop in Akita City that sells this product was founded in 1665. The label, with its numerous seal impressions, has the look of an old-time legal document, and this is fitting, for it is actually the shop's pedigree. It records, among other things, the name of the founder and the fact that the shop, originally located in Inaba, once sold its noodles to the feudal lord of the region by special appointment. - Professor Hideyuki Oka, curator.japanese art, japanese packaging, tsutsumi, gift giving

Stuart Hats commenced manufacturing hats in about 1948 and closed their factory in Orbost around 1953 probably because of the high transport costs. The company's head factory was in Melbourne. The hats made in Orbost were sold all over Australia as well as in Melbourne at Myers and David Jones. Orme Andrews Ladies' Wear was the only store in Orbost to stock the locally produced Stuart Hats. The building became first a Dry Cleaners and then a private home.Stuart Hats was a significant manufacturing business in Orbost in the 1950's employing nearly 20 local people.A woven straw hat with a wide brim. It is a natural colour with braid as a hat band. Inside are two sewn on pieces for a pink tie.millinery stuart-hats clothing accessories hats

70 pages : illustrations, facsimiles, mapsnon-fictionduke and orr dry dock, polly woodside, national trust, yarra river, south wharf, interest group

The moustache cup is a drinking cup with a semicircular ledge inside. The ledge has a half moon-shaped opening to allow the passage of liquids and serves as a guard to keep moustaches dry. It is generally acknowledged to have been invented in the 1860s by British potter Harvey Adams (born 1835). Moustaches flourished throughout the Victorian era. Men often applied great gobs of melted wax to the moustache to keep it nice and stiff, with every hair in place.Between 1920 and 1930, moustaches progressively began to go out of fashion and hence moustache cup production gradually dwindled. This cup is an example of a common domestic item of its time. The Nixon families were among the earliest settlers on the Snowy River.A drinking cup with a semi-circular ledge inside - a moustache cup. It is white with a mauve stencilled border design and pink roses in the centre.Bottom - 34 472/5moustache-cup china domestic-items crockery

Always known as Gus, he was actually George Gervasoni. Born to George Gervasoni and Annie Pedretti in 1909, Gus was a member of the Daylesford Fire Brigade and played Australian Rules Football for Dayelsford. George was the Australian born son of Italian Luigi Gervasoni and German Eliza Ritzau both of Yandoit Creet. Annie was the Australian born daughter of Swiss Martino Pedretti and Sarah Ind, the daughter of English exile George Ind, both of Dry Diggings. Black and white photograph of a young man, Gus Gervasoni, in an handknitted Daylesford Football Club guernsey..gus gervasoni, george gervasoni, daylesford football club, australian rules football

For Service History Refer Cat No. 7877.61. Jacket - white colour polyester viscose fabric, mess dress style - Summer. Collar and long lapels. Shoulder tapes for epaulettes. Gold colour plastic buttons with shank and metal pin. Raised emlem, crown and wings - RAAF. Lining - white colour polyester fabric. White cotton manufacturers label inside right side of jacket. 2. Shirt - white colour polyester/cotton fabric, dress shirt, collar, stiff front with buttonholes for studs and long sleeves with double cuff and buttonholes for cufflinks. White colour plastic buttons. White colour polyester manufacturers label, below collar inside. 3. Bowtie - black colour polyester/cotton fabric. Bowtie is prefolded and stitches on ribbon with black metal hook and ring closer.Manufacturers information - black ink print. 1. "ADI/ VICTORIA/ 1993^/ 8405-66-131. 8010/ SIZE 110R/ TO FIT CHEST 110/ SERVICE NO/ NAME/ 65% Poly 35% Visc/ Dry Clean Only". 2. "RA/ PHILIPPE ANTON/ MADE IN AUSTRALIA/ 44".uniform, raaf, mess dress, summer

Hat, yellow coloured with brim, cotton & polyester fabric with black / blue / white / green emblem printed on front. Emblem has black print, white dove over the top of a green island shape and has a blue round background. Handwritten black felt tip pen: “TJM” Printed label inside brim: “The Hat Belongs To ...... Phone No ...... 65% Polyester 35% Cotton” Size L Made in China Washing Instructions Gentle Hand Wash in Luke Warm Water Air Dry Lying Flat on a Toweluniforms - military - army, costume - male, headwear, passchendaele barracks trust, peace monitoring

This wooden condom former has no defined manufacture date and was used in the production of rubber condoms in Melbourne by the rubber goods manufacturer Ansell. Wooden formers of this type were used from 1905 till 1945. The condom former would be dipped tip first into liquid rubber and the covering left to dry, and then the resulting condom packaged and sold. This object was acquired by the Richmond and Burnley Historical Society in the 1970’s on the closing of the Ansell factory located on River St, Richmond. This object has historical significance at a national level, as it is associated with the use and manufacture of sexual health devices within the broader Australian context. It also holds local historical significance as a marker of local manufacturing and industry in Victoria. Alongside these points it is also a large part of the story that surrounds the creation of Ansell Industries as we know them in a modern context. Wooden condom former/ mold. Frame consists of 11 individual upright moulds. Used by the Ansell Rubber Co. Pty Ltd in the production of condoms. Obtained in 1970's from an old factory site occupied by Ansell. None visibleansell, condom machinery, richmond industry, moulds, rubber products, sexual health, contraception, condom

Stanley Lawrence Dawson had the grocery at 148 Union Road during the 1940s. The premises had previously been occupied by J T Poynton (butcher). It passed to A J Griffiths, also a grocer, c 1950 and then became a dry cleaners c1970. Stan was born in Werribee in c1890; died Balwyn in 1956. He married Gladys Elizabeth Goodfellow in 1922. They lived at 272 Mont Albert Road, SUrrey Hills and later at 7 Clapham Road, Balwyn.A black and white photograph of a couple. The man is dressed in a suit, is wearing round glasses, and has a receding hairline. The lady is in a tailored dress and is wearing pearl earrings.grocer, union road, surrey hills, mr stan dawson, mr stanley lawrence dawson, miss gladys elizabeth goodfellow, mrs gladys elizabeth dawson